Error updating BIOS on B75MA-P45

When I try to update my BIOS on B75MA-P45 I get the corrupt file error:
Please help!

Don't use live update for such things. If you don't have any problems, bios shouldn't be updated anyway. If there is a need however, use >>Use the MSI HQ Forum USB flasher<< and download the bios file from MSI's website. http://www.msi.com/product/mb/B75MA-P45.html#/?div=BIOS

Similar Messages

  • Error updating BIOS from Windows Vista: error -15. Satellite a215-s7437

     I've tried to update the BIOS of this laptop which currently runs version 1.2, when the latest version is 2.0. When I run the BIOS update from Windows Vista, it fails with error code -15, with a message similar to "current BIOS checksum fail". The laptop was bought in Spain. Any ideas? The knowledge base was completely useless for this issue. Pedro.

    Does the computer still work at this point?

  • Boot camp assistant error update BIOS

    I have a Mac Pro 4.1 using 10.6.5 and BC Setup Assistant 3.0.1.
    I'd like to enlarge the space on my BC partition of my startup disk, but I have the familiar boot camp assistant error which tells the user that in order to install boot camp you must update the Boot ROM Firmware. I've already updated the firmware to 1.4 (MP4.0081.B07; SMC Version 1.39f5), so this gets me nowhere. What's a little different about my problem than most of the others I've seen is that I have an early 2009 Mac Pro, not a laptop, AND journaling is enabled on all my disks.
    I tried downgrading to 10.5.6 by installing it on another drive and starting up from that. It shows that Boot Camp Setup Assistant is version 2.0, but still it tells me that I need upgrade the Boot ROM Firmware.
    From within Windows I installed Boot Camp 3.1 and 3.2 and restarted both times. I've run Disk Utility and verified and/or repaired Disk Permissions on startup disks; so, too, Verify Disk.
    Any help you can offer over this American Thanksgiving Holiday will be greatly appreciated.

    Paragon-Software CampTune $20 can resize.
    But I would just put Windows on its own hard drive instead.
    Has nothing to do with OS X. Your drive's free space and how fragmented can be an issue when creating Windows partition.
    The error message is in error itself and not helpful or accurate.
    http://www.apple.com/support/bootcamp

  • Arch Linux error - update bios or force_addr

    im installing it on virtualbox,
    ah brilliant, ill look into it!
    thanks

    Hi all,
    im getting through the process of installing arch linux and got to installing the gnome desktop, now im receiving this error and cant type any command!
    any help would be appreciated!
    This topic first appeared in the Spiceworks Community

  • B75MA-P45 BIOS Update

    I wonder if someone could shed some light on this for me. I currently have a B75MA-P45 mainboard, or MS-7798 as live update labels it. Currently it doesnt allow me to get into the bios with my logitech usb keyboard and I have to plug in a ps2 one which kinda irritates me. Having flashed a great many bioses in the past I thought this should be relatively easy. Oh how wrong was I ?
    So first of all I install live update from the website which comes under my board section so should in theory work, but when I download all the drivers and click bios II it informs me that it doesnt support that board. ? similarly when I try and execute msi control centre it tells me it doesnt support this board.
    So I read in the bios something about winki being able to do it, so I download the image, burn it, start it up and then winki tells me it doesnt support this board.
    How is all this possible when I download them from the msi site under my board section? Really, is there not a simple way to do this ?!?!?!
    I haven't tried usb stick yet because I dont have one, but I just can't believe there isn't a windows flasher that will work.

    Quote from: christopher.roffey on 17-September-13, 04:44:23
    Well most of those options mean I have to go and spend money on a usb stick just to upgrade the bios, which I've never had to before. And sure I'll probably get loads of flamers telling me how cheap they are but that's very much besides the point. I've flashed plenty of motherboards from windows before now without incident, you can always verify it before you reboot.
    And besides, this does not explain the why it is that click bios 2, control centre and winki all say they do not support my board, and yet they were downloaded from the boards section on the msi site.
    Any explanation for this ?
    I also flashed lot of boards before without problem but my last try using a windows and this "great" live update utility lead to a bricked board and it was not my fault. I've got BSOD so there was no way to go back. So many things can happen in windows so my recommendation after this xperience is to never flash the bios in windows! The board is now at manufacturer to reflash the chip... A moth lost for me...

