Error updating LDAP properties: An internal error has occurred in the secLdap plugin

Post Author: kbd_vijey
CA Forum: Authentication
Hi,
We are using Environment / Tools : BusinessObjects Enterprise XI R2 ,Sun Soloris 10,Active Directory.
To Configure the LDAP, we have done from CMC - > Authentication -> LDAP.
The below steps we have followed.
1) Please enter the LDAP hosts you are using. => Here, we have entered our AD's hostname:port (Ex: 192.168.0.8:389) (Is it correct?)
2) We have passed all the required informations for all other tabs.
3) SSL - Basic(no SSL), Authentication - Basic(no SSO)
Finally its providing the error as " Error updating LDAP properties: An internal error has occurred in the secLdap plugin."
If any one have solution or faced same problem, Kindly help us to resolve it.
Thanks & Best Rgds,Vijey

Post Author: TAZ
CA Forum: Authentication
There are 3 things needed to get the LDAP plugin configured.
1) Host:port
2) Base DN, usually dc=domain, dc=com
3) LDAP Administrator DN (this is not a visible attribute in AD unless you use a tool like ADSIedit or ADExplorer). You probably have to enter the Base DN instead of the username.
There are other AD specific issues when using the LDAP plugin to AD such as picking custom attributes, rules for multi domains, etc
Regards,
Tim

Similar Messages

An internal error has occurred in the secLdap plugin - CR XI (Login to Ent)

Hi,
We recently changed the authentication type on BO XI R2 Enterprise from Enterprise to LDAP mode and have been able to add and configure all the LDAP groups. We know that the authentication is successful as users have been able to successfully login via the Infoview/CMC.
However, we are facing a problem from certian workstations (for example mine) when ever we try to login to BO Enterprise via the Crystal Reports XI client thorough LDAP as it gives the error 'An internal error has occurred in the secLdap plugin'. (PS: The Enterprise Authentication mode works) From what I have understood that this error is workstation specific as the same login is successfull from another workstation.
The CR XI client on all the workstations are of the same version (11.0.0.1282) but the Windows Updates differs. For e.g.: I have Windows XP SP 3 (with the latest of the updates with IE 8)
Is there any updates to CR XI Client to solve this issue or am I missing something here?

Your client is CR R1, your server is XI R2. This is a known bug. To fix you need BOE XIR1 SP3 or above. I'm not sure this was fixed in a CR service pack. Sorry I can't find a link for that right now.
Or use [this link|http://resources.businessobjects.com/support/additional_downloads/service_packs/crxir2.asp] to get CR R2, uninstall CR R1, and replace with CR R2. NOTE: they should still use the same license keys. If using CR to XIR2 you should always keep the same version so this is the preferred method.
Regards,
Tim

An internal error has occured in the secLdap plugin

I am facing an issue that I can not login to the BOE via LDAP authentification. The error returned in a message box is as follows:
"An internal error has occured in the secLdap plugin."
I tried to login to the Enterprise server from two different workstations, and it works fine. It happens only from a specific station, and it also means, that a different user can not login from that workstation. So I took traces of the communication between the workstation and the BOE, and found, that the LDAP bind request is successful, but the following GIOP request from my workstation
to 'ContinueLogon' is answered by the BOE with a GIOP 'User Exception'.
The exception id has a little more details and reads as follows: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
In a trace where the user logon request is answered correctly, this error returned from the BOE is not seen. By the way, I tested the same with completely disabled firewalls, did a complete re-install and SP install without success. I also tried two different product license keys. I am running on Windows XP, and Crystal Reports Developer v10 installation: CR Developer Product Version 10.0.5.1506 (Crystal 10 with SP6 (cr10win_en_sp6)).
I am out of ideas now. Any suggestions would be greatly appreciated.
Reagrds,
Christian

This error generally occurs when there is a patch difference on the client machine from the server machine.
Check the version of "secldap.dll".
1. Go to the "<installation directory of BO>:\Program Files\Business Objects\Business Objects Enterprise 11.5\ win32_x86\plugins\auth\secLDAP"
2. Right click on the file secldap.dll and go to Properties.
3. Select the version tab and check the file version.
Check the same on both the client and server machines, if it is different bring the client machine to the same patch level as of the server.
Regards,
Anisa

Account Information Not Recognized: An error occurred at the server : An internal error has occurred in the secLdap plugin.

