Error update firmware mega stick I

I recently got a Mega Stick I
After I installed the software, I found the update program.
I clicked on start update firmware,  but the update program faild, and couldn't finish.
Mega Stick now complety dead.
Help me please??
Windows 2000 and XP no found!!!!!! ( device USB unknow )
Download program repair???? where???
Cristian Infante

Sometimes it's better to read the entries here first, before posting *g*.
Solution is very easy. Remove battery from Mega-Stick. Connect to USB while holding the PLAY-Button. Windows will find now a device called like recoverybla. Install the driver from the original MSI-CD. Now you can do a upgrade with a new firmware ... And ... it works ...

Similar Messages

  • Error updating firmware for Ipod Classic 160

    Ive been trying to update my Ipod Classic 160 for a few days now for update 1.1.1. ive tried several times and the update will download but then i get the error messages. "Ipod cannot be updated at this time, Firmware corrupted".
    So what do i do now?

    With that one, the following document might be worth a try:
    What to do if iPod can't be updated because the firmware file was corrupt or not found

  • Mega Stick 128: Update Firmware The Says Locked

    I've got a Mega Stick 128, i got it about 2months ago, i can't return it coz it was a present from my aunty in malaysia and i live in australia. now i recently formated by mistake with the windows formatting program, now it says media error. I went to the MSI website and then updated my firmware on it with the program, it now says LOCKED on the LCD when i turn it on. this then shuts down, i've tried updating the firmware even with both versions. i really annoying, i can't find an answer for this can you?

    right lets keep this problem in this thread.
    You need to give MSI support 24-92 hours for email replies and maybe longer if support in your country is currently overworked. also please check you have got the right email address at MSI- you need Tech Support not Sales.

  • MEGA STICK 520 Firmware update?

    Hi, well I´been searching and reading this forum for quite some time and I haven´t found answers to this questions and I though that maybe someone did, so here it is:
    I own a MEGA STICK 520 and I found a firmware update MS5520v0.2.0_FW.zip (2005-8-17) but I want to know exactly what does it changes, so if someone did the update, what does it do? And did you have any problems installing it? because I´ve read too many threads about players dying or allmost.
    Is it the first firmware update? cause aparently for what i´ve read a lot of firmware with problems were solved with new versions.
    Thanks in advance,
    Bherno
    Ps: sorry for my english, i´m from argentina. and please don´t answer me "just do it man!", because it cost me a lot of money and i can´t afford to kill it. I have two good reasons for doing the update, it´s really annoying that the player starts reproducing an album in the middle when it is prefectly organiced (in fact if you go manually to the first track it will play perfectly fine), and that the volume increases exponentialy.

    The latest firmware feature is more little bug, thus please update the latest F/W (v0.2.0)!!
    Update items is as follows:
    1. Fixed bug: When manage “playlist” and power off, after power on “playlist” will be disorder.
    2. Fixed bug: The file name will be cut under “playlist” mode.
    3. Fixed bug: When didn’t use a long time, the screen wasn’t display.
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process:
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=605)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5520)
    3. Please press sustained “play key” first (While mega stick can't be recognized by PC please add this procedure), then plug your mega stick 520 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5520" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger. (While mega stick can't be recognized by PC please add this procedure)
    Please note: While mega player can't be recognized by PC, please don’t put battery with update firmware.
    Hope to solve your doubt!!

  • MSI Mega Stick 128MB Media Error

    I have a MSI Mega Stick 128MB and when i turn it on it comes up with "Media Error" - then turns off. Can anybody PLEASE help me?

    Please update latest firmware (v3.00.13) and try again!!
    Please according to firmware update procedure to do of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=485)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 128 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery before updating. (2) The step 3 is very important, please must press sustained “play key” first, then connect into your PC.

  • MSI MEGA Stick 256 MP3 Studio Error

    When I try to install MP3 Studio off the CD that came with my megastick, it gives me an error and tells me files are missing. If I check manually, I can confirm that this is the case.

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • Mega stick firmware problem

    i had the mega stick 511 with the firmware version 2 and i updated it to version 3 and it stop working. now when i plug it into the pc it won't even detect it or recognize it to undo the updated version 3. what can i do so it will detect it, once it detected it as smp3 device but when i tried to undo the updated version it appeared an error window. what can i do?!?!?!