  • [B75MA-P45] UEFI Bio Version [E7798IMS.1xx]

    E7798IMS.160 ===> E7798IMS.176 Beta Bios
    VGA BIOS        : 2137
    GOP      : 3.0.14.1015
    ME Version      : 8.1.40.1416
    LAN OptionRom   : 2.41/1.24 UEFI:2.008
    01. Switch to PLL mode for clock buffer.
       02. Fix can't detect LSI 9270-8i RAID card.
       03. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
           but the option has display garbled.   
       04. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
            05. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz. 
       06. Remove Switch to PLL mode for clock buffer solution.
       07. Patch Fast Boot PS2 Devices Support disable function incorrect.
       08. Update ME 8.1.40.1416.
       09. Modify the PCH Sata Aggressive LPM Support item default value.
       10. Adjust Fast Boot PS2 Devices Support disable function incorrect solution.
       11. Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000019).
           &Update CPU Microcode for Sandy Bridge Q-0 and D-2(M12206A7_00000029).
       12. Add solution to fix System hang up "A2" with some hard disk.
       13. Update Fixbootorder module to support AMI BCP tool.
    01. Modify the CSM erp market name to be CSM-B75MA-P45.
    01. Modify the PCH SATA Aggressive LPM Support item default value.
       02. Add CSM erp.
    01. Add "Long Duration Power Limit","Short uration Power Limit","Primary Plane Turbo Power Limit", "Secondary Plane Turbo Power Limit" range to 4096.
       02. Fix UEFI OS 80 port can't show CPU temp issue.
       03. Fix clear cmos after boot option priorities show error issue.
       04. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
       05. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
       06. Update SMBIOS module ver 34.
       07. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
    01.Disable"Secure Boot"when "Windows 8 feature"set from"Enabled"to"Disabled"
         to patch some NV¡¯s graphics card capability issue.
       02.Fix it will show error characters in Boot device priority after disable
         some boot options.
       03.Fix some monitor hang B2 issue.
       04.Limit Snapshot to be triggled just one time while system with multiple USB
          keyboards pluged.
       05.Change French language error in the option Load Overclocking Profile X
    01.Fixed build-in shell disappear issue when update FixedBootOrder13 module.
       02.Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
       03.Update new solution for fix select BIOS Setup Discard Changes and Exit
          item after can't enter os issue
       04.Fix connect some usb device will can't enter os.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

    As it supports M-FLASH you will (according to MSI) be able to use a USB drive as a BIOS chip and boot the computer,
    This info is taken straight from your motherboards page at msi.com
    M-Flash
    Compared to common motherboard which need extra BIOS chips, MSI’s M-Flash has a double advantage which doesn’t need extra components and secondly, all your BIOS data will be saved in the USB drive. The stored data does not only have backup and upgrade function, moreover it can also be seen as a portable BIOS chip which is actually able to boot up your PC.
    Features
    - Backup/Restore Your BIOS to/from Any USB Flash Disk
    - Avoid Unnecessary Repair Due to Accident Failures During The Upgrading Process
    - Earn more BIOS Lifespan by Reducing Unnecessary Rewriting Process

  • Thinkpad Yoga memory error after bios update

    I updated BIOS to version 1.25 for windows 10 installation.Now I have errors and sometimes blue screen. Lenovo solution center test gives a memory error.WME800800-RK7CBK

    Dear luca,
    welcome in lenovo community,
    Could you please send us your machine serial number
    Thanks to use lenovo community.

