Error: Unable to find the WSDL port defined for Service
Hi,
I am facing below error while invoking partner's WSDL:
Oracle.Fabric.Common.FabricInvocationException: Unable to find WSDL port defined for the service.
Can anybody guide me what could be the exact issue?
* I am able to ping that host.
Thanks
Richa
Hi Puneet,
I am able to access WSDL from the browser and value of Location in composite.xml is correct.
Regards.
Similar Messages
-
Internal error: Unable to find the access rule.
I have a Cisco ASA 5550 and using ASDM 6.2.
Opening the ASDM, in Firewall Dashboard, in Top 10 Access Rules, show the second rule with more hit: "interface X | source: any | Dest: any | Service: ip | Action: Permit.
During the day, the hits increase and decrease.
Well, the problem: That rule there isn't.
When I click with the right mouse button and click on show rule, a message is displayed:
"Internal error: Unable to find the access rule."
I can't find the rule in Configuration Mode and in Console Mode.
Well, the rule there isn't.
What can I do for this rule disappears from the Top 10 Dashboard?I suggest opening a case with Cisco TAC. This could be an issue with the device itself.
Please remember to select a correct answer and rate helpful posts -
hi,
am facing a problem deploying a list instance via a feature,
I created the list in the UI with content and views.
Exported the site template as WSP.
Imported into Visual Studio the list instance, pages module and property bags.
Copied into my new solution.
Deploy list instance as a site-collection level scoped feature.
activated the below features :
mylist_ModulesFeature
mylist_ListInstancesFeature
mylist_PropertyBagFeature
List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
can anyone pls help why i am getting this error ?try these links:
http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful -
Service PO is not picking the condition type defined for services
Hi Friends,
I am trying to create a PO for services.. but in conditions tab..the system is picking standard PO pricing procedure. It is not picking the service Pricing procedure MS0000. request your help in understanding the issue.
Also the PO is picking the Standard PO release strategy, but not the release startegy define for service..
thank you.
KireetiHi Kireeti,
Your condition schemes for services probably have been modified. Please check
schemes MS0000 and MS0001 in your customizing. For a correct price
determination it is important that for example condition type PRS
is in the first position, further the settings for the flag
'Condition determined manually' should'nt be altered.
Actually the standard schema looks like:
4 0 PRS Total Price X 5
5 1 PRS0 General Price Compon X
5 3 PRS1 Percentage of Wage X
5 5 PRS2 Overheads X
5 7 PRS3 Misc Price Component X
13 0 KR01 Header Discount X
14 0 KZ01 Header Surcharge X
Could you please change your schema and retest?.
Best Regards,
Arminda Jack -
Getting error "Unable to find the published output for this request"
1. Created a Data Template
2. Created a Data Definition using the above Data Template
3. Created a RTF template and registered the same in XML Publisher Administrator
4. Created Concurrent program for the data template using 'XDODTEXE' as executable
5. Ran the above concurrent program and it completed successfully.
6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
7. I can see the XML output in the $APPLCSF/out directory.
8. Also the short name for concurrent program and data definition code and template code are same.
I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
Am I missing something here. Can anyone come across this issue.
I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
ThanksI tried again after applying XDO 5.6.2. I am still not able to see the output.
Here is the logfile info. There is no mention of OPP or PUBLISH section:
XDO Data Engine ver 1.0
Resp: 21540
Org ID : 101
Request ID: 348042
All Parameters: p_batch_id=7169
Data Template Code: AUDRPT
Data Template Application Short Name: XXCUST
Debug Flag: Y
{p_batch_id=7169}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 348042
Number of copies : 0
Printer : noprint
Finished executing request completion options. -
Error - Unable to find the cube in catalog in Webi Report
Hi All,
We have a WEBI report built on SAP BW OLAP universe. The report is accessible from a user who has SAP_ALL authorization. However, a User role created to access and refresh the same report is giving the error message as below.
'' Unable to find cube <Multiprovider> in catalog $INFOCUBE (WIS10901)''
I have added the authorization object for BW workbench object Multiprovider and provided authorization. The same was tested in BW environment as well. However, the report could not be refreshed in BO WEBI.
SAP BW 7.01 and BO XI3.1.
Anybody who can help me on this? It could be that some authorizations are missing . But not sure how to trace what are missing.
