Error: "Unable to find a working IR device" in Windows Vista 64-bit, Audigy 4

I have Audigy 4 Pro with the RM-500 remote that came with it.
The remote is not working in Vista 64-bit (Enterprise).
It is definitely not a hardware problem because everything works in Windows XP Professional SP3. When I dual boot into Vista, the remote doesn't control anything in Windows but the red light on the I/O external box is blinking so it's definitely receiving input.
When I run "Entertainment Center Settings", I get the error "Unable to find a working IR device" and all the options are greyed out.
<img title="err" width="300" style="width: 300px; height: 69px" src="http://img379.imageshack.us/img379/238/2278203yd.jpg" height="69" alt="err">
<img width="459" title="err2" style="width: 459px; height: 393px" src="http://img379.imageshack.us/img379/388/2850392ep2.jpg" height="393" alt="err2">
Has anyone gotten the remote working in Windows Vista 64-bit's? Thank you for your help.
Regards,
Lawrence

_ I am having this exact same issue on vista business 32 bit. Everything else on the external box works perfectly fine, except the remote. The remote does work however with intelliremote, but I cannot justify paying the money for such simple functionality. Any fix on [email protected]

Similar Messages

"Unable to find a working IR device" Error (Audigy

I just bought the Audigy 4 sound card today, and did a Full Installation. Unfortunatley, the remote does not work. When Windows XP loads, Windows says it has found New Hardware and identifies it as "Creative USB IR Recei'ver", but it can't locate the files to install it. When I press a button on the remote, the red light in the receiver lights up, but nothing happens. Also, when I try to launch Creative Entertainment Centre Settings, I get the following error: "Unable to find a working IR device". I tried uninstalling everything and then installing it again. This didn't fix anything. I also downloaded the latest drivers and tried another USB port. Needless to say, neither fixed the problem. I really want to get this remote working. Can someone please help me out? Thanks in advance.Message Edited by Marce22 on 2-02-20060:0 PM

_ I am having this exact same issue on vista business 32 bit. Everything else on the external box works perfectly fine, except the remote. The remote does work however with intelliremote, but I cannot justify paying the money for such simple functionality. Any fix on [email protected]

Unable to find a working IR device - hu

I have a brand new Audigy 4 Pro installed.
The remote used to work. Now it doesn't operate anything - it only flashes the red LED on the hub.
I have the latest file updates installed.
What is wrong?
Neil

I found the answer (just as well as its all quiet on the suggestion front).
I use my old 5. digital card for my gameport. XP installed the drivers for it too. I disabled the 5. drivers, rebooted, and everything works great.
Problem solved.
Neil

Unable to find a working IR devi

Hey. Just picked up my X-Fi Fatalty today and I must say I'm quite impressed. Mostly. For some reason, the front panel doesn't seem to want to work. It's powered and plugged in, but there's no light coming from the optical ports and when I launch the entertainment center I get the lovely message "Unable to find a working IR device."
Any ideas?

Bratboy pretty much covered it. As long as there is power to the dri've and the PC is turned on, there should be a light from the optical output. Double check the connections. If you have a floppy dri've, and you know that's working (so the power much be too), run it's cable to the dri've instead, in case the current cable isn't working. Run over all the cables to make sure they're plugged in properly, as bratboy mentioned some cables can be a bit tighter and need to be pushed in firmly or "wiggled" into place.
If that still doesn't work, then it's possible there is a problem with the dri've.
Cat

How to get Adobe Flash 10 to work on IE8 on Windows Vista?

I've tried downloading the newest Adobe Flash Player 10 on IE8
on my Windows Vista and it's not working. It downloads but when I go back to hulu.com it says I still have to download the latest version. I've tried unistalling and installing it (several times)... I've made sure that Shockwave is enabled under Internet settings... I've also tried unistalling IE8 and reinstalling without the updates... and still nothing. I even tried installing Flash 10 on IE7, still nothing worked.
I have Windows Vista 32 bit and not terribly computer savvy. Hulu works fine when I use Firefox, but it's not working on IE8. I need it to work on IE8 in order to stream video from hulu on our Wii through PlayOn TV. Any help with this would be much appreciated. Thanks!

using ie, navigate to
http://www.adobe.com/software/flash/about/
does it show you have fp installed?