  • H61MU-E35 (B3) Updating BIOS....File Not Found Error

    I have MSI H61MU-E35 (B3) Motherboard with Intel i3 CPU.
    I downloaded latest BIOS File  7680vC3.zip (on web page it's says Version: 12.3 from  -> -www.msi.com/support/mb/H61MUE35_B3.html#down-bios
    Using Windows XP OS  From 7680vC3.zip => Extracted E7680vC3.exe  => Placed on USB Drive (I did not format USB Pendrive, and used by just making it empty by deleting files) ==>  Ran this exe file on the computer where this motherboard is....
    Inside Windows XP, when BIOS Update process started, In a green window, it shown me current BIOS old version and  New Version side by side.  (I did not given much attention to notedown from which number to which number it's updating).
    In Windows XP after BIOS Process completed, it restarted computer (I kept USB File as it in the computer as I had read that, I have to keep USB in computer after restart).
    When computer restarted...nothing came on the screen and just blank screen for long time and on the right side on screen bottom corner only letter like: A2 stayed for long long time.  I waited for 15 minutes but nothing was happening except blank screen...
    So, I restarted computer....and kept USB as it is in the computer....but Nothing comes on the screen...
    After I concluded that, something is wrong, to resolve the issue...
    --- What Try and Experiments I have done  ----------------------------------------------------------------
    (1) I placed Restarted computer without USB: and Message comes on the screen is:
    BIOS Update is not yet completed, please insert the USB pen drive  and reset system.
    (2) I refered some forums, and also contacted MSI Support. As suggested, I formatted USB Drive with FAT32 and placed  E7680IMS.C30  file (only one file) on USB placed in computer and started computer.. Now Message is coming:
    Updating BIOS...... File Not Found..
    Note that: E7680IMS.C30  File was given to me by MSI Support Staff as I did not kept Original files during formatting USB PenDrive.
    But computer is not looking for .C30 Rom File, Computer is looking for .BIN File
    (3) I have remove the battery and waited for 5 min. and placed again, to reset BIOS, but not difference on result or on message...
    Renamed: file E7680IMS.C30 to EIVB.BIN
    Result: Just Blank Screen with A2 text on right side bottom corner, No other message
    In some other same issue post, they recommand to change ROM File name to: EIVB.BIN which worked for others, so I also tried and renamed: file E7680IMS.C30 to EIVB.BIN, in this case, I was able recreate original Issue:  When computer boots, Screen stays completely Blank, and on the right side bottom corner, only 2 digit tect comes is: A2. Computer does not give any other message and nothing happens...even I waited for 30 minutes...
    Also, by looking at USB Pendrive light, I can tell that, motherboard is reading file on the Pen Drive...
    Renamed: file E7680IMS.C30 to E7680IMS.BIN
    Result: Message comes on the screen: Updating BIOS...... File Not Found..
    (5) What I am thinking is:  When motherboard power-ups, it's giving me two different type of Valid message based on if USB is in the computer or not, based on if file name is .BIN or not, so I believe motherboard is still not dead and there are hope to feed the file which motherboard is looking for. But issue how to find what specific file which it's looking for... Even sometime I have seen at screen right side bottom area, 2 Digit numbers are changing just like system is doing internal healthcheck before booting up...
    (6) Note that, I would like to put old version file on USB to feed, but one of the biggest issue with MSI is, once you download EXE from their website, to Extract EXE file content it needs to be run on the same motherboard computer, so in my case, if your motherboard is not in bootable cituation then you can not extract any other BIOS File to try...
    Please help me...by havin this computer down....I am suffering everyday...
    (By profession, I am electronics Engineer and have worked with programming Microcontroller and bootloaders, but in this case, I do not have SPI Programmer to program BIOS chip externally.)

