Error update software 6300

I have a nokia 6300 and gives me the following error when I update the software SORRY THE NOKIA SOFTWARE Updater Service is currently unavailable Please try again later.........What should I do ..... HELP me, please

It is obvious, the online service from nokia is temporarily unavailable, please try again later! They must have shut it down for maintenance, try again in a few days.
Greece Nokia X6 RM-559 v40.0.002

Similar Messages

Error updating nokia 6300 software

Heloo
I tried o update my nokia 6300 device, I downloaded the program from the net! It was ok, untill i tryed to update my phone! Apperars a screen, which says:Updating software, pls w8:
and then don't panic.Everything happes ok,my screen blanked. But the Estimated time remained 15 min. I dont touch nothing, but 20 minutes later it says taht it cant find my phone, i have to try to reconnect it, pick out my battery an so... bla bla
I tried everything but it couldn't find 2nd time my device, and my device isn't turning on! Please help, what can I do??
NEED HELP URGENT, I don't wanna pay for repairt it, as this device ins't mine ((((((
Message Edited by csutakbalazs on 17-Nov-2008 07:29 PM

Look in the "Pool of Knowledge" board. The second topic there is "Recovering from a failed update".
If that doesn't work then you'll have to take the phone into a Nokia Care Point for repairs. The good news is, if the phone is under warranty, that the fix and the update will be free of charge.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Error updating software macbook air

Just bought a Macbook air. I tried to update software after 2 hours downloading time and two tries get an error message.
What can I do? return the device?
Thank you

Apps such as Little Snitch, Net Nanny, and Hands Off can prevent software updates from downloading.
Same for third party download managers.
Some security software such as Virus Barrier even though temporarily disabled can still prevent software from updating successfully.

Error updating software

Unable to update software on 3GS iphone. Error message "downloaded file is corrupted"

There are many possibilities. Try disabling your security software before downloading the update for a start.
Is there an error number? If so look it up here: http://support.apple.com/kb/TS3694

Errors Updating software

Hello,
I attempted to do a software update, but received the following messages:
Quicktime 7.62:
The following install step failed: run prefight script for QuickTime 7. Contact the software manufacturer for assistance.
Leopard 10.5.7:
The following install step failed: run preinstall script for MacOSXUpd10.5.7. Contact the software manufacturer for assistance.
The same for iTunes 8.2
I tried to 'Repair Permissions' via Disk Utility from the drive, and the CD, with no luck. The hard drive does seem to be making different noises than I remember as well... any solutions? I've backed up my information... please help!
Thank you!

Hi,
*"The underlying task reported failure on exit."*
Try and repair disk the disk.
Insert the installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
--- While you have the Disk Utility window open, look toward the bottom of that window. You will see Capacity and Available. Make sure you have a minimum of 10% free disk space, 15% is better.
If you cannot boot from your install disk, try booting in Safe Mode
Carolyn

Error updating software on OL6.3 due to package conflict

Hi, noob here.
I recently installed OL6.3 (in a VirtualBox VM). The install went well.
However, when I try to update the OS via Software Update, I get an error as follows which prevents any of the 748 updates being applied.
Test Transaction Errors: file /lib/firmware/isci/isci_firmware.bin from install of kernel-firmware-2.6.32-279.9.1.el6.noarch conflicts with file from package kernel-uek-firmware-2.6.32-100.34.1.el6uek.noarch
Any ideas?
thanks...

Here's what I get from yum update with just the one repo in yum.repos.d:
Finished Dependency Resolution
Error: Protected multilib versions: 1:cups-libs-1.4.2-48.el6_3.1.i686 != 1:cups-libs-1.4.7-1.x86_64
You could try using --skip-broken to work around the problem
** Found 12 pre-existing rpmdb problem(s), 'yum check' output follows:
audit-libs-devel-2.1-5.el6.x86_64 has missing requires of kernel-headers >= ('0', '2.6.29', None)
1:cups-libs-1.4.7-1.x86_64 is a duplicate with 1:cups-libs-1.4.2-39.el6.i686
glibc-headers-2.12-1.25.el6.x86_64 has missing requires of kernel-headers
glibc-headers-2.12-1.25.el6.x86_64 has missing requires of kernel-headers >= ('0', '2.2.1', None)
libcap-ng-devel-0.6.4-3.el6_0.1.x86_64 has missing requires of kernel-headers >= ('0', '2.6.11', None)
libdrm-devel-2.4.23-1.el6.x86_64 has missing requires of kernel-headers >= ('0', '2.6.27', '0.144.rc0.git2.fc10')
libgcrypt-devel-1.4.5-5.el6.x86_64 has missing requires of libgcrypt = ('0', '1.4.5', '5.el6')
msttcorefonts-2.0-1.noarch has missing requires of /usr/sbin/chkfontpath
xdialog-2.3.1-3.el5.x86_64 has missing requires of libgdk-1.2.so.0()(64bit)
xdialog-2.3.1-3.el5.x86_64 has missing requires of libglib-1.2.so.0()(64bit)
xdialog-2.3.1-3.el5.x86_64 has missing requires of libgmodule-1.2.so.0()(64bit)
xdialog-2.3.1-3.el5.x86_64 has missing requires of libgtk-1.2.so.0()(64bit)

Error updating software with version 1.1.3

i found the article that says if you get error 1602, to uninstall itunes and apple mobile device support and then reinstall itunes. and i did exactly that. but im still getting the same error! im just trying to update the software so i can get the january software upgrade... can anyone help??? i read somewhere in a discussion about re-downloading version 1.1.3 because the original file could be corrupt. is that the solution? if so, how do i do that?
i tried restoring the itouch but it attempts to restore it with the 1.1.3 software, which has failed over and over.
any help would be greatly appreciated! :]]]

