Error - "... unable to find your response..."

When I click on the 'curly arrow', indicating my reply to an e-mail in my InBox, for another look at it, I (mostly) get this:
"Mail was unable to find your response to the message “xxxx”. You may have deleted the message"
The reply might have been sent only minutes before or weeks ago. Sometimes a reply I sent an hour ago is visible while one sent an hour & ten minutes ago isn't.
In all cases the reply is still in my Sent Mail folder and readable from there.
I've Rebuilt Mailboxes and am using a POP account.
Quitting Mail or Restarting the computer make no difference.
Using 10.4.9 with Mail 2.1.

Although one might think that re-creating the index should fix this problem, that almost never works. What sometimes works is restarting the computer or doing some cache-cleaning — don’t ask me why.
Read the following article for general troubleshooting and cache-cleaning procedures:
Resolving Disk, Permission, and Cache Corruption
In particular, be sure to verify/repair the startup disk (not just permissions), as described there, and to read this as well:
Side effects of System cache cleaning
In addition to the utilities mentioned there for cache cleaning, you may also consider OnyX or Cache Out X, which are free.

Similar Messages

Any Update on Mail's "unable to find your response"?

This has been discussed here in past years, I can see, but I'm still wondering if there's been a fix....
My Mail program (2.1.3) is still doing it about 50% of the time. An email I responded to just last night, still in my InBox (or it could be in the Trash as well) -- this morning I can't find using the round gray arrow, getting the same error message saying "Mail was unable to find your response to..."
Any fix for that? Isn't it about time for Apple to fix this? Or is Tiger a Dinosaur Apple wants to dump and forget about?.....

In your Inbox messages, whenever you reply to a certain message, there is a curved gray arrow created to the left of the message. When you click on that arrow, the reply message is suppose to open in a different window.
Ah, I see, thanks, is this a Pop or IMAP account?
I wish I could embed a screen shot....
To insert images into your post, use the <img>-tag. Note that the image you want to use in your post needs to be hosted online (e.g. on your .Mac website, etc.); you can not upload images to Apple Discussions.
For example...
<img src="/___sbsstatic___/migration-images/123/12353944-1.jpg">
displays the file stored at your specified location.

Linking replies to messages when "Mail is unable to find your response"

Hi all,
I have discovered that for some of my email Mail.app can't seem to find the reply sent when I click on the grey reply arrow that sits to the left of the email. I see the following Error Message: "Mail was unable to find your response to the message "###". You may have deleted the message." I have noticed that this usually occurs when I have replied to email via the .Mac website, instead of from my computer using Mail.app. For instance, when I travel.
The problem may be because I use my full name as the Full Name (sender identity) when replying via the .Mac website, but use my initials and surname as the Full Name (sender identity) when replying using Mail.app on my iMac. However, I am not convinced that this should make a difference as the actual email address is the same for both.
What I would like to know is, can I link the sent email to the original email? I can see them both and I'd love to be able to tell Mail, "Hey this was my reply!"
Any help or advice gratefully received.
TIA.

BUMP
Anybody know how to get the reply arrow icons to actually find the replies I have sent?
Or is this a case of whenever you reply to an email via the .Mac website, Mail.app will know you replied to it, but can't link the grey arrow to the message in the Sent Mail mailbox on the server?

Mail was unable to find your response

In the message viewer window, when you have responded to a msg, there is a little arrow icon. When you click on that icon, it's suppose to bring up your response. I have five email accounts (I know, I know, simplify) 1 .mac acct., 2 pop accts., and 2 IMAP accts.
I can use the response icon for all but one of the IMAP accounts (my main account of course).
So of the two IMAP accounts, the response icon works for one, but not the other. They have the exact same incoming mail server, and outgoing SMTP server, and they both are configured the same way in Acct Info, Behaviours, and Advanced settings. The only difference is the account user.
I'm stumpped. Any ideas?