I get the above error whenever I try to logon to InfoView. My LDAP accounts work for CMC. Any Suggestions? I read somewhere it has something to do with my dn having the following content:
distinguisheName CN=Hill\, Patrick,OU-Users,OU=GBH,OU=Facilities,DC=tenethealth,DC=net
It stated something about the CN containing slashes, commas, or spaces don't remember. Does anyone know how to fix this. I've also read it's a problem with the secLdap.dll but I haven't found any solid solution on how to resolve.
Thanks in advance,
Patrick

There was a rather old patch about this in some of the Hotfix Readme's. ADAPT00527068. Seems to affect various *nix deployments but was supposed to be fixed around the XIR2 MHF1 release. If you're on a later service pack, consider installing a sandbox and seeing if it's a regression bug.

An internal error has occurred in the secLdap plugin SunDirectory Server

We encountered this error when setting up LDAP for SunDirectory Server when following the wizard. We are using BO_XIR3.1. Any help would be greatly appreciated.

That error is very generic, you can seach KB's through SMP or open a message with support - authentication team so some tracing can be enabled to help us get a better idea of what failed.
From that error it could be anything from an unresolved host, to a bad userame, to a non-standard LDAP attribute, or something we haven't seen before.
Regards,
Tim

LDAP configuration - An internal error has occurred in the secLdap plug-in

Hi,
I am trying to configure my BOE to a LDAP (Microsoft Active Directory Application).
After completing all the configuration steps, I get the following error:
"An internal error has occurred in the secLdap plug-in"
I chose "No SSL" and "No SSO" and used all the default values in the "Please configure how new LDAP users and aliases are created by BusinessObjects Enterprise" screen.
Can someone assist?
-Doron

Hi,
I'm having the same type of problem as Doran authenticating against LDAP.
The LDAP configuration is syntactically clean, not sure whether it is correct though.
Adding LDAP groups failed miserably for all listed entries, see below in Config Parms:
Configuring without LDAP groups fails with the Login Error,
Login Error Message:               Account Information Not Recognized: LDAP Authentication could not log you on.
                                      Please make sure your logon information is correct.
                                      If your account is under any root other than dc=lgc,dc=com you must enter your dn.
                                      (FWM 00007)
The DN for my local account,
uid=hb37406,ou=people,o=hou,dc=lgc,dc=com
Crystal Report Server 2008 authenticated against an Sun iPlanet LDAP Server.
Build Date:         2008/09/13:08:31:32
Build Number:      882
Product Version:      12.1.0.882
Config Parms:
                                                LDAP Host:hourdldap01.lgc.com:389,ldap.corp.halliburton.com:389
                              LDAP Server Type: Sun Directory Server
                              Base LDAP Distinguished Name:   dc=lgc,dc=com
                                                                         ou=people,o=hou,dc=lgc,dc=com
                              LDAP Referral Credentials:cn=cmldap,dc=lgc,dc=com;
                              Password:xxxxxxxx
                              Number of Hops: 1
                              SSL authentication:Basic
                              LDAP single sign-on authentication:Basic
                              Configure new LDAP users:
                                   Assign each added LDAP alias to an account
                                   Creae new aliases only when user logs on
                                   New users are created as concurrent users
                              Mapped LDAP Member Groups
                              Add LDAP group (by cn or dn)
LDAP search on local account **
                                                            uid=hb37406,ou=people,o=hou,dc=lgc,dc=com
                                   cn=dev
                                   cn=dev,ou=group,o=hou,dc=lgc,dc=com
                                   ou=people,o=hou,dc=lgc,dc=com
                                   ou=people,dc=lgc,dc=com
                                   o=hou,dc=lgc,dc=com
                                   dc=lgc,dc=com
                                   dc=lgc.com
                                                        lgc.com
                                   ou=HalUsers,dc=corp,dc=halliburton,dc=com
                                   ou=people,dc=corp,dc=halliburton,dc=com
                                   dc=halliburton,dc=com
LDAP configuration Error:          The secLdap plugin failed to get the dn for the group xxx.

Error updating Dispute case: FDM_PROCESS_BUFFER Internal error: ENQUEUE

Whenever we clear a Disputed Invoice with an incoming payment, we receive this error message if the Dispute is unresolved: -
An error occurred during the update of case xxxxx
Update Case with Program FDM_PROCESS_BUFFER
You can start the program by running this document.
However, when we run FDM_PROCESS_BUFFER we get an error: -
Dispute Case xxxxx: Internal Error: ENQUEUE
Has anyone come across this error before? Or can anyone suggest a solution for this error given the scenario we are using i.e. clearing unresolved Disputes?
Thank you.

We have gotten this error when the status of the dispute case was "new" which is not in the range of allowed statuses allowed for the automatic change in status needed for the closure.
If we change the status to an "in processing" status the error is cleared.
Try that to see if it fixes the error.

