Error updating software with version 1.1.3

i found the article that says if you get error 1602, to uninstall itunes and apple mobile device support and then reinstall itunes. and i did exactly that. but im still getting the same error! im just trying to update the software so i can get the january software upgrade... can anyone help??? i read somewhere in a discussion about re-downloading version 1.1.3 because the original file could be corrupt. is that the solution? if so, how do i do that?
i tried restoring the itouch but it attempts to restore it with the 1.1.3 software, which has failed over and over.
any help would be greatly appreciated! :]]]

Ok to find the corrupt file go to here: (windows xp)
C:\Documents and Settings\(YOUR USER NAME)\Application Data\Apple Computer\iTunes\iPod Software Updates
delete the iPod1,11.1.3_4A93Restore.ispw file (Its about 170MB)

Similar Messages

HT1338 I have version OS X 10.6.8, should I update software with Lion or Mountain Lion ??

I have version OS X 10.6.8, should I update software with Lion or Mountain Lion ??

Read this for apps that are lost whe you go to Lion: http://roaringapps.com/apps:table
But you have more options that you suspect, I think.
You can clone (CarbonCopyClone, $40 download) your drive to an external. This is wise before any upgrade to be able to recover if the upgrade fails.
But also you can keep a SnowLeopard external drive to run your older apps and to preserve your "fallback" in case you decide to go back (I am *not* bashing Lion or ML, just saying some people do want to go back).

I just updated Safari with version 5.1.10 and now I cannot use "open location". Anyone else having this problem and are there any solutions?

I just updated Safari with version 5.1.10 and now I cannot use "open location". Anyone else having this problem and are there any solutions?

Ok ...
Try troubleshooting extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

HT1766 after updating software with the device locked with passcode, the device not opening

after updating software with the device locked with passcode, the device not opening

Hello 7000q8,
Enter in your Defualt Passcode then it should unlock, If not then contact Apple.
^Connor

Just updated software with OS Snow Leopard. Now I get a plug-in error and cannot access internet show. Any thoughts?

Hi. Just updated software and now get a plug-in failure message when trying to watch internet show. Any thoughts?

SavhStudent wrote:
I've discovered that all of these applications (programs) are PowerPC and are not supported within OS X Lion. Is there a Rosetta plug-in that one can get? Any news about Apple updated Lion to include one? Any other things I can try?
There is now and will never be any way for PowerPC apps to run on Lion.
You'll need to go back to Snow Leopard.
Call Apple and ask for a refund on your Lion Purchase

Errors Updating App with Application Loader

I have an app that I transfered in on itunes Connect and I am now trying to update it with a new version that I have created in Indesign.
The App version was 1.1 and the next version i want is version 2.0
Adobe have bumped up my app to version 2.0 for me so it shouldn't error when I try to udate it but I'm still getting errors when uploading the .zip file to the application loader. See screenshot...
Is there something I should have done once adobe bumped up the version?
I'm at a bit of a loss as to what to do next. Any Suggestions?

Hi Neil,
Well, I'm experiencing the same problem as everyone.
We contacted gold support, and told us that it was a known issue and being investigated. The Bug number is 3632264. Any updates?
So, I tried tweaking App Loader and App Builder for the "version mismatch" and I think I solved it. However, the only problems left are the one's below. What do I do next?
Thanks!

Error updating to new version

Hello, I have a prs-t1, ver 1.0.0.3.11140. I wanted to update the software because I'm getting too many problems while reading an ebook. Like the reader stopped working and so on. I tried to update to the new version, but I get the error ""Update isn't complete. Please try again" is displayed." and after trying the solution given in the site, I keep getting the same error. I downloaded the version for Win 7 64bits and proceed as explained in the site. Followed the instructions to the T, same error. Can anyone help me please?

Hello,
Welcome to the User Discussion Forums.
If [url=http://esupport.sony.com/US/p/swu-download.pl?mdl=PRST1&upd_id=7365&os_group_id=6:22h8q2mk]1.0.04.12210[/url:22h8q2mk] will not install, is your Reader fully charged? do you have a security software running during install? any resident security programs may firewall or interrupt your installation and cause errors. Anything beyond this, we recommend calling in for deeper triage.
http://esupport.sony.com/US/p/support-i ... nfo_id=932

Cannot update software from version 1.0 after factory reset

Just did a factory reset on my first generation, year old, perfectly working AppleTV. Then wanted to update the software from ver. 1.0 to current. For two day now, when choosing "update software' the response is that newer software is available but the download spins and spins with nothing happening. Seems like the network connection must be good or there wouldn't be knowledge that newer version exist. Eventually a message states that the software is not available now try late. As I said, I have been trying for 2 days. What's up with this?

Self-repaired! It was appear that the quality of reception of the ATV is problem because it cannot hold a connection long enough to download the software. I took an 11n airport express which extends my airport network and plugged the ATV to in by Ethernet. Result. ATV showed up on iTunes. Upgrade to 2.2 downloaded. And since I only stream, the system seems faster and more solid, so far. Amazing.

Error updating software macbook air

Just bought a Macbook air. I tried to update software after 2 hours downloading time and two tries get an error message.
What can I do? return the device?
Thank you

Apps such as Little Snitch, Net Nanny, and Hands Off can prevent software updates from downloading.
Same for third party download managers.
Some security software such as Virus Barrier even though temporarily disabled can still prevent software from updating successfully.

