Error: Unable to Load "Cross Dissolve"
I'm trying to create a QuickTime of a video project that I'm working on, and every time I try to export I get an error that FCP was unable to load the cross dissolve video transition. This is Final Cut Pro 6.0.3, and the project contains HDV, DV and DVCPro 50 footage, with the sequence settings for HDV (HDV 720p30 - DVCPro HD Codec). This project has been exported successfully before, in fact once just 2 hours prior to the first occurrence of this error (which was 2 days ago). Ever since the first occurrence, I have been unable to export it. Has anyone had this problem, or a problem similar to this? Does anyone know of any work-arounds or solutions? Thanks.
The usual cause for this is that the database has become corrupted - or one or more key files was somehow deleted. Take a look at the application log and see if there is a more detailed message. Unfortunately, if the data has been corrupted, you will have to recover from backup, or rebuild your cube.To get the database started, you can go into the database directory and delete the *.ind, *.pag, *.tct, *.ind and *.esm files. This will allow the app to start, but the data will be GONE - you will HAVE to reload and calc it, or restore from backup.Regards,Jade--------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]
Similar Messages
-
Error: Unable to Load Database
Anyone seen this error: "Unable to Load Database"? How to recover? A link or a page for me to read would work too. thx! James
The usual cause for this is that the database has become corrupted - or one or more key files was somehow deleted. Take a look at the application log and see if there is a more detailed message. Unfortunately, if the data has been corrupted, you will have to recover from backup, or rebuild your cube.To get the database started, you can go into the database directory and delete the *.ind, *.pag, *.tct, *.ind and *.esm files. This will allow the app to start, but the data will be GONE - you will HAVE to reload and calc it, or restore from backup.Regards,Jade--------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]
-
Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XPUse these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/ -
Microsoft Visual Basic 2010 Express.
I am new to Visual Basic programing and i am trying to understand the relationships between Datasets, database, table Adaptors. I have to following code that is is giving me the following error" Unable to load, Update requires a valid DeleteCommand
when passed DataRow collection with deleted rows".
I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
It seems that i can delete the data on the DataGridView Table and it only displays the correct data. but my database is not updating, even though the data grid displays differently.I can determine this because, when i save the offset database, i have all
the previous uploads and all the rows that i wanted to delete are still there.
My final goal is to be able to import offset data from a CSV file, save this data on the pc, send a copy of this data to a NuermicUpDown so the customer can modify certain numbers. From here they download all the date to a controller. IF the customer
needs to modify the imported data, they can go to a tab with a data grid view and modify the table. They will also have to option to save the modified data into a csv file.
Im not sure if i am making this overcomplicated or if there is a easier way to program this.
CODE:
Private Function LoadOffSetData()
Dim LoadOffsetDialog As New OpenFileDialog 'create a new open file dialog and setup its parameters
LoadOffsetDialog.DefaultExt = "csv"
LoadOffsetDialog.Filter = "csv|*.csv"
LoadOffsetDialog.Title = "Load Offset Data"
LoadOffsetDialog.FileName = "RollCoaterOffset.csv"
If LoadOffsetDialog.ShowDialog() = Windows.Forms.DialogResult.OK Then 'show the dialog and if the result is ok then
Try
Dim myStream As New System.IO.StreamReader(LoadOffsetDialog.OpenFile) 'try to open the file with a stream reader
If (myStream IsNot Nothing) Then 'if the file is valid
For Each oldRow As MaterionOffsetDataSet.OffsetTableRow In MaterionOffsetDataSet.OffsetTable.Rows
oldRow.Delete()
'delete all of the existing rows
Next
'OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
Dim rowvalue As String
Dim cellvalue(25) As String
'Reading CSV file content
While myStream.Peek() <> -1
Dim NRow As MaterionOffsetDataSet.OffsetTableRow
rowvalue = myStream.ReadLine()
cellvalue = rowvalue.Split(","c) 'check what is ur separator
NRow = MaterionOffsetDataSet.OffsetTable.Rows.Add(cellvalue)
Me.OffsetTableTableAdapter.Update(NRow)
End While
Me.OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
MainOffset.Value = OffsetTableTableAdapter.MainOffsetValue 'saves all the table offsets
to the offset numericUpDown registers in the main window
StationOffset01.Value = OffsetTableTableAdapter.Station01Value
StationOffset02.Value = OffsetTableTableAdapter.Station02Value
myStream.Close() 'close the stream
Return True
Else 'if we were not able to open the file then
MsgBox("Unable to load, check file name and location") 'let the operator know that the file wasn't able to open
Return False
End If
Catch ex As Exception
MsgBox("Unable to load, " + ex.Message)
Return False
End Try
Else
Return False
End If
End FunctionHello SaulMTZ,
>>I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
This error usually shows that you do not initialize the
DeleteCommand object, you could check this
article to see if you get a workaround.