[SOLVED] - Arch Boot Error: Unable to find Root Device /dev/sdb1

I had Arch running perfectly using /dev/sdb1 (versus Disk Label or UUID) and decided to do a update. After the Update I can't boot
to a running system, and I get this error message:
ERROR: Unable to find root device /dev/sdb1
You are being dropped into a recovery shell.
Is there an easy way to convert to UUID or Disk Label since the latest Upgrade doesn't allow me to continue to use /dev/sdb1 ??
I'd prefer not to have to rebuild both USB Flash Drives to get functional systems.
Any Help is greatly appreciated.
Suggestions?
Larry
Last edited by lkraemer (2012-02-21 15:14:02)

Check your grub and read https://wiki.archlinux.org/index.php/UUID#By-uuid
Edit:
https://bbs.archlinux.org/viewtopic.php … 0#p1059160
https://bbs.archlinux.org/viewtopic.php?pid=1059338
https://bbs.archlinux.org/viewtopic.php?id=135288
Last edited by karol (2012-02-21 01:07:21)

[SOLVED] ERROR: Unable to find root device '/dev/sda3'

Earlier I updated the kernel to my arch system and found this error while trying to boot. I hate to post this because there are so many topics like it, but I've been looking for hours for a solution to this problem and can't find one.
Here is the output:
Booting 'Arch Linux'
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernet /vmlinuz-linux root=/dev/sda3 ro
[Linux-bzImage, setup=0x4200, size=0x2ff2d0]
initrd /initrd @ 0xfd17000, 0x2c878c bytes]
Probing EDD (edd=off to disable)... ok
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
:: Starting udevd...
done.
Waiting 10 seconds for device /dev/sda3 ...
ERROR: device '/dev/sda3' not found. skipping fsck.
ERROR: Unable to find root device '/dev/sda3'.
You are being dropped to a recovery shell
type 'exit' to try and continue booting
sh: can't access tty; job control turned off
My partition layout is like this:
swap: /dev/sda1
boot: /dev/sda2
root: /dev/sda3
extended: /dev/sda4
home: /dev/sda5
I have two hard drives, but i'm sure /dev/sda is the one with my OS.
Here are some things I've tried:
This was at the very bottom of the pacman wiki
# mkdir /mnt/arch
# mount /dev/sdaX /mnt/arch (your root partition)
# cd /mnt/arch
# mount -t proc proc proc/
# mount -t sysfs sys sys/
# mount -o bind /dev dev/
# mount /dev/sdaX boot/ (your /boot partition) #This step is not needed if you do not have a separate boot partition
# chroot .
# pacman -Syu udev mkinitcpio
# mkinitcpio -p linux
I've also tried performing the above, downgrading the kernel, updating my mirrorlist, reinstalling the kernel, and rebooting as mentioned here.
I've alsa tried a few other things that I've read, but can no longer remember.
Any help would be greatly appreciated! Thanks.
Last edited by colton7909 (2012-05-25 02:09:36)

Thank colton
Same problem here, but on a mac book (not mine eyh )
So, for those how have the problem (or need a live usb for mac or uefi systems),
1) with a 32bits system
- download gparted live cd
- use it for the step 3
2) with a 64bits system:
- you need the gparted live cd too: mount it and copy the EFI directory somewhere; then umount it;
- download a 64bits system (system rescue cd, as colton said is enough, follow the instructions for installation on their website first);
- mount you live usb, install the 64bits system;
- copy EFI system on the key
- edit the grub.cfg in EFI/boot/ , add the following before the other entries:
menuentry "System Rescue" {
set gfxpayload=keep
linux /syslinux/altker64 nomodeset efi
initrd /syslinux/initram.igz
3) repairing...
- boot the broken computer with the live usb
- mount the partition on which your system is (e.g. /dev/sda1 on /mnt)
- chroot it, init the system as needed (mount /dev, /proc, etc. the easier way is using init scripts)
% chroot /mnt /bin/bash
% /etc/rc.sysinit
% mkinitcpio -p linux

Export Release Build error - Exception in thread "main" java.lang.Error: Unable to find named traits

I've been developing an AIR application for Android and iOS. During development, I've run the application (in debug mode) in the desktop simulator as well as on an iPhone 4 and a Nook Tablet.
However, I recently tried to "Export Release Build" for iOS and hit the following error: (I've stripped out the package and class information in the error message below)
!ENTRY com.adobe.flexbuilder.project 4 43 2012-04-06 13:09:15.516
!MESSAGE Error occurred while packaging the application:
Exception in thread "main" java.lang.Error: Unable to find named traits: valid.package.path.here::ValidClassName
          at adobe.abc.Domain.resolveTypeName(Domain.java:231)
          at adobe.abc.Domain.resolveTypeName(Domain.java:148)
          at adobe.abc.GlobalOptimizer.sccp_eval(GlobalOptimizer.java:6665)
          at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:5909)
          at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4628)
          at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3514)
          at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2215)
          at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:526)
          at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:336)
          at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
          at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
Compilation failed while executing : ADT
!STACK 0
java.lang.Exception
          at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
          at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
          at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
          at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doPackage (ExportReleaseVersionWizard.java:283)
          at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:152)
          at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
          at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
          at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
          at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
          at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
          at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
          at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
          at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
          at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
          at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
          at org.eclipse.jface.window.Window.open(Window.java:801)
          at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
          at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
          at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
          at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
          at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
          at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
          at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
          at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
          at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
          at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
          at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
          at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
          at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
          at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
          at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
          at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
          at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
          at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
          at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
          at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
          at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
          at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
          at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
The class the error message is referring to is defined with a SWC that my project links to. However, I've even tried to define a class with that same name (and location) within my project and it still fails to find it.
Why am I able to Project->Clean and run this project within the desktop AIR player (or on the device in debug mode) but unable to export it as a release build?
I have found a couple of threads mentioning a similar error but none of them have been marked as resolved.

At this point I feel I am talking to myself, but I will share my work-around in case it helps another who may stumble across this post.
In my particular case, both my main AIR application and my ANE wrapper library were referencing the same external Flex library (same revision). Both projects had the library linkage set to merge. Changing the linkage to "External" on one of the 2 libraries (it doesn't seem to matter which) and leaving the other as "Merged into code" enabled the export to complete without the bizarre "Unable to find named traits" error.

Nokia 822 ERROR: Unable to find bootable option.

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down."
This occurred earlier today immediately upon installing a Verizon update. The phone worked perfectly before the update.
What is going on? I certainly am not going to accept responsibility for this failure, or replacing this phone.
Before you ask, the phone is in perfect condition otherwise. Never dropped. Never seen even a drop of water (or any other liquid).
One thing peculiar I did notice was that the update took over an hour to download, which seems like quite a long time considering data transfer rates.
So, what can be done?
To recap:
1) My phone worked perfectly. It was in perfect condition.
2) An update was installed (which Verizon recommended (and I'd go as far as to say forced))
3) Now the phone is completely inoperable, only giving the error message listed above.
Help please?

Hi Joel, the sim card has been removed and reinstalled multiple times with no effect. And yes, only the the original Verizon software was on the device. To be clear, the phone was attempting to install a Verizon-forced update when it died. I would rather have not had the update because the phone was working perfectly, but Verizon does not give the option to decline updates, only delay them. It should be noted that with the help of Verizon associate (Lovesa) the Nokia Software Recovery Tool was attempted, but even that did nothing.
I have now done at least 8 hours of research on this and it is obvious this is a widespread and known issue with the 822. There appears to be absolutely nothing that can be done to revive the phone at this point. After viewing literally hundreds of posts on the "unable to find bootable option" error no one has found a fix. This issue is well documented.
Why Verizon would force an update that ruins users phones is beyond me. And to take no responsibility is, in my view (and most likely the law's view), criminal. To be completely honest and forthright, I am so upset about this situation Verizon is now losing a 15 year loyal customer.

Nokia 822 ERROR: Unable to find boot option

My 822 says "Error: Unable to find bootable option. Press any key to shut down"
This happened last night after installing a Verizon update. The phone worked prior to the update. The phone quit working solely because of the update from Verizon. What can be done to fix the phone?

bjurstrs,
I am so sorry to hear that your device is no longer working after the update. Thanks for trying a factory reset. We should look into replacement options. Please private message us so we can review your account.
LindseyT_VZW
Follow us on Twitter @VZWSupport.

Error: Unable to find channel ID

Hello,
I have an scenario R/3 - XI - Mail in GEN, the same scenario was working perfectly in GED but after transporting it to GEN it does not work.
In the adapter monitoring I can see the following error: 'Unable to find channel ID'. Does anybody know the reason of this error?
Thanks in advanced,
Luis.

hi,
- check if all directory objects are tranported to new landscape!
- activate communication channel once more
- refresh CPA cache
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Nokia Lumia 620 "Error: Unable to find bootable op...

Hello
I'm in need of some help with my Nokia Lumia 620. It is 21 months old. It was running on Lumia Denim (WindowsPhone8 (8.10.14219) according to the Hardware/Software Info on my account on windowsphone.com)
Today the screen suddenly went black when I tried to open the email app and started to display the message "Error: Unable to find bootable option. Press any key to shutdown"
I have tried removing the battery and replacing it after ten mins. I still get the error.
I have tried removing the battery and sim card and replacing the battery after ten mins. Still no joy.
I have tried to perform a HARD reset. This doesn't work as as soon as the power button vibrates and I press the volume down button the phone shuts down, the exclamation mark never appears.
Please could you point me in the right direction for solving this and getting my phone up and running

Hi, deffers90. Welcome to Microsoft Mobile Community. Since all the possible troubleshooting steps didn't help, consider sending the phone to our Care Points for assessment as suggested by @93tid. Everything will be deleted once the phone undergoes repair. To look for the nearest Care Points within your area, see: Local support. Keep us posted.

Backint failed "ERROR: unable to find file "

Hello
I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
I got errror:
BR0231E Backup utility call failed
ERROR: unable to find file /oracle/BWP/sapdata4
Can u help me
Regards
Fethi

This is the backup logfile:
BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
BR0101I Parameters
Name                           Value
oracle_sid                     BWP
oracle_home                    /oracle/BWP/102_64
oracle_profile                 /oracle/BWP/102_64/dbs/initBWP.ora
sapdata_home                   /oracle/BWP
sap_profile                    /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
backup_mode                    ALL
backup_type                    offline
backup_dev_type                util_file
util_par_file                  /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
system_info                    orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
oracle_info                    BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
sap_info                       700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
make_info                      linuxx86_64 OCI_102 Feb 8 2008
command_line                   brbackup -c force -p initBWP_sapdata_offline.sap
BR0116I ARCHIVE LOG LIST before backup for database instance BWP
Parameter                      Value
Database log mode              No Archive Mode
Automatic archival             Disabled
Archive destination            /oracle/BWP/oraarch/BWParch
Archive format                 %t_%s_%r.dbf
Oldest online log sequence     27
Next log sequence to archive   30
Current log sequence           30               SCN: 88160883
Database block size            8192             Thread: 1
Current system change number   88168768         ResetId: 655409152
BR0118I Tablespaces and data files
Tablespace     TS-Status F-Status File                                                       Size   Id.     Device Link    Type       MaxSize     IncrSize BlkSize
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data1                      17498636288    4       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data2                      16450060288    5       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data3                      15820914688    6       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWM700.data1                   15128862720   11       64784 NOLINK FILE   34359721984    104857600     8192
PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM700.data2                    4132511744   12       64785 NOLINK FILE   34359721984         8192     8192
PSAPBWPDIM     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMdim.data1                    4202700800    7       64770 NOLINK FILE   10485760000     20971520     8192
PSAPBWPFACT    ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMfact.data1                   6719283200    8       64770 NOLINK FILE   34359721984     20971520     8192
PSAPBWPODS     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWMods.data1                   19868426240    9       64784 NOLINK FILE   34359721984     20971520     8192
PSAPBWPUSR     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMusr.data1                     239083520   10       64770 NOLINK FILE   10485760000     20971520     8192
PSAPSR3USR     ONLINE+    ONLINE+   /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1            134225920   20       64785 NOLINK FILE   10485760000     20971520     8192
PSAPTEMP       ONLINE#    ONLINE+   /oracle/BWP/sapdata1/temp_1/temp.data1              10485768192   -1       64770 NOLINK FILE   34358689792     20971520     8192
PSAPUNDO       ONLINE-    ONLINE+   /oracle/BWP/sapdata1/undo_1/undo.data1               1073750016    2       64770 NOLINK FILE   34359721984     20971520     8192
SYSAUX         ONLINE*    ONLINE+   /oracle/BWP/sapdata1/sysaux_1/sysaux.data1            671096832    3       64770 NOLINK FILE   10485760000     20971520     8192
SYSTEM         ONLINE*    SYSTEM+   /oracle/BWP/sapdata1/system_1/system.data1            838868992    1       64770 NOLINK FILE   10485760000     20971520     8192
BR0119I Redo log files
File                                                Size Group     Device Status    Link    Type
/oracle/BWP/origlogA/log_g11m1.dbf              52429312    1        64774 INUSE     NOLINK FILE
/oracle/BWP/mirrlogA/log_g11m2.dbf              52429312    1        64776 INUSE     NOLINK FILE
/oracle/BWP/origlogB/log_g12m1.dbf              52429312    2        64775 INUSE     NOLINK FILE
/oracle/BWP/mirrlogB/log_g12m2.dbf              52429312    2        64777 INUSE     NOLINK FILE
/oracle/BWP/origlogA/log_g13m1.dbf              52429312    3        64774 INUSE     NOLINK FILE
/oracle/BWP/mirrlogA/log_g13m2.dbf              52429312    3        64776 INUSE     NOLINK FILE
/oracle/BWP/origlogB/log_g14m1.dbf              52429312    4        64775 INUSE     NOLINK FILE
/oracle/BWP/mirrlogB/log_g14m2.dbf              52429312    4        64777 INUSE     NOLINK FILE
BR0120I Control files
File                                                Size   Id.      Device Link    Type
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf         34979840    0        64774 NOLINK FILE
/oracle/BWP/origlogB/cntrl/cntrlBWP.dbf         34979840    0        64775 NOLINK FILE
/oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf         34979840    0        64770 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
PSAPBWPUSR
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0057I Backup of database: BWP
BR0058I BRBACKUP action ID: bdxzgdlt
BR0059I BRBACKUP function ID: aff
BR0110I Backup mode: ALL
BR0077I Database files for backup:
/oracle/BWP/origlogA/log_g11m1.dbf
/oracle/BWP/origlogB/log_g12m1.dbf
/oracle/BWP/origlogA/log_g13m1.dbf
/oracle/BWP/origlogB/log_g14m1.dbf
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
BR0061I 19 files found for backup, total size 108250.510 MB
BR0143I Backup type: offline
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0307I Shutting down database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0308I Shutdown of database instance BWP successful
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
WARNING: unknown parameter: print_log_flag 1
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for restore
Program:                /usr/sap/BWP/SYS/exe/run/backint 5.1
Input File:             /oracle/BWP/sapbackup/.bdxzgdlt.lst
Profile:                /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
Function:               BACKUP
Backup Type:            BACKUP_FILE
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
BR0232E 0 of 19 files saved by backup utility
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
BR0304I Starting and opening database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
BR0305I Start and open of database instance BWP successful
BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
Thank you
Regards

AutoPatch error: Unable to find job when restart

OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725...
Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist
In the NLS patch update with 4 merged patches,
while 16 workers are running to create rdf files as below, it made my Putty (v0.60) crashed. Below example is succeeded case taken from the log of one worker to let you know which task was on-going...
Source: /d01/oracle/SID/apps/apps_st/appl/pa/12.0.0/reports/SF/PAXPCTCE.rdf
Successfully generated report "PAXPCTCE.rdf".
Generated 1 files successfully.
Generated 0 files with non-fatal warnings.
Generated 0 files with fatal errors.
adrepgen is exiting with status 0
End of adrepgen session
Date/time is Wed Sep 07 2011 15:22:44
Eventually, I had to run adctrl for changing job status <Failed>, and re-run adpatch. Then it ran several assigned jobs completed successfully.
Then again, it made my Putty crash, and repeated few times like that.
When there are 69 jobs remaining, autopatch error occurred.
There are now 69 jobs remaining (current phase=A1001):
0 running, 69 ready to run and 0 waiting.
Reading completed jobs from restart file (if any).
AutoPatch error:
Unable to find job when restarting.
When adctrl was checked to see worker status [1],
Enter your choice [1] : 1
Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved?
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?
Thanks as always for the help.
- SH

Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved? If the table does not exist, then you cannot fix it.
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?Correct -- This is the only option you have.
Thanks,
Hussein

Graphics Error: Unable to find suitable font!

I am trying to use the program rasmol (that displays molecules), and I get the error:
Graphics Error: Unable to find suitable font!
I installed rasmol by
pacman -Sy rasmol
today for version 2.7.3-2
also did I do a system upgrade today:
pacman -Suy
the section "Files" in /etc/X11/xorg.conf contains:
ModulePath "/usr/lib/xorg/modules"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/util"
I have added all directories in /usr/share/fonts to be sure and restarted X.
I tried installing all font packages that I could find, but the error is still the same:
#pacman -Q | grep font
font-bh-ttf 1.0.0-2
fontcacheproto 0.1.2-1
fontconfig 2.3.2-6
fontsproto 2.0.2-1
gsfonts 8.11-3
libfontenc 1.0.2-1
libxfont 1.1.0-1
libxfontcache 1.0.2-1
ttf-ms-fonts 1.3-8
xorg-font-utils 1.0.1-1
xorg-fonts-alias 1.0.1-1
xorg-fonts-encodings 1.0.0-1
xorg-fonts-misc 1.0.0-2
#pacman -Q | grep ttf
font-bh-ttf 1.0.0-2
sdl_ttf 2.0.8-1
ttf-bitstream-vera 1.10-4
ttf-cheapskate 2.0-4
ttf-isabella 1.003-2
ttf-junicode 0.6.5pre20051126-2
ttf-ms-fonts 1.3-8
I removed the fonts.dir and fonts.scale in /usr/share/fonts and /usr/share/fonts/TTF and did mkfontscale and mkfontdir
to replace them.
restarting X and retrying to run rasmol still gives the same error.
I have tried to search google for the error message but all I could find was the source code that probably produced the message:
http://www.bernstein-plus-sons.com/soft … c/x11win.c
and some redhat binary file that gives some fonts seemingly along with the error message:
http://www.bernstein-plus-sons.com/cgi- … smol_16BIT
...Options^@Colours^@Display^@File^@Graphics Error: %s!^@-*-*-bold-o-normal-*-14-*^@-*-serf-bold-o-normal-*-14-*^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@-*-helvetica-bold-o-normal-*-14-*^@Unable to find suitable font^@%x %s^@Comm....
which might be an indication for which fonts I need.
Could anyone please give me some assistance to get the program working,
perhaps by giving advise on how to install the abovementioned fonts
or anything else that I have failed to do.
I would really appreciate it , thanx

Hey,
i too get the same error that no suitable fonts could be found. I installed all the fonts mentioned in this thread. My Section "Files" looks like this:
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/speedo"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/util
EndSection
Still the error occurs. Does somebody know how to fix this?
greetings koelle

Error: "Unable to find a working IR device" in Windows Vista 64-bit, Audigy 4

Similar Messages

Maybe you are looking for