Error: Unable to Update Catalog while upgrading catalog from lr4 to lr5

I just recently installed Lightroom 5 from my new Creative Cloud account. While accessing for the first time, it asks me to upgrade the lr4 catalog to lr5. Everytime I run the process, I eceive the following message below.
I tried optimizing the lr4 catalog, but that diddn't work. I saw another post saying to try upgrading the lr4 backup catalog, but that didn't work also.
Any suggestions? Please help since I a newer user to Lightroom.
Thanks,
Mark

Try this:
Make sure this checkbox is checked in the System/Sharing preference pane:
If it is, uncheck it and then recheck and try ordering again.
OT

Similar Messages

Problems after upgrading catalog from LR4 to LR5

After upgrading a LR 4 catalog to LR5, I moved some files around between sub folders. I then went to sync up the parent folder. The dialog box said that I would be importing 12,000 photos and deleting 12,000 missing photos. My folder structure for a ctalog is a parent folder named for the year and the sub folders with the date and shoot description. I was synchronizing the parent (year) folder. When it finished, the folder structure was correct and the photos were in their new(correct) folders. However, all of my LR4 adjustments that had been made in LR4 were gone. There was no history either. It was like I was importing for the first time.
I upgraded the original catalog again and the photos were in the original locations just like the first time I upgraded. I tried to sync an individual folder and it imported 50 new files and deleted 50 missing files. Again the LR adjustments were gone. Any suggestions on how to sync an upgraded catalog without losing my prior version adjustments?
Mac OS X 10.9.2
LR 5.3

Yes, synchronizing is not the tool you should be using in this case, when you move photos from one folder to another. The proper method is to reconnect your photos in Lightroom after you moved them via: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm. But your current catalog has lost its edit information, so this will not help on your current catalog. So ...
I hope you have a backup of the catalog file before you did the synchronization, or otherwise you will have to upgrade your LR4 catalog again. Open one of those and then reconnect as in the link.
As side advice, perhaps you might want to consider using an organizing technique that does NOT require moving phtoos/folders from here to there. You might want to consider using organizing and searching via keywords and captions and other metadata, which does not require moving photos, and does not require re-linking photos, and gives you the ability to place photos in more than one "category" (keyword), rather than with folders where a photo can be in at most one "category" (folder)

Error: 1013231 Unable to update database while in readonly mode for backup

Hi all,
Wen im deleting the members for dimendsion , its giving error (hyperion 11.1 aso)
Error: 1013231 Unable to update database while in readonly mode for backup , how can i solve this problem ,plz can any one help on this
Thanks

Has somebody set the database ready for archiving, maybe some maxl has been run and the db has not been returned from read only mode.
Try running the following Maxl (change app.db to match your app/db)
alter database app.db end archive;
Cheers
John
http://john-goodwin.blogspot.com/

NETUI ERROR: Unable to update expression

Hi
i get following error in the command prompt
NETUI ERROR: Unable to update expression "{actionForm.userId}" with the value
[a
sd]. The typical cause is that the object represented by the expression is not
available or is the wrong type for updating.
What may be wrong
Thanks in Advance
M BHat

thanks :)
Thank you for any and all help,
Geoffrey
"M Bhat" <[email protected]> schreef in bericht
news:3fc2d003$[email protected]..
>
Hi geof..
It is fixed now. please look for the same in portal news grp. Thanks toBeko.
>
rgds
MBhat
"Geoffrey" <[email protected]> wrote:
The action method's form doesn't have the property (attribute with
get/setter).
However, if you chain actions like I am trying, it could be that your
first
action processes the form, while the second doesn't use the form but
still
triggers the error.
Take a look int the portal newgroup for my post.
I don't know how to solve it yet.
Thank you for any and all help,
Geoffrey
"M Bhat" <[email protected]> schreef in bericht
news:3fc1e741$[email protected]..
Hi
i get following error in the command prompt
NETUI ERROR: Unable to update expression "{actionForm.userId}" withthe
value
[a
sd]. The typical cause is that the object represented by the
expression
is not
available or is the wrong type for updating.
What may be wrong
Thanks in Advance
M BHat