Ok to find the corrupt file go to here: (windows xp)
C:\Documents and Settings\(YOUR USER NAME)\Application Data\Apple Computer\iTunes\iPod Software Updates
delete the iPod1,11.1.3_4A93Restore.ispw file (Its about 170MB)

Error - updating software and restoring

Hi,
I recently purchased an iPod Touch with software version 1.1.3 (with software upgrade). I recently connected to my laptop and it told me version 1.1.4 was available to download which I did. But when it comes to installing it says 'The iPod could not be updated. An unknown error occurred (1602)'. I have also tried restoring but get same error message.
Any ideas?
Thanks very much

Welcome to Discussions,
See if anything in these articles help,
http://docs.info.apple.com/article.html?artnum=306084
http://docs.info.apple.com/article.html?artnum=307219
fern

Error updating software wont boot up

So i have the latest macbook pro and i had a little extra time in my hands before i had to go to work so i decided to check my mac for software updates and their were some updates so i decided to updated it and it was downloading the stuff and after that it restarted im guessing so the items could install. everything was going smoothly untill it began to boot up it went to the gray screen with the gray apple logo and the loading bar under that after the loading bar was full the screen would go blank and it beeps 9 times then it turns of and restarts again and does the same thing!! this is getting very frustrating. my college final is in this macbook and i need a solution to it asap! please help im in desperate need!

Life would be so good if everyone that owned a computer also owned and used an external backup hard drive. You would never run into this kind of problem that could not be solved by simply going back to a recent, good backup.
But since yo don't have a backup, the next best thing to do is to Archive and Install from your original install DVD set. This will not delete any data on your drive. It will simply add a new, clean OS and you should be back in business since it appears that the update you did is what caused the problem. You will then have to update your OS up to the update version just BEFORE the one you just installed that is causing you grief.
Do yourself a favor and invest $100 in an external HD in an enclosure and do a daily clone backup of your drive and you will never have to run into this problem or many other kinds of problem again. Otherwise it is just a matter of time until you have another drive failure, hardware or software, of one kind or another that puts you out of business.

Error updating FB 4.5.1 on Eclipse 3.6

Hi all,
I have installed Flash Builder 4.5.1 Premium on Eclipse 3.6 SP2 as a Plug-in installation.
When I check for updates the updated "BlackBerry Tablet OS Plugin for Adobe Flash Builder, 1.1.0.201106171124" is found. I click next and finish and receive an error:
"Update software has encountered a problem:
An error occurred while collecting items to be installed
session context was:(profile=epp.package.jee, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).
No repository found containing: osgi.bundle,com.qnx.flashbuilder.multiplatform.qnx.ui,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.flexide.multiplatform.qnx,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.tools.bbt.core,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.tools.bbt.ui,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.tools.flashbuilder4.help,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.tools.flashbuilder45,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.flashbuilder.multiplatform.qnx.ui.examples,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.flashbuilder.multiplatform.qnx.ui.nl1,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.flexide.multiplatform.qnx.nl1,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.tools.bbt.core.nl1,1.1.0.201106171124
No repository found containing: osgi.bundle,com.qnx.tools.bbt.ui.nl1,1.1.0.201106171124
No repository found containing: org.eclipse.update.feature,com.qnx.tools.flashbuilder45,1.1.0.201106171124"
Any idea what is wrong here?
Thanks!
Paul

Try changing the "Java command line" in the FlexPMD preferences to change the location of the temp folder to somewhere FlashBuilder has permissions... This can be done by including the -Djava.io.tmpdir="
C:\Documents and Settings\{user}\Application Data\Temp" or a similar directory.

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

II have downloaded several Apps that state they work with iTouch but they will not install and give error message that I need updated software, while all my updates available are installed on both iTouch and my computer iTunesWhy will Mindtools app not

My iPod Touch will not function with certain updated apps ie MindTools, YP.com, Mint, Ymessenger etc and I get the error message that I need to install updated software to load these apps to my iPod Touch; however, I have double checked and all the software updates have been loaded in obht the iPod touch and my computer. There are no updates availabe; yet the error message on App is a software update is required for App. "was not installed because it requires a newer version of iPod software."
The iPod Touch is using 3.1.3 software and it tells me that is the current and updated software version.

You are correct in that your 1G iPod Touch has all the latest software updates. It can only be updated to version 3.1.
However that Apps you are trying to download and install likely require iOS version 4.0 or later, which is not compatible with your iPod Touch. So either you'll need to buy a newer iPod Touch or find other Apps that are suitable replacements if possible.
Sorry.
B-rock

Picture of usb plugging into itunes, received error while updating software for ipod touch

tried updating software on new (refurb) ipod touch. everything was going ok with updates, when it was almost complete i received an error. now i have a picture of itunes with a usb cord plugging into it and it won't do anything else. accessed itunes through firefox. any suggestions?

Try here. iPhone and iPod touch: Unable to update or restore

Error message when updating software

Whenever I attempt to update software I get an error message stating that my computer is unable to create a folder. Today when updating iTunes I got this: The Installer could not create the folder “/private/tmp/AppleMobileDeviceSupport.pkg.766WaORpr
Any help is greatly appreciated

Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Try updating iTunes again.

Error update software 6300

Similar Messages

Maybe you are looking for