ERROR "Unable to find an entry point named OCIEnvCreate in DLL"

Hi, IÂ´am developing an ASP.net app, I have worked with asp.net and oracle before, but in this time im getting this error: "Unable to find an entry point named OCIEnvCreate in DLL" the oracle91 folder has read priveleges, I have installed ODP.net, and I keep getting this error, what can I do. Im using framework 1.1. thxs

The "Authenticated Users" group should have "Read & Execute" on the %ORACLE_HOME% folder and below. Can you verify if this is the case?
- Mark
===================================================
Mark A. Williams
Oracle DBA
Author, Professional .NET Oracle Programming
http://www.apress.com/book/bookDisplay.html?bID=378

Similar Messages

Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dl

.NET 2 (c#) Standalone application is failed to run on clean computer with subj
application compiled on VisualStudio 2005
installed Software:
.NET 2 redistribution
ODAC10202Beta.exe
The same application built with VS 2003 .NET 1 and installed ODAC101040.exe
works fine.
Thanks for any advice.

I tried the suggestion above using the MS GAC tool and I still have the problem so I am looking for any other suggestions or thoughts as to what could be wrong:
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.9.2.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.1.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.2.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\1.x\Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\2.x\Oracle.DataAccess.dll"
I used gacutil.exe out of "C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin" and each insert said it was successful.
The specific error I am getting in VS2008 with SP1 is: _getContextXml:Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dll' in a .NET 2.x project.
I used dependency walker and looked at both OraOps10.dll (version 1.102.2.20) and OraOps10w.dll (version 2.102.2.20) and the function OpsPrmAllocValCtx isn't in either one of them. I looked at other users machines who aren't having this problem and they have the same Oracle DLLs from the same install that I do too so I am scratching my head trying to figure out what is wrong here and would appreciate any help - and thanks in advance.

Unable to find an entry point named 'imaqCreateImage' in DLL ...

Firstly some background:
Using Microsoft's managed extensibility framework (MEF), I've created a "Test Tool" framework which accepts plugins. The plugins are generally HW drivers with UIs. I created a NI Vision plugin which does camera discovery, acquisition and image processing. All functionality is exposed via a UI and public methods. The "Test Tool" framework shows the plugin UIs in docking panels (same VS docking panels) and provides a scripting interface for the plugin's public methods.
Ok, now the problem:
At runtime for the "Test Tool" framework and plugin I get "Unable to find an entry point named 'imaqCreateImage' in DLL ...". After a quick debug: the exception is thrown when instantiating the Imageviewer control in NI Vision plugin UI.
I created a plugin test environment which simply references the plugin and adds the plugin's UI to a form. This works correctly at runtime.
In addition, if I remove the Imageviewer controls from the plugin, it works correctly at runtime in the "Test Tool" framework.

Have you tried ensuring that the DLL function is actually being exported? You might check out some other forums as this problem has more to do with calling our DLL than the DLL its self. I've found a few other instances of this issue on external forums but I couldn't find any internal resources as you're doing something outside the scope of the intended functionality.
http://stackoverflow.com/questions/653178/unable-to-find-an-entry-point-named-function-in-dll-c-to-c...
http://stackoverflow.com/questions/13882304/unable-to-find-an-entry-point-named
Rob B
FlexRIO Product Manager

Export Release Build error - Exception in thread "main" java.lang.Error: Unable to find named traits

I've been developing an AIR application for Android and iOS. During development, I've run the application (in debug mode) in the desktop simulator as well as on an iPhone 4 and a Nook Tablet.
However, I recently tried to "Export Release Build" for iOS and hit the following error: (I've stripped out the package and class information in the error message below)
!ENTRY com.adobe.flexbuilder.project 4 43 2012-04-06 13:09:15.516
!MESSAGE Error occurred while packaging the application:
Exception in thread "main" java.lang.Error: Unable to find named traits: valid.package.path.here::ValidClassName
          at adobe.abc.Domain.resolveTypeName(Domain.java:231)
          at adobe.abc.Domain.resolveTypeName(Domain.java:148)
          at adobe.abc.GlobalOptimizer.sccp_eval(GlobalOptimizer.java:6665)
          at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:5909)
          at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4628)
          at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3514)
          at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2215)
          at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:526)
          at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:336)
          at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
          at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
Compilation failed while executing : ADT
!STACK 0
java.lang.Exception
          at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
          at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
          at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
          at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doPackage (ExportReleaseVersionWizard.java:283)
          at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:152)
          at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
          at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
          at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
          at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
          at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
          at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
          at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
          at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
          at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
          at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
          at org.eclipse.jface.window.Window.open(Window.java:801)
          at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
          at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
          at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
          at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
          at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
          at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
          at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
          at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
          at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
          at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
          at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
          at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
          at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
          at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
          at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
          at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
          at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
          at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
          at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
          at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
          at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
          at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
          at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
The class the error message is referring to is defined with a SWC that my project links to. However, I've even tried to define a class with that same name (and location) within my project and it still fails to find it.
Why am I able to Project->Clean and run this project within the desktop AIR player (or on the device in debug mode) but unable to export it as a release build?
I have found a couple of threads mentioning a similar error but none of them have been marked as resolved.