>> Im not sure if i am making this overcomplicated or if there is a easier way to program this.
If you are working CSV file, you could use OleDB to read it which would treat the CSV file as a Table:
http://www.codeproject.com/Articles/27802/Using-OleDb-to-Import-Text-Files-tab-CSV-custom
which seems to be easier (in my opinion).
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Flex Builder 3 Error: Unable to load SWC
Hi,
I am trying to use the YahooMaps component (YahooMaps.swc) in
my application. I have included it in the build path of my
application.
Steps followed:
1. Right-click on the project and choose Properties or open
the Project menu and choose Properties.
2. In the project properties dialog, choose Flex Build Path.
3. Select the Library path tab, and press the Add SWC...
button.
4. Selected the YahooMap.swc
I still get "Unable to load SWC: YahooMap.swc". It is an AS
3.0 component. Any help will be appreciated.
Thanks
SumitHi Peter,
Thank you for your reply.
I have followed the documentation on the site you provided.
All I have done so far is:
1. Create a new flex project in Flex Builder 3
2. Once the project is created, I try to add the YahooMap.swc
to my Flex build path.
3. Once I add the YahooMap.swc, it fails with the error
"Unable to load YahooMap.swc" in Flex Builder 3.
4. FB3 does not recognize YahooMap when I try to import it in
AS3.
import com.yahoo.maps.api.YahooMap;
I am not sure what I am doing wrong. Does it have to do
something with the version Y! has used to build the YahooMap.swc
and Flex Builder 3?
Thanks
Sumit -
I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
CSA MC Install error: Unable to load patch information
When we try to install CSA MC 5.2.0.263 (and 5.2.0.203) on Windows Server 2003 Ent Ed (or R2) we receive error:
"Unable to load patch information into the database"
How to solve the given error?Just a couple things to check. If running the CSA agent on the MC make sure its disabled during the upgrade
You have enough free space in the installation directory -
Hi,
I appollogize if this post is off topic. I have problem wiht publish WebApp MVC.
I have website (MVC) with one Web reference. Build and run in VS working. But when I tried to publish to disk I get error:
SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
I have VS2013 Profesional with all updates and Windows 8.1.
If I remove web reference then publishing working. Where can be a problem? Thanks.@Marek Bober,
Thanks for sharing the solution back to here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Web Report Viewer error - Unable to load client print control.
Dear All,
We have a problem with Report Viewer print funtionality. Getting the error "Unable to load client print control." on click of Print button.
We tried all solutions posted in web - nothing resolves the issue.
The print works fine when we open the report via a browser. But the same is not working through our application. We have the application installed on the Report server itself and the user has Admin previleges.
Please find below the details
Report control: ReportViewerWebControl.axd
Version: 9.0.30729.4402
SQL server version: SQL Server 2008 R2, 10.50.2500.0 (running on Windows Server 2008 R2 - 64 bit)
Your help on this would be highly appreciated. Please let me know if you need any specific information.
Thanks,
Naga
NagarajaHi, Larry,
Thank you for your answer which remind me and lead me to the resolution. I have struggling on this SQL Server Report Server 2012/Client printing control for
2 days.
