Error:Unable to determine data basis for virtual InfoCube.

Hi all,
I am working on Virtual cubes. I have created a query on virtual cube which is getting loaded from a transaction cube. I am using a transaction cube which is a copy of standard cube 0BCS_C10 - Consolidation (Company/Profit Center). (Transaction cube).
When I execute the query in BEX it is disconnecting from the server and if I execute the same in transaction RSRT it is showing following errors.
1.Unable to determine data basis for virtual InfoCube.
2.Error reading the data of InfoProvider.
3.System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Will be thankful for suggestions.

Hi Pankesh,
Thanks for the response..
Transaction cube contains data and characteristics of virtual cube are consistent.
I am trying to see the contents of the virtual cube in transaction LISTCUBE, there also its showing same errors.
How can I proceed now?

Similar Messages

BCS: unable to determine consolidation area for data basis B1

Dear gurus,
   I have two consolidation areas B1 and Y1 on the same data basis B1. I want to report the data of consolidation area Y1. I created a query which had the restrictions on consolidation chart of accounts, fiscal year variant, version, fiscal year, posting period and group currency. But when I opened the query with BEx Analyzer, the error prompted like below:
   Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
   Error reading the data of InfoProvider ZCB_B1V11
   Unable to determine consolidation area for data basis B1
The row of the query is Item. I found if I activated the hierarchy of Item, this error occured and if deactivated the hierarchy of Item, the error disappeared.
Please advise. Points will be awarded if helpful.
Thanks in advance.
Jin Ming

Hi Jin Ming,
Something is wrong with your hierarchy.
In my case items hierarchy works fine.
May propose two cases:
1. Which version of your hierarchy, defaulted 100 or not? If not - wait for trouble.
2. Hierarchy are global for all consolidation areas. If you hierarcical structures in different cons areas assigned to different special versions, the I'd not exclude some controversies between globality and special version pecularities.
Hope this helps.

Error :Unable to retrieve data from iHTML servlet for Request2 request

I open bqyfile to use HTML in workspace.
When I export report to excel in IR report.
Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
And I can not open any bqyfiles in workspace.
Anybody gat the same question? Thanks~

Hi,
This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Hope this helps..

Error opening data base for the library for Aperture

Hello,
I have been using Aperture all day and for some reason am now getting this error message when trying to open it again.
Te was an error opening the data base for the library "users/*******/pictures/aperture3triallibrary.aplibrary
Has this happened for anyone else?
Many Thanks

When I hold down ⌘⌥ firmly, at the same time, and with these keys held down double click the Aperture library that I want to repair, I get this panel:
Then, when I select "Repair" Aperture will show a progress bar and the Dock icon will stay highlighted.
When it is finished, the Aperture window will open.
When I select repair, it seems as though it doesn't run. I don't get a dialog box to confirm it's happening and on the dock the little light under the Aperture icon isn't lit, which seems it is'nt open or running.
After you select "Repair", does the panel close and then nothing? Or does the panel not react?
I still don't see fully, what is going on on your mac.
But it is a good sign, that you can create a new library. That suggests, that Aperture is running correctly on your mac, and "only" your old library has a problem. Try to test the new library - import a few images and try to adjust them.
Once you are convinced, that the new library is working well, you have three options.
Try "Rebuild" instead of "Repair".
Or try to import your old library into the new library (Aperture's main menu bar > File >Import > Library) - that is another approach to rebuilsd the library.
Or restore from backup. To restore from Time Machine, open a Finder Window showing your Aperture library, and then enter Time Machine. Go back in time to the most recent date that has a working Aperture library and select "Restore". If you have enough space on your disk, restore to a different folder and don't overwrite your current library.
Regards
Léonie

Can't open aperture 3, warning box comes up," warning there was an error opening the data base for the library /pictures/aperture library .aplibrary Whats up?

I have had Aperture 3 loaded on my computer for a while now. Never had any problems till tonight. Restarted my computer and went to open Aperture and a "warning" box poped up, There was an error opening the data base for the library /picture/aperture library ap library. Then a "quit" button.
What is going on and how can I open my aperture. I have pictures that need worked for clients. Help!

Have you run through the steps in Aperture 3: Troubleshooting Basics. If not that's always a good place to start.
If that doesn;t resolve the problem when you post back describe your hardware and software setup.
good luck

Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary" TIme machine won't load backup "error code -8003"

Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
now Aperture won't open, get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"
TIme machine won't load backup "error code -8003"
Tried reloading Aperture 3.2 but get same result.

