Error Updating the Repository (MDM7.1)

Hi,
We have migrated repository from 5.5 (SP06) to MDM 7.1 SP5. Post migration, when 'Update repository' option is executed, we are getting the error message 'Error updating the repository - The Table could not be modified'.
Update repository is failing and we are not able to move ahead.
Please advise steps that need to be followed to resolve this error.
Regards,
Vinay

Hi ,
Below points have been taken care of. But, we are still facing the same error. Any other suggestions please.
First of all you should be sure that your old repository haven't errors or warning(run repair).
(Vinay : Done. No errors or warnings)
After that you should save all information about your validations, assignments, opened workflows, records under workflows.
(Vinay: Taken care of)
And delete all of them(i mean validations, assignments, opened workflows and workflows history).
(Vinay: No validations/Assignments or open workflows)
If you are change database(for example Oracle to DB2) you should check all permissions for your database user and database codepage setup(its should be the same as in your old database).
(Vinay: Database is same as before (Oracle))
Regards,
VInay

Similar Messages

Error updating the table condition table 372 in J1IIN

Hello all,
I am facing the problem in the transaction code J1IIN (In CIN).
I have maintained the condition type JEXP ( A/R BED %) as 16% with the Key combination Country/Plant/Control Code (Table 357). While iam saving the Excise invoice the system is throwing the error like Error updating the table condition table 372
I have gone through the post given by Ms. Jyoti few days back and tried to do some changes in the customisation.
I tried to maintain a different access sequence for the condition type JEXP i.e In the access sequence except condition table 372, I have maintained all other condition tables.
Still the error is persisiting. Can anyone put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Gurus plz give ur suggestions.
Thanks
Srinivas

Hello Srinivas/Sandeep
Please ensure that access sequence in the condition type JEXC has got the table 372. If it is not there please maintain it.
The standard access sequence used in all duty condition type
is JEXC which has got the table 372 this will get updated once
you save your excise invoice.
If the issue is resolved, kinldy close the message.
Regards
MBS

Error updating the table 372

Hi Gurus,
I maintained the JCEP ( A/R Cess %) as 3%. While iam saving the Excise invoice the system is throwing the error like error updating the table condition table 372
Gurus plz give u r suggestions.
regards,
jyothi.
Edited by: jyothi. on Feb 25, 2008 7:26 AM

Hi Murali!
Even I am facing the same problem while working in ECC 6.0 environment. I am continuing in the same post as I feel it is most relevant post to continue the issue instead of opening a new issue.
I tried to maintain a different access sequence for the condition type JEXP i.e a new Access sequence(ZJEX) and also a new condition tpe (ZJEP). We don't have other Excise condition type in our Pricing procedure.
In the access sequence except condition table 372, I have maintained all other condition tables.
We have maintained the values against table 357- Country/Plant/Control Code.
Still the error is persisiting. Can you put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Thanks in advance,
Regards,
Karthik.

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

Error updating the process object in MSS workflow...

Hi All,
I copied the standard workflow 'WS18900010' and triggered the same in backend. In this the first step is to approve the form. I set the agent as WF Initiator for this step. Now I approved the form. But the workitem went into error giving the error message 'ERROR UPDATING THE PROCESS OBJECT'.
What could be the reason for this?
If the originator of request and approver of request is same(just for testing purpose), then may dis also result into above error?
Please suggest.
Guddan

Hello,
Please maintain this 'CL_HRASR00_POBJ_WF_EXIT' in the workflow exit for the specific task and also at the workflow header level.
Execute the process and if still error occurs, check for HCM P&F authorization and if it is fine, then check if the case settings are maintained correctly.
you can find the case configuration in HCM P&F help docu.
hope this helps.
Best Regards
Saujanya

Error updating the dataset!!