    FINALLY, THE SOLUTION
    I have a brand new Megastick 511 USB 2.0 without FM, and I could get version 3.x firmware update done.
    My PC config is...
    ABit KV8 Pro Motherboard,
    512MB kingston RAM,
    Athlon64 2800+,
    OS Win XP SP2 with every single update released,
    but frankly, I don't believe this problem has anything to do with machine configuration, USB or OS issues. It's merely a question of doing the right thing. Of course, I'm assuming your USB is really 2.0 and you downloaded the right firmware and unzipped it to the MS-5511 folder, as stated in the manual.
    Ok, folks. After having this very same problem for a few days, I finally figured it out. Yeah, I wanted this playlist feature this bad, and it's worth the price.
    Problems were...
    1- Device was not recognized as a USB 2.0 device, no matter the USB motherboard drivers were installed;
    2- As soon version 3.x firmware updates were done, I got the old 'deadbrick' effect - oh, yeah, no lights or sounds out of the brand new player - which could be reversed with the old firmware, the one supplied with the CD.
    What I did to have the playlist feature was...
    1- Took the battery OUT;
    2- Using the cable supplied, I pressed and held the play/pause button and kept it pressed until procedure was completed;
    3- Inserted the cable in a USB;
    4- Windows showed the old 'hey, this device could be faster, blah, blah' message - just ignore it, as I did!
    5- Go to the MSI MS511 MEGA STICK Update program;
    6- This is very important... at this point, it would be nice if the software could recognize the device, but IT DOESN'T! You will get a message saying 'Media state not started' or something like this after quite a while waiting. This mean it won't show your current firmware version! Once again, ignore it!
    7- Well, since the 'start' button was there, I clicked on it, AND I WAS AMAZED TO SEE THE UPDATE BEING DONE! Ok, I didn't wanted to format the device, as it was full of good music, but even unchecking the format option, the software keep saying this had to be done in order to upgrade the firmware - a fair price;
    8- As all the copying and writing and verifying processes were done, I knew procedure was over, as the new 3.x firmware version was showing, and I could finally copy more tunes into my 511-now-with-playlist device! Only at this point I released the play/pause button.
    Now, when I connect the 511 to the PC, Windows continues saying the device could be faster, but the Update software recognizes it immediatly! And for 512MB of stuff, it takes around 12min to transfer - as it did before - just in case you wanted to know.
    Enjoy, my friends!

  • Msi mega stick 1 128 error flash

    I had update my bios mega stick but I had occured an error.
    now when I connect the stick in usb port the pc wrote "usb not supported" the display is off.
    help me please

    no. it's said "usb unrecognized".

  • Mega Stick - 122 MB free after update

    I've updated Mega Stick firmware from 2.01 to 2.04 (using newest drivers from site) under WinXP and everything went well ... except that after updating and formating I had 122 of 128 MB free (and there were no files on it, except settings.dat). Is this how it should be?
    One more thing, I'm using it with NiMh batteries (800mAh), but they won't last long because MS1 thinks that Alkaline battery voltage is too low (and it isn't, it's normal voltage for NiMh, and MS1 works just fine on that voltage)... I guess that it could be solved in firmware, with option to select Alkaline or NiMh batteries.

    Quote
    Originally posted by optiplex
    I guess 128Mb is actually 122MB in real life.
    No, it says (Main menu/About) 128MB total, 122MB free.
    Quote
    And we have to also consider the space that’s allocated for the FAT
    Yes, that crossed my mind later. I just thought it would take less space.
    Quote
    I think the software is in some separate EPROM chip or some sort of a programmable chip like a micro controller rather than on the Flash memory it self, but who knows I could be wrong.
    That's a good point, maybe it is on a flash ...
    Anyway, thanks for the answers. At least I know I'm not the only one with 122MB ...

  • Mega stick 528 firmware problem

    i have updated my 528 to .16 f/w, and now only recognizes 290 songs. I´ve tried returning to the .13 f/w but i can´t. i´ve tried with the old driver 1.548 but the same.
    Anybody knows what to do???

    http://www.msi.com.tw/program/support/firmware/frm/spt_frm_ia_detail.php?UID=615
    did you use the correct firmware file for your MegaStick 528, as there are two different variations?
    Quote
    MEGA STICK 528 firmware updating process: (Don't put battery)
    1. Please download and install MEGA STICK 528 firmware and driver
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5528)
    3. Please slide the "Power" switch and keep holding first, then plug your MEGA STICK 528 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5528" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Note1: Don't put on battery while updating firmware.
    Note2: The step 3 is very importance, please must slide the "Power" switch and keep holding first, then connect to your PC.
    Note3: Please must select "format data area" with update firmware
    Note4: This firmware can only use v1.670 driver version, please go to our website to download it.
    Note5: Please make sure your firmware version first before updating. If your firmware version is originally v1.00.xx, you have to use this edition.

  • Everytime I update Firmware it errors and I have to restore.

    This is getting so **** frustrating. I love my iPhone but I HATE iTunes so much. I go to upgrade firmware and then it errors, then the phone is stuck in recovery mode. So I have to restore and upgrade then reload ALL of my music, apps, and contacts. This takes HOURS!!! And also none of my stuff will be in the right order it was.
    What am I doing wrong here? It's not jailbroken or anything goofy like that.

