Error uninstalling Toshiba Speech System

I am in the process of upgrading to Windows 7 and as I'm trying to uninstall the Speech System, this error keeps popping up. Even when I try to uninstall through the control panel, what does this mean?
Error loading C:\PROGRA~1\COMMON~1\INSTAL~1\engine\6\INTEL3~1\Ctor.dll
The specified module could not be found.

Update for anyone else who might find themselves in this situation:
I uninstalled both and everything was fine.

Similar Messages

C++ Distributables and toshiba speech software !

I have a toshiba A660.
My question is for my expert collegues here, which toshiba software recquires C++ distributables? (86X ans 64X)
Do you need both 2008 and 2005?
Also which tosiba software recquires toshiba speech system applications?
Thanks a lot guys

Hi
Toshiba Speech System is voice-composition and speech-recognition software
This program allows you to turn speech and spoken words into text.
>Also which tosiba software recquires toshiba speech system applications?
Toshiba Speech System enables you to use voice commands in connection with various Windows software applications which recognize input from a microphone.
The system may also be used as a dictation tool.

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Uninstalling Toshiba Laptop Checkup & Security Dashboard?

Hello,
I have a new Satellite S855-S5268 and I'm uninstalling Norton so that I can install my AV of choice (Kaspersky Internet Security)
On the official Kaspersky forum and help files, it says that you have to uninstall Norton thoroughly in order for Kaspersky to work properly ("Norton remnants are often a source of problems when installing Kaspersky").
Four programs by Norton/Symantec came pre-installed with my computer:
* Norton Internet Security (I have already uninstalled this)
* Norton Anti-Theft (same)
* Toshiba Security Dashboard
* Toshiba Laptop Checkup
It's the last two that I have questions about. In Programs and Features, it shows that those two are NOT by Toshiba Corporation, but, rather, from Symantec Corporation. In fact, when I click on the Security Dashboard icon on my taskbar, what it does is it shows me a summary of the Norton products on my machine.
When I run a Get System Info report (GSI is a run-on-demand Kasperky tool) after having uninstalled NIS and Norton Anti-Theft, it still lists Toshiba Laptop Checkup and Toshiba Security Dashboard as "Possibly Incompatible Software" (NIS 2012 and Norton Anti-Theft were also listed here before I uninstalled them). See attached screencap
Can I uninstall Toshiba Laptop Checkup and Toshiba Security Dashboard and my computer will still work properly?
Thanks in advance!
Solved!
Go to Solution.
Attachments:
GSI screencap 2 incompatible programs.jpg ‏357 KB

Update for anyone else who might find themselves in this situation:
I uninstalled both and everything was fine.

H520s Error 1962 No operating system found

Hi, I have a Lenovo H520s, and two problems just appeared. First of all, it started to show "Start PXE over IPv4," then after waiting for a while "PXE-E18: Server response timeout. Start PXE over IPv6" would appear. A little bit later, the computer simply shows "Error 1962: No operating system found."
I went into the BIOS and I have Boot Mode set to "Auto" with UEFI first. I don't know where to go from here.
I recently used IOBit Uninstaller to uninstall all the software for my Epson WF-3540 scanner/printer and then reinstalled everything, and my only theory was that IOBit uninstaller deleted something that it should not have. This is probably the first time I have turned the computer off and on again since then.
Does anyone have any ideas? Thanks.

Dear rachitt_23
1. May I know what machine are you using?
2. Check whether Intel VT Technology is Enabled?
3. Even if the boot mode is set to Auto, check that it is configured to Legacy first.
Peter
ThinkPad W520 (4284-A99) | ThinkCentre E73 SFF (10AU-0040SG) | i9300 - CM11 / GoogyMax 2
Give kudos to reward people for their assistance | Mark the thread solved if the solution works | Direct e-mail regarding technical problems will be ignored
=====================================
Dolby ; IdeaPad Slate Tablet ; Equalizer APO

Error message with ThinkVantage System Update

When I run system update I am getting this message:
"An error was detected with the package catalog for your system on the System update Server. Please contact the Support Center."
My system is the E420s.
brassie

brassie,
This seems to be a common problem and has to do with the servers the updates are on, the thread here: System Update fails with "An error was detected with the package catalog for your system...
A few solutions are offered, sometimes the web server needs to be reset and sometimes an uninstall/reinstall of System Update does the trick.
Not sure the root cause of this issue, it seems to be something that the Lenovo folks are working on still.
Best Regards,
Ed
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

Error message "Live file system repair is not supported."