Thanks and Regards
SrinivasTry searching for the InfoProvider/query in the transaction MDXTEST with the test user, you could get more detailed error messages there.
Here you will find how to activate traces on the BO side:
FEATURED EVENTS
But frankly speaking, I think BW traces will be more accurate in your case. -
Error: unable to find the directory
Hi experts!!
While configuring the scenario ( File to MSACCESS) , I am getting an error msg
<b>Processing Error: Directory /lenovo-1a1a67e1/sender does not exist!</b>
sender folder is in my Laptop and I configured the scenario in main server.
so it has to pick the files frm the laptop...( Source ).
can anyone help me how to give the parameters for ( when the file is in Network)
Thanks in advance
suneeeHi,
I configured FTP protocol and gave the parameters as follows:
FTP Connection Parameters:
server : 192.168.1.198
port : 21
anonymous logi - checked
connect mode : permanently
transfer mode : Binary
Folder : c:/sender
filename : access.xml
and now I am getting the error as follows....but the files in the source folder has not picked. the error is as follows:
S<b>ender Adapter v1014 for Party '', Service 'BS_ACCESS1_S':
Configured at 11:44:09 2007-01-11
Up and running - no message processing until now</b>
Thanks in advance.
Sunee -
Unable to find a WSDL that has a definition for service name
Hello,
I have a wsdl shared in mds and a composite with a bpel process that consumes that wsdl, but when that happens I get the following error:
oracle.fabric.common.FabricInvocationException: Unable to find the WSDL service defined for service name {http://directvla.com/schema/businessdomain/ServiceConfigurationRules/v1-0}ServiceConfigurationRules_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace and service name in the #wsdl.endpoint element. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.
I checked the composite, the wsdl and the endpoint and everything is ok. At the momment to avoid the error, the wsdl is local, but this is not a real solution, what I really need is to make it work with the mds.
Can somebody help me?
Thank for advance.Hi,
here is my wsdl:
<definitions
targetNamespace="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:commondt-v1-0="http://xxxxxx.com/schema/util/commondatatypes/v1-0"
xmlns:ns1="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:ServiceConfigurationRules-v1-0="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0" xmlns:tns="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:commonex-v1-0="http://xxxxxx.com/schema/util/commonexceptions/v1-0"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:commondt-v1-0="http://xxxxxx.com/schema/util/commondatatypes/v1-0" xmlns:ns1="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:ServiceConfigurationRules-v1-0="http://oracle.com/sca/soapservice/XXXXBusinessRule/ServiceConfigurationRules/ServiceConfigurationRules" xmlns:tns="http://oracle.com/sca/soapservice/XXXXBusinessRule/ServiceConfigurationRules/ServiceConfigurationRules"
xmlns:commonex-v1-0="http://xxxxxx.com/schema/util/commonexceptions/v1-0"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<xsd:import namespace="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters" schemaLocation="oramds:/apps/schemas/RESB/RulesParmsInput_2.xsd"/>
</xsd:schema>
</types>
<message name="ServiceActivationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationRequest"/>
</message>
<message name="ServiceActivationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationResponse"/>
</message>
<message name="ServiceActivationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationException"/>
</message>
<message name="GetAddActivationConfigurationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationRequest"/>
</message>
<message name="GetAddActivationConfigurationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationResponse"/>
</message>
<message name="GetAddActivationConfigurationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="ResourceChangeMigrationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationRequest"/>
</message>
<message name="ResourceChangeMigrationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationResponse"/>
</message>
<message name="ResourceChangeMigrationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationException"/>
</message>
<message name="ResourceChangeMigrationUpgradeRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeRequest"/>
</message>
<message name="ResourceChangeMigrationUpgradeResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeResponse"/>
</message>
<message name="ResourceChangeMigrationUpgradeException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeException"/>
</message>
<message name="GetServiceConfigurationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="GetAntenaSenialRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAntenaSenialRequest"/>
</message>
<message name="GetAntenaSenialResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAntenaSenialResponse"/>
</message>
<message name="GetAntenaSenialException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="OrderPayPerViewRuleRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleRequest"/>
</message>
<message name="OrderPayPerViewRuleResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleResponse"/>
</message>
<message name="OrderPayPerViewRuleException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleException"/>
</message>
<message name="GetOperationForWOServiceTypeRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeRequest"/>
