Error - Update Product Data in Solution Manager

Hello,
We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
Error : Update Product Data in Solution Manager
Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
Any information is highly appreciated. Thank you.

Hi Jaypee,
Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
Extract from this guide for this problem:
Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
Thanks
Sunny

Similar Messages

Production SLD in solution manager

Hi,
I have small doubt regarding SLD (System Landscape Directory) in Solution Manager.
We have an Production SLD in Solution Manager dual stack system, and our Production System (Portals, BI, ERP, PI) was configured to Production SLD in Solution Manger.
We are planning to apply patches for our live production Solution Manager System, I know that SLD will stop while doing the Patches on Solution Manager and this will make our production systems stop working.
Therefore I need to know the correct way around this to allow us to patches for our Solution Manager system.
Thanks and Regards
Pavan Morishetty.

Joshi,
Thanks for your quick reply.
But in our company we don't want to change our Production SLD from Solman system to any other System (eg. PI, Portal).
If you any other suggestion please update me for applying the patches in Solman System.
Thanks and Regards
Pavan

Error with CTC users at Solution Manager 7.1

Error during Inital Setup at Solution Manager 7.1
hello SAP Experts,
I have an error during the Initial setup Solution manager 7.1 SPS3.
I get it at SAP Solution Manager Configuration: System Preparation step 6.1 'Select SLD'.
I filled host, port and password, status of SLD server is green, then I clicked button 'Configure SLD Data Supplier...' I have get new window, to fill in passwords and options.
[SLD users|http://pokazywarka.pl/63hxan/] [SM2CTC & CTC2SM users|http://pokazywarka.pl/mcpakj/] (I logged into the system as a user SOLMAN_ADMIN, SLDDSUSER and SLDAPIUSER).
After I click button 'next' an error occurred:
Error: Execution of Function AGS_SISE_SET_CTC_STATUS ends with an error (message ID: 341, message number: No RFC authorization for function module AGS_SISE_SET_CTC_STATUS.:RFC_NO_AUTHORITY, message text: ).
I have performed tx.Solman_setup as SOLMAN_ADMIN user.
All steps before the an error are finished sucessfully.
I looking for information at Google and SAP notes but can not find anything.
Please send any advices,
Best regards
SAPFan

Hello,
Please check my last reply to this very same issue in message:
RFC No Authority error
Best regards,
Guilherme

How to remove Production System from Solution manager.

Hi All,
We have Three system landscape and solution manager installed.
All the system are managed by Solution manager.
here we are looking to remove the Production System from Solution manager.
as in case if is there any problem in solution manager then we are not dependent on it.
things will work directly on Production system.
Could you please let us know the procedure to remove the system from solution manager.
Please let us know if is there any document provided by SAP.

Hi,
Have you implemented charm,ccms monitoring or any other functionalities?
if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
Does your production system data coming from SLD?
if yes, Delete the entry from SLD
if both the answer is no.
1.delete RFC from SOLMAN to the production systems.
2. delete the production system using SMT2 transaction.
3. Remove system rom SMSY from SOLMAN.
Thanks,
Jansi

ERROR: Update driver data failed (Cannot install any apps)

Error Code Summary
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: Updating driver data failed. Driver entry was notadded. ARP estimated size 0KB
Every time I try to install any form of apps this error pops up.
I’ve un-installed my entire suite due to the fact the desktop application wouldn’t let me update anything, as it claimed nothing was installed. Even when everything was installed.
So, at this point. I’m just sitting here, paying for something I can’t use, with a client waiting for the final product.
I’d appreciate any help I could get.
Thanks.
P.S. Yes, I restarted my system multiple times, used the Creative Cloud cleaner application to clean things up, and every one of the basic troubleshoot methods.

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

Error in RFC SM_DM1CLNT800_BACK to Solution Manager System Message no. STMWFLOW025

Hi,
I am facing an issue in our Test landscape. One of our team member uninstalled solman system which was connected to all other system. CHarms was partly configured in it, so other technical team used to reach to solman for creating TR# and also release the TR from Solman. Now that the system was removed abruptly we are facing this issue and I have checked few things as below:
1) Checked for domain link entries in STMS and TP profile file, could not find anything. Nor there is any option to delete domain link as there is for create
2) Checked the RFC its was working as new Solman with the same host name and other details has been brought back with out any settings yet in it.
3) I deleted the RFC SM_DM1CLNT800_BACK in the managed system and had a backup copy created before deleting it. But still get the error "Error in RFC SM_DM1CLNT800_BACK to Solution Manager System" in more help I see this Message no. STMWFLOW025
4) Message no. STMWFLOW025 - It gives me an indication that this is something to do with the domain link and the Workflow of the TMS.
5) Checked BCOS_CUST table and it has an entry for this RFC. - Should I be removing this entry and will this resolve the issue?
I need help in resolving this issue and also if one of you could share a blog for the proper configuration removal process of a managed system from Charms and ITSM I think it would be very helpful. I could only find process and step towards configuration and not how to unconfigure the system.
Thanks in advance
Ashish