At this point I feel I am talking to myself, but I will share my work-around in case it helps another who may stumble across this post.
In my particular case, both my main AIR application and my ANE wrapper library were referencing the same external Flex library (same revision). Both projects had the library linkage set to merge. Changing the linkage to "External" on one of the 2 libraries (it doesn't seem to matter which) and leaving the other as "Merged into code" enabled the export to complete without the bizarre "Unable to find named traits" error.

I just update itunes for latest version. Now I can't open it on win 7- 64 bits. I get an erro: Cant find the entry point of the procudere sqlite_wal_checkpoint.. Windows error 127.. help!!!

I just update itunes for latest version. Now I can't open it on windows 7- 64 bits. I get an erro: Cant find the entry point of the procudere sqlite_wal_checkpoint.. Windows error 127. What can I do...???

How did you fix this?

Exception in thread "main" java.lang.Error: Unable to find named traits: org.puremvc.as3.multicore.p

Hi all,
i try to use pfi with a project that i did with air in flash builder.
I make my swf with ant task
    <target name="releasecompile" depends="init">
    <echo>
              Ant Task :: releaseCompile
    </echo>
        <java jar="${MXMLC.JAR}" fork="true" failonerror="true">
           <arg value="-debug=false"/>
            <arg value="+flexlib=${SDK_HOME}frameworks"/>
            <arg value="+configname=air"/>
            <arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
            <arg value="-output=${build}/${APP_ROOT_FILE}"/>
        <arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
        </java>
    </target>
i have a swf in result and i play pfi like this
./pfi -package -target ipa-ad-hoc -provisioning-profile /Users/stef/Desktop/PROJECT/PROJECT_Config-2.mobileprovision -storetype pkcs12 -keystore /Users/stef/Desktop/PROJECT/Certificats2.p12 -storepass mypass /Users/stef/Desktop/PROJECT/PROJECTConfig.ipa /Users/stef/Documents/Adobe\ Flash\ Builder\ 4/PROJECT/src/PROJECTConfigurateur-app.xml -C /Users/stef/Desktop/PROJECT/ PROJECTConfigurateur.swf Default.png icons/Icon57.png icons/Icon29.png icons/Icon512.png
Exception in thread "main" java.lang.Error: Unable to find named traits: org.puremvc.as3.multicore.patterns.facade::Facade
at adobe.abc.Domain.resolveTypeName(Domain.java:195)
at adobe.abc.Domain.resolveTypeName(Domain.java:112)
at adobe.abc.GlobalOptimizer$InputAbc.resolveTypeName(GlobalOptimizer.java:274)
at adobe.abc.GlobalOptimizer$InputAbc.readInstance(GlobalOptimizer.java:837)
at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:388)
at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:280)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:160)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcode(AOTCompiler.java:329)
at com.adobe.air.ipa.AOTCompiler.GenerateMacBinary(AOTCompiler.java:600)
at com.adobe.air.ipa.IPAOutputStream.compileRootSwf(IPAOutputStream.java:196)
at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:366)
at com.adobe.air.ADTPackager.createPackage(ADTPackager.java:65)
at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:165)
at com.adobe.air.ADTEntrypoint.parseArgsAndGo(ADTEntrypoint.java:132)
at com.adobe.air.ipa.PFI.parseArgsAndGo(PFI.java:152)
at com.adobe.air.ADTEntrypoint.run(ADTEntrypoint.java:68)
at com.adobe.air.ipa.PFI.main(PFI.java:112)
do you have some ideas about this ?
Regards
Stef

