Error updating DP while trying to deploy portlet

Hi ,
While trying to deploy portlet I am getting the error "*Error updating DP :Failed to store display profile*" and the portlet is not getting deployed.
Can anyone please let me know why it occurs and how can I resolve this issue ? Let me know if further input is needed.
Thanks ....

Hi ,
I am getting the following error in the portal log file .Please let me know how this issue can be fixed ?
PortletDeployerException:
com.sun.portal.portlet.admin.mbeans.tasks.PortletDeployerException: errorStoreDP
     at com.sun.portal.portlet.admin.mbeans.tasks.PDDPUpdater.storeDPDocument(Unknown Source)
     at com.sun.portal.portlet.admin.mbeans.tasks.PDDPUpdater.addProviders(Unknown Source)
     at com.sun.portal.portlet.admin.mbeans.tasks.PDDeploy.process(Unknown Source)
     at com.sun.portal.portlet.admin.mbeans.PortletAdmin.deploy(Unknown Source)
     at com.sun.portal.portlet.admin.mbeans.PortletAdmin.deployAll(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
     at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
     at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
     at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
     at com.sun.jdmk.interceptor.MBeanServerInterceptorWrapper.invoke(MBeanServerInterceptorWrapper.java:512)
     at com.sun.portal.admin.server.PortalServerLoggingInterceptor.invoke(Unknown Source)
     at com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:736)
     at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
     at com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
     at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
     at javax.management.remote.generic.ServerIntermediary.handleRequest(ServerIntermediary.java:280)
     at javax.management.remote.generic.ServerIntermediary$PrivilegedRequestJob.run(ServerIntermediary.java:951)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.management.remote.generic.ServerIntermediary$RequestHandler.handleMBSReqMessage(ServerIntermediary.java:727)
     at javax.management.remote.generic.ServerIntermediary$RequestHandler.execute(ServerIntermediary.java:629)
     at com.sun.jmx.remote.generic.ServerSynchroMessageConnectionImpl$RemoteJob.run(ServerSynchroMessageConnectionImpl.java:266)
     at com.sun.jmx.remote.opt.util.ThreadService$ThreadServiceJob.run(ThreadService.java:208)
     at com.sun.jmx.remote.opt.util.JobExecutor.run(JobExecutor.java:59)
Caused by: com.sun.portal.desktop.context.ContextError: DSAMEConnection.setTemplateAttribute(): , dn=o=CW,cn=portal, serviceName= SunPortalportal1DesktopService, sunPortalDesktopDpDocument=<?xml version="1.0" encoding="utf-8" standalone="no"?>
<display profile >
at com.sun.portal.desktop.context.DSAMEConnection.setTemplateAttribute(Unknown Source)
at com.sun.portal.desktop.context.DSAMEConnection.setAttributeByDN(Unknown Source)
at com.sun.portal.desktop.context.DSAMEAdminDPContext.storeDPDocument(Unknown Source)
... 28 more
Caused by: com.iplanet.am.sdk.AMException: Unable to set attribute(s).::LDAP Error:An internal error occurred in the LDAP server.
at com.iplanet.am.sdk.ldap.DirectoryServicesImpl.processInternalException(DirectoryServicesImpl.java:320)
at com.iplanet.am.sdk.ldap.DirectoryServicesImpl.setAttributes(DirectoryServicesImpl.java:2789)
at com.iplanet.am.sdk.ldap.CachedDirectoryServicesImpl.setAttributes(CachedDirectoryServicesImpl.java:951)
at com.iplanet.am.sdk.AMObjectImpl.store(AMObjectImpl.java:1782)
at com.iplanet.am.sdk.AMObjectImpl.store(AMObjectImpl.java:1697)
... 31 more
Thanks ...

Similar Messages

URGENT. I keep getting error update 27 while trying to update my iphone 5s to 8.3!!!!

Okay first things first I already tried to update it over the air but then it got into a bootloop which means it won't go past the apple logo screen when i try to turn it on. So i got it into recovery mode and i've been given two options: to update it and retain all the content in the phone or restore it and lose everything. I'm an idiot who hasn't backed up her phone recently so i've been trying to update it but i keep getting this error! And before you tell me to do all the things listed in the apple support page under error 27, i've done them all but i still can't update my phone. help!