Hi,
Currently our endusers are working with SAP Lumira, automatic
update to 1.15.1, Build 879 was made; but what we can
see is that the
stories that were already generated with a version 1.14 and they try to
refresh this stories, SAP Lumira send a error message:
Error updating the dataset!!
No more details..
Steps to Reproduce
1. Open SAP Lumira
2. Open Story
3. Refresh Story with the same excel dataset.
4. Error
SAP Lumira 1.15.1 Build 879
Windows 7 Home Basic
Microsof Excel 2010

Hi Tammy
The SAP nota doesn't apply..
Cause
The cause seemed to be something to do with a set of about 20,000 cells in a single column of the Excel sheet. --> We use just about 150 cells
The exact item that is causing the issue in the Excel file file is not found. --> The file is in the same route.
Resolution
Two solutions were found for this issue:
The column that was causing issues was a date column and the # symbol was used for null values. Replacing the # symbol with a blank in the data got this to work. --> Not symbol # on the file
2. Opening the Excel file up with another office tool like Libre Office and exporting it as a new Excel file fixes what ever is in the file causing the error. --> Still the same error

Error configuring the repository using Repository Assistant.

Hi,
I have a SYSDBA access to a oracle 9i instance and i tried to configure the OWB Repository through Repository Assistant. I am getting the following error.
How can i rectify this error.
INS0037 - The initialization parameter job_queue_processes of the Database <instance_Name> cannot be set to zero. the recommended value for OWB is 10 or larger. Please change the parameter settings in the database, then coontinue the repository installation.
Thanks and Regards,
Soma

Hi Soma,
you have to set the parameter job_queue_processes for your db to 10 or larger.
In advance verify with your dba that the parameter is not set to zero on purpose to prevent other jobs from running!
Regards,
Carsten.

Update distribution point errors updating the boot image....SCCM 2012 r2

Fairly new to SCCM (started on it about a month and a half ago and only been troubleshooting different things). As of this moment I'm attempting to get imaging back up, which it looks as if the drivers did not get injected into the boot image properly
before. This seems to be resolved but when I attempt to update the distro point i end up with this error below. Any help is appreciated.
Error: The wizard detected the following problems when updating the boot image.
• Failed to inject a ConfigMgr driver into the mounted WIM file
The SMS Provider reported an error.: ConfigMgr Error Object:
instance of SMS_ExtendedStatus
• Description = "Failed to insert OSD binaries into the WIM file";
• ErrorCode = 2152205056;
• File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspbootimagepackage.cpp";
• Line = 4716;
• ObjectInfo = "CSspBootImagePackage::PreRefreshPkgSrcHook";
• Operation = "ExecMethod";
• ParameterInfo = "SMS_BootImagePackage.PackageID=\"SMS00005\"";
• ProviderName = "WinMgmt";
• StatusCode = 2147749889;

What version of Configuration Manager are you running, and are you using MDT?
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