I just cannot figure out why it kept prompting non-admin XenApp users for SSRS installation. Thanks for your notes again.
I have 2008 R2 server setup as XenApp server for the publish apps. We published the IE to user to access Web application with SQL 2012 reporting service in
the backend.
In the control environment, users do not have permission to install any software. This SSRS has to be installed as administrator under “Install mode” in XenApp
server.
Yes, 32bit IE works for me but 64bit IE works too.
You just need to ensure which version of IE you’re using to install the SSRS. I’m not aware of using 32bit IE for SSRS installation in server but publish 64bit
IE to client. That’s my mistake.
Thanks again.
JohnnyW2012 -
I get the error "unable to load data class info from sync services" and eventully itunes freezes. will this article help me?
Hello there brigidfromca.
Messages can always be pretty daunting when we're not sure where to start. I was able to locate the following Knowledge Base article that discusses the very message you're getting:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
It is a pretty thorough document with multiple steps to review, but looks to be great place to start for a resolution for you.
Thanks for using Apple Support Communities to reach out to us for answers.
Cheers,
Pedro D. -
Error: Unable to load the GSS-API Shared Library
Hi all,
I'm trying to install a working copy of SAP on a Debian Etch host. I've tried all versions available here: ftp://ftp.sap.com/pub/sapgui/java/ (710 r[2-6]) The jar installer completes successfully without error, but when I attempt to launch the application, I'm greeted with the same critical error each time. Here's my connection string:
conn=/M/my-server-hostname/S/3610/G/PRD_GENERIC&sncon=true&sncqop=3
Here's my (Sun) java version:
java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) Server VM (build 10.0-b22, mixed mode)
Here's the full error message:
Error: Unable to load the GSS-API Shared Library
named "sncgss.so"
Fri Nov 21 16:07:25 2008
Release 710
Component SNC (Secure Network Communication), version 5
rc = -1, module sncxxdl_mt.c, line 342
Detail SncPDLInit
System Call dlopen
Is there a software dependency I might be missing? This is my first attempt at installing SAP on a Linux host, so there may be something else even more obvious that I'm not seeing...
Thanks in advance for any help you can provide.
-EricHi,
one solution should be to set the env variable $SNC_LIB to you libseude.so, e.g.
$>setenv SNC_LIB /usr/sap/<sid>/SYS/exe/run/libsecude.o (or wherever the lib resides)
and then restart guilogon.
Also, as fas as I know, SAPGUI has issues with Java 6, so I would rather go with Java 5 or 1.4.2.
Oliver Stabel -
Error: Unable to load style(SWF is not a loadable module)
Hi,
While i am trying to load theme dynamically from server, i am getting an error like this
Error: Unable to load style(SWF is not a loadable module)
Can anybody help me.
regards,
Jayagopal.Hi,
The source file is .swf ie(.css is converted to .swf).
Main swf is running from local.
Style module is from server.
I set security domain. But it throws security sanbox violation.
What should i do. Even some time if a use the local url means it thorws the same error Unable to load style(SWF is not a loadable module).
thanks,
Jayagopal. -
Error "Unable to Load URL" in Dashboard Design 4.1 SP2 while create web service connection
Hello Experts,
I am using SAP BO Dashboard Design 4.1 SP2.
I have create one web Intelligence report and from it i create web services url using of publish data feature.
when I use this url to create Web service(Qaaws) connection in dashboard It is showing me error " Unable to Load URL "
URL is working fine in browser in server system where i install SAP BO 4.2 but it is not working in my system where i installed dashboard design.
Please suggest how do i make connection using of this URL in dashboard.
Do i miss something or doing wrong ? then guide me.
Thanks and Regards,
Dhaval DaveHi Dave,
Please check the below link,
How to create Xcelsius Dashboard based of BI Web Service ( BIWS )
Using Webservice in Dashboard
Webservices in Dashboard - Issue
Also change your original link here and try to load
(sample link)
From:
http://BOE:8080/dswsbobje/qaawsservice/bisw?def=1&cuid=xxxxxxxxxx
To:
http://BOE:8080/dswsbobje/qaawsservice/bisw?wsdl=1&cuid=xxxxxxxxxx
or else can you post your url here.