Hi
The issue is now resolved, this is how I did it.
1) Removed entries from BCOS_CUST from client 000 for OSS_MSG which was pointing to the RFC name
Then got another error:
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
2a) Ran the report in SA38 TMW_CONTROL_PROJECT_LOCK with selection for Deactivate the "project lock functionality".
2) Filled the "Deactivate Project Lock" field with "X" then clicked EXECUTE.
Problem got Solved.
Thanks
Ashish

Error while trying to export data from Solution Manager 3.1

Hello, when trying to export a project via SOLAR_MIGRATION in Solution Manager 3.1, I get the following error when trying to release the transport:
COMMUNICATION_FAILURE for RFC call SCMS_CONT_EXPORT (destination SAPKPROTP): / RfcExecProg: SAP0451.
Error in calling KPro transport server
Has anyone experienced this or have an idea how to reslove it? I opened a message through OSS and received this feedback:
sapkprotp is not available for AS/400.
In your case, sapkprotp must be started on the SAP Content Server.
sapkprotp must then be started via a SAP Gateway connection.
Please change the RFC destination of SAPKPROTP so that
the program must be started on your SAP Gateway on the content server
computer.
We currently don't have a Content Server and I would like to be able to export this project without having to install a new application on a Windows server. I would appreciate any insight you may have into this. Thank you.
~TJ

If you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian

ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeem

Hi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok

Error in installation of Sap Solution Manager - AIX / Oracle

Hello,
We are installing SAP Solution Manager in Operating System is AIX 5.3 and Database System is Oracle 10.2
After the Oracle Installation, in the phase of Abap Import (16 of 44), we are
receiving the follow error message:
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
ERROR 2007-04-12 15:27:41
CJS-30022 Program 'Migration Monitor' exits with error code 2. For
details see log file(s) import_monitor.java.log, import_monitor.log.

The installation export DVD was copied to local machine (the directory
list is attached in zip file). We get this DVD from
service.sap.com/swdc.
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20061222 (ifix 113727: SR7 + 112603) (JIT enabled: jitc))
IMPORT_MONITOR.JAVA shows this message:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20061222 (JIT enabled)
J9VM - 20061220_10521_BHdSMr
JIT - 20061026_1805_r8
GC - 200612_20)
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
And the directory is OK
/oracle/install/51032524
ls -l
total 160
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.ASC
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.EBC
-rwxrwxrwx 1 root system 9093 Apr 12 09:54 COPY_TM.HTM
-rwxrwxrwx 1 root system 5787 Apr 12 09:54 COPY_TM.TXT
-rwxrwxrwx 1 root system 8559 Apr 12 09:54 CRCFILE.DAT
drwxrwxrwx 4 root system 256 Apr 12 10:03 EXP1
drwxrwxrwx 4 root system 256 Apr 12 10:11 EXP2
drwxrwxrwx 4 root system 256 Apr 12 10:14 EXP3
drwxrwxrwx 4 root system 256 Apr 12 10:16 EXP4
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.ASC
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.EBC
-rwxrwxrwx 1 root system 20 Apr 12 09:54 LABELIDX.ASC
-rwxrwxrwx 1 root system 22361 Apr 12 09:54 SHAFILE.DAT
-rwxrwxrwx 1 root system 22 Apr 12 09:54 VERSION.ASC
Please, anybody have any idea?
Thanks for help,
Carlos Nogueira

Hi Carlos, can you resolve this ? because i have the same problem, but with sql and win 2003.
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) Client VM (build 1.4.2_15-b02, mixed mode)
Required system resources are missing or not available:
Import directory sapinst\saptrans\D51032007\EXP1' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP2' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP3' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP4' does not exist.
thanks in avance.

Error with Maintenance Optimizer in Solution Manager 4.0

Hi, I am configuring Solution Manager for download SP, I check marketplace and download the guide, when I try to download a SP following message show me:
"Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM)."
I go to sm59, verify RFC SAP-OSS with correct data, I found at guide following Host :
/H/54.16.44.50/S/sapdp99/H/54.62.200.35/S/
When I try press Connection Test Buttom I can not connect to SAP.
Do you know which can be my error? .....
Regards.