</message>
<message name="GetOperationForWOServiceTypeResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeResponse"/>
</message>
<message name="GetOperationForWOServiceTypeException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeException"/>
</message>
<message name="CompareResourceTechnologyRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyRequest"/>
</message>
<message name="CompareResourceTechnologyResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyResponse"/>
</message>
<message name="CompareResourceTechnologyException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyException"/>
</message>
<message name="GetBasicProductMigrationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationRequest"/>
</message>
<message name="GetBasicProductMigrationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationResponse"/>
</message>
<message name="GetBasicProductMigrationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationException"/>
</message>
<message name="GetMaxResourcesForCustomerRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerRequest"/>
</message>
<message name="GetMaxResourcesForCustomerResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerResponse"/>
</message>
<message name="GetMaxResourcesForCustomerException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerException"/>
</message>
<portType name="ServiceConfigurationRules_pt">
<operation name="GetAddActivationConfiguration">
<input message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationResponse"/>
<fault name="GetAddActivationConfigurationException" message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</operation>
<operation name="ResourceChangeMigration">
<input message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationRequest"/>
<output message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationResponse"/>
<fault name="ResourceChangeMigrationException" message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationException"/>
</operation>
<operation name="ResourceChangeMigrationUpgrade">
<input message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeRequest"/>
<output message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeResponse"/>
<fault name="ResourceChangeMigrationUpgradeException" message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeException"/>
</operation>
<operation name="GetAntenaSenial">
<input message="ServiceConfigurationRules-v1-0:GetAntenaSenialRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetAntenaSenialResponse"/>
<fault name="GetReasonResponseException" message="ServiceConfigurationRules-v1-0:GetAntenaSenialException"/>
</operation>
<operation name="OrderPayPerViewRule">
<input message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleRequest"/>
<output message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleResponse"/>
<fault name="OrderPayPerViewRuleException" message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleException"/>
</operation>
<operation name="GetServiceActivation">
<input message="ServiceConfigurationRules-v1-0:ServiceActivationRequest"/>
<output message="ServiceConfigurationRules-v1-0:ServiceActivationResponse"/>
<fault name="ServiceActivationException" message="ServiceConfigurationRules-v1-0:ServiceActivationException"/>
</operation>
<operation name="GetOperationForWOServiceType">
<input message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeResponse"/>
<fault message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeException" name="GetOperationForWOServiceTypeException"/>
</operation>
<operation name="GetMaxResourcesForCustomer">
<input message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerResponse"/>
<fault message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerException" name="GetMaxResourcesForCustomerException"/>
</operation>
<operation name="GetBasicProductMigration">
<input message="ServiceConfigurationRules-v1-0:GetBasicProductMigrationRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetBasicProductMigrationResponse"/>
<fault message="ServiceConfigurationRules-v1-0:ServiceActivationRequest" name="GetBasicProductMigrationException"/>
</operation>
<operation name="CompareResourceTechnology">
<input message="ServiceConfigurationRules-v1-0:CompareResourceTechnologyRequest"/>
<output message="ServiceConfigurationRules-v1-0:CompareResourceTechnologyResponse"/>
<fault message="ServiceConfigurationRules-v1-0:ServiceActivationRequest" name="CompareResourceTechnologyException"/>
</operation>
</portType>
<binding name="ServiceConfigurationRules_ptSOAP11Binding" type="ServiceConfigurationRules-v1-0:ServiceConfigurationRules_pt">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetAddActivationConfiguration">
<soap:operation style="document" soapAction="http://xxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetAddActivationConfiguration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetAddActivationConfigurationException">
<soap:fault name="GetAddActivationConfigurationException" use="literal"/>
</fault>
</operation>
<operation name="ResourceChangeMigration">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/ResourceChangeMigration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ResourceChangeMigrationException">
<soap:fault name="ResourceChangeMigrationException" use="literal"/>
</fault>
</operation>
<operation name="ResourceChangeMigrationUpgrade">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/ResourceChangeMigrationUpgrade"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ResourceChangeMigrationUpgradeException">
