Error updating most apps in the manager

Hi All
I noticed in Adobe Application Manager, nearly all the apps showed a status of 'Install'. I have already installed all apps some time ago.
I thought this was odd so I went into an app (premiere) and went to updates - but it said already up to date?
Thought I had nothing to lose, so I proceeded to install each app in the application manager.
Some apps installed ok, but about 6 or so had the error shown below or similair:
I did a retry, but same result
I do have a drive Z ( a network mapped drive) but my apps are stored in the default directory on drive C
Anyone know whats happening?
Chris Anderson
Exit Code: 6
Please see specific errors below for troubleshooting. For example,  ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Microsoft_VC80_CRT_x86 1.0.0.0 {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} -----------
ERROR: Error 1327.Invalid Drive: z:\
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1327.Invalid Drive: z:\
ERROR: Third party payload installer Microsoft_VC80_CRT_x86.msi failed with exit code: 1603

Refer to this:
Errors "Exit Code: 6," "Exit Code: 7"
Run the Creative Suite Cleaner Tool and reinstall.
Mylenium

Similar Messages

  • When i tried to update my apps in the app store, i coudn't update because of particular error is irritating me whenever i try to update..[There was an error in the app store please try again later.(20)] Any one suggest me to fix this error soon.

    When i tried to update my apps in the app store, i coudn't update because of particular error is irritating me whenever i try to update..[There was an error in the app store please try again later.(20)] Any one suggest me how to fix this error soon.

    Yea i deleted all the apps which was purchased earlier with old Apple id ..and nw i installed all apps with my new apple id...Tanq for helping guys (Linc Davis and Dah•veed ).

  • Why am i getting an error message that says "an unknown error has occured" when i try to update my apps in the app store

    Can someone please offer some suggestions why I am getting an error message that says "an unknown error has occured" when I try to download or update my apps in the app store?
    Thanks!
    disregard! i noticed someone else's post about signing out of the app store and signing in again and it worked.....

    Hi ...
    Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
    If that doesn't help, drag the App Store icon straight up off your Dock so it goes, "poof".
    Now drag the App Store icon from your Applications folder to the Dock. Try updating your apps.

  • I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to l

    I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.

    Davinci thank you for the update.
    Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder.  Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool.  You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.  After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
    The CC Cleaner Tool is designed to be used after running the uninstallers.  Without running the uninstallers first then a complete removal may not be possible.

  • When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)"  I have tried many many times and keep getting the same message.  How do I resolve?

    When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)"  I have tried many many times and keep getting the same message.  How do I resolve?

    First take the steps recommended in this support article. If there's no change, continue as follows.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Cookies/com.apple.appstore.cookies
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • An unknown error message appears when I try to update an app from the app store

    Beginning about a week ago, I get the message "an unknown error occurred" when I try to update an app from the app store on my iPhone 4s. The same update works fine on my iPad 2.  Resetting does not solve the problem.

    try updating on your PC with itunes, then sync your phone to your pc.

  • When i try to update an App through the App store it gives me a Unable to Download application error. What's the solution?

    When i try to update an App through the App store it gives me a Unable to Download application error. What's the solution?
    This only happens when i try to update, but if i download a new app, it doesn't give me this error.

    Click here and request assistance.
    (77051)

  • HT204053 When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

    When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

    1. Launch the App Store
    2. Select Store->Sign Out
    3. Select Store->Sign In and replace the Apple ID with the one you want to use

  • Why can't I update/ download apps from the app store after upgrading to iOS 7.0.3?

    I have an iphone 5 and updated my phone to the lastest version (ios 7.0.3) last night. I can't download/ update any apps from the app store using my cellular network.  The only error message is that the app cant be downloaded at this time. As soon as I click the download button, the image of the icon shows up with "Waiting" underneath the icon.  I tried tapping on the app icon to pause the download but that isn't working. I have disabled Wi-Fi setting and enabled"the use cellular data" option in the itunes and app store setting page.  Memory is not an issue because I have a lot of memory available.  In the cellular setting page the App Store is enabled to use cellular data.  It seems like it is a setting issue.  What can be done to fix this problem

    Thanks for your suggestion.  Not long ago before I saw your response I tried to download the app and I seemed to have some progress (I had 5 bars and 1x). It looked it was 3/4 of the download complete only to have the same error message. 
    Since then I reset the phone and I have tried downloading the app when there 5 bars with 3g.  Every time the icon has waiting underneath it and I get the same error message. 

  • Error - Update Product Data in Solution Manager

    Hello,
    We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
    Error : Update Product Data in Solution Manager
    Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
    Any information is highly appreciated. Thank you.