You’re running an outdated copy of Safari on your Desktop. That won’t work.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Unable to determine consolidation Area for Databasis AF

Hi All,
I wanted to check BCS results in BW I found the following errors in running query:
1. Error reading the data of InfoProvider BCS_C1V11 (Virtual cube)
2.Unable to determine consolidation Area for Databasis AF
Can anybody advise, what sould be the probable reasons? I regenerated the consolidation areas, still its same error. Any thoughts, what I should look into.
Thanks and Regards,
Ashwin Nagar

Hi Ashwin,
You need to specify BCS mandatory fields when doing a listcube from the virtual cube.
Period
Year
Controlling Area
CS Chart
CS Version
BCS Version (or any other custom versions)
Fiscal Year Variant
Group Currency
If you are trying to get consolidated results, make sure cons group is a field for display from the cube.
Also, if running for a consolidation group, you must enter the cons group you want plus all groups which roll into it.
For example, if you have
CG 1
- CG 2
- - CG 3
- CG4
and you want to get results for CG1, you need to enter CG1, CG2, CG3, CG4.
This is why List of Totals Records is preferred.
Hope that helps
- Chris

TS1717 I get the error "unable to load data class info from sync services" and eventually itunes freezes-will anything in this article help?

I get the error "unable to load data class info from sync services" and eventully itunes freezes. will this article help me?

Hello there brigidfromca.
Messages can always be pretty daunting when we're not sure where to start. I was able to locate the following Knowledge Base article that discusses the very message you're getting:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
It is a pretty thorough document with multiple steps to review, but looks to be great place to start for a resolution for you.
Thanks for using Apple Support Communities to reach out to us for answers.
Cheers,
Pedro D.

Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

Hi Team,
I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
Thanks,
Pronob

Hello,
I have found this support window for you:
http://support.microsoft.com/kb/556031
http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
This may help you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

ERROR: unable to determine license level

I have Tuxedo 7.1 for windows NT version, and put Lic.txt file in
%TUXDIR%\udataobj\
To make sure, I run License utility 7.1 too.
ERROR: unable to determine license level
do you know what's the problem?
thank,
Kyoungseop Ko

Hi, thanks for the reply. I don't use testing. I had upgraded to kernel 2.6.38.3-1. That caused the problem, so I downgraded to the previous version, 2.6.38.2-1, andthings are OK now.
Edit: I did pacman -Syu on both systems and after upgrading pacman I let it upgrade the kernel and it seems OK now. I would like to know what happened if anyone can shed some light.
Last edited by oboedad55 (2011-04-21 02:32:47)

Problem when saving the Data basis for the Consolidation

Hi Gurus,
I am having 2 problems.
1) When i try to execute the UCWB transaction . It gives an information message
" Data basis DB needs to be generated (after upgrade) . I am following the procedure given in that "Run maintenance of data basis DB in display mode. Go to the "Data Streams" tab page. Choose the "Generate" button.
If changes to Customizing settings are permitted in the current system or client, as an alternative you can maintain the data basis in change mode and save. In the case of systems supplied with Customizing transports, as an alternative you can generate the data basis in the source system and then transport it again.
Even after doing that procedure when i again execute the UCWB. it give me the same message.
2) when is try to save data basis for the consolidation . it give me this error message.
"Field 0HC_ATCCODE: This compound differs from that of basic field 0HC_MEDCTG"
I have checked the referenced Info objects . Checked the compound info objects. Activated them again. They dont differ in any way. but still i get this problem.
Please help me out. If someone has come across this error and solved. Please help me.
Regards
satish

Hi satish,
I constantly receive the message like your #2 saying that it was a critical change in X infoobject. It's just a warning and I found several OSS notes saying that this message is not correct. Just ignore it.
In case of your Q #1. The data basis might be generated in two ways: by pressing Save icon and by clicking the Generate icon (the system refers just to this very option) and then - Save. The last way is used in Productive environment. Try it.
Hope this helps.

Error "Unable to load word breaker for locale 0. Error code 8007007e." with search service application.

I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.

Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Excise duty: error 9914 No material data maintained for company code

Dear all,
when executing transaction /BEV2/EDDS I get error 9914 No material data maintained for company code in some material documents.
However, I see material is correct.
Can you tell me which views of material master am I missing?
What do I need to check?
Thanks in advance,
F

Settings in material master "Basic view 1"

[nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.

Hi Experts,
When I use Agent functionality to send email in BIEE 11.1.1.7.0, it will generate the following error message as below: Are you facing the same problem ? Please help me,Thanks very much.
Global Error: [nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.
Error Codes: AXSBMN8D:
The operation completed successfully.

Can you try doing telnet to SMTP server from where BI server is installed and let us know the outcome.Just want to check if any firewall is blocking
telnet hostname portnumber
Thanks,

Error:Unable to determine data basis for virtual InfoCube.

Similar Messages

Maybe you are looking for