This is a problem that has been reported here quite a few times and for which no solution has been found yet. Doing some cache-cleaning, or even just restarting the computer, fixed the problem in some cases.
Read the following article for general troubleshooting and cache-cleaning procedures:
Resolving Disk, Permission, and Cache Corruption
In particular, be sure to verify/repair the startup disk (not just permissions), as described there, and to read this as well:
Side effects of System cache cleaning
In addition to the utilities mentioned there for cache cleaning, you may also consider OnyX or Cache Out X, which are free.
Another thing that may be worth trying in your case is this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is stored.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Move the “IMAP-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

What settings do I need to have on my macbook pro to access student.ashford.edu when I get the following error message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your Sy

what settings do I need to have to access Ashford University's student portal using either Safari or Firefox when I get the following message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your System Administrator, or try again at a later time.

I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari. Obviously without a student password I cannot go any further. If you can do the same, then clearly the problem is at the other end. If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
Ciao.

Why do I get a error saying mail was unable to find your reply. You may have deleted message.

when sending email, I sometimes get an error stating: Mail was unable to find your reply to: You may have deleted message. This does not happen with every sent message but it is doing it more and more. The reply is no where to be found.

You posted in a 4 month old dead post.
You would do better by posting a "New Topic" in the OS/Mail forum area of which os you are using. You will need to indicate which version os you are using as well as which version of Mail you are using in order to get the proper attention to your post. This will help the users reading your post to suggest solutions.

Error: "Unable to find a working IR device" in Windows Vista 64-bit, Audigy 4

I have Audigy 4 Pro with the RM-500 remote that came with it.
The remote is not working in Vista 64-bit (Enterprise).
It is definitely not a hardware problem because everything works in Windows XP Professional SP3. When I dual boot into Vista, the remote doesn't control anything in Windows but the red light on the I/O external box is blinking so it's definitely receiving input.
When I run "Entertainment Center Settings", I get the error "Unable to find a working IR device" and all the options are greyed out.
<img title="err" width="300" style="width: 300px; height: 69px" src="http://img379.imageshack.us/img379/238/2278203yd.jpg" height="69" alt="err">
<img width="459" title="err2" style="width: 459px; height: 393px" src="http://img379.imageshack.us/img379/388/2850392ep2.jpg" height="393" alt="err2">
Has anyone gotten the remote working in Windows Vista 64-bit's? Thank you for your help.
Regards,
Lawrence

_ I am having this exact same issue on vista business 32 bit. Everything else on the external box works perfectly fine, except the remote. The remote does work however with intelliremote, but I cannot justify paying the money for such simple functionality. Any fix on [email protected]

[SOLVED] - Arch Boot Error: Unable to find Root Device /dev/sdb1

I had Arch running perfectly using /dev/sdb1 (versus Disk Label or UUID) and decided to do a update. After the Update I can't boot
to a running system, and I get this error message:
ERROR: Unable to find root device /dev/sdb1
You are being dropped into a recovery shell.
Is there an easy way to convert to UUID or Disk Label since the latest Upgrade doesn't allow me to continue to use /dev/sdb1 ??
I'd prefer not to have to rebuild both USB Flash Drives to get functional systems.
Any Help is greatly appreciated.
Suggestions?
Larry
Last edited by lkraemer (2012-02-21 15:14:02)

Check your grub and read https://wiki.archlinux.org/index.php/UUID#By-uuid
Edit:
https://bbs.archlinux.org/viewtopic.php … 0#p1059160
https://bbs.archlinux.org/viewtopic.php?pid=1059338
https://bbs.archlinux.org/viewtopic.php?id=135288
Last edited by karol (2012-02-21 01:07:21)

Debugging in JDev91, "Error: Unable to find fdebug.exe"

Hi,
I'm using JDev9i in Windows2000. When I try to debug my software JDev9i says; "Error: Unable to find fdebug.exe".
I have checked all security settings of my folders, (as someone proposed here to some one else, who had problem which was also linked somehow to fdebug.exe -file), but security settings were ok.
Can someone help me somehow ?
.JKa.

have you checked that fdebug.exe is on your system?
It should be in <jdevroot>\jdk\jre\bin

