Error updating BIOS from Windows Vista: error -15. Satellite a215-s7437

I've tried to update the BIOS of this laptop which currently runs version 1.2, when the latest version is 2.0. When I run the BIOS update from Windows Vista, it fails with error code -15, with a message similar to "current BIOS checksum fail". The laptop was bought in Spain. Any ideas? The knowledge base was completely useless for this issue. Pedro.

Does the computer still work at this point?

Similar Messages

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

I just did an itunes update on my windows vista 64 and have been getting a runtime error eversense. Unstalled everything apple per microsoft forum discussions and solved the problem. When is apple going to update this problem for itunes?

I just recently did an itunes update on my Windows Vista 64 and have been getting a runtime C++ R0634 error ever since. Per microsoft forum discussions, I have removed everything apple on my computer to get this runtime error to stop. When I tried to remove and reinstall itunes, I get an error message during installation and to try again. Has just become a cycle. Apple, are you working on this?

I have exactly the same problem. Got update notice from Apple for iTunes and getting the C++ runtime error R0634 ever since. I have no clue how to fix it....meantime, I can't even pull up Outlook to check email. HELP!!
ksware

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

TS3212 I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.

I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.

Troubleshooting issues with iTunes for Windows updates - MSVCR80

How do i sort out error r6034 on my windows vista when i try to start itunes, the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly,

how do i sort out error r6034 on my windows vista when i try to start itunes ???
the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the application's support team for more information.

Hey deepakmenonfrompune,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

How do I correct a Windows Vista error for HP Officejet 6500 E709n wireless?

I continue to get a Windows Vista error when trying to install the printer software ...now it does print, but only the bottom half of a page..???

Dave, I would recommend completely uninstalling the printer from Programs and Features (after unplugging the USB cord if you are using one), and removing the printer from both Device Manager and Devices and Printer.
We are going to reinstall the printer from one of the downloads that HP makes available, but first I will have to know if your printer is the 6500A or the 6500. Also is your Win Vista machine running 64bit software or 32bit software?
If you can give me a complete product name and the information on your system, I will link you to the appropriate download.
Let me know!

HT2305 Since updating my laptop from Windows Vista to Windows 7, my Ipod Shuffle, 3rd generation does not recognize last 3 playlist names; it calls them out as "playlist 3, playlist 4 -- even though in the panel the names are showing just fine. The music

I have recently updated my laptop from Windows Vista to Windows 7. I have just added three new playlists to my Ipod Shuffle, 3rd generation. On the panel in ITunes in view on the computer, all looks fine and music plays. However, after syncing a million times, when clicking to "hear" the playlists, the voice will call out all the old playlists just fine - except for the 3 new ones I've added; it calls them out as "playlist 3, playlist 8, or "purchased". All software for the ITunes has been updated as of the moment. Why would switching from Vista to Windows 7 cause this frustrating issue? All help appreciated.

From page 23 of your iPod's User Guide: http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
If VoiceOver is disabled in iTunes, you hear an abbreviated menu of playlists in numbered order, but not by name (for example, “Playlist 1, Playlist 2,” and so on).
So you'll want to make sure VoiceOver is enabled to correct this.
B-rock

Cnat update itunes get windows installer error message

When trying to update itunes get window installer error message. Running windows vista

What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. FIRE FOX UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES.

FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit

You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
* for information on the options available see [[Updating firefox]] <--- clickable link ---

Windows Easy Transfer can't transfer files from Windows Vista or Windows XP

I'm running a English Windows Vista Ultimate and just bought a
ENGLISH Windows 8.1. I've downloaded the WET for Windows vista and tried to complete the second portion of the transfer by specifying the saved .MIG file WET created. Then I got the error message: "Windows Easy Transfer can't transfer
files from Windows Vista or Windows XP".
The truth is, Microsoft was too busy integrating special effects to it's operating system and claimed it as fully polished instead of making sure built-in tools were worth using.
Another harsh reality is that THERE IS NO WAY TO TRANSFER a file from Windows Vista to Windows 8. That's because engineers didn't even bother to make that possibility happen. Just Google: "Transfer from windows vista to windows 8" and you'll see
there are no relevant Microsoft web page about this.
Worse, Microsoft is giving excuses. To solve this issues, they came with a toolbox of fake scenarios in order to confuse clients even further, while they know damn well the Windows Easy Transfer is NOT EASY and certainly in multiple cases
DOES NOT TRANSFER jack to begin with.