System won't boot. Directed to Disk Utility to repair but get error message "Live file system repair is not supported." Appreciate all help.
Thanks.
John

I recently ran into a similar issue with my Time Machine backup disk. After about 6 days of no backups - I had swapped the disk for my photo library for a media project; I reattached the Time Machine disk and attempted a backup.
Time Machine could not backup to the disk. Running Disk Utility and attempting to Repair the disk ended up returning the "Live file system repair is not supported" message.
After much experimentaion with disk analysis softwares, I came to the realization that the issue might be that the USB disk dock wasn't connected directly to the MacBook Pro - it was daisy-chained through a USB Hub.
Connecting the USB disk dock directly to the MBP and running Disk Utility appears to have resolved the issue. DU ran for about 6 hours and succesfully repaired the disk. Consequently, I have been able to use that Time Machine disk for subsequent backups.

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.

Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adil

This messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil

Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

Hi there,
I am getting the following error in SharePoint 2007 site.
Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
Show Error Details
Hide Error Details
[WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
Any help would be highly appreciated.
Thanks,
Puli
Puli Bala

It is not only because of unsafe controls. Please refer the articles below.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
Puli Bala

Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE

Hi All,
I am getting Error when i am viewing my salary slip in ESS.
The Error i am getting is :
Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE
So can anybody help me out in this.
Regards,
Dhruv Shah

Solved the Error by deleting the spool in the Backend.
Spool was overflow.
Regards,
Dhruv Shah

Stuck at "grey screen of death", disk I/O errors, Facility com.apple.system

Good morning everybody!
Yesterday, my MacBook Air revB crashed upon trying to open an mp4 video. I had to press and hold the power button until switch-off. After this, the machine wouldn't start in either normal or safe mode, but was stuck on the grey screen with the Apple logo and the spinning wheel. A start attempt in verbose mode revealed the error "[Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 6] [IOType Read]", occurring twice. After this, some normal startup posts appeared, but each after a very long time, and preceded by the name of my harddisk and "IO error". Therefore, the system hung doe to not being able to read from the disk what it wanted to read for start-up. I booted into single user mode and used the find command to search "com.apple.system.fs" from root. It was not found. I verified the find command by searching something else, and that was found. Now I renamed my User folder in single user mode and rebooted in verbose mode. The Facility com.apple.system.fs persisted, but afterwards the system booted normally, no chain of disk IO errors. I deleted the User folder that had been newly created due to renaming the old one, and changed the old one's name back to its original value. Afterwards, the system booted normally without any errors, including the "com.apple.system.fs" one. The S.M.A.R.T. status of the disk was and is "SMARTOK". In order to find this out, I opened the console, whereupon the system crashed again. Only after 20 min of 1 s-long windows of opportunity (when the beachball disappeared) was I able to force-quit the console by invoking alt-cmd-esc, and the system continued to respond normally. There are obviously corrupt log files producing the very same read errors that had originally caused the system to hang during boot. Does anybody now what is going on?
The best,

Hey there,
I reread your original post... The problem to me is that what you did to make it boot again doesn't make much sense. Nothing in your home directory prevents the system from booting.
You said that the system hung when you had Console open. Most of the log files shown there are in /var/log, /Library/Logs some are also in your User directory in ~/Library/Logs, you could try deleting everything inside...
Why renaming your home folder changed anything is a mystery to me. The only theory I have is general file system corruption that got repaired during one of those bootups due to an automated fsck. That or the system deleted and recreated invalid plist files.
Mac OS has important files in /Library and /System/Library. The ones in System belong to the System and are not supposed to be touched. The ones in /Library are open for Applications to add their own System-wide Configuration settings etc. The same structure exists in your home directory ~/Libary. Usually the most interesting areas in your home directory are ~/Library/Application Support and ~/Library/Preferences. However as I previously said nothing in your home directory would keep the system from booting. It would always go to the blue screen before the login screen would appear (even when you have auto login on).
Good luck!

RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6

Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rock

hi,
check the log file and let me the the error.
manish

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Error in local message system; message 009999000035 not complete

Hello All.
I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
and SAP_SV_FDB_NOTIF_BC_CREATE.
However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
I have also checked for Product_ID parameter which is not existing.
One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
So, this shows clearly that it is an issue with role/authorization.
Please suggest me !!
Thanks in advance.
Regards,
Satish.

Hmm not really. Profiles for the roles are also generated?
Those roles/profiles should be sufficient to create support messages.
Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04?

Error uninstalling Toshiba Speech System

Similar Messages

Maybe you are looking for