Digital Signature- SSF error: Unable to find external security product

Dear Friends,
After I enter my User ID and Password, this displays this error !!!
SSF error: Unable to find external security product
Would really appreciate your help.
Thanks,
Sri

Hi Sri,
Would you pls check the installation of the security toolkit on your application server?
Which security product do you use?
The standard security product is SAPSECULIB (library sapsecu.dll).
Please check the SSF initialization messages which are contained in each dev_w## developer trace (transaction ST11). When successful, the initializaion messages look like this:
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/<SID>/SYS/exe/run/sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
General information for SAPSECULIB can be found in SAP note 354819.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Nokia Lumia 620 "Error: Unable to find bootable op...

Hello
I'm in need of some help with my Nokia Lumia 620. It is 21 months old. It was running on Lumia Denim (WindowsPhone8 (8.10.14219) according to the Hardware/Software Info on my account on windowsphone.com)
Today the screen suddenly went black when I tried to open the email app and started to display the message "Error: Unable to find bootable option. Press any key to shutdown"
I have tried removing the battery and replacing it after ten mins. I still get the error.
I have tried removing the battery and sim card and replacing the battery after ten mins. Still no joy.
I have tried to perform a HARD reset. This doesn't work as as soon as the power button vibrates and I press the volume down button the phone shuts down, the exclamation mark never appears.
Please could you point me in the right direction for solving this and getting my phone up and running

Hi, deffers90. Welcome to Microsoft Mobile Community. Since all the possible troubleshooting steps didn't help, consider sending the phone to our Care Points for assessment as suggested by @93tid. Everything will be deleted once the phone undergoes repair. To look for the nearest Care Points within your area, see: Local support. Keep us posted.

JVM Loader Error: Unable to find supported JDK or JRE version

Hello,
I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
When I try to run idl2java, it gives me the following message:
JVM Loader Error:
Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
I looked in the forum and tried the suggestions given in this thread
http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
Where am I going wrong. Can someone help me?
Thaks
Manju

Hi,
I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
Hope this helps.
Regards,
Sony.

Nokia 822 ERROR: Unable to find bootable option.

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down."
This occurred earlier today immediately upon installing a Verizon update. The phone worked perfectly before the update.
What is going on? I certainly am not going to accept responsibility for this failure, or replacing this phone.
Before you ask, the phone is in perfect condition otherwise. Never dropped. Never seen even a drop of water (or any other liquid).
One thing peculiar I did notice was that the update took over an hour to download, which seems like quite a long time considering data transfer rates.
So, what can be done?
To recap:
1) My phone worked perfectly. It was in perfect condition.
2) An update was installed (which Verizon recommended (and I'd go as far as to say forced))
3) Now the phone is completely inoperable, only giving the error message listed above.
Help please?

Hi Joel, the sim card has been removed and reinstalled multiple times with no effect. And yes, only the the original Verizon software was on the device. To be clear, the phone was attempting to install a Verizon-forced update when it died. I would rather have not had the update because the phone was working perfectly, but Verizon does not give the option to decline updates, only delay them. It should be noted that with the help of Verizon associate (Lovesa) the Nokia Software Recovery Tool was attempted, but even that did nothing.
I have now done at least 8 hours of research on this and it is obvious this is a widespread and known issue with the 822. There appears to be absolutely nothing that can be done to revive the phone at this point. After viewing literally hundreds of posts on the "unable to find bootable option" error no one has found a fix. This issue is well documented.
Why Verizon would force an update that ruins users phones is beyond me. And to take no responsibility is, in my view (and most likely the law's view), criminal. To be completely honest and forthright, I am so upset about this situation Verizon is now losing a 15 year loyal customer.