    Thank you flobelix  and Nichrome.
    Quick Result Summary:  128MB USB Key formatted FAT32 with HP Tool, made MS-Dos Bootable and placed EIVB.BIN file given by  flobelix, but final result is: Screen comes Blank and only shows "A0" Code at right side bottom corner. nothing else.
    Detail
    Since Flobelix proviced ROM BIN File, I was too exicited to try it out and here is what I did...
    (1) As per Nichrome link for HP USB Format Tool, I installed it on "Win XP" machine, and formatted 128MB USB key by selecting "FAT32" and selected option to make "MS-DOS Bootable" and shown Win98 source files as per the instruction.
    -128MB USB drive made bootable with FAT32.
    (2) I downloaded EIVB.rar given by flobelix and extracted and copied EIVB.BIN file on USB root.
    Inserted USB in MSI and powered up...
    As soon as I give power:  Imidiately one normal beep and Screen comes completly Dark Blank. No message about "File not found".  only at right side bottom of screen, it shows "A0".
    I inserted USB key in each and every USB slot, but result is same: Screen stays Blank and on right side corner only "A0" letter.
    I given around 3-5 minutes time to see something changes on screen, but no change.
    - If I power-up computer without connecting any USB Drive: then message comes on screen that: Bios Update has not completed, please insert USB Key and Reset System.
    - On USB Key, If I put ROM File with any other name (except EIVB.BIN) then Message comes:  Updating BIOS... File Not Found...
    - I have removed battery to give a try for resetting BIOS, but not change.
    Question:
    (1) Is it possible that, motherboard is looking for specific version of File or some different version of file ? and just staying silent and not complaining for existing EIVB.BIN ?
    Here is I experiment:  I simply created empty text file (0 Byte) on USB Drive and given name EIVB.BIN  and booted up computer and same result: Blank Screen and just "A0" on right side bottom corner.
    So, it tells me that, when power is given, the program which executes in motherboard for BIOS, it is not able to identify real or fake EIVB.BIN.  I think, it's looking for some specific file and when not found, it's getting confuse on what to do....and not saying anything on the screen....
    Has anyone old version BIN file of H61MU-E35 (B3)  ?
    Is there any trick so I can download older version Packaged EXE from MSI website and extract it ? I can give a try....

  • Problem with B75MA-P45

    Guys:
    I've got a B75MA-P45 LGA 1155 with an intel core I5 3450, but I want to install win7, appears error 0xc00000e9 and then reboot.
    The hard disk is a Western digital WD5000AAKX 500 GB 7200 16 MB Sata 3, new.
    In the BIOS, I changed from SATA to IDHE in advanced options, and then I could install windows.
    The questions is why that happens?

    Yes. But it doesn´t work.
    I Tried to install win7 in the HD, but in my old PC, and It worked.
    When I conected the HD to B75MA-P45, It stop in starting windows, and reboot.
    After that, I changed the BIOS config (IDHE to SATA in advanced options), and windows worked.
    I think that shouldn't happen....

  • B75MA-P45 with celeron g1610?

    I bought IB Celeron G1610, and planning to buy B75MA-P45. My question is will it work with this MB? On CPU support list, for this board, is not listed, maybe the list isn't populated or something...

     Best to ask MSI.    http://us.msi.com/service/PreSaleForm/
     That CPU was released this year, last BIOS update for that MB was December of last year so no telling whether that CPU would work or not, probably not or if it does it would not be fully supported and would possibly have problems with it.
     Edit: I just did a bit of a search at MSI and from the list of MB's that support that CPU I found this B75 part of the list:
        B75A-E33
        B75A-G41
        B75A-G43
        B75IA-E33
        B75MA-E33
        B75MA-G43
        B75MA-P45
     So apparently it is supported and MSI has not updated CPU support list since Dec last year.

  • Compatibility HD 7790 B75MA-P45

    Hi guys, i need help. I got this motherboard: cz.msi.com/product/mb/B75MA-P45 .html and i buy this graphic card: cz.msi.com/product/vga/R7790-2GD5-OC .html. Before this card i have ATI SAPPHIRE HD 2600XT and my computer works perfectly. Now I installed new graphic card, installed drivers from CD and here my problems started. I get BlueScreens PAGE_FAULT_IN_NONPAGED_AREA randomly. Is it that graphic card is not compatible with my motherboard? I runned HD Tune PRO my HDD is clear any MemTest86+ doesn´t show nothing (4GB Kingston HyperX DDR3 1600Mhz). I got Windows 7 Home Edition 64bit and nothing overclocked. What´s wrong?