Hope this helps.
--SumanT -
Running Extension Points sample Helloworld gives Error: unable to load...
Hi....
It looks like I don't have cez_inproc in my library path? I am just wondering is there anything I am missing? I followed all the directions correctly as mentioned in the webi extension doc.
Thanks,
-gandhams
java.lang.UnsatisfiedLinkError: no cdz_inproc in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.businessobjects.cdz_inproc.client.JniFacade.<clinit>(Unknown Source)
at com.businessobjects.cdz_inproc.client.CollocatedContainer.init(Unknown Source)
at com.businessobjects.cdz_inproc.client.CollocatedContainer.init(Unknown Source)
at com.businessobjects.webi.richclient.ConnectionAdapter.initContainer(Unknown Source)
at com.businessobjects.webi.richclient.ConnectionAdapter.<init>(Unknown Source)
at com.businessobjects.webi.richclient.Startup.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.businessobjects.webi.richclient.SplashWindow.invokeMain(Unknown Source)
at com.businessobjects.webi.richclient.Main.main(Unknown Source)
ERROR : unable to load the cdz_inproc library
com.businessobjects.cdz_inproc.client.ContainerException: stopContainer failed : java.lang.UnsatisfiedLinkError: com.businessobjects.cdz_inproc.client.JniFacade.stopContainer(Lcom/businessobjects/cdz_inproc/client/InvocationStatus;)V
at com.businessobjects.cdz_inproc.client.CollocatedContainer.stop(Unknown Source)
at com.businessobjects.webi.richclient.ConnectionAdapter.die(Unknown Source)
at com.businessobjects.webi.richclient.Startup.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.businessobjects.webi.richclient.SplashWindow.invokeMain(Unknown Source)
at com.businessobjects.webi.richclient.Main.main(Unknown Source)Srinivas,
I am getting the same error message with "cdz_inproc".
Can you please let me know what was the "classpath" when you were getting that error and what did you change it to later to resolve the issue?
Thanks
Krishna. -
LMS 4.1 error unable to load the MIB file
when load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI
I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my
ThankThe following thread has RFC-1212.my in it. You can downlaod from there :
https://supportforums.cisco.com/thread/174886
Mostly all the Cisco MIB will be available @ :
ftp://ftp.cisco.com/pub/mibs/v1/ OR ftp://ftp.cisco.com/pub/mibs/v2/
The above you requested are non-cisco mib, which can be extracted either from RFC or they canbe found in some univerisites FTP or some free sites like oidview :
http://www.oidview.com/mibs/detail.html
-Thanks
Vinod
Maybe you are looking for
-
I suspect I will be able to use the sidebar to organize my bookmarks, just like organize bookmarks used to work, now that I have found this out. But, it took me many tries over a month, to get the answer, and about 20 minutes just now. So, this is ju
-
Hello all, In HTML DB translation of Forms is an easy task. I am not quite sure how this can be done in portal. So please could you tell me about a good approach that I should follow in order to translate Portal Forms. Currently we have Portal 3.0.9
-
Block return sales orders or credit notes?
Hi, Could someone please explain how I block return sales orders or credit notes? Also is there a way of searching which sales order documet types have been used for credit notes? Thanks
-
Reverse PO Release strategies - "Document has already been outputted"
Hi SAP Expert need your help to solve this issues. I'm trying to reverse back the PO release strategies in order for me to change the GL code, when i click on the reverse indicator the system tell me that "Document has already been outputted". what d
-
Unable to start MS NoClassDefFoundError: weblogic/sip/tools/SipToolsFactory
Hi Folks, I really need ur assistance on this, I am failing to start my weblogic managed server which is on WL 10.3.4 and hosted on Windows 2008R2 server. I am getting the below exception: <<WLS Kernel>> <> <> <1365769487402> <BEA-000386> <Server sub