ERROR: UDLD is rejecting a config that is valid only for the copper port on

I am getting while doing port-configuration. It is taking same configuration in rest nexus 5548 and nexus 5020. Except one nexus 5548.

You can try to find someone in the U.S to give it or sell it to.
You cannot use it.
Sorry

Similar Messages

TS1292 What if I bought an ITunes gift card in the states when my account is in Canada (unknowing that it's only for the US ITunes) can I redeem it in any way?

So on a trip to the states, I bought an ITunes gift card (well 45 dollars worth), took it home ( a 16 hour drive) just to see that it's 'Valid only in the US ITunes store'. Is there any way to redeem my money, or get a US account (I'm from Canada), because I'm not to keen on wasting 45 freaking dollars.

You can try to find someone in the U.S to give it or sell it to.
You cannot use it.
Sorry

I have installed Firefox on my new Mac and Ixquick will not download on the Firefox browser with the message that it is only for the Firefox browser.

Ixquick will not download on the latest version of Firefox on my new Mac.It gives me a message that it is for Firefox.

See also:
*https://www.ixquick.com/eng/download-ixquick-plugin.html
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT201210 Having trouble restoring my ipod touch 4 gen. When i click restore i get an error message saying that " problem downloading software for the "ipod owner's ipod"

When i try to restore my ipod i recieve an error message saying that "problem downloading softwar for the ipod owner's ipod. error (-23) Please help i need to restore because my daughter somehow set a passcode lock on it and didnt know it and does not know passcode.

There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

Server error:Could not find a client that is able to launch the selection.

server error
Hi all,
When i try to run jsp file on server, RAD prompt me this error: Could not find a client that is able to launch the selection.
Please help,
thanks

Hi
A question. The deploy is right?
thank you

WCF Published Orch - Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding

I have an orchestration published as a web service. It was working fine on our test environment, we deployed to production, and now getting this error. The website wouldn't go in the BizTalk MSI, so we copied the files. We reset the Authentication
to match the test system (we are using Basic Auth).
When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error.
I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc.
In both environments, we have a customer calling this webservice.
Also, I don't know what it means "scheme http". We are using https:... on the URL.
I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings.
Thanks,
Neal Walter
http://MyLifeIsMyMessage.net
Web.config:
    <services>
      
      <service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
        <endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
        
      </service>
    </services>
</system.serviceModel>
    <system.webServer>
        <security>
            <authorization>
                <remove users="*" roles="" verbs="" />
                <add accessType="Allow" users="myCustomer" />
            </authorization>
        </security>
    </system.webServer>
Server Error in '/eSecuritelIn' Application.
Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
base address schemes are [https].
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
the exception stack trace below.
Stack Trace:
[InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
are [https].]
   System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
   System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
addBaseAddress) +1082
   System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
   System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
   System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
+36
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
[ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation.
The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +901424
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.0.30319.272

When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
Are you not using the same Binding file?
Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
Old: binding="mexHttpBinding"
New: binding="mexHttpsBinding"
web.config snippet:
<services>
<service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
<endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
<endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
</service>
Also look into the below article- How to fix: "Could not find a base
address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
Moving to https = Could not find a base address that matches scheme
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

The error showing as Fiscal year change has not carried out for the coCd

Hi all,
I am facing a very critical situation. My client has the last closed fiscal year as 2006(from 2006 april to 2007 march).For the fiscal yr. 2007(2007april to 2008 march) they have already finalised and submitted the reports made from some parallel software.They now want to tally this report with SAP system and to adjust the SAP system entries as per this report.This work was running fine.But on 01.04.2009 none of the asset reports are running.The error it's throwing is as-
Fiscal year change not yet made for company code PWAL
Message no. AB059
Diagnosis
You have not yet carried out a fiscal year change for company code PWAL, although the current system date is in the new fiscal year.
Procedure
Carry out the fiscal year change for company code PWAL.
Proceed
The error is quite understandable.We have to close 2007 and then perform the fiscal year change.But the problem is that the adjustment for the year 2007 is not yet complete.Is it the only solution with me that I should close the yr.2007 and again open it after the fiscal yr. change? If that is done can I take care of the adjustment in the posted depreciation? Or is it possible that the system date can be made back to 31.03.2009(very stupid ask!). The real problem is that my client has mistakely created some assets in the year 2007(by AS91 after changing the take over date) those should have been shown in the next year and also some assets are creted in the year 2008 by the same strange method those should be shown in the year 2007.What I am doing now is deleting these legacy assets and creating the new assets in the correct year.And this process is not yet complete.If I close the year 2007, then the depreciation of these legacy assets will also be posted.Later how can I reverse the effect?Also without seeing the reports I can't make the adjustments.Please suggest/advice.
Debabrata

Hi Debabrata,
You have to do all fiscal year closing steps for 2007. When you reopen it you can do a repeat run for 2007. (You can do the reapeat run only for the new/ changed assets.)
Try first to test this in an actual test system (document it and do the same in production). Perhaps as you know when 2009 is open I want to close 2008 in one week. All changes they make in the asset system (change depreciation keys, recalulating,...) can result in postings in 2007 / 2008 what they don't want and later fiscal year problems. You will found a lot off masages about this on the form.