Resolution to error - Unable to update Database Statistics

OK, If there's one thing i hate most about SAP, its the dreaded installation, I am always so paranoid, as to something will definitely go wrong,
Lately i realized that it aint my mind , but the damn installation itself is pretty damn stupid. Why cant SAP leave the installation packaging to professionals like installshield...
Unfortunately SAP doesnt think of it as a better idea, so until then lets try to resolve as many errors as possible thru these forums..
Here's one error resolution ,i am pretty sure, many are checking for..
Use the following procedure to resolve error
<b>Warning - "loading of sql client library oci.dll failed"
Error - Unable to update Database Statistics, Check BRCONNECT.log</b>
The problem seems to be with the SAP Patch Collection InstallMaster disc Material No.(<b>51032143_13</b>).
To resolve the problem, here's what needs to be done,
1)Install DB Instance as usual.Then after the installation errors out due to loading of sql
client library oci.dll ..
2)I unsar the downloaded DBATOOLS.sar (Thanks for the Link Andreaz!!!)
log into sapnet (eg. service.sap.com) with your user-id/pwd:
-> downloads -> support packages and patches -> entry by application group -> additional
components -> sap kernel -> now chose either 32 or 64 bit; either unicode or non-unicode ->
sap kernel 6.40 -> windows server -> oracle -> download the package DBATOOLS Package for
Oracle 9.2.x ... brconnect is part of that package...
3)Copy the files in the Unsar'd package, as follows
     overwrite br*.exe to S:\usr\sap\R31\SYS\exe\run
     overwrite initSID.sap to S:\usr\sap\R31\SYS\exe\run &
S:\usr\sap\R31\SYS\exe\nuc\NTI386
     overwrite libsbt.dll to S:\usr\sap\R31\SYS\exe\run &
S:\usr\sap\R31\SYS\exe\nuc\NTI386
     overwrite sapdba_role.sql to S:\usr\sap\R31\SYS\exe\run &
S:\usr\sap\R31\SYS\exe\nuc\NTI386
4) Retry the installation again & Guess what!! it works....
Warning-: I initially tried a shortcut by replacing DBATOOLS.sar on the installmaster disc, rather than following above steps, but that doesnt seem to work, the installation fails as as soon as Tablespace creation starts. So the shortcut aint a good one..

Well, it looks like you resolved your problem yourself.
you can send feedback to SAP directly instead of posting this here in a forum.

HT201210 Am getting an error unable to update when trying to install ISO6 on my Ipad

I was try to update my ipad2 to new ISO6 it download but after download if click on install it writes verifying then its giving me an error unable to update how can I fix the problem .

Hi:Thanks for your response.The following code works fine in a standard VB.Net windows Application,It is just a send and receive instruction to a power meter over the GPIB bus.This code is behind a Button,and a label displays the result.I have a problem when I try to duplicate this simple code on an ASP.Net page using Server controls.When you click the button the code is supposed to execute on the server side and not the client side(browser).The code fails when it gets to the viOpenDefaultRM line,I get an error message as follows System.DllNotFoundException:Unable to Load Dll(VISA32.DLL).I have added a reference to the visa library from within the project.
'''''This is the code I am using'''''
Dim lsnbuf As String = Space(100)
Dim wq As Long
Dim drm As Long
Dim ret As Long
Dim vi As Long
Dim tlkbuf As String
Dim FoundCRLF As String
Dim CleanString As String
Dim rcnt As Long
wq = viOpenDefaultRM(drm) 'Open Vi session
wq = viOpen(drm, "GPIB0::2::INSTR", VI_NULL, 5000, vi)
tlkbuf = "*IDN?"
ret = viWrite(vi, tlkbuf, Len(tlkbuf), rcnt)
ret = viRead(vi, lsnbuf, 100, rcnt)
FoundCRLF = InStr(lsnbuf, vbCrLf)
If FoundCRLF > 0 Then
CleanString = Mid(lsnbuf, 1, FoundCRLF - 1)
End If
Label1.Text = CleanString 'display IDN String

FRM-40509: ORACLE error: unable to UPDATE record.