Ok,
    <target name="releasecompile" depends="init">
    <echo>
              Ant Task :: releaseCompile
    </echo>
        <java jar="${MXMLC.JAR}" fork="true" failonerror="true">
           <arg value="-debug=false"/>
            <arg value="+flexlib=${SDK_HOME}frameworks"/>
            <arg value="+configname=air"/>
            <arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
            <arg value="-output=${build}/${APP_ROOT_FILE}"/>
        <arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
        </java>
    </target>
I mistake this line
<arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
must be
<arg value="-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
for include the content in the swf.
Regards
Stef

When I turn on my computer,an error message says "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Digital Signature- SSF error: Unable to find external security product

Dear Friends,
After I enter my User ID and Password, this displays this error !!!
SSF error: Unable to find external security product
Would really appreciate your help.
Thanks,
Sri

Hi Sri,
Would you pls check the installation of the security toolkit on your application server?
Which security product do you use?
The standard security product is SAPSECULIB (library sapsecu.dll).
Please check the SSF initialization messages which are contained in each dev_w## developer trace (transaction ST11). When successful, the initializaion messages look like this:
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/<SID>/SYS/exe/run/sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
General information for SAPSECULIB can be found in SAP note 354819.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Nokia Lumia 620 "Error: Unable to find bootable op...

Hello
I'm in need of some help with my Nokia Lumia 620. It is 21 months old. It was running on Lumia Denim (WindowsPhone8 (8.10.14219) according to the Hardware/Software Info on my account on windowsphone.com)
Today the screen suddenly went black when I tried to open the email app and started to display the message "Error: Unable to find bootable option. Press any key to shutdown"
I have tried removing the battery and replacing it after ten mins. I still get the error.
I have tried removing the battery and sim card and replacing the battery after ten mins. Still no joy.
I have tried to perform a HARD reset. This doesn't work as as soon as the power button vibrates and I press the volume down button the phone shuts down, the exclamation mark never appears.
Please could you point me in the right direction for solving this and getting my phone up and running

Hi, deffers90. Welcome to Microsoft Mobile Community. Since all the possible troubleshooting steps didn't help, consider sending the phone to our Care Points for assessment as suggested by @93tid. Everything will be deleted once the phone undergoes repair. To look for the nearest Care Points within your area, see: Local support. Keep us posted.

Nokia 822 ERROR: Unable to find bootable option.

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down."
This occurred earlier today immediately upon installing a Verizon update. The phone worked perfectly before the update.
What is going on? I certainly am not going to accept responsibility for this failure, or replacing this phone.
Before you ask, the phone is in perfect condition otherwise. Never dropped. Never seen even a drop of water (or any other liquid).
One thing peculiar I did notice was that the update took over an hour to download, which seems like quite a long time considering data transfer rates.
So, what can be done?
To recap:
1) My phone worked perfectly. It was in perfect condition.
2) An update was installed (which Verizon recommended (and I'd go as far as to say forced))
3) Now the phone is completely inoperable, only giving the error message listed above.
Help please?

Hi Joel, the sim card has been removed and reinstalled multiple times with no effect. And yes, only the the original Verizon software was on the device. To be clear, the phone was attempting to install a Verizon-forced update when it died. I would rather have not had the update because the phone was working perfectly, but Verizon does not give the option to decline updates, only delay them. It should be noted that with the help of Verizon associate (Lovesa) the Nokia Software Recovery Tool was attempted, but even that did nothing.
I have now done at least 8 hours of research on this and it is obvious this is a widespread and known issue with the 822. There appears to be absolutely nothing that can be done to revive the phone at this point. After viewing literally hundreds of posts on the "unable to find bootable option" error no one has found a fix. This issue is well documented.
Why Verizon would force an update that ruins users phones is beyond me. And to take no responsibility is, in my view (and most likely the law's view), criminal. To be completely honest and forthright, I am so upset about this situation Verizon is now losing a 15 year loyal customer.

