Error update ios waas

i have a problem, this is the log.
log:
image: Input/output error
Image was NOT written to flash. (err=0)
installer[1]: segfault at b6418004 eip b7f18d10 esp bfb3e0d0 error 4
installer[1]: segfault at b6418004 eip b7f18d10 esp bfb3e0d0 error 4

Hi Juan,
It looks like the flash is bad. You may want to open a TAC case to RMA the WAE.
Regards.

Similar Messages

  • Error Update IOS router 7600

    Hi Guys,
    I've trying updating a 7609 cisco router, my actual image that is working is "c7600s72033-advipservices-mz.122-33.SRB5" and I would like to update to "c7600s72033-adventerprisek9-mz.122-33.SRC2". I've followed all the steps to update but when I've reloaded the router happen the error below:
    System Bootstrap, Version 8.4(2) Release
    Copyright (c) 1994-2005 by cisco Systems, Inc.
    Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
    Autoboot executing command: "boot disk0:c7600s72033-adventerprisek9-mz.122-33.SRC2.bin"
    Loading image, please wait ...
    open: file "c7200-atafslib-m" not found
    monlib.open(): Open Error = -1
    loadprog: error - on file open
    cannot load the monitor library "disk0:%c7200-atafslib-m" from device: PCMCIA Disk 0loadprog: error - on file open
    boot: cannot load "disk0:c7600s72033-adventerprisek9-mz.122-33.SRC2.bin"
    Exit at the end of BOOT string
    rommon 1 >
    The error in red I think that is the problem, How could I solve this problem?
    Thanks Guys

    open: file "c7200-atafslib-m" not found
    I think this is a monitor file.  Post the output to the command "dir disk0".  
    cannot load the monitor library "disk0:%c7200-atafslib-m" from device: PCMCIA Disk 0loadprog: error - on file open
    boot: cannot load "disk0:c7600s72033-adventerprisek9-mz.122-33.SRC2.bin"
    This error message is saying that the router cannot see the PCMCIA card or the PCMCIA card currently installed cannot be detected by the line card.
    You can't load the monitor library file because the boot variable string is incorrect.  Look at the highlighted (in RED) above.  The boot variable string found in the configuration has a space, the symbol "%", between the location (or "disk0:") and the filename.  

  • My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

    my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

    UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

  • Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

    Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

    Hi the_mad_movies,
    It seems like this article will be the best option for addressing this issue:
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    http://support.apple.com/kb/ts4451
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • I have never updated ios on my iPhone 4.  I am currently running ios 4.  I tried to update yesterday to ios 6 but many hours into the backup I got an error message saying that continuing would cause all of my phone contents to be lost. What should I do?

    I have never updated ios on my iPhone 4.  I am currently running ios 4.  I tried to update yesterday to ios 6 but many hours into the backup I got an error message saying that continuing would cause all of my phone contents to be lost. What should I do?

    Why, if it told you you have insufficient space on your computer, would it suggest making more space available on your phone?
    At a guess, you have insufficient space on your phone. Installing software will typically require more space than the final size of the software, perhaps even twice or three times as much, for the installation process. You can easily dump some videos or music temporarily, and then synch them back in afterwards.

  • I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS

    I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.

    we have a same problem

  • I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

    I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

    The 2nd generation can not be upgraded beyond 4.2.1.

  • Iphone 4s - try to install latest update ios 7.1.2 - unable to install update - an error occured when installing 7.1.2

    iphone 4s - trying to install latest update ios 7.1.2 - takes long time to verify and then i get unable to install update - an error occured when installing 7.1.2?
    how do I install?

    First it would help if you identified the error. That might assist you in knowing what to do next. See this support document for help with error codes when unable to update or restore the iPhone. Resolve iOS update and restore errors
    Then you can also see this support document for trouble with updating the device. If you can't update or restore your iOS device

  • HT201210 i can't restore and update ios 4.2 in my ipod touch,iTunes displays a message saying"an unknown error occurred (-1)".

    i can't restore and update ios 4.2 in my ipod touch,iTunes displays a message saying"an unknown error occurred (-1)".

    iOS: Resolving update and restore alert messages  <--- including error -50

  • HT1222 When I am download the new update IOS 6.0.1 it's give me error that download is falid

    When i am download the new update IOS 6.0.1 it's give me error that download is falid

    Are you on WiFi?  Try connecting your iPhone to your computer and updating through iTunes.

