Error updating SPAM
Hi,
Updating SPAM to patch SAPKD64036 I get the error message:
Retcode 1: error in DDL statement for VE071LOCKFLAG - repeat
Error 1031-ORA-01031: insufficient privileges when executing ADD-FIELD of
Error VE071LOCKFLAG when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of VE071LOCKFLAG
Any idea?
Regards.
Hi,
Please let us know which version of oracle you are running. Assuming it
is 10, please review the following notes :
- 1028220 - ORA-01031: Insufficient privileges despite SAPCONN role
- 985607 - ORA-01031 Creating views after upgrade to Oracle 10g;
It is probable that the database user does not have required privileges.
After executing SAPCONN_ROLE.SQL, restart the SAP system. Otherwise, the
connected WP still will use the old authorizations.
After you try the above, continue the SPAM import again.
Aidan
Similar Messages
-
Dear All,
while i am updating spam / saint in saint t code I am facing an error TP_INTERFACE_FAILURE and reason for the error is TP_CANNOT_CONNECT_SYSTEM
the error details are
The installation was stopped, since an error occurred during the phase
CHECK_REQUIREMENTS, which the Add-On Installation Tool is unable to
resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code:
- Error message: TP_INTERFACE_FAILURE
Notes on phase CHECK_REQUIREMENTS
n this phase the system checks the various requirements for the add
nstallation. The following are reasons why this phase may fail:
TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the system
database.
Check the action log (in the menu, choose Goto -> Action Log). Y
may be able to use the detailed tp error message in this log to
identify and remove the cause of the error.
QUEUE_NOT_EMPTY: There are still OCS requests in the transport
buffer which are not completed. You can show these requests with
following tp command:
tp SHOWBUFFER <SID> -DSOURCESYSTEMS= TAG=SPAM
These requests have to be completed or deleted from the buffer
before you can continue importing the queue.
o CANNOT_DROPBUFFER: tp cannot delete old, incompletely processed
Support Packages from the tp buffer.
Check the action log (in the menu, choose Goto -> Action Log). You
may be able to use the detailed tp error message in this log to
identify and remove the cause of the error.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
please help me, its very important to complete this job i am in a critical position
Thanks
SenthilDear,
Please refer these links,
tp_cannot_connect_system
Problem loading a package in the SAINT transc. (TP_CANNOT_CONNECT_SYSTEM)
Regards,
R.Brahmankar -
Error in Spam / saint update TP_STEP_FAILURE and DDIC_ACTIVATION
Dear All,
While updating spam/ saint update I am facing this error
Details of Error:
The installation was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: tp step A, return code
0008
Notes on phase DDIC_ACTIVATION
In this phase the system activates the imported Data Dictionary objects.
This phase may terminate for several reasons:
o TP_INTERFACE_FAILURE: The system was unable to call the tp
interface.
o TP_FAILURE: The system was unable to execute the tp program. For
more information, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: The system was unable to perform the tp step DDIC
activation successfully. To see the cause of the problem in the
activation log, choose Logs.
If you import two or more OCS packages in one installation queue,
and activate the Data Dictionary objects in the incorrect sequence,
this can cause errors. In this case, the activation errors disappear
if you repeat the activation run. To do this, choose Continue.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Please help me
Thanks
SenthilHi,
i am having the same problem with SPAM
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPKA70012, tp step A, return code
0008
however i dont have the option to continue.. Please help
thanks -
Hi,
I got an error during spam update. The version is ECC 6.0. It got terminated during the phase IMPORT_OBJECT_LIST. how it can rectified.
Pls help me in resolving the issue.
Regards,
KrisHi,
ERROR: No connect due to DbSl Load Lib Failure
ERROR: environment variable DIR_LIBRARY is not set.
ERROR: Connect to DEV failed (20071118181034).
This is the error i got when i checked the tp log
can any one suggest a resolution?
Regards,
Kris -
Problem updating spam/saint
Hi all,
While updating spam/saint i m getting following error.
- Error in step: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0212
Any idea how to resolve this. This system is connected to another system in tms , the latter being domain controller. The tp versions in these 2 sys are diff. Can this be the prob..
Any suggestion?
Thanks,
AjithHi,
You didn't say what system you using ? Anyway, go into SM59 and find the RFC connections used for TMS(usually two) under ABAP connections, try do a connection test, is it successful ? ..if not check technical settings are correct.