[SOLVED] ERROR: Unable to find root device '/dev/sda3'

Earlier I updated the kernel to my arch system and found this error while trying to boot. I hate to post this because there are so many topics like it, but I've been looking for hours for a solution to this problem and can't find one.
Here is the output:
Booting 'Arch Linux'
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernet /vmlinuz-linux root=/dev/sda3 ro
[Linux-bzImage, setup=0x4200, size=0x2ff2d0]
initrd /initrd @ 0xfd17000, 0x2c878c bytes]
Probing EDD (edd=off to disable)... ok
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
:: Starting udevd...
done.
Waiting 10 seconds for device /dev/sda3 ...
ERROR: device '/dev/sda3' not found. skipping fsck.
ERROR: Unable to find root device '/dev/sda3'.
You are being dropped to a recovery shell
type 'exit' to try and continue booting
sh: can't access tty; job control turned off
My partition layout is like this:
swap: /dev/sda1
boot: /dev/sda2
root: /dev/sda3
extended: /dev/sda4
home: /dev/sda5
I have two hard drives, but i'm sure /dev/sda is the one with my OS.
Here are some things I've tried:
This was at the very bottom of the pacman wiki
# mkdir /mnt/arch
# mount /dev/sdaX /mnt/arch (your root partition)
# cd /mnt/arch
# mount -t proc proc proc/
# mount -t sysfs sys sys/
# mount -o bind /dev dev/
# mount /dev/sdaX boot/ (your /boot partition) #This step is not needed if you do not have a separate boot partition
# chroot .
# pacman -Syu udev mkinitcpio
# mkinitcpio -p linux
I've also tried performing the above, downgrading the kernel, updating my mirrorlist, reinstalling the kernel, and rebooting as mentioned here.
I've alsa tried a few other things that I've read, but can no longer remember.
Any help would be greatly appreciated! Thanks.
Last edited by colton7909 (2012-05-25 02:09:36)

Thank colton
Same problem here, but on a mac book (not mine eyh )
So, for those how have the problem (or need a live usb for mac or uefi systems),
1) with a 32bits system
- download gparted live cd
- use it for the step 3
2) with a 64bits system:
- you need the gparted live cd too: mount it and copy the EFI directory somewhere; then umount it;
- download a 64bits system (system rescue cd, as colton said is enough, follow the instructions for installation on their website first);
- mount you live usb, install the 64bits system;
- copy EFI system on the key
- edit the grub.cfg in EFI/boot/ , add the following before the other entries:
menuentry "System Rescue" {
set gfxpayload=keep
linux /syslinux/altker64 nomodeset efi
initrd /syslinux/initram.igz
3) repairing...
- boot the broken computer with the live usb
- mount the partition on which your system is (e.g. /dev/sda1 on /mnt)
- chroot it, init the system as needed (mount /dev, /proc, etc. the easier way is using init scripts)
% chroot /mnt /bin/bash
% /etc/rc.sysinit
% mkinitcpio -p linux

Error: Unable to find all subVIs from saved VIs.

TestStand 2010 SP1, LabVIEW 2011, WinXP
Trying to build a deployment in TestStand.
During the build, I get the now-infamous popup:
Title: "Save Modified VIs?"
Text: "An error occured while trying to read the dependencies of your VIs; a possible cause for this problem is VIs not saved in the current version of LabVIEW. Would you like to save any modified VIs now?"
I select "yes", and the build then fails with errors in the log pane of the "Build Status" window. The error is:
Error: Unable to find all subVIs from saved VIs, either a subVI is missing or the VI is not saved under the current LabVIEW version.
The missing file path is: etc, etc.
I go to said missing path. The VI is in fact present. I open the VI and do "Save All", try again. Same thing. Then, I try a Mass Compile on the test VI directory. Attempt to build again, same error.
Note that I do call some VIs dynamically, but those are all present in my workspace, and are not found in this error.
Is there a debugging option or log file or some kind of trace I can do to dig into this and find out the state of things causing the error? Please help me out here.
-Andy

One quick way to narrow down the issue is to change your LabVIEW adapter to Run-Time engine and then try and run the sequence in the Sequence Editor.
Also, triple check your search directories and make sure you're not pulling in VIs from an unexpected location.
When you see that dialog it's already too late to save so trying to Save at that point never works.
Another tip is to ignore which VIs it says are not saved in the current version and instead look at the subVIs that those VIs are calling. You can run into this if you have two subVIs loaded with the same name.
CTA, CLA, MTFBWY