  • Error -42032 while connecting iPad2 to Windows PC / iTunes 10.5.0.142 to update iOS 5

    Error -42032 while connecting iPad2 to Windows PC / iTunes 10.5.0.142 to update iOS 5. After downloading iOS 5 I'll get error -3259 and the updateprocess of my iPad2 don't starts.

    I guess I should also note that sometimes it just crashes... just because.
    So, get to fixin'.
    No, seriously, fix it.

  • I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?

    I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?

    The error 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions

  • Configurator is 'Unable to Update iOS". Error 11 (Preflight options copy fail)

    I'm attempting to restore 720 iPads to factory settings, and place a Configurator profile on them.
    I'm using a Bretford Cart that holds up to 30.
    Everytime I run configurator, it's unable to update iOS, and it specifically says that It "failed to copy preflight options during recovery mode restore. Error 11."
    Half of them work, and are done correctly, and the other half give the error.
    Some of the iPads are on iOS 5, I'm sure, considering the amount of iPads that I'm dealing with. Could this be the issue?
    What am I doing wrong?

    It's been a while, but I think I had to finally completely reset all of them to factory settings, and run them through the entire system again.
    It could be the cart (and configurator) having a problem applying settings to multiple OS installs. I'd put my money on this being the issue.

  • Error updating to ios 5.1.1 iphone 4

    Hey guys
    Error updating to ios 5.1.1 iphone 4 any solution please ?

    http://support.apple.com/kb/TS3694#error3194. There is no iTunes 5. The current version is 10.5.1.

  • HT4623 updating iOS 6 from iOS 5 and i get unkonwn error

    My daughters iPhone 4 is displaying a connect to iTunes after trying to update the phone to iOS 6

    Error 3194, AKA "This device is not eligible.. occurs for several reasons:
    1.  Update to the latest iTunes - currently 10.4.1.
    2.  Disable ALL security apps (firewall, antivirus/spyware) running on your computer.  Additional measures may be needed.
    3.  You may need to edit the Hosts file on your computer to remove references to gs.apple.com if you EVER used hacking techniqus or apps such as tinyumbrella.
    4. Don't try to downgrade the iOS.
    5.  If the phone was EVER successfully hacked in the past (jailbreak, downgrade, unauthourized unlock) there may be nothing you can do now to fix this.
    "This device is not eligible for the requested build: Also sometimes displayed as an error 3194. If you receive this error, update to the latest version of iTunes. 3rd party security software or router security settings can also cause this issue, to resolve please follow Troubleshooting security software issues. Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see  iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod; follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store.  Also, using an older or modified .ipsw file can cause this error. Try restoring moving the current .ipsw file aside, or try restoring in a new user to ensure that iTunes downloads a new .ipsw."
    http://support.apple.com/kb/TS3694

Maybe you are looking for

  • Can I partition a drive in Disk Utility without erasing files?

    Hello, According to the third screenshot, I have the option of partitioning an external drive without losing files already on it, but when I try to do so, I only get a message indicating that it will erase the disk:  http://osxdaily.com/2009/11/20/re

  • E65 3rd party apps not showing in installation sec...

    Just updated the firmware on my E65. Have installed some apps (HandyProfile, HandyAlarm, etc.) and they are listed as installed by the application manager but are not showing up in the Installation section. Any ideas?

  • Desktop backup question

    When I use the desktop program to back up my world edition blackbery ... i get the gfollowing message: "error backing up data base browser data cache 0 of 29 entries retreivable." io have no idea what that means. is my stuff being backed yup or not d

  • How to transform to custom xml format

    Hi all, I already transform my flat file to xml using xquery transformation, the result is shown below : <investment> <member>001</member> </investment> now I need to change the format like this : <Message name="investment"> <Field name="member">001<

  • Error message 4261 when trying to burn discs

    Arghh, this is driving me mad. Since I updated to Itunes 11, I have been unable to burn playlists to disc. I'm a teacher and need to do this a lot for my work. I've wasted about 20 blank CDs as they start burning, then after a few tracks I get the me