[SOLVED] ERROR: Unable to find root device '/dev/sda3'

Earlier I updated the kernel to my arch system and found this error while trying to boot. I hate to post this because there are so many topics like it, but I've been looking for hours for a solution to this problem and can't find one.
Here is the output:
Booting 'Arch Linux'
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernet /vmlinuz-linux root=/dev/sda3 ro
[Linux-bzImage, setup=0x4200, size=0x2ff2d0]
initrd /initrd @ 0xfd17000, 0x2c878c bytes]
Probing EDD (edd=off to disable)... ok
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
:: Starting udevd...
done.
Waiting 10 seconds for device /dev/sda3 ...
ERROR: device '/dev/sda3' not found. skipping fsck.
ERROR: Unable to find root device '/dev/sda3'.
You are being dropped to a recovery shell
type 'exit' to try and continue booting
sh: can't access tty; job control turned off
My partition layout is like this:
swap: /dev/sda1
boot: /dev/sda2
root: /dev/sda3
extended: /dev/sda4
home: /dev/sda5
I have two hard drives, but i'm sure /dev/sda is the one with my OS.
Here are some things I've tried:
This was at the very bottom of the pacman wiki
# mkdir /mnt/arch
# mount /dev/sdaX /mnt/arch (your root partition)
# cd /mnt/arch
# mount -t proc proc proc/
# mount -t sysfs sys sys/
# mount -o bind /dev dev/
# mount /dev/sdaX boot/ (your /boot partition) #This step is not needed if you do not have a separate boot partition
# chroot .
# pacman -Syu udev mkinitcpio
# mkinitcpio -p linux
I've also tried performing the above, downgrading the kernel, updating my mirrorlist, reinstalling the kernel, and rebooting as mentioned here.
I've alsa tried a few other things that I've read, but can no longer remember.
Any help would be greatly appreciated! Thanks.
Last edited by colton7909 (2012-05-25 02:09:36)

Thank colton
Same problem here, but on a mac book (not mine eyh )
So, for those how have the problem (or need a live usb for mac or uefi systems),
1) with a 32bits system
- download gparted live cd
- use it for the step 3
2) with a 64bits system:
- you need the gparted live cd too: mount it and copy the EFI directory somewhere; then umount it;
- download a 64bits system (system rescue cd, as colton said is enough, follow the instructions for installation on their website first);
- mount you live usb, install the 64bits system;
- copy EFI system on the key
- edit the grub.cfg in EFI/boot/ , add the following before the other entries:
menuentry "System Rescue" {
set gfxpayload=keep
linux /syslinux/altker64 nomodeset efi
initrd /syslinux/initram.igz
3) repairing...
- boot the broken computer with the live usb
- mount the partition on which your system is (e.g. /dev/sda1 on /mnt)
- chroot it, init the system as needed (mount /dev, /proc, etc. the easier way is using init scripts)
% chroot /mnt /bin/bash
% /etc/rc.sysinit
% mkinitcpio -p linux

AutoPatch error: Unable to find job when restart

OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725...
Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist
In the NLS patch update with 4 merged patches,
while 16 workers are running to create rdf files as below, it made my Putty (v0.60) crashed. Below example is succeeded case taken from the log of one worker to let you know which task was on-going...
Source: /d01/oracle/SID/apps/apps_st/appl/pa/12.0.0/reports/SF/PAXPCTCE.rdf
Successfully generated report "PAXPCTCE.rdf".
Generated 1 files successfully.
Generated 0 files with non-fatal warnings.
Generated 0 files with fatal errors.
adrepgen is exiting with status 0
End of adrepgen session
Date/time is Wed Sep 07 2011 15:22:44
Eventually, I had to run adctrl for changing job status <Failed>, and re-run adpatch. Then it ran several assigned jobs completed successfully.
Then again, it made my Putty crash, and repeated few times like that.
When there are 69 jobs remaining, autopatch error occurred.
There are now 69 jobs remaining (current phase=A1001):
0 running, 69 ready to run and 0 waiting.
Reading completed jobs from restart file (if any).
AutoPatch error:
Unable to find job when restarting.
When adctrl was checked to see worker status [1],
Enter your choice [1] : 1
Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved?
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?
Thanks as always for the help.
- SH

Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved? If the table does not exist, then you cannot fix it.
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?Correct -- This is the only option you have.
Thanks,
Hussein

Error - "... unable to find your response..."

Similar Messages

Maybe you are looking for