I somewhat agree with you.
Trying to transfer from 7 to 8.1 and although it looks like the "7" side of the equation is working, the "8" side isn't.
"7" is trying to connect to "8" but "8.1" is being just plain stupid.
Not even sure why the MIG file step is even necessary if all I want to do is transfer one file between two machines. Said file is really BIG, or i'd just use my network, and the "8.1" rig doesn't have a dvd reader...
Per the MIG step... my file again, is big... I'd need to "mig" this file just to send it? Can't even get to the step where I'd mig-it and if i did, how long would that take?
So this is what progress is all about... geez... gimmie a NULL MODEM CABLE !!!

Unistalling labview 7.0 and 8.0 from windows vista

how do i uninstall labview 7.0 and labview 8.0 from windows vista? i tried removing them from control panel but i run through this instead; "ERROR 1922: Service 'Lookout citadel server' could not be deleted" (refer to the attachment)
Attachments:
labview error.jpg ‏324 KB

Duplicate post

Unistalling labview 7.0 and 8.0 from windows vista

how do i uninstall both labview 7.0 and 8.0 from windows vista? i run through conflicts of labview with other programs so i want to remove them. there were errors encountered when i tried to uninstall them from the control panel such as this:
Attachments:
uninstall error.doc ‏210 KB

Can you stop the service manually? I would suggest stopping the service, setting it Manual or Disabled, rebooting, and then run the uninstaller again. Hopefully you won't have to resort to uninstalling the service manually.

Uninstalling oracle 10g enterprise edition from windows vista

HI There,
I want to uninstall oracle 10g enterprise edition from windows vista home premium edition. I have uninstalled it using oracle universal installer and then deleted folder from program files. But I am unable to delete the main folder i.e. D>Oracle..
It is displaying error message 'access denied' Please suggest me on this issue.. How can I delete that one so that I can instal it again. I would be really grateful.
kind regards

Can someone help me on this issue.. That would be great...

Go Daddy UCC Certificate: "ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update"

Hello,
I have this issue regarding certificate chains while performing Outlook Anywhere connectivity test
by Microsoft Remote Connectivity Analyzer:
"ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled."
Note: even if I got the error, Outlook Anywhere and
ActiveSync services work fine.
Environment:
- Exchange 2007 with SP3
- Go Daddy Multiple Domains UCC certificate (up to 5 Subject Alternative Names)
I already read and followed instructions on this TechNet post
Can I safely ignore this warning about the SSL cert? Using GoDaddy UCC cert but it is a little bit different by this case.
So after an investigation I understand the issue above is related to SSL certificate
Certification Path (see screenshots below).
NO ERRORS on ExRCA checking
Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
repository
Go Daddy Class 2 Certification Authority is under Intermediate Certification Authorities
repository
Starfield Technologies (http://www.valicert.com)
is under Trusted Root Certification Authorities repository
ERROR on ExRCA checking
Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
repository
Go Daddy Class 2 Certification Authority is under Trusted Root Certification Authorities
repository
Can you add some useful information ?
I'm opening a support ticket at Go Daddy; I hope they could me some positive feedbacks.
Regards,
Luca Fabbri
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees, and confers no rights.

Strange I have a feeling the exrca tool can't validate the godaddy class2 root authority due some older compability and wants to use the older original root authority valicert owned godaddy. Or when the exrca tool is validating the root CA it only has the
goaddy class2 root ca that was issued by valicert and not the standalone cert when doing the comparision. I sent the question to MS and will let you know when I hear back.
You can get rid of it
https://certs.godaddy.com/anonymous/repository.seam
Download the cert
◦gd_cross_intermediate.crt
Then import it into the trusted root cert authority on your CAS boxes. Then you need to delete the other godaddy class2 root authority. Make sure you see the one you imported both will be named goaddy class2 root authority but one will be issued by valicert.
Re-run the test and it will go away, I also saw the error with my domain as well using godaddy and got rid of it by using the new cert authority.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Error updating BIOS from Windows Vista: error -15. Satellite a215-s7437

Similar Messages

Maybe you are looking for