OIM - Error updating the Teminal Services Attributes for a Users AD account

Hi,
I am trying to populate 'Terminal Profile Path', 'Terminal Home Directory' and 'Terminal Allow Login' attributes for a users Active DIrectory account from the OIM admin interface. and the request keeps getting rejected in OIM.
*1) I get the below message in OIM -*
Response: non-JRMP server at remote endpoint
Response Description: Unknown response received
Error Details
Setting task status... "non-JRMP server at remote endpoint" does not correspond to a known Response Code. Using "UNKNOWN".
*2) Below are the error messages from the logs:*
2010-04-13 13:42:15,843 ERROR [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/getRemoteManagerInfo encounter some problems: No Remote Manager associated with current IT Resource.
2010-04-13 13:42:15,843 ERROR [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/getRemoteManagerInfo encounter some problems: INTERNAL_ERROR
com.thortech.xl.dataobj.util.tcAdapterTaskException: INTERNAL_ERROR
     at com.thortech.xl.adapterfactory.events.tcAdpEvent.getRemoteManagerInfo(Unknown Source)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSEXECUTEREMOTESCRIPT.EXECUTEREMOTESCRIPT(adpADCSEXECUTEREMOTESCRIPT.java:646)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSEXECUTEREMOTESCRIPT.implementation(adpADCSEXECUTEREMOTESCRIPT.java:148)
     at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
     at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.setProcessFormData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
     at org.jboss.ejb.Container.invoke(Container.java:960)
     at sun.reflect.GeneratedMethodAccessor133.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
     at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
     at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
     at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
     at $Proxy758.setProcessFormData(Unknown Source)
     at Thor.API.Operations.tcFormInstanceOperationsClient.setProcessFormData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy801.setProcessFormData(Unknown Source)
     at com.thortech.xl.webclient.actions.UserDefinedFormAction.editForm(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
     at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
     at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
     at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
     at java.lang.Thread.run(Thread.java:619)
2010-04-13 13:42:15,843 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcAdpEvent/getRemoteManagerInfo left.
2010-04-13 13:42:15,843 DEBUG [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager entered.
2010-04-13 13:42:15,843 DEBUG [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager Remote Manager Host Lookup URL is null
2010-04-13 13:42:15,843 DEBUG [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager Remote Manager service name is null
2010-04-13 13:42:15,843 INFO [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager Remote Manager full URL is null/null
2010-04-13 13:42:15,843 ERROR [XELLERATE.REMOTEMANAGER] Class/Method: RemoteManagerSupport/getRemoteManager encounter some problems: non-JRMP server at remote endpoint
java.rmi.ConnectIOException: non-JRMP server at remote endpoint
     at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:230)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
     at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at java.rmi.Naming.lookup(Naming.java:84)
     at com.thortech.xl.remotemanager.RemoteManagerSupport.getRemoteManager(Unknown Source)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSEXECUTEREMOTESCRIPT.EXECUTEREMOTESCRIPT(adpADCSEXECUTEREMOTESCRIPT.java:649)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSEXECUTEREMOTESCRIPT.implementation(adpADCSEXECUTEREMOTESCRIPT.java:148)
     at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
     at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.setProcessFormData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
     at org.jboss.ejb.Container.invoke(Container.java:960)
     at sun.reflect.GeneratedMethodAccessor133.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
     at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
     at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
     at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
     at $Proxy758.setProcessFormData(Unknown Source)
     at Thor.API.Operations.tcFormInstanceOperationsClient.setProcessFormData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy801.setProcessFormData(Unknown Source)
     at com.thortech.xl.webclient.actions.UserDefinedFormAction.editForm(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
     at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
     at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
     at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
     at java.lang.Thread.run(Thread.java:619)
*3)* I confirmed that RemoteManager is running by going to the design console. Administration -> Remote Manager. And I see that RManager service has both Running and IT Resource to be selected.
But, when I shutdown remote manager and look at the Remote Manager from design console it only has the IT Resource to be selected.
So, I am assuming the OIM is seeing the RManager service to be active when it is running,
Please let me know if you have any ideas of how I should go about resolving this issue.
Thanks,
Rohit P

that�??s the output of the FIMADMIN. Can you exec that script for the user account you are having problems with?
Cheers,
(HOPEFULLY THIS INFORMATION HELPS YOU!)
Jorge de Almeida Pinto | MVP Identity & Access - Directory Services
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always evaluate/test yourself before using/implementing this!
* DISCLAIMER: http://jorgequestforknowledge.wordpress.com/disclaimer/
################# Jorge's Quest For Knowledge ###############
###### BLOG URL: http://JorgeQuestForKnowledge.wordpress.com/ #####
#### RSS Feed URL: http://jorgequestforknowledge.wordpress.com/feed/ ####
-------------------------------------------------------------------------------------------------------<>
"Raveendra Raju" wrote in message news:[email protected]...
Hi,
I have enable the
attributes �??Domain�?�, �??AccountName�?� and �??ObjectSID�?� and values are populated about that AD user account synched by the FIM Sync Engine".
Please find the below attributes values
Account Name: fimadmin
Domain Name : TESTNET
Object SID : AQUAAAAAAAUVAAAAeZI7Xt/AsWwbRQVrlAQAAA==
I have already validated the following:
·Grant Authenticated Users access to the FIM Portal
Site (must be checked if you want to allow access to the FIM Portal)
·Grant Authenticated Users access to the FIM Password
Reset Site (must be checked if you want to allow access to the FIM Password Portal)
I have also run the PowerShell script to validate these settings:
·�?�General: Users can read non-administrative configuration
resources�?�
·�??User management: Users can read attributes of
their own�?�
BUT STILL NOT ABLE TO LOGIN AS A REGULAR USER ... PLEASE HELP ME OR SUGGEST ME HOW TO DEBUG TO IDENTIFY THE ISSUE. IF SOME ONE GIVE
ME THE STEPS THAT WOULD BE GREAT HELP.
Jorge de Almeida Pinto [MVP-DS] | Principal Consultant | BLOG: http://jorgequestforknowledge.wordpress