Error "Updating Respository" from MDM 5.5 to MDM 7.1
Hi all,
We have been using MDM 5.5 SP 6 for the last 2 years; right now we have a Sandbox environment (MDM 7.1 - 7.1.02.59) to check compatibility with our developments.
We unarchive the repositories in Sandbox and "Update Repository" for each one, 4 of our 7 repositories works without problem in this option, but 3 of them display the message "Error Updating Database Schema", we cant find any logs where describes the step that is trying to do.
Does anybody know which can be the problem?
To explain more of the background installations:
- MDM 5.5 is working with SQL 2005
- MDM 7.1 is working with SQL 2005
- The username that we use to Update all repositories is the same, so it's not a problem of authorization
Thanks for your help.
Hello,
The log you have mentioned is the complete log or only a part of it.
This seems to be problem from MDM side.
I'm sure you have followed all the steps, still for my reference would appreciate if you could verify them
take a fresh archive of the repository from 5.5,
transfer it in the Archive folder in the MDM Distribution folder
un-archive in the Console.
Update the repository (This where the error is ??)
Load the repository using updated indices
It will be helpful if you raise it with SAP an OSS message.
Regards,
Abhishek
Similar Messages
-
Error updating Portal from SP13/14 to 15 - SAP_JAVASL - Server in Safe Mode
Hi Experts
while updating the Portal 7.0 from mixed state 13/14 to SP15 the JSPM finished (all components marked as deployed) but the server didn`t come up after hours.
Exit JSPM - Relogged into JSPM - Only JSPM was marked as deployed-
So I Deployed again - Kernel was deployed but in Component SAP_JAVASL another error occured:
"cannot update sdm"
action_auto_update
SAP_JAVASL
Server is in SAFE MODE
Actual SDM Heap is 512 MB
J2EE Engine runs in "safe mode"
Developer Tracce of SDM -
SDM Server STOPPED
[Thr 4516] Sat Jul 12 14:58:13 2008
[Thr 4516] JLaunchRequestFunc: receive command:17, argument:0 from pid:1120
[Thr 4516] JLaunchIShutdownInvoke: set shutdown interval (stop:1215867493/end:1215867613/TO:120)
[Thr 4516] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 4516] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 4516] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4516] JLaunchISetState: change state from [Initial (0)] to [Stopping (5)]
[Thr 4296] Sat Jul 12 14:58:14 2008
[Thr 4296] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 4296] JLaunchCloseProgram: good bye (exitcode = 0)
I tried to switch off the "safe Mode" via Visual Admin - but nothing changes (still in safe mode)
Any ideas - helpful answers - please help!!
kind regards
TomTom,
Follow the below steps:
1. Stop manually the JSPM process.
2. Start the Config Tool script file from the /usr/sap/<SID>/<instance name>/j2ee/configtool/ directory.
3. From the menu choose "File" --> "Safe Mode". A dialog box appears.
4. Choose "No" from the "Safe Mode Enabled" drop-down list.
5. Choose "OK".
6. Save the settings and confirm all the messages that are displayed.
7. Restart the J2EE Engine.
Check out this SAP Note for more information:
Note 985496 - JSPM: problem during start/stop engine in SAFE/None mode
Regards,
Karthick -
Error updating vendor from SRM to SUS
Hi All
We are using SRM 4.0 in Extended classic scenario, alongwith SUS.
We have a nightly batch run & vendor changes from ECC are updated in SRM.
For Vendors marked as Portal vendors, there is a real time interface between EBP and SUS (thru XI), which updates the vendor in SUS.
However some of the updates are failing in SUS. The error message in SXMB_MONI, trace is as follows.
<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:R1:479 -Address still in use; change to validity not allowed Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
We are not able to determine which address and how exactly it i in use??
Regards
KedarThanks for the Reply
When I restarted the messages in SXMB_MONI, the errors have gone now, but I still see failures in SLG1.
here is the complete description:
Don't know if it is processed or not?
Address still in use; change to validity not allowed
Message no. R1479
Diagnosis
You have attempted to restrict the validity period of a BP address. However, this BP address is still being used, which means that you cannot make this change.
System response
The system issues an error message. The validity of the address is not changed.
Procedure
Display the where-used list for the BP address. If you still want to change the validity of the address, then change the address reference for the applications in question.
In most cases, if other applications are affected, you can navigate from the where-used list directly to the corresponding application in which you call up the context menu.