See note 96907 for further troubleshooting.
Nelis -
How long may it take to update SPAM/SAINT?
Hello,
I'm updating SPAM/SAINT Update - Version 700/0027; it has run for a long time during DDIC Activation. How long may it take for the whole process of update of SPAM/SAINT?
Thanks and regards,
SaidDear Sayid ,
SPAM update generally not took tooo much time , in your case please check the log in
\usr\sap\trans\log for better understanding , there you can track the changes / update / error .
Hope this input help you to track / solve issue .
Regards ,
Santosh -
Updating SPAM : Warning , No Response
While Updating SPAM on my IDES SAP ECC 6.0 server , i got this error log and the update process doesn't respond at "DD IMPORT finished with returncode 4" . Here is the error log file .
Sat Oct 20 00:56:08 2007
Trace File of External Event Raiser (Level=2, Append=0)
EventID: SAP_TRIGGER_RDDIMPDP
SAP message server host: sdisvr36
SAP message server service (new): 3900
SAP message server service (old): sapmsS36
MsIAttachEx: connect to sdisvr36 / 3900
NiIInit: allocated nitab (2048 at 00EDB080)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiPGetNodeAddrList: got 1 interface(s) from operating system
[0] IP-Address: 192.168.1.36
NiHsLGetNodeAddr: got hostname 'sdisvr36' from operation system
HN='sdisvr36'; Add[0]=192.168.1.36
NiIGetNodeAddr: hostname 'sdisvr36' = addr 192.168.1.36
NiIGetServNo: servicename '3900' = port 0F.3C/3900
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 3948 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIConnectSocket: hdl 0 is connecting to 192.168.1.36:3900 (timeout=5000)
Sat Oct 20 00:56:09 2007
SiPeekPendConn: connection of sock 3948 broke (10061-WSAECONNREFUSED: Connection refused)
NiHsLGetHostName: found address 192.168.1.36 in cache
NiIGetHostName: addr 192.168.1.36 = hostname 'sdisvr36'
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2764]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 3948
(SI_ECONN_REFUSE; I4; ST; 192.168.1.36:3900) [nixxi.cpp 2764]
NiICloseHandle: closing initial hdl 0
ERROR => MsIAttachEx: NiBufConnect to sdisvr36/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
ERROR ***: MsAttach (host=sdisvr36, serv=3900), rc = -100
MsIAttachEx: connect to sdisvr36 / sapmsS36
NiHsLGetNodeAddr: found hostname 'sdisvr36' in cache
NiIGetNodeAddr: hostname 'sdisvr36' = addr 192.168.1.36
NiHsLGetServNo: got service name 'sapmsS36' from operation system
SN='sapmsS36'; Port=0E.10/3600; PC=tcp
NiIGetServNo: servicename 'sapmsS36' = port 0E.10/3600
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 3948 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIConnectSocket: hdl 0 is connecting to 192.168.1.36:3600 (timeout=5000)
Sat Oct 20 00:56:10 2007
SiPeekPendConn: connection of sock 3948 broke (10061-WSAECONNREFUSED: Connection refused)
NiHsLGetHostName: found address 192.168.1.36 in cacheReturn code 4 is a warning so you should be able to proceed. Did you restart the SPAM import process (just re-run transaction SPAM and restart the import from the menu)? Having to restart the SPAM import is fairly common.
Hope that helps.
J. Haynes
Message was edited by:
Joe Haynes -
No DDL commands found for activation while updating SPAM/SAINT
Hi,
Hi,
While updating SPAM/SAINT version 0053 (SAPKD70053) we are getting
error in activation.
If we check the logs we found error related to no ddl command found for
activation
No DDL commands found for activation of /SDF/SWCM_PAT03D
No DDL commands found for activation of /SDF/SWCM_PAT03P
No DDL commands found for activation of /SDF/SWCM_PAT03Q
No DDL commands found for activation of CLNT_CVERS
No DDL commands found for activation of CLNT_CVRS2
No DDL commands found for activation of CVERS_SUB
No DDL commands found for activation of PAD03
No DDL commands found for activation of PAT05
No DDL commands found for activation of PAT06
No DDL commands found for activation of PAT09
No DDL commands found for activation of PAT10B
No DDL commands found for activation of PATPRDVRS
No DDL commands found for activation of PATRTVERS
No DDL commands found for activation of PATSWFEATR
No DDL commands found for activation of PATSWFTINC
No DDL commands found for activation of PRDVERS
No DDL commands found for activation of STACKCOMPS
No DDL commands found for activation of SWFEATURE
No DDL commands found for activation of SWFEATUREINC
No DDL commands found for activation of TECHUSAGES
No DDL commands found for activation of TFDIR_INIM
No DDL commands found for activation of TRBAT3
We try to activate the table but were not able to activate it.It giving message that Table cannot be activated.