Hi,
Following the note 1024932
Steps to do before configre the maintance optimizer you need to configure sattilite systems in solution manager.
go to SMSY and configre R\3 systems.For these systems you need to create RFC connections and Logical comp.
http://service.sap.com/rkt-solman
for tutors and PDFs how to set up MOPZ.
Points if it helpfull
Regards
Neni

Error at phase 25 of Solution Manager 7.1

Hello all,
Am installing Solution Manager 7.1 on RHEL 5.0. Database is orage 11g
Iam facing an error at phase 25 i.e.
"An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance SM1/DVEBMGS00 ABAP: UNKNOWN did not start after 5:30 minutes. Giving up.)."
The contents of sapinst.log are,
ERROR 2011-09-13 09:19:55.750
CJS-30087 Instance SM1/DVEBMGS00 [ABAP: UNKNOWN] did not stop after 5:10 minutes. Giving up.
ERROR 2011-09-13 09:19:56.587
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|3|0|start was executed with status ERROR ( Last error reported by the step :Instance SM1/DVEBMGS00 [ABAP: UNKNOWN] did not stop after 5:10 minutes. Giving up.).
INFO 2011-09-13 09:19:57.812
Creating file /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS/__instana_tmp.xml.
PLease suggest me....
Thank You,
Regards,
Hasan

Hello Rajesh,
1.The swap partition is 20 GB
2.dev_disp log
MBUF component DOWN
DpHalt: cleanup EM
DpHalt: cleanup event management
Wed Sep 14 03:13:00 2011
DpHalt: cleanup shared memory/semaphores
DpCleanupSharedResources: removing request queue
***LOG Q05=> DpHalt, DpHalt ( 25857) [dpxxdisp.c   11230]
DpHalt: *** shutdown completed - server stopped ***
3.dev_w0 log
B Wp Hdl ConName          ConId     ConState     TX BC HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost
Program
B 000 000 R/3              000000000 INACTIVE     NO NO NO YES NO NO 000 255 255 20110914 024314 sapnw02
C Disconnecting from connection 0 ...
C Closing user session (con=0, svc=16ef73b8, usr=16f39d40)
C Detaching from DB Server (con=0,svchp=16ef73b8,srvhp=16efa328)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=118, com_tx=21)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 25891) [dpuxtool.c   327]
4.dev_rd log
DpCommAttachTable: attached comm table (header=2adeb293f670/ft=2adeb293f678)
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
Wed Sep 14 02:43:20 2011
GwDpInit: attached to gw_adm at 2adeb29cc160
Wed Sep 14 03:12:48 2011
GwISigint: received SIGINT (2), start shutdown phase
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c     12940]
Regards,
Hasan

Error at "CAF" phase of Solution Manager 4.0 SR3 installation

Hello,
When we install Solution Manager SR3 at phase 57 of 59, we get an error when sapinst configures "use type as java" CAF configuration parameters.
Line: -
ERROR
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
Line: -
1. sapinst.log :
ConfigMainExt state500
TYPE=A
STATE=500
INFO_SHORT=Error connecting to --http://yanbalsm:50000/ctc/ -- ConfigServlet?param=com.sap.ctc.util.OfflineConfig;PROPSHEETVALUE;CONFIGURATION=
apps/sap.com/caf~runtime~ear/appcfg/application.global.properties,KEY=WAS_MACHIN
E_ADDRESS,VALUE=yanbalsm. The provided user data might be incorrect or user migh
t be locked.
CONFIGURATION=
ERROR 2008-02-23 18:30:52.811
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile
java.log: 'JSE '.
ERROR 2008-02-23 18:30:52.812
FCO-00011 The step configCAFPropSheet with step key |NW_Onehost|ind|ind|ind|ind
|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Conf
iguration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAFProp
Sheet was executed with status ERROR .
Line: -
the usser JSE means for J2ee_admin or other? . i looged into abap stack 001 with sap* and validate that that user is not blocked.
Line: -
2. java.log
TYPE=A
STATE=500
INFO_SHORT=Error connecting to --http://yanbalsm:50000/ctc/
-- ConfigServlet?param=com.sap.ctc.util.OfflineConfig;PROPSHEETVALUE;CONFIGURATION=
apps/sap.com/cafruntimeear/appcfg/application.global.properties,KEY=WAS_MACHIN
E_ADDRESS,VALUE=yanbalsm. The provided user data might be incorrect or user migh
t be locked.
CONFIGURATION=
Line: -
I look into http:// hostanme:port/nwa and users are ok and come from abap stack.
but when try to uses config tool or VA with de sidadm user none load , i got a error message "JAVA_HOME" not set.
i look into .j2eeenv file and is set with setenv.
Line: -
3. sapinst_dev.log .-
TRACE      2008-02-24 00:02:56.72 [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: '
JSE '.
ERROR      2008-02-24 00:02:56.72
           CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile
java.log: 'JSE '.
Line: -
could any one please tell me what can i check to solve this and finish my installation process.
Thank,
Daniel

Hi
We have the same problem but in AIX/Oracle
Any suggestions?