    Board: B75MA-P45
    Bios: Version 1.8
    VGA:   MSI R7790-2GD5/OC
    PSU:   Corsair CX500 (500W, 80 Plus Bronze, ATX2.2, aktívne PFC, SATA, 120mm)
    Intel Core i5-3350P Ivy Bridge 3.1GHz (3.3GHz Turbo Boost) LGA 1155 69W
    MEM: Kingston 4GB DDR3 1600MHz CL9 HyperX blu Edition
    HDD: Western Digital Blue 1000GB 64MB cache
    COOLER: Intel Box Fan
    OC: Nothing
    OS: Windows 7 64bit Home Premium
    Have ATI SAPPHIRE HD 2600XT before, no problems, now installed AMD HD 7790 2GB OC and have blue screens PAGE_FAULT_IN_NONPAGED_AREA.
    Reinstall my Windows, installed new drivers from amd.com, download newest drivers for motherboard from msi.com, installed new BIOS v1.8.
    Checked HDD with HDD Tune PRO, no errors, RAM module checked with MemTest86+ and no errors.
    WhoCrashed show me that BlueScreens was beause of Avast! driver fault, uninstalled it and blue screen show aggain and show this:
    System Information (local)
    computer name: IQON-PC
    windows version: Windows 7 , 6.1, build: 7600
    windows dir: C:\Windows
    CPU: GenuineIntel Intel(R) Core(TM) i5-3350P CPU @ 3.10GHz Intel586, level: 6
    4 logical processors, active mask: 15
    RAM: 4226740224 total
    VM: 2147352576, free: 1996439552
    Crash Dump Analysis
    Crash dump directory: C:\Windows\Minidump
    Crash dumps are enabled on your computer.
    On Sun 13. 10. 2013 13:00:59 GMT your computer crashed
    crash dump file: C:\Windows\Minidump\101313-15475-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
    Bugcheck code: 0x50 (0xFFFFF8A0083F6000, 0x0, 0xFFFFF80003146079, 0x0)
    Error: PAGE_FAULT_IN_NONPAGED_AREA
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that invalid system memory has been referenced.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    On Sun 13. 10. 2013 13:00:59 GMT your computer crashed
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
    Bugcheck code: 0x50 (0xFFFFF8A0083F6000, 0x0, 0xFFFFF80003146079, 0x0)
    Error: PAGE_FAULT_IN_NONPAGED_AREA
    Bug check description: This indicates that invalid system memory has been referenced.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    It´s because of compatibility of graphic card with my motherboard or some other problem?
    Now i tried this:
    Shot in the dark here:
    1) Open Start, right-click My Computer, and then click Properties.
    2) Click the Advanced tab.
    3) Under Performance, click Settings.
    4) Click the Advanced tab.
    5) Under Virtual Memory, click Change.
    6) Click No paging file. Click OK, ok, ok and make sure to apply.
    7) Restart your computer.
    8) Open Start, right-click My Computer, and then click Properties.
    9) Click the Advanced tab.
    10) Under Performance, click Settings.
    11) Click the Advanced tab.
    12) Under Virtual Memory, click Change.
    13) Click System managed sized. Click OK, ok, ok and make sure to apply.
    14) Restart your computer.

  • R9 290 problem on MSI B75MA-P45

    Hello there,
    I have two computers here.
    Comp1:
    Main Board: MSI B75MA-P45
    Bios Version: 1.9 (Latest)
    Video Card: onboard
    PSU: GigaByte 610Watt (Peak 750 Watt)
    12v rail Rating of listed PSU:
    CPU: Intel G860
    Memory: 16GB
    SSD/ HDD: 240GB SSD Samsung
    CPU COOLER:
    Raid Card:
    Sound Card:
    Any Additional hardware plugged into your system: no
    OC: No
    Operating System: Windows 7 64 bit
    Comp2:
    Main Board: MSI-H61MA-E35 (B3)
    Bios Version: -
    Video Card: onboard
    PSU: OCZ 500W Mod-X-Stream pro
    12v rail Rating of listed PSU: -
    CPU: G630
    Memory: 8GB
    SSD/ HDD: 240 GB SSD-
    CPU COOLER:
    Raid Card:
    Sound Card:
    Any Additional hardware plugged into your system:
    OC:  No
    Operating System: Windows 7 64 bit
    The problem is that my new R9 290 doesnt work on the first comp. When pressing the power button the fan of the GPU is maxing and makes alot of noise. Connecting my monitor to the onboard GPU i see the comp is working and is booting into windows. Updating the Bios didnt work and chosing PEG instead of IGP doesnt matter.
    To check if the R9 290 is working i put it in comp2. It boots normally, and no problems. I began to wonder if the PSU of comp1 is the problem.
    So i Changed the PSU of comp2 to comp1 and pushed the power button. Same as before: alot of noise and not working.
    Meanwhile it Boots into windows. Connecting my monitor to the onboard video I can see it boots into windows. But  I dont see the R9 290 at all in the hardware device list.
    My first conclusion: The XFX R9 290 isnt recognized by the B75MA-P45 Motherboard at all, even when i switch the PSU from comp2.
    I need the card to work on comp 1 because that is my computer. (Comp2 I borrowed from a friend for testing).

