Error updating message in STWB_WORK in Solman 7.1
Hi,
I'm currently testing transaction code STWB_WORK after we upgraded to Solman 7.1.
After I created a message (incident) in STWB_WORK to log an issue during testing, then I tried to change the incident, I'm getting this error
that I'm locking the record - "Transaction ".
I noticed that the record only unlocked when I go out of the test package test execution screen and back to the main test plan screen.
Any idea?
Thanks,
Tess
Hi Vikram,
Thanks for your reply. I applied sap note 1821038 including the related note 1868804, but didn't fix the issue.
As mentioned in my previous email, the incident record only unlocked if I get out of the test package where I logged (saved and closed) the incident.
(I only opened the incident in 1 session or 1 screen.)
Any other suggestion?
Thanks,
Tess
Similar Messages
-
I tried updating my Iphone4 from iOS 6.1.4 to 7 via iTunes. After downloading, I got an error 4005 message during installation and now my phone is completely wiped out; is not being recognized by my PC; and all I get on the phone is a photo of a USB plug and the iTunes symbol! Can anyone, PLEASE, help?!?
The phones in recovery mode so if yu connect it to itunes it should ask to restore it back to the last back up you have done.
that should solve it for you... -
I did the iTunes update and now I am getting a Windows error 126 message.
I did the iTunes update and now I am getting a Windows error 126 message. Now I can't use iTunes at all. Any ideas?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99606) -
What do I need to do when I go to download the new iTunes i get an error message 2330? And when I try to delete all the iTunes and other things that has to do with iTunes it will give me the message again?
Running iPhoto 9.4.3 under OS 10.8.4 "being updated" message when try to open the Application
Sounds like iPhoto is trying to update the library or thumbnails. Do the following: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.
Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again. -
Error 513 while creating support message help menu in Solman system.
Hi Expert
I am trying to create support message though help in the Solman system. But i am getting an "error 513 message has not created in the Solution manager system".
- maintained the BCOS_CUST table with RFC - NONE
- have SAP ALL authorisation
- using the transaction type SLFN for support message.
- Check the Action profile for SLF1 and found OK.
- Also refered some notes in the sap and implemented but still i am getting the same error.
Please advice.
Regards
Kumar.HI
Do u have BP existing for ur id in solman
Use BP_GEN to create bp for ur user id
otherwise using BP tcode and check if the identification tab is carrying details for solman system with curent client and userid
Hope it solv ur prb
Regards
Prakhar -
Error updating .mac message...FIx doesn't work???
I get the "there was an error updating .mac" error message when trying to publish my website. I've tried the File > Publish all to .mac route and I still get the same error message. Any ideas what I do now? Any other suggestions or alternatives?
I get the "there was an error updating .mac" error message when trying to publish my website. I've tried the File > Publish all to .mac route and I still get the same error message. Any ideas what I do now? Any other suggestions or alternatives?
-
ISE 1.2 - Error 12929 NAS sends RADIUS accounting update messages too frequently
We are currently running Cisco ISE 1.2, and every day under the "Misconfigured Network Devices" section on the main ISE Page, I have a huge list of different devices that are all being flagged with the following error message:
"12929 NAS sends RADIUS accounting update messages too frequently." " NAS sends RADIUS accounting update messages too frequently
Verify NAS configuration. Verify known NAS issues."
The list of devices seems to all be Cisco switches; albeit different models, IOS versions, ect.
i have searched on this issue, and the closest thing to a fix I can find is that it would be fixed in a WLC update, but that was 9 months ago. I would like to know what causes this issue, and what needs to be altered in ISE, or on the switches to resolve this.
Thank You.CSCuh20269 WLC sends acc updates too frequently, indicates user roams to itself is the defect specifically on the WLC that is fixed in one of the 7.6 releases.
Along with the config Jatin mentioned, you may want to try pulling an Accounting report from ISE periodically and analyze the traffic/isolate the endpoints/supplicants that may be causing a lot of activity (For ex frequent IP changes ) which results in frequent accounting updates.
Regards,
Gurudatt
Escalation engineer, SAMPG | CCIE#28227
Cisco systems -
Hello,
Running ISE 1.2.1 Patch 1, we get following error message: "12929 NAS sends RADIUS accounting update messages too frequently" on all NAS Devices (i.e. C-4500s running SPA.03.04.00.SG.151-2.SG.bin).
There was a previous post on this forum (RE: https://supportforums.cisco.com/discussion/11894006/ise-12-wlc-5508-nas-sends-radius-accounting-update-messages-too-frequently) that stated that the "aaa accounting update newinfo" command doesn't solve this problem even though bug CSCuh01760 "Misconfigured NAS criteria needs to be changed" is resolved in ISE 1.2.1 as per the release notes.
Could you please advise us on that to do now? Thank you.
Regards.For the WLC side:
1. You are probably hitting this bug CSCug14713
2. You can also change the "Interim Update" located under the SSID > Security AAA Servers
For the Switch side:
1. You might be hitting this bug:CSCuh01760
2. Make sure that you have the following command in your config "aaa accounting update newinfo"
Thank you for rating helpful posts! -
When trying to update my software, I get "an error occurred" message, and the update gets cancelled. How can I fix this?
I have found other threads with this problem. The problem is that you are using your iTunes account on another user at the same time you want to update software. Just close iTunes from that user. See > https://discussions.apple.com/thread/4577180?start=0&tstart=0
-
a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)
The linked article
http://support.apple.com/kb/TS1372
has some suggestions. Did you try doing those things? -
HT4623 When attempting to update I get an error - 37 message. What is this?
When attenpting to update to ios6 I get an error-37 message. What does this mean?
Also see
https://discussions.apple.com/thread/3375853?start=15&tstart=0 -
I want to install two update (Bridge CC and Photoshop CC (2014)
But I have a error code message : U43M1D204
I try many times to download these two update but nothing to do...Error downloading, installing, or updating Creative Cloud applications
-
Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working
Assuming that you are in Win (which you haven't said), you can try using this tool to first remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer. -
My car stereo, an Alpine CDE-121, won't recognize my iPod mini. I get an Error 02 message indicating that I need to update the iPod's software, but iTunes tells me that the software is updated.
Is this particular car stereo stated as being compatible with your iPod Mini? If you aren't sure, check the manufacturer's support site or give the car stereo manufacturer a call.
B-rock
Maybe you are looking for
-
Is there anyway to fix this, or is there a way to downgrade back to mountain lion?
-
Does my warranty cover the mac book pro charger?
I got a new Mac Book pro for Christmas and the charger already stopped working. Luckily I had an old one. Anyone know if my warrantly will cover the dead charger? Not trying to spend like 75 bucks on a new one.
-
Problems with the '.' in here documents for the ed command, bash 205
Here is a here document that should have worked: ed -s $1 << EOF 2i $2 wq EOF But the '.' triggers the shell in some way, the script works though, but i get an error message like : ./inscomment: line 31: wq: command not found ./inscomment: line 32: E
-
Can I safely plug a Mac Pro desktop, bought in America, into a UK socket?
My father bought a Mac Pro desktop from America and the cable to plug it to the electricity says 125 volts - can we plug it safely into a UK socket where the voltage is 250 volts without damaging the desktop computer, or, do we need to do something e
-
Listing 17.5 o/p abap in 21 days
Q] Please see this link http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/ch17.htm#LeavinganEvent Q] Actually I do not have a system right now could you give ,me the output of the listing 17.5 from the link below with :- i) exit uncommented .