<soap:fault name="ResourceChangeMigrationUpgradeException" use="literal"/>
</fault>
</operation>
<operation name="GetAntenaSenial">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetAntenaSenial"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetReasonResponseException">
<soap:fault name="GetReasonResponseException" use="literal"/>
</fault>
</operation>
<operation name="OrderPayPerViewRule">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/OrderPayPerViewRule"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="OrderPayPerViewRuleException">
<soap:fault name="OrderPayPerViewRuleException" use="literal"/>
</fault>
</operation>
<operation name="GetServiceActivation">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetServiceActivation"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ServiceActivationException">
<soap:fault name="ServiceActivationException" use="literal"/>
</fault>
</operation>
<operation name="GetOperationForWOServiceType">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetOperationForWOServiceType"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetOperationForWOServiceTypeException">
<soap:fault name="GetOperationForWOServiceTypeException" use="literal"/>
</fault>
</operation>
<operation name="GetMaxResourcesForCustomer">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetMaxResourcesForCustomer"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetMaxResourcesForCustomerException">
<soap:fault name="GetMaxResourcesForCustomerException" use="literal"/>
</fault>
</operation>
<operation name="GetBasicProductMigration">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetBasicProductMigration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetBasicProductMigrationException">
<soap:fault name="GetBasicProductMigrationException" use="literal"/>
</fault>
</operation>
<operation name="CompareResourceTechnology">
<soap:operation style="document" soapAction="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/CompareResourceTechnology"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="CompareResourceTechnologyException">
<soap:fault name="CompareResourceTechnologyException" use="literal"/>
</fault>
</operation>
</binding>
<plnk:partnerLinkType name="ServiceConfigurationRules_pt_PL">
<plnk:role name="ServiceConfigurationRules_pt_Role">
<plnk:portType name="tns:ServiceConfigurationRules_pt"/>
</plnk:role>
</plnk:partnerLinkType>
<service name="ServiceConfigurationRules_pt">
<port name="ServiceConfigurationRules_ptPort" binding="ServiceConfigurationRules-v1-0:ServiceConfigurationRules_ptSOAP11Binding">
<soap:address location="http://host:port/soa-infra/services/default/ServiceConfigurationRules/ServiceRules"/>
</port>
</service>
</definitions>
Thank you. -
Hi ;
I deployed a process. It was run correctly, but now i get this error:
Unable to find a WSDL that has a definition for service {http://xmlns.oracle.com/bpmn/bpmnProcess/MainProcess}MainProcess.service and port MainProcessPort. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server.
What's the my fault?Hello,
When are you getting the error? On deploy or when you try to actually call the WebService?
I've had that type of errors on deploy and it's usually a problem not with the exposed webservice, as the error would suggest, but with the consumed services. Check that you can access all the references of that process, and that there are no typos in them.
If it's when you actually call the webservice, can you access it in Enterprise Manager and call it there?
Hope this helps,
Diogo Henriques -
Unable to find an available port
Hi Folks, trying to call a ws using wsif. I can look at the wsdl and the factory serves up a non-null services instance but when I call service.getPort() I fail with the error "Unable to find an available port". The chosenPort and preferredPort attributes are null and the myPortsArr is empty. So I must be missing some setting. Here is the code snippet ... Any thoughts?
String methodName = "getPlanAuthority";
// get the service
WSIFServiceFactory factory = WSIFServiceFactory.newInstance();
WSIFService service = null;
try {
service = factory.getService(
"http://xxx.xxx.xxx/TPAHomeAuthorization/axis/services/TPAPlanAuthorizationService?wsdl",
null,
null,
"http://xxx.xxx.xxx/TPAHomeAuthorization/axis/services/TPAPlanAuthorizationService",
"TPAPlanAuthorizationServiceRemote");
service.mapType(AUTHORITY_QNAME, TPAPlanAuthorityBean.class);
service.mapType(AUTHORITY_RETURN_QNAME, TPAPlanAuthorityReturnBean.class);
WSIFPort port = service.getPort();
etc
etc
etcInclude the following jar's in your classpath and re-compile ur code. It should work:
- commons-discovery.jar
- servlet-2_2.jar
- axis.jar
- saaj.jar
- jaxrpc.jar -
Unable to read the WSDL in OWSM
Hello Everyone,
Iam trying to register BPEL Process on OWSM but it gives me error saying unable to find the WSDL error.
When I test the Web Service directly from the Web Page it does Load the WSDL on the Test Page.
But the moment the wsdl is wrapped with virtualized wsdl it does give the following error
Failed to read WSDL from http://192.168.190.47:9700/ccore/TestGateway/services/SID0003003?wsdl:WSDL not found
As per the troubleshooting document this error could occur for 2 reasons
1. If the Gateway is not registered properly on the Gateway.properties file.
2. If there is proxy or firewall issue.
Since the Service is local to the same server i dont see any firewall or proxy issue and i did check the Gateway properties file where the Gateway ID is register.I do see the ID present on the file.