    Quote from: vondutchx on 28-December-13, 18:40:07
    Litecoin mining :P, and for the games i play the setup is more then enough. If it would work...
    A tip to all the Bit/Lite coin miners:
    Just plug 6 AMD graphic cards into a piece of wood and you'll become a real "miner".

  • Upgrading graphics card in B75MA-P45 system

    I have a B75MA-P45 based system with basic msi / nvidia graphics card (630) I think.  The system runs Win8x64 nicely.
    I have tried upgrading the graphics card to amd 7850. With the new card, the system never shows the normal bios splash screen.  It can, however, get to Win8 after a bit of patience, if I disable secure boot.
    The bios is 1.3B9.  I note that the latest bios (1.5) is said to have improved PCI-E display card compatibility.
    I am wary of updating the bios because a lot of the uefi-style settings seem to be undocumented in the motherboard manual (notably those relating to secure boot, win8 certification, compatibility modes, key generation, etc).
    What is my best strategy for trying out the new bios without losing all the bios settings, keys, etc, that currently work, with a view to reverting to the existing bios / settings if necessary?

    If you update you will in any case loose all current bios settings, CMOS will be cleared. You can take screenshots in UEFI to set again what was set before. Reflashing to the prior bios would require asking for here as downgrading requires a special file.
    If you decide to flash >>1.5<< >>use the MSI HQ Forum USB flasher<<

  • B75MA-P45 USB 3 windows 8 ISSUE

    To MSI:
    There is a problem with the usb-3 and windows 8 on B75MA-P45 motherboard.
    It will not recognize a external usb-3 HDD, it will show that it is connecting the device but it's not showing in the explorer, it can't be access, then later, Windows 8 will create an error message on the drivers installation.
    My external HDD is a TOSHIBA 750GB, the CPU is corei3 (3rd), two memory Patriot 4GB DDR1600, the HDD 1,5TB SEAGATE, and the system is windows 8 professional
    Any suggestions?
    Thanks in advance.

    What is the bios version?
    I have attached the most recent full release.
    >>Use the MSI HQ Forum USB flasher<<
    Option1 point at the full archive (do not extract the files) then point the tool at your fat32 formatted usb stick.
    Boot to usb and flash.
    If you are already at this version, reflash anyway, clear the cmos with the power cord removed and retest.
    If the problem persists, I will check for a beta version to try.
    Edit:
    Make sure this is your board prior to flashing.
    http://www.msi.com/product/mb/B75MA-P45.html#/?div=BIOS

  • Can not update BIOS R830-14U

    Notebok Satellite R830-14U (part ? PT32LE) with BIOS 2.70 & EC 1.10
    after upgrade Intel Management Engine Interface v.7.1.52.1176 i can not update BIOS - error "This computer is not supported"
    http://ru.computers.toshiba-europe.com/innovation/dodriverLanguage=42
    The ME Interface provides thermal management for Intel Mainboards. The Intel Management Engine Interface (Intel ME Interface) is the interface between the Intel Management Engine firmware and the host. Drivers and applications on the host that wish to interact with Intel Management Engine through host interface would use the Intel ME Interface host windows driver.
    Model: Tecra R850, Portege R830, Satellite Z830, Qosmio F750, Portege Z830, Satellite Pro S750, Tecra R840, Satellite R830, Satellite Pro R850, Satellite R850
    Downgade Intel Management Engine Interface to 7.00.02.1164 and/or reinstall Value Update Pack (vap-2011-614162421.zip) does not solve the problem.
    What else can I do to fix this problem?

    The problem is solved in complete restoration of the image of the disaster

Maybe you are looking for