Error updating software

Unable to update software on 3GS iphone. Error message "downloaded file is corrupted"

There are many possibilities. Try disabling your security software before downloading the update for a start.
Is there an error number? If so look it up here: http://support.apple.com/kb/TS3694

How to update software with E71 directly?

I checked the instructions on the net but I dont understand them (see below).
Can some one help with this?
I have a Apple OSX so PC Suite is out.
Bluetooth connection between E71 & Apple laptop gets quite often into an endless disconnecting loop and I have to reboot both E71 and Apple laptop. Does newest E71 update help with that?
How do I use my device to update?Tip: It is always recommended to backup your data before updating your software. However, updating using your device does not necessitate a full backup.Step 1 Step 2 Step 3 Key *#0000# into your phone's home screen or go to Device manager(consult your user guide if necessary) Select Options > Check for updates. Follow the on-screen prompts until your update is complete!The above instructions may not apply to all devices. For detailed instructions on updating your particular device, please select your model on the Device software update page.

FOTA is not available on the E71 so it cannot be updated directly.
On paper the E71 is compatible with FOTA but no FOTA updates have ever been released for an FP1 based device.
The only options are to do the update on a friends windows based PC or get it updated at a nokia care point. Nokia has never offered mac support for updates so it is not possible to update using the mac OS.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.
Message Edited by psychomania on 20-Aug-2009 10:19 PM

Updating software with MAC

I have a MAC and I need to update my software (I currently have v4.3.9127) and need to update software due to my texts and call logs automatically deleting once a day. Any suggestions?

I don't think it's possible. Apparently they have monkeys working in the RIM Apple department..

Trouble watching WWDC online with all current updated software and versions..help, Trouble watching WWDC online with all current updated software and versions..help

I have updated everything and I am trying to watch the WWDC online and it keeps playing Matt and Kim "Lets Go!" and not allowing me to watch. Does anyone have any suggestions as to why this is happeneing? I am already using Safari version 5.1.9 and my mac is running version 10.6.8. Any suggestions?

I'm stuck at the copyright screen with a sound track on my iMac with 10.6 and Safari 5.1.8.
Just tried from my wife's newer iMac with 10.8 and it's working although with a lot of stutters, even though we have 50MBps cable internet.
Overloaded servers?
EDIT: Now it's not working on the newer iMac either. Up, down, up, down...

HT1338 how to update software with error message?

I recently bought my computer from best buy as an open box item. I am trying to get the software update so i can have the ilife applications. once the download is complete and it says install, it says none of the items are able to install, what else could i do?

Go back to Best Buy for help.

Error updating software on OL6.3 due to package conflict

Hi, noob here.
I recently installed OL6.3 (in a VirtualBox VM). The install went well.
However, when I try to update the OS via Software Update, I get an error as follows which prevents any of the 748 updates being applied.
Test Transaction Errors: file /lib/firmware/isci/isci_firmware.bin from install of kernel-firmware-2.6.32-279.9.1.el6.noarch conflicts with file from package kernel-uek-firmware-2.6.32-100.34.1.el6uek.noarch
Any ideas?
thanks...

Here's what I get from yum update with just the one repo in yum.repos.d:
Finished Dependency Resolution
Error: Protected multilib versions: 1:cups-libs-1.4.2-48.el6_3.1.i686 != 1:cups-libs-1.4.7-1.x86_64
You could try using --skip-broken to work around the problem
** Found 12 pre-existing rpmdb problem(s), 'yum check' output follows:
audit-libs-devel-2.1-5.el6.x86_64 has missing requires of kernel-headers >= ('0', '2.6.29', None)
1:cups-libs-1.4.7-1.x86_64 is a duplicate with 1:cups-libs-1.4.2-39.el6.i686
glibc-headers-2.12-1.25.el6.x86_64 has missing requires of kernel-headers
glibc-headers-2.12-1.25.el6.x86_64 has missing requires of kernel-headers >= ('0', '2.2.1', None)
libcap-ng-devel-0.6.4-3.el6_0.1.x86_64 has missing requires of kernel-headers >= ('0', '2.6.11', None)
libdrm-devel-2.4.23-1.el6.x86_64 has missing requires of kernel-headers >= ('0', '2.6.27', '0.144.rc0.git2.fc10')
libgcrypt-devel-1.4.5-5.el6.x86_64 has missing requires of libgcrypt = ('0', '1.4.5', '5.el6')
msttcorefonts-2.0-1.noarch has missing requires of /usr/sbin/chkfontpath
xdialog-2.3.1-3.el5.x86_64 has missing requires of libgdk-1.2.so.0()(64bit)
xdialog-2.3.1-3.el5.x86_64 has missing requires of libglib-1.2.so.0()(64bit)
xdialog-2.3.1-3.el5.x86_64 has missing requires of libgmodule-1.2.so.0()(64bit)
xdialog-2.3.1-3.el5.x86_64 has missing requires of libgtk-1.2.so.0()(64bit)

Error updating software with version 1.1.3

Similar Messages

Maybe you are looking for