Hello there, ZJMEYER.
The following Knowledge Base article offer up some great steps for when you are unable to update your iOS device:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Error while trying to deploy the application (invalid AccountType).

Hello.
Error while trying to deploy the planning application (EPMA).
invalid AccountType
Rejecting Member PL_Brt_L.2.
invalid AccountType
Rejecting Member PL_Brt_L.3.2.
And not updated outline.
PL_Brt_L.2 - Account Type = Revenue
PL_Brt_L.3.2 - Account Type = Revenue
If a change to the Revenue Expence, the error goes away and the outline changes.
EPM 11.1.2.1
1-st server: planning, essbase
2-nd server: epma
3-th server: oracle db
thanks in advance

Hi,
I tried using dcmctl but still got the following error.
Oracle 8i database is running but noone is using it except that this application uses it.
Pls help
D:\oraJ2EE\dcm\bin>dcmctl deployapplication -f d:\oraJ2ee\j2ee\elink\applications\advecto.ear -
a myapp
ADMN-300075
D:\oraJ2EE\dcm\bin>dcmctl getError -v -d
ADMN-300075
Nested exception
Base Exception:
java.rmi.RemoteException:null; nested exception is:
java.lang.OutOfMemoryError
Nested exception
Root Cause: null; nested exception is:
java.lang.OutOfMemoryError
java.rmi.RemoteException: null; nested exception is:
java.lang.OutOfMemoryError
java.lang.OutOfMemoryError
<<no stack trace available>>
Thanks
Srinath

_OBJC_IVAR_$_ Referenced From Error while trying to deploy in iphone

Hi All,
I am facing one problem. any one who are aware of this project please help me.
My problem is:
i have Mac OS of 10.5.8 and xcode of 3.1.4
while i am trying to implement a application of audio files i want the frame work called "AVFoundation.Framework" i didn't found that frame work in my library.
so i added that framework from "MACOS10.4" .
but in simulator 3.1 it works fine. while trying to deploy in my iphone i am getting error like:
"-(avTouchcontroller updatecurrenttime)", referenced from:
_OBJC_IVAR_$_ avTouchcontroller._ivlmeter_in in avTouchController.o

Why don't you post here (again) and you might get some answers:
http://discussions.apple.com/message.jspa?messageID=10512489#10512489

Error while trying to deploy a cube

I am getting an error message while trying to deploy a cube. OWB Client version is 10.2.0.1.31 and the repository version is 10.2.0.1.0
Below is the piece of code that generates the error:
BEGIN
CWM2_OLAP_CUBE.ADD_DIMENSION_TO_CUBE('EXPENSE_WH', 'REL_EXPENSE', 'EXPENSE_WH', 'REL_CATEGORY');
END;
Error report:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.CWM2_OLAP_UTILITY", line 1660
ORA-01403: no data found
ORA-06512: at "OLAPSYS.CWM2_OLAP_CUBE", line 33
ORA-06512: at "OLAPSYS.CWM2_OLAP_CUBE", line 55
ORA-06512: at "OLAPSYS.CWM2_OLAP_CUBE", line 386
ORA-06512: at line 2
I would appreciate any help.

Is the dependent dimension deployed to the catalog? Generally the no data found error indicates some dependent object is missing; either an implementing table or a dependent dimension.
Cheers
David

TS3694 i just received error number 6 while trying to update to the new ios7

I just received error number 6 while trying to update to the new ios7. How do I fix this?

3194?
http://support.apple.com/kb/TS3694#error3194
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

UndeclaredThrowableException while trying to deploy EJB in WLS 6.1

I get the following excption while trying to deploy a Entity Bean
through the WLS 6.1 console:-
<Error deploying application
.\config\mydomain\applications\EnrollmentTransaction.jar:
java.lang.reflect.UndeclaredThrowableException
Can anyone throw some light on this one.
Anand
PS:- This JAR was compile using the WLS 5.1 EJBC

You'll have to show me the full error message, but you'll need to
re-compile with the weblogic.ejbc in 6.1
-- Rob
Anand B N wrote:
I get the following excption while trying to deploy a Entity Bean
through the WLS 6.1 console:-
<Error deploying application
.\config\mydomain\applications\EnrollmentTransaction.jar:
java.lang.reflect.UndeclaredThrowableException
Can anyone throw some light on this one.
Anand
PS:- This JAR was compile using the WLS 5.1 EJBC

Error code 50 while trying to download a font from adobe creative cloud

I received a error code 50 while trying to download a font from adobe creative cloud saying that the "Creative Cloud desktop failed to update" and that I should contact customer service. How should I resolve this issue?