    I've just gotten so used to it that I make sure to back up my phone before hand, because I know its going to crash and burn. It's just depressing to have to waste about 2-3 hours updating firmware on the darn thing.
    This is the only thing I can think of though, when I used to have the old iPhone I had it jailbroken. But when the new iPhone came out there was no need anymore because the app store keeps me happy. I loaded my old profile onto the new phone though. (Contacts, appointments, music) I am wondering id that's the reason its acting weird.
    I could start a whole new phone but I would have to write out all my contact info and everything. Seems like a hassle.
    That's it though, same thing for you?

  • When trying to update firmware on nano 3rd gen i get error -23

    What is error -23 i can't seam to find anything about this... its really anoying as my ipod wont update firmware or restore... have tried deleting itunes and reinstalling etc.. even attempted on a different pc without itunes installed, IE installed itunes but still same error when trying to update to new firmware.... could someone please help me with this anoying issue.
    Cheers

    I just tried redownloading from itunes and installing and I got a messages saying installation was successful, but then right after that I got the following error message:  iTunes was not installed correctly.  Please reinstall iTunes  Error 7 (Windows error 127)
    Any thoughts?

  • Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful

    Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful it.Please help mee!!

    You can try putting the iPhone into DFU mode and see if that will let you restore and remove the jailbreak:
    http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
    Some jailbreaks cannot be removed and in some cases will permanently disable your iPhone. If that happens to you, then you will have to buy a new iPhone; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPhone.
    You're on your own from here. We can provide no further help with a jailbroken iPhone in these forums.
    Good luck.

  • Satellite Pro A200 (PSAE4E) Disc Creator error while firmware update

    Hi
    I get the following errors when trying to update firmware for Disc Creator i am using Windows VIsta Home Premium,
    Unexpected error occurred.
    Error Code: 32007C-26-00000015
    Followed by:
    Error Code: 320129-26-00000015 - then application crashes.
    Any solutions to this
    Thanks

    Hi,
    A client of mine was getting this on his laptop when he had an encrypted USB thumbdrive plugged in.
    If the thumbdrive was disconnected the error went away.
    I'm guessing the application is querying all drive letters and perhaps erroring when it can't read the contents of the drive or it doesn't understand the file system.
    Try disconnecting any attached devices (inc. printers with card readers) and see if the problem goes away.
    HTH
    Calogero

  • NSS6000 "Firmware Update Error: The firmware image file is corrupt."

    Hello All,
    I've recently run into a problem trying to update the firmware on our NSS6000 to either 1.20.1 or 1.21.0.  We are currently running 1.16-3.
    Each time after I click "Upgrade Firmware", the upgrade fails with the same error:  "Firmware Update Error: The firmware image file is corrupt.  Obtain another copy of the file and try the firmware upgrade again".
    I've tried re-downloading the NSS6000_FW_1.20.1.tar.gz and NSS6000_FW_1.21.0.tar.gz several times from multiple PCs, and using multiple browsers.  I've tried several combinations of Windows Server 2003R2, Windows Server 2008R2, Windows 7, and Firefox, Chrome, and IE 8/9.
    The downloads all appear to be fine, and they all can open/extract with 7-zip without issue.  The file sizes are always the same.
    No combination of OS/Browser yields a different result on the upgrade attempt either.
    I tried renaming NSS6000_FW_1.21.0.tar.gz to NSS6000_fwupgrade_0121.tar.gz to match the convention used in early versions (thinking that the extra "."'s could be the issue) but no luck either.
    I was able to successfully re-apply the NSS6000_fwupgrade_0116.tar.gz firmware without any issues at all.
    A strange thing I noticed, though, was on the "The system will reboot now. Please close your browser." window, it shows the device as an "NSS2000 2-Bay Gigabit Network Storage System" (please see attached screenshot).  I'm chalking that up to a simple reusing-the-same-web-code issue rather than the root of the problem, but thought I should mention that as well.
    Has anyone else run into this issue, or have any suggestions for workarounds in order to successfully upgrade the FW on this device?  Thanks in advance for any suggestions.

    Hi,
    Not sure what is going on i haven't see the issue you are having, can you try downloading both images at a different location; instead of behind your router. Also upgrade to .20 and then .21. Im pasting the release notes upgrades step.
    When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
    v1.21.0 the Configuration GUI displays a "Programming images.." message
    for more than 12 minutes (the time it takes to upgrade the firmware is
    usually 5 to 10 minutes).
    The workaround is to wait at least 15 minutes to complete the upgrade and
    then power cycle the NSS by removing the power cord. Do not try and
    access the Configuration GUI during this time. (CSCsx17923) When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
    v1.21.0 the Configuration GUI displays a "Programming images.." message
    for more than 12 minutes (the time it takes to upgrade the firmware is
    usually 5 to 10 minutes).
    The workaround is to wait at least 15 minutes to complete the upgrade and
    then power cycle the NSS by removing the power cord. Do not try and
    access the Configuration GUI during this time. (CSCsx17923)
    If this don't help you might have to give us a call @ 1-866-606-1866 and open a support case.
    Thanks,
    Jasbryan
    Cisco Support Engineer

Maybe you are looking for