Attaching the error log files
System Details:
SAP NetWeaver 2004s
Database: DB2 10.5
Can anyone help us in thisHi Amit,
From the logs you attached
2WETP000 13:44:36: Retcode 1024: error in DDL statement for "CLNT_CVRS2 " - repe
2WETP000 at
2EETP345 13:44:48: Retcode 1024: SQL-error "-601-SQL0601N The name of the object to be created is
2EETP345 identical to the existing name "SAP<SID>.CLNT_CVRS2" of type "VIEW". SQLSTATE=42710" in DDL
2EETP345 statement for "CLNT_CVRS2
Can you check in database for the existence of the object.
Also what is your kernel level ?
Regards,
Deepak Kori -
Hello everyone, I update SPAM (KD70037), the old version is KD70026, in the step current action: SPAM update import , spent about six hours, Not completed,is normal? , The system no error message. SPAM status IS RED.
Its not normal. It should not take more than 5-15 min to update SPAM.
Did you run update statistics before applying SPAM update & also plz check if missing statistics available in you system .Please check with these two points & rectify if any missing statistics are present in DB02old Tcode.
After this your SPAM update will work fine.
Thanks..
Mohit -
ERROR: Update mode C is not supported by the extraction API - R3 11
Hi gurus,
I just tryed to implement the solution I found at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
The data source is based on an Infoset on the KONV R/3 Table.
I setted the AIM delta process and I did all the activities as written in the document.
The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
The "initialize delta process" (with data) doesen't work and returns the following error:
Update mode C is not supported by the extraction API
the error code is R3 11.
have you any idea about it???
Thanks!!!
Regards!
MatteoHi,
for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
regards
Siggi -
Error publishing from Muse - "error updating device redirect setting"
After recent upgrade of Muse I am getting an error message when publishing. The pages are published correctly but there is an error which prevents the final completion of the process. message = "Error updating device redirect settings click resume to try again." it never works. What is up? is this a Business Catalyst error or a a Muse error?
I turned off the firewall, logged out from Creative Cloud and restarted my computer. After rebooting, I logged in to Creative Cloud, open Muse and connect to Business Catalyst without no problem,
-
When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!
Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena -
Error 'Update Was Terminated' - While clearing an open item
Hi,
We are facing a problem where we receive an error - "Update Was Terminated" when we try to clear some entries for 3-4 vendors (posted in period 12 of year 2006. it happens only for those 3-4 vendors). We have identified the problem as follows:
1) We ran program SAPF190 and found that there is a defference in the 'debit balance' and Total of line items' for these vendors. I ran program SAPF71 (in Quality server) which rectified some entries. However, some entries still remain incorrect and these entries that still remain incorrect are ones - "which have a posting date of 10 oct 2006, but the posting period picked up by the document header is period 12, instead of period 7". Now, some other documents posted for the same vendor on the same date have picked up the correct posting period i.e. 7. I am really baffled at how this actually happened and howcome the system allowed it??
2) After running program SAPF190, there were some entries that got corrected (these entries were just not captured by the system in the balance field, and did not have the same problem as the entries mentioned above where the wrong posting period was picked by the system). When i tried to clear the line items for the vendors whose entries had been rectified, it still gve the update error. When i checked the number range status, i noticed something very odd:
"The number range status shows a number much higher than what the system is automatically picking for the documents (e.g system picks 230 as the document number when posting, but the number range staus in FBN1 shows current number as 256). Also, once 256 is reached (i posted 26 documents for it) and we post the 257th document, the error remains and the status number now moves up 100 places to 356). At this time if i post another document it picks the number 258 instead of 356...and if i keep posting documents till 356 is reached, im sure when i post the 357th document, the status will jump to 456)
Can someone please help me here!! I dont understand how and why this is happening!!
Thanks!!