FRM-40509: ORACLE error: unable to UPDATE record.
what can i do?

There will always be another error which tells you what the actual problem on the database is. Use the Display message key, or message out DBMS_ERROR_TEXT

FRM-40509: ORACLE error : Unable to update the record.

Hi,
I am having the following code in delete button.
declare
     v_button NUMBER;
begin
IF :CHNG_CNTRL_JOB_DTLS.SENT_DATE IS NULL THEN
               v_button := fn_display_warning_alert( 'Do you want to delete the version ?');
               IF ( v_button = alert_button1 )
                    THEN
                      message('before insert');
                      insert into chng_cntrl_job_dtls_log
                      select * from chng_cntrl_job_dtls
                      where job_name = :CHNG_CNTRL_JOB_DTLS.job_name
                      and job_version_no = :CHNG_CNTRL_JOB_DTLS.job_version_no
                      and sent_date is null;
                      message('before delete');
                      delete from CHNG_CNTRL_JOB_DTLS
                      where job_name = :CHNG_CNTRL_JOB_DTLS.job_name
                      and job_version_no = :CHNG_CNTRL_JOB_DTLS.job_version_no
                      and sent_date is null;
                      message('before commit');
                      silent_commit;
                      go_item('CHNG_CNTRL_JOB_DTLS.JOB_NAME');
                      P_DELETE_SET_PROPERTY;
                      clear_form;
               ELSIF ( v_button = alert_button2 )
                    THEN
                      null;
            END IF;
     ELSE
            p_display_alert('Version '||:CHNG_CNTRL_JOB_DTLS.JOB_VERSION_NO||' for the job name '||:CHNG_CNTRL_JOB_DTLS.JOB_NAME||' cannot be deleted.','I');
END IF;
     exception
          when others then
          message ('Exception in delete version button');
          end;when i am trying to save it says " *FRM-40509: ORACLE error : Unable to update the record*." .
i am getting message till before commit.
i am not able to check the error message in help as it is diabled in our form builder.
I have checked the privileges also. they are fine.
Please advice.
Edited by: Sudhir on Dec 7, 2010 12:26 PM

This error does not come from your procedure code, but from Forms itself. If you are in a database block, change something, and do a commit (either via a Forms key or in your own procedure), Forms commits the changes. For some reason this is not possible. You can see the database error via the Display Error key (often Shift-F1).
I see in the OP that this key is disabled. Change the on-error code then:
begin
   message(dbms_error_code||'-'||dbms_error_text);
   raise form_trigger_failure;
end;     Edited by: InoL on Dec 7, 2010 8:50 AM

HT201364 Unable to update to OS X Maverick from Snow Leopard 10.6.8.

Unable to update to OS X Maverick from Snow Leopard 10.6.8. I have 648GB available on my MAC HD but when I go to install I get error that I need 2 GB free and 8 GB available. Does the AppStore install some where other than the MAC Hard Drive on my imac?

The reference is to RAM. You need at least 2 GBs of memory installed.
OS X Mavericks: System Requirements

Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

Hello Smile_333
The article below will assist with finding things and help increase the hard drive space for your computer. The best way is to have an external hard drive to copy things to if you do not want to delete and loose things.
OS X Mountain Lion: Increase disk space
http://support.apple.com/kb/PH10677
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Lightroom catalog corrupt and unrepairable after migrating from LR4 to LR5. Can I send the compresse

My Lightroom catalog is corrupt and unrepairable after I migrated it from LR4 to LR5. The only way I can use this catalog is by copy/pasting/renaming it. Only after I do that, is Lightroom able to open the catalog. When I close LR and allow the catalog to be backed up, the LR informs me that the catalog is corrupt and it fails to repair it.
Can I compress the catalog and send directly to Adobe for inspection?
Thanks,
Tim

You can download thru the following page and use your serial number to activate it...
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

HT3702 My apple id unable to update and install the software from my iphone

My apple id unable to update and install the software from my iphone.I had checked the purchased history and found that my last payment had failed.I went to the bank to check my debit card status.But unable to found any problem from the bank.Had confirmed that my debit card have sufficient money to deduct.Pls help me as soon as possible ...
Thanks,
Jay Tan

When you select update, verify that it is showing your correct Apple ID, perhaps you have an app that was downloaded with a different ID, all apps are always associated with the ID that first downloaded them.