Can someone tell what might be the issue ?
Regards
SabirHi Sab2
Please go through this thread
OWSM gateway issue
In your case, may be you need to redeploy the gateway
Regards,
Squirell -
Unable to find the published output for this request - problem
Hi ,
In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
Unable to find the published output for this request.
No output file exist for the request
and if i see the log file i get this message :
Arguments
P_INVOICE_ID='10243'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
+/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
XENVIRONMENT is set to /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_ALBANIA.UTF8
+' '+
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
PS: i am using ebs 11.5 version
Thanks in advance,
Best regardsHi,
REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
Regards,
Hussein -
Unable to find the workbook on server while accessing woekbook
I am opening in query in Bex analyzer
After getting the result , I am saving the file as workbook in favourites folder
It is not giving any error. When I try to open the workbook It shows me the name in the favourites folder, but gives error "Unable to find the workbook on server"
If I close the Bex analyzer and open again, its now showing the file in favourites folder meaning file was not saved on the server. I tried with sap_all authorization
Please helpHi,
I got the same problem as yours. But if "sap-all" given, it works. I do not want to give this authorization to all users, so would you pls tell me your final solution?
Thanks a lot.
BR.
Angela -
Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f.
PLease help, I've rstored from backup three times with no success I'm getting the following error
"Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f. "
It's LDap related but i have no idea why :-(
Best Regards BernhardIPv6 had been disabled for months on my SBS 2008 Server running Exchange 2007 SP1. I ran 40 or so Windows Updates; subsequently, the next morning Exchange was no longer running; topology issues, event ID 2604, 2114 and 2601 were all over my Application
Log. After 12 hours of research I found this post; figured it was worth a shot and instantly all my services for Exchange fired up. Thanks for the tip; I have no idea which update changed what in regards to needing IPv6 enabled, but that silly
little check mark fixed it.
Thank you for sharing your solution!
Dan -
APP Error : none of the payment methods defined for these items
Sapgurus,
I have posted a vendor invoice using F-43.
P.key 25 vendor account
P.key 50 bank account.
I have selected the payment method as Check.
So what I have posted is a vendor invoice for outgoing payment using T.Code F-43. Doc date -- Posting date -- B.line date entered - 08.06.2008
Now I want them to be cleared using APP. So I have created an APP run to be scheduled on 10.06.2008 and which takes up all documents posted upto 09.06.2008. I have selected paying company code, payment method , vendor maintained print program RFFOUS_C variant.
Now when I am doing the proposal run and then simultaneously the payment run. It is showing error that "none of the payment methods defined for these items" . Why is it so.
and no payments are being posted.
I checked in FBZP also that the paying bank is defined and in payment methods for that country check is there.
Please reply asap..
Thanks and regards,
PriyajitHello Ghosh,
Please check the following things
Customization:
1. Define pay method at country & co.code
2. Assign pay method to your vendor masters
3. Define bank determination with the combination of pay method
4. Have u assigned pay methods while positng business transactions
APP run:
1.Give your pay method
2.If u have any exeptions, pl edit the proposal and reallocate your correct pay method and rerun
this will helps you, if u have any querry pl revert
thanks
Para
Maybe you are looking for
-
This device is old. No color...really. iPod 20GB HP Click wheel. Need to have just 1 account instead of 2 apple id's with just one billing account.
-
How do I get icloud to work on mac osx v10.6?
My computer, MAC OSX v10.6.8 is not showing an icloud icon in Preferences. It has a mobil me icon but when clicked it says it has been moved to icloud. My ipad, iphone and Mac are not syncing. Help!
-
Question Mark in Safari, Quicktime , Movies don't play, Mime settings
I get a question mark in QT, using Safari, and latest updates, while trying to play movies. I notice the QT preferences will not stay when I close preferences, especially mime settings. I tried re-install, tried latest updates, throwing away preferen
-
When I go to the options and try to open "content" nothing happens.
I need to change my pop-up settings, and the content tab will not open.
-
hello friends, i was informed that i would be working on table controls through dialogue program, if any one has a sample code for tabel control through screens, plz post it here, so that , i can understand which command is to use for what, and what