    Hi Jaypee,
    Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
    Extract from this guide for this problem:
    Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
    Thanks
    Sunny

  • Customize "Please update your app from the App Store" message

    Please add the possibility to customize/change this message for the branded adobe viewer to include direct link to the app:
    "Please update your app
    This issue is available for download,
    but requires a newer version of the
    app. Please update your app from
    the App Store."
    Thank you,
    Gennady!

    Himanshu,
    This just happened to me today with the Adobe Content Viewer and a v22 published app.  I updated a folio which was created a while back that was set to "Unspecified" for Viewer Version.  It was created originally with pre v20 tools.  In both the ACV and a published app this folio showed that "Please update your app..." message when trying to download/view the updated version of the folio.  When I got the first update message I was viewing the folio, then I affirmed that I wanted to download the update so it took me to the library view.  After trying to initiate the download/update it shows the "please update" error message.  I tapped "OK" and then it let me download and view the updated folio.  Basically it's showing an error message that doesn't apply.  We know it isn't a v23 folio trying to be viewed by a v22 app because my folio version is not even v20, and also because it still lets me download/view the update after it gives the warning.  When I've made the mistake of trying to view a newer folio with an older viewer in the past it doesn't let me download/view the new folio, it just gives the error message.  Every time I've observed this false error message I've been viewing a folio when I got the initial alert that an updated folio is available.  This may or may not be significant/relevant.
    Andrew

  • Please update your app from the App Store

    Hi,
    Is it possible to customize/change this message for the branded adobe viewer to include direct link to the app, please:
    "Please update your app
    This issue is available for download,
    but requires a newer version of the
    app. Please update your app from
    the App Store."
    Thank you,
    Gennady!

    Himanshu,
    This just happened to me today with the Adobe Content Viewer and a v22 published app.  I updated a folio which was created a while back that was set to "Unspecified" for Viewer Version.  It was created originally with pre v20 tools.  In both the ACV and a published app this folio showed that "Please update your app..." message when trying to download/view the updated version of the folio.  When I got the first update message I was viewing the folio, then I affirmed that I wanted to download the update so it took me to the library view.  After trying to initiate the download/update it shows the "please update" error message.  I tapped "OK" and then it let me download and view the updated folio.  Basically it's showing an error message that doesn't apply.  We know it isn't a v23 folio trying to be viewed by a v22 app because my folio version is not even v20, and also because it still lets me download/view the update after it gives the warning.  When I've made the mistake of trying to view a newer folio with an older viewer in the past it doesn't let me download/view the new folio, it just gives the error message.  Every time I've observed this false error message I've been viewing a folio when I got the initial alert that an updated folio is available.  This may or may not be significant/relevant.
    Andrew

  • Im trying to update my apps from the ipad in the app store section and when i press update the ipad tells me that im not connected to the itunes store??

    Im trying to update my apps from the ipad in the app store section and when i press update the ipad tells me that im not connected to the itunes store??

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already login with my own Apple ID.

    I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already log in with my own Apple ID.

    Just now you said the other Apple ID stored inside it, is that mean all my data back up in that the other ID?

  • When i try to update my apps from the app store some of the apps wont update and ask for an Apple ID that isn't mine. Whats the problem and how do i fix it?

    When i try to update my apps from the app store some of the apps wont update and ask for an Apple ID that isn't mine. Whats the problem and how do i fix it? All im trying to do is update my apps and its asking for these random apple ID's.

    The apps were purchased by another user with a different Apple ID. You will have to erase them and repurchase them using your Apple ID.

Maybe you are looking for

  • Inspire T5900 Sound Problems

    Hi I have a problem with my T5900 speaker system, but cannot find any threads that list this product. I have this connected to my PC through a Sound Blaster Xi-F card. We use an ION Profile Pro vinyl record decks to play the records and also to conve

  • How to set the default location of a new window in Preview?

    Opening a new document in Preview always results in a new window that is located at the upper left of the screen. I'd like to have all of my Preview documents open in a second monitor, but this doesn't appear possible. Does anyone have any insight to

  • Jtapi/java get phone description

    HI, I developed a jtpai application that view a list of all phones(MAC Address) registered on CallManager. How can I view the phones description? Regards.

  • How to delete variant form background job

    Hi, I have one background job with 5 variants associated with iy. Now i want to remove 2 variant from that background job. is it posible??? if yes then how to do that? Thanks,

  • Why do I get a cracking/popping sound when recording?

    Ever since I updated to OSX Mountain Lion, I am having trouble with Garageband. The issue is that as soon as the sound starts to build up, then the cracking and popping sounds begin, interrupting the recording. I use two types of microphones, the M-A