Then try again to change the validity of the BP address. -
Error updating BIOS from Windows Vista: error -15. Satellite a215-s7437
I've tried to update the BIOS of this laptop which currently runs version 1.2, when the latest version is 2.0. When I run the BIOS update from Windows Vista, it fails with error code -15, with a message similar to "current BIOS checksum fail". The laptop was bought in Spain. Any ideas? The knowledge base was completely useless for this issue. Pedro.
Does the computer still work at this point?
-
Error : update record from wizard
i m trying to build 3 page registration for my website using Developer Toolbox. First i insert records using Insert record from wizard and in the next step i want to update the same record(in the first step i m having upload and resize image). how to get the last insert id and pass the id to URL so that i can retrive the last insert id from the URL and update the same record... somebody please help me....
Thanks
Priya_BaerPlease have a look at the thread I WANT THE RESULT PAGE OF MY INSERT FORM TO BE AN UPDATE FORM OF THE JUST INSERTED DATA where a solution (based on attaching the "last insert id" value to a Session Variable) has recently been provided.
Cheers,
Günter -
Error Updating Photoshop from Creative Cloud App Manager
ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Required/Plug-Ins/Extensions/FastCore.plugin/Contents/CodeResources"(Seq 2)
http://forums.adobe.com/message/4666152
-
Error while updating data from PSA to ODS
Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo -
Error publishing from Muse - "error updating device redirect setting"
After recent upgrade of Muse I am getting an error message when publishing. The pages are published correctly but there is an error which prevents the final completion of the process. message = "Error updating device redirect settings click resume to try again." it never works. What is up? is this a Business Catalyst error or a a Muse error?
I turned off the firewall, logged out from Creative Cloud and restarted my computer. After rebooting, I logged in to Creative Cloud, open Muse and connect to Business Catalyst without no problem,
-
I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.
Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.
-
Error while copying Update rules from One Cube to other
I am getting the following error message while I was trying to copy an existing update rule from an existing InfoCube to a New InfoCube. Has anyone experienced this before? Please let me know how to resolve this.
Formula 3ZKQ....... (Object version M) could not be read.
The new and original cubes are custom cubes.
Thanks!Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps... -
Error when updating pages from template
When updating pages from a template I have been occasionally
getting this error message:
While executing onLoad in Swap Image.htm, the following
JavaScript error(s) occured:
At line 325 of the file "Hard Drive: Applications: Macromedia
Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
Reference Error: createObjRefs is not Defined
I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
Any ideas on how to fix this?
Thanks,
PaulWhen updating pages from a template I have been occasionally
getting this error message:
While executing onLoad in Swap Image.htm, the following
JavaScript error(s) occured:
At line 325 of the file "Hard Drive: Applications: Macromedia
Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
Reference Error: createObjRefs is not Defined
I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
Any ideas on how to fix this?
Thanks,
Paul -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea? -
Error updating adobe download assistant from version 1.0.6 to 1.2.9
i am getting an error updated adobe download assistant from version 1.0.6 to 1.2.9. "The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.
Sammybobammy89 what Adobe software title are you trying to install? To resolve your current error remove version 1.0.6 prior to installing version 1.2.9.
-
Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13
Hi all,
I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
Similar to copying update rules in 3.5 I tried
- right click on "ZSD_C13"
- choose Additional Functions - Create Update Rules"
- choose DataSource: ODS Object "ZSD_O03"
- choose Copy from: InfoCube "0SD_C13"
This result in the error "0SD_C13 is not suitable as a template for copying update rules".
Some hints that might help:
1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
- This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
- This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
Thanks a lot,
WernerHi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps... -
I downloaded Lion and have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?
What type of Internet connection do you have? How fast is it?
Maybe you are looking for
-
I want to reset all networking on my Macbook Pro with 10.5.6 to fresh start
I installed Log Me In on my Macbook Pro, and now I can't see the other PCs on my network, they don't show in my shared area in Finder, and iTunes is having a hard time to find my music on the network. I tried with both wired and wireless. I uninstall
-
Cannot Connect to Mac App Store
When I open the MAS, I get a "Cannot Connect to the App Store" alert in the window. When I try to signin, I receive a red "Connection failed" message in the signin dialog box. When I go to Software Update from the Apple Menu, I receive a notice that
-
How can I add an event to my calendar that occurs every third day?
-
Looking for experienced insight...
My iPod has been working fine for months now...then 2 days ago I notice that there is a new upgrade for the iTunes store...I downloaded the 7.2 iTunes store upgrade...Now I can't get anything but this message "iTunes has encountered a problem and nee
-
Whenever i tried to open the photos in iphoto it return with the message "the error occured with the publication of the album". can anybody please help me? Thanks