Parts Requirement Create Order Error:Validation Failed for the field - Shipping Method DHL

Trying to create Parts Requirement.
Error message on clicking "Create Order" button: "Validation Failed for the field - Shipping Method DHL"
Please suggest the Setup that needs to be done for this.

Kinck
The same script worked for me in vision (R12.1). You may have issues with your defaulting of a number of attributes that you are not passing in the API (like price list, line type and so on). You may want to check them.
Thanks
Nagamohan

I have a new iPad Air. Can I use plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak. I'm off on holiday and haven't got the capacity to have everything on that I'd like for the kids

Can I use a plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak? I'm off on holiday and haven't got the capacity on the iPad to have everything on that I'd like for the kids.
So basically I want a hard drive with X amount of films etc on. Can I then watch them on my iPad?
Hope this makes sense.

External HDD won't work.
You need something like this:
http://www.seagate.com/goflexsatellite/

HT4847 If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free? So that you are rewarded for the additional devices?

If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free? So that you are rewarded for the additional devices?
If this multi purchase if devices is not rewarded with a larger cloud storage being available, would it then be best to have several separate cloud accounts?
Would you lose the ability to mesh data between devices??? Of could you choose to share a smaller part of the data and yet save the rest of the device data to their own cloud? So in other words, split a devices stored data between 2 different icloud accounts? One community iCloud account for partial data and individual account for data that does not need to be shared with the other devices, however it needs to be backed up. The simpler solutions would be If you have several Apple devices feeding to the same iCloud account, an amount of storage made available per device (ie: 5 units of storage free per device)
~ So that you are rewarded for the additional Apple devices by giving 5 more units of storage or backup space per device

Nobody here is an Apple employee, and my Christmas Season has been great, thanks very much. Neither am I jealous, I just abhor the fact that so many people these days expect more and more for free, in addition to what they already get for free. First world problems...
Obviously Apple do consider people with multiple devices, since the whole purpose of the service is to keep data in sync across multiple devices. Clearly, after consideration, Apple decided to give 5GB of storage for free and provide customers with the option to buy more storage if they want/need more, in line with competing services.
Everyone has their own set of unique circumstances but does that mean everyone should be rewarded with extras for free? At what point should it be considered acceptable to actually pay for additional extras you want?
And by the way, somebody expressing a different opinion, and discussing people's expectations is not being rude. Aren't you from the country that supposedly takes 'freedom of speech' rather seriously?

Encountering Error in webadi : "&Value is invalid. Enter a valid value for the Mapping column &Column"

We are having a custom WebADI, containing a field (Employee Name) which is a LOV.
The LOV has ID : Person ID, Meaning : Employee name, Description : Position Name.
There are multiple records with same Employee name but different Person ID.
If I select an Employee in the LOV which has multiple records (through different IDs), I am getting an error in WebADI:
"Enter a valid EMPLOYEE_NAME.
XX is invalid. Enter a valid value for the Mapping column EMPLOYEE_NAME"
The Query for the LOV is correct and is returning correct records.
Any pointers on this issue highly appreciated.

Hi,
The problem could be with HR security profile attached to the responsibility from where you are launching the spreadsheet. Check it once.
Thanks.

Have been advised by my email provider (recently blocked account requiring password reset) that they will only reset the password after a proven anti viru and malware scan has been done on ipad and iphone. Is this necessary and if so what do i use

Have been advised by my email provider (recently blocked account requiring password reset) that they will only reset the password after a proven anti virus and malware scan has been done on ipad and iphone. Is this necessary and if so what do i use

As KP has pointed out, there actually aren't any anti-virus programs in the App Store. There are a few that allow you to scan e-mail or stuff like that, and a few that provide you with information about malware and new threats for other systems. But none are available that can scan your iOS device for malware, because the security restrictions in iOS do not permit any apps to have that kind of access to anything. Which means that you also cannot be infected with a virus (unless you have jailbroken your device).
If your account got compromised, that had nothing whatsoever to do with your iPad. Someone simply hacked it remotely. Happens all the time. It's really amazing that, in this day and age, e-mail providers are so ignorant of technology and how their own systems get compromised that they would try to require you to run software that does not exist!

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

ERROR: UDLD is rejecting a config that is valid only for the copper port on

Similar Messages

Maybe you are looking for