Error when trying to launch solution manager

Good morning all...
I am having trouble when I attempt to access the solution manager. When I am at the main screen for SM (the one with the horizontal display of the projects, early watch report number, system monitoring number, etc.), and double click any of the projects, early watch reports, system monitoring, etc. I get the following dump:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Except.                CX_SY_REF_IS_INITIAL
Date and Time          06.10.2006 08:34:03
Short text
     Zugriff über 'NULL' Objektreferenz nicht möglich.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
      caught in
     procedure "SET_SESSION_BUFFER" "(METHOD)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     Es wurde versucht mit einer 'NULL' Objektreferenz (zeigt auf 'nichts')
     auf eine Komponente zuzugreifen.
     Eine Objektreferenz muß auf ein Objekt (eine Instanz einer Klasse)
     zeigen, bevor man sie zum Zugriff auf Komponenten nutzen kann.
     Entweder die Referenz wurde noch nie gesetzt, oder sie wurde mit
     einer CLEAR Anweisung auf 'NULL' gesetzt.
Missing RAISING Clause in Interface
     Program                                 CL_DSWP_CI_SESSION_DB=========CP
     Include                                 CL_DSWP_CI_SESSION_DB=========CM00A
     Row                                     1
     Module type                             (METHOD)
     Module Name                             SET_SESSION_BUFFER
I have searched OSS and SDN, but don't find anything related to this class.
Any help is appreciated!

Hi Joseph,
check out note 963354, it's a new one as of yesterday
Regards,
Pascal
PS: don't forget to assign points

SAP, VBScript, import data to solution manager

Hi,
I'm trying to import to Solution Manager a testset-structure (from Excel, but Excel is no problem)
I could not find out, how to allocate in SOLAR01/02 a folder structure, testpackages and last but not least testcases, I did not even succeed to explore the existing GuiTrees,
somebody has experience, eventually examples?
thanks in advance
Istvan

Hi,
Thanks again.
Now i am able to send the session data. As you have mentioned i have created a new sevice session in DSWP and run refresh session and that has created the job sap earlywatch alert for solution manager.
But I am facing an error when generating the report. The background job is getting cancelled.
Job log overview for job: SM:EXEC SERVICES 000000000100100 / 14484200
Job started
Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant &0000000000000, user ID ADMIN)
RDSMOPBACK_AUTOSESSIONS : MemSize Begin = 1374664
Solution AGI_Landscape is being edited (Operations)
( EWA_FS ) Session 0060000000029 for 25.08.2009 created (SOL)
( EW_ALERT ) Session 0060000000030 for 24.08.2009 created (BIP)
( EW_ALERT ) Session 0060000000031 for 24.08.2009 created (R3P)
Trying to perform session 0010000000305
Session 0010000000305 performed
Trying to perform session 0060000000028
ABAP/4 processor: SYNTAX_ERROR
Job cancelled
Any suggestions?
Regards,
Amit.

Getting this error when trying to install solution manager...Please help!!!

ERROR 2010-06-01 11:59:43.214 [synxccuren.cpp:78]
 CSyCurrentProcessEnvironmentImpl::setUser()
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (ntadmin, wdflbmd0360, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1015) in file (synxccuren.cpp).
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:408]
 handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE 2010-06-01 11:59:43.479
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2010-06-01 11:59:43.479
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-06-01 11:59:43.542 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP Solution Manager 7.0 EhP1 > Software Life-Cycle Options > Additional Preparation Options > Operating System Users and Groups( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/LM/USR. </body></html>
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2010-06-01 12:00:05.386 [sixxcstepexecute.cpp:1003]
An error occured and the user decided to stop.\n Current step "|NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment".

Hi, I am facing something like only.
I have windows 2008 Server 64 Bit/Oracle 11g 64 bit and trying to install SAP BI 7.0.
Please have a look at the log below:
WARNING[E] 2013-06-26 20:10:20.152
FSL-06002 Error 1722 (The RPC server is unavailable.
) in execution of a 'OpenSCManager' function, line (130), with parameter (ServicesActive).
WARNING[E] 2013-06-26 20:10:20.152
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2013-06-26 20:10:20.152
FCO-00011 The step setDefaults with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|NW_getDBInfo|ind|ind|ind|ind|2|0|NW_getDBInfoGeneric|ind|ind|ind|ind|2|0|setDefaults was executed with status ERROR .

Error - Update Product Data in Solution Manager

Similar Messages

Maybe you are looking for