Tone curve not present on upgrade from LR4 to Lr5

In upgrading from LR4 to LR5 the tone curve in development catalog is gone

See also http://laurashoe.com/2013/10/01/when-panels-modules-tools-and-more-go-missing-in-lightroom /

Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud,

Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud, is that possible from LR5 to LR6? Thanks so much.

Welcome to Apple Discussions!
You can't install 9.2.1 or earlier on any Mac that is only Mac OS X bootable. In fact you need to use the restore disks which came with those Macs to install 9.2.2 on those Macs. 8.6 is only possible to install on Macs which came with 8.6 or earlier. The 9.1 disk may be useful for your 1999 PowerMac G4, but won't be of any use for a 2006 Powerbook G4.
Adobe Pagemill does not follow w3.org web publishing standards. If you want a webpage editor, get http://www.barebones.com/ BBEdit
MS Office, there is a free Mac OS X alternative in http://www.neooffice.org/
Or you can upgrade to the full Office 2004 for the Mac, or get http://www.thinkfree.com/ or Open OS X Office.
Wordperfect files can be converted to Word files with http://www.dataviz.com/ 's Maclinkplus.
Microsoft no longer has Internet Explorer for download (that quit being offered January 2006), though that is covered more in my FAQ:
http://www.macmaps.com/browser.html
As for other Mac OS X inquiries, I strongly recommend seeing my other FAQ:
http://www.macmaps.com/macosxnative.html
which should answer most of your other questions. If you have further questions, please feel free to ask me.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Upgraded from LR4 to LR5.7. Apparently successful download on iMac27" 5K running OS X10.2. Collections that were clear in LR4 appear badly blurred when opened in LR5.7. What's,wrong?

Upgraded from LR4 to LR5.7. Apparently successful download on iMac27" 5K running OS X10.2. Collections that were clear in LR4 appear badly blurred when opened in LR5.7. What's wrong?

Thanks, everyone, for your suggestions.
John: I back up the catalogue (and optimize/check its integrity) every time I quit Lightroom - which is why excluding it from Time Machine isn't the end of the world. I did rename the catalogue early on in my troubleshooting process - as you say, I didn't like the fact I felt out of control of it.
I tried synchronizing a folder that had some flags: when I'd done there were three flags in the folder. (I have unclicked - and clicked and then unclicked - the 'unsaved metadata' checkbox in View Options: as I say, Lightroom shouldn't be displaying these flags at all.)
Rob: Thanks for understanding why I'm fretting! I've checked my XMP sidecars, as you suggest, and they have read and write privileges. I then checked the last-modified date on the XMPs that came up with flags after I'd synchronized that folder. One of them displayed the time I'd just synchronized the folder (it's one I haven't worked on apart from applying a blanket preset in LR2, and then a blanket update to PV2012 in LR4, as I've done to all the images I haven't yet worked on individually); the other two showed the time (I presume) I worked on them yesterday. I selected these three and applied command-S: they then showed, correctly, that they'd been modified a minute before. So far, that folder's now flag-free. (As I said in my original post, the flags sometimes do seem to vanish if I save enough times - and they're unpredictable, not necessarily appearing on the same images in a collection or folder as before I do I group save/clear conflict.)
Mollysnoot: I don't see how the Mac OS would be doing this (although who knows - I'm not a software expert). I don't have any other programs open that can modify images. And since these flags can reappear instantly when I've dealt with the conflict - before I've had time to take a breath, even - I don't think they represent any actual modifications.

Error: Unable to Update Catalog while upgrading catalog from lr4 to lr5

Similar Messages

Maybe you are looking for