Read here.
http://support.apple.com/kb/TS1279

App-V 5: An error was encountered while trying to stop the monitoring session

Hello,
I have a problem with sequencing an application with the App-V 5 sequencer. During the moment that the sequencer is collecting system changes an dialog box appears with the message "An error was encountered while trying to stop the monitoring session.
Please check the event log for more details.". When I sequence the same application with App-V 4.6 SP2 sequencer I have no problems.
In the eventviewer (Microsoft-AppV-Sequencer/Admin) you can see the message "An attempt to stop the monitoring session failed (startIndex cannot be large than lenght of string. Parameter name: startIndex). Event Id: 5003
I have checked the background activities, but I couldn't find anything suspicious.

Is the only difference between the platform the sequencer is hosted on the version of the sequencer? have you tested on a vanilla deployment of Windows?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

Error -4 found while trying to rÃÂ configure m'y export express first generation through windows7

Error -4 mentionned while trying to reconfigure my AirPort express 1st gen through windows 7
Look fo Ã way to succeed

Hey Michel2014,
I found an article that looks like it applies to the issue you're encountering. Check out the following resolution for when you get the message "bad param error -4" when you try to administer your AirPort Express from a Windows computer:
The issue occurs when using AirPort Admin Utility 4.0 for Windows or AirPort Express Assistant 1.0 on a computer with "Intel Centrino mobile technology" wireless capabilities. To resolve the issue:
First, download AirPort 4.1 or later. Next, try checking the Network Connection that you use to connect to the AirPort Express (usually this is your wireless connection) to ensure that it is configured via DHCP; if it is set for a static IP on a different subnet from the AirPort Express, this issue will occur.
If your issue is still unresolved, use this workaround:
Connect the computer to the Airport Express using an Ethernet cable.
Turn off wireless networking on the computer.
Set the computer to use the Ethernet port (restart if necessary).
Configure or update your AirPort Express.
After a successful update, switch from Ethernet back to your wireless configuration.
Important: Information about products not manufactured by Apple is provided for information purposes only, and does not constitute Apple's recommendation or endorsement. Please contact the vendor for additional information.
AirPort Express: "Bad param error -4" when administering from a Windows computer
http://support.apple.com/kb/TA21550?viewlocale=en_US
Cordially,
David

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator]

I got the Mac error code -36 while trying to move a backup file

I got the Mac error code -36 while trying to move a backup file (made by Time Machine) to another drive. The full text of the error message is:
The Finder can’t complete the operation because some data in “boot.efi” can’t be read or written. (Error code -36)

It's a disk error. Although Apple documentation says you should be able to copy Time Machine backups in the FInder, that doesn't necessarily mean it will work. I suggest that, instead of copying the existing backup, you start a new one on the other drive, and keep the old one. You need more than one backup anyway.

Error ORA-02375 while trying to export/import JTF.JTF_PF_REPOSITORY table

We have already created an SR, In the mean time, trying to see whether anyone else has come across this issue. Thanks.
On : 11.2.0.3 version, Data Pump Import
Error ORA-02375 while trying to import JTF.JTF_PF_REPOSITORY table
We are getting the below error while performing the full db
import.
ORA-02375: conversion error loading table
"JTF"."JTF_PF_REPOSITORY" partition "EBIZ"
ORA-22337: the type of accessed
object has been evolved
ORA-02372: data for row: SYS_NC00040$ :
0X'8801FE000004AD0313FFFF0009198401190A434F4E4E454354'
This issue is
stopping our upgrade of database from 10.2.0.4 to 11.2.0.3. This is very
critical for us to be resolved.

Hi,
seems this is Character set issue fo source and Target DB check this doc:Unable to Export Table WF_ITEM_ATTRIBUTE_VALUES due to errors ORA-02374, ORA-22337, and ORA-02372 (Doc ID 1522761.1)
HTH

I am getting an "Error 1310 message while trying to install. What can I do to fix this?

I am getting an "Error 1310 message while trying to install. What can I do to fix this?

Error "1310: Error writing to file: C:Config.Msi..."
Mylenium

Error updating DP while trying to deploy portlet

Similar Messages

Maybe you are looking for