Regards,
Angad>
Ravi Sankar Venna wrote:
> Hello,
>
> Please let me know the ERROR name you are getting and what is the transaction code you are using to clear. (F.13 or F-44)
>
> Try to analyze the dump in ST22.
>
> Regards,
>
> Ravi
Hi,
The error is "Update was terminated" . It sends this message to my inbox!! After searching a bit i found about the two reports - SAPF190 and SAPF071. After running them i found some balance mis-match. I ran the two programs and it rectified those mis-matched entries!! However, even after that, it is giving me the same "update was terminated" error. We are using F-44 for clearing.
This error is coming only for those entries which we had posted using a user-exit. Basiaclly these are entries for late payment which were programmed to be posted directly at the time of invoicing. I just checked the code of the exit, and these entries were (astonishingly) made directly into the BKPF and BSEG tables (infact the posting period was hard-coded to '12', which is why even when my posting date for these documents is 10.10.2006, it still enters posting period '12' in the header instead of '7'.). Therefore, there were balance mis-match when we saw the monthly balance in FK10N and compared it with the line items total for that month. However, on running report SAPF071, it corrected those entries, but the update error problem still persists!!
The exact error:
Update was terminated
System ID.... QAS
Client....... 100
User..... MOHGYA323233
Transaction.. FB1K
Update key... 4A206A2D00E5001202000000C0A80A35
Generated.... 04.06.2009, 11:24:59
Completed.... 04.06.2009, 11:24:59
Error info... F1 805: Clearing: Line item 001 -
Error updating adobe download assistant from version 1.0.6 to 1.2.9
i am getting an error updated adobe download assistant from version 1.0.6 to 1.2.9. "The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.
Sammybobammy89 what Adobe software title are you trying to install? To resolve your current error remove version 1.0.6 prior to installing version 1.2.9.
-
Error Updating table condition table 372 in J1IIN
Hello all,
I am facing the problem while working in ECC 6.0 environment in the transaction code J1IIN.
I have maintained the condition type JEXP ( A/R BED %) as 14% with the Key combination Country/Plant/Control Code (Table 357). While iam saving the Excise invoice the system is throwing the error like error updating the table condition table 372
I have gone through the post given by Ms. Jyoti few days back and tried to do some changes in the customisation.
I tried to maintain a different access sequence for the condition type JEXP i.e a new Access sequence(ZJEX) and also a new condition tpe (ZJEP). We don't have other Excise condition type in our Pricing procedure.
In the access sequence except condition table 372, I have maintained all other condition tables.
Still the error is persisiting. Can anyone put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Also while debugging it gives a message "An exception (CX_BADI_INITIAL_REFERENCE) occured".
Does this help in anyways.
Gurus plz give u r suggestions.
Thanks in advance,
Regards,
Karthik.Hello Srinivas/Sandeep
Please ensure that access sequence in the condition type JEXC has got the table 372. If it is not there please maintain it.
The standard access sequence used in all duty condition type
is JEXC which has got the table 372 this will get updated once
you save your excise invoice.
If the issue is resolved, kinldy close the message.
Regards
MBS
Maybe you are looking for
-
Hi, Can we use the Apache's mod_jk to forward the requests and headers to Weblogic? or is that only for Tomcat! WLS version : 9.2 Apache: 2.0.X When I tried, I could not connect to the Weblogic server from Apache and Getting '502 Bad gateway' error P
-
Displaying Summary Column Values
I have just learned about summary columns in Developer 2000...But I can't complete the task... I'd like to display the # of records for each value in the status column of my report. I have created the break group with Status column. Then I added a su
-
There is no access to the photos to iCloud account...
Hi After the last OSX update i get this messege constandly. - There is no access to the photos to iCloud account "My@Email". Review your account information in System Preferences. But I havn't got a clue whats wrong. I have checked that I use the cor
-
WDABAP: making the right side of message area invisible
Hi all, I have a message area on my screen to display error messages. I do not want the right hand side of the message area to appear on the screen (1 message and 'Show List' button). And in the LHS, the message needs to have a hyperlink and must n
-
Hi CAN ANYONE TELL ME FOR UNICODE EACH CHARATER CAN OCCUPY 2 BYTES OR 4 BYTES WHAT IS THE DIFFERENCE ,I MEAN WHY DO WE HAVE SO WE HAVE DECIDE BETWEEN ONE OF THIS . wHAT ARE THE ADV OF ONE OVER THE OTHER THANKS SUCHITRA