"an unknown internal condition has occured" error msg in MAX; fieldpoint module

Hi All,
I'm trying to resolve repeated 33162 errors on my Labview system (looks like it's a problem communicating with fieldpoint modules).
I ran the MAX program to try and browse the fieldpoint controllers in the remote systems node, clicking on several of them caused
a delay then the error msg. "an unknown internal condition has occured. Possible cause unrecoverable operating system error", see
attached screenshot. I should be able to browse the devices under the remote systems node, correct?
Attachments:
max-unknowninternalcondition.jpg ‏127 KB

For any readers, I was able to solve the problem. I had to reset one of my fieldpoint modules then the problem went away. Must have been a communication problem between the PC and the fieldpoint module, so I don't see this error anymore.

This is an error from my HP scanner. How can I fix the problem? An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
Thank you

This worked for me:
"Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
"Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
I found it here:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105

How to resolve this issue in windows 7 ?? "An Internal Virtual Machine error (3) has occurred. The virtual machine will reset now."

Dear Friends,
Do kindly help me out on this issues. I have installed Microsoft Virtual PC 2007 in my PC and i am trying to create an new virtual machine for several testing. I have a clean ISO image of windows 7 . I import through Captured ISO option. The system tries
to configure the OS . But during the configuration i am getting this error.
*Your PC needs to Restart.
Please hold the power button.
Error Code: 0X0000005D
Parameters:
0x03063A09
0x756E6547
0x49656E69
0x6C65746E
An Internal Virtual Machine error (3) has occured.
The virtual machine will reset now.
I have Enabled the virtualization settings in BIOS.
Kindly help me out to resolve this issue.
Base Machine Platform : Windows 7 - 32 Bit and Windows 7 - 64 Bit.
ISO Image : windows 7 - 32 bit.

Error Code: 0x0000005D: Your
CPU is not compatible.
Ref : http://www.winvistatips.com/internal-virtual-machine-error-3-has-occurred-t520964.html
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know wha

I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know what the problem is and how to fix? Thanks.

https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

I have Maverick 10.9.1 installed I scanned a photo on my HA D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. "

After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

Error:COMMON-1: Some unexpected internal error has occured.

Error:COMMON-1: Some unexpected internal error has occured. If the problem persists please report to the Tech Support.
Error: No response from the device "a.b.c.d/161". Check SNMP communities, version or network for issues.
Above errors are seen on accessing WLC for config purpose from WCS. Seen after migrating WCS 4.2.62 to a new hardware and restoring the backed config.
OS and software versions remain the same, only new hardware is an upgraded one.
The original server is now put back in place and works .. just fine.

In this migration, everything is absolutely same except the hardware.
Same WLCs, same WCS version. IP/hostname/configs all same.

Error C1001: An internal error has occurred in the compiler.

Hello,
I'm trying to a old project (VC6++) on Visual Studio 2013.But it gives me an error i don't know how to solve.I've searched google but can't find any solutions.
Here is an error:
Error 1
error C1001: An internal error has occurred in the compiler.
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\include\mutex
46 1
Shared
Compiler Output
1>------ Build started: Project: Shared, Configuration: Release Win32 ------
1> stdafx.cpp
1>C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\include\mutex(46): fatal error C1001: An internal error has occurred in the compiler.
1> (compiler file 'msc1.cpp', line 1325)
1> To work around this problem, try simplifying or changing the program near the locations listed above.
1> Please choose the Technical Support command on the Visual C++
1> Help menu, or open the Technical Support help file for more information
1> INTERNAL COMPILER ERROR in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\bin\CL.exe'
1> Please choose the Technical Support command on the Visual C++
1> Help menu, or open the Technical Support help file for more information
2>------ Build started: Project: AIServer, Configuration: Release Win32 ------
2> StdAfx.cpp
2>C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\include\mutex(46): fatal error C1001: An internal error has occurred in the compiler.
2> (compiler file 'msc1.cpp', line 1325)
2> To work around this problem, try simplifying or changing the program near the locations listed above.
2> Please choose the Technical Support command on the Visual C++
2> Help menu, or open the Technical Support help file for more information
2> INTERNAL COMPILER ERROR in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\bin\CL.exe'
2> Please choose the Technical Support command on the Visual C++
2> Help menu, or open the Technical Support help file for more information
========== Build: 0 succeeded, 2 failed, 0 up-to-date, 0 skipped ==========
I've tried on Visual Studio 2012 successfull but on Visual Studio 2013 gives me that error.
How can i solve this ?
Thanks...
[Sorry About English]
mbpakalin.net

One thing that smells a little funny: VC6 didn't have a mutex header. Did you add std::mutex stuff as part of your porting process? If not, it is possible that the project itself has a #include <mutex> that is now resolving to the
standard library version of mutex, but was resolving to a project file in VC6.

Error updating LDAP properties: An internal error has occurred in the secLdap plugin

Similar Messages

Maybe you are looking for