SIM Error - Unable to find screen - Create Item Ticket and Signer error

Hi,
When I bring up the SIM application from Eclipse, everything works normally.
But I navigate to ITEM TICKET SCREEN, and here when i click on Create , to create an Item Ticket,
ideally It should open the Item Ticket Detail Screen,
instead it throws an error,
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen
and the screen is not opened, it just maintains the current screen which is ITEM TICKET LIST SCREEN,
but this is present in Navigation.xml screen and then i am able to find it in one for the project folders,
Any idea why exactly I am getting this issue, any way to make it work fine.
it was working sometime back, and i dont think any change regarding this has been made.
sim version :13.2
in a totally un-realted scenario (that's what I think, there is one more class "NEWRetailItemSearchProcessor", for this I get an exception,
signer information does not match signer information of other classes in the same package
I have two questions,
1. Is it because of the signer Issue, I am getting the other error -"*Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen*"
2. How do I resolve the signer issue,
it says,
class "oracle.retail.sim.closed.simclient.editor.NEWRetailItemSearchProcessor"'s signer information does not match signer information of other classes in the same package
but in this package "oracle.retail.sim.closed.simclient.editor" -- there is no other class except the one mentioned NEWRetailItemSearchProcessor
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] java.lang.SecurityException: class "oracle.retail.sim.closed.simclient.editor.NEWRetailItemSearchProcessor"'s signer information does not match signer information of other classes in the same package
     at java.lang.ClassLoader.checkCerts(ClassLoader.java:776)
     at java.lang.ClassLoader.preDefineClass(ClassLoader.java:488)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailPanel.initializeScreen(ItemTicketDetailPanel.java:136)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailPanel.<init>(ItemTicketDetailPanel.java:116)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen.<init>(ItemTicketDetailScreen.java:16)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
     at java.lang.Class.newInstance0(Class.java:350)
     at java.lang.Class.newInstance(Class.java:303)
     at oracle.retail.sim.closed.application.NavigationManager.createScreen(NavigationManager.java:166)
     at oracle.retail.sim.closed.application.NavigationManager.startScreen(NavigationManager.java:183)
     at oracle.retail.sim.closed.application.NavigationManager.navigate(NavigationManager.java:78)
     at oracle.retail.sim.closed.application.SimplifiedApplicationFrame.navigate(SimplifiedApplicationFrame.java:221)
     at oracle.retail.sim.closed.application.SimplifiedApplicationFrame.actionPerformed(SimplifiedApplicationFrame.java:211)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
     at java.awt.Component.processMouseEvent(Component.java:5517)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3129)
     at java.awt.Component.processEvent(Component.java:5282)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3984)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1791)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at oracle.retail.sim.closed.swing.event.HotKeyEventQueue.dispatchEvent(HotKeyEventQueue.java:34)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Edited by: 924506 on 14 Jan, 2013 3:53 AM

to fix the signer issue
1) open the jar which contains required class file( i mean the one which gets called when u click on item tick button)
in winrar software
2) and remove below files
manifest.mf and mykey.sf or somthing.sf
then resign your jar and deploy it.
i hop this would work fine.
some time what happen when we sign the jar it does not removes old sign instead removing it enter one more entry in that file
hence it has two entry.
its better to follow above steps.

Nokia Lumia 520 Error: Unable to find bootable opt...

My Nokia Lumia 520 unexpectadly shut down and reebotted as i proceeded to pause my music. now the only reaction i reiceve from it is a black screen which says Error: Unable to find bootable option. Press any key to shut down.
if anyone has only proven solutions in fixing this issue, please let me know.
Thanks.

Hi, srikanth93.
If you are pertaining to Lumia phones that has the Windows Phone 8.1 software, yes, those are supported by the Nokia Software Recovery Tool. You can verify this info here: http://www.microsoft.com/en-ph/mobile/support/product/lumia520/faq/?action=singleTopic&topic=FA14298.... If the recovery tool is installed on your computer & it's still not recognizing your phone, try to uninstall it and install again. By the way, have you tried coordinating this with a different Nokia Care Point for a second opinion?
Note that the link will direct you to the local support page of the Philippines. If you're from a different location, go here: http://www.microsoft.com/en/mobile/support/locations/.
Best of luck and welcome to the Nokia Support Discussions. ;-)

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

ERROR "Unable to find an entry point named OCIEnvCreate in DLL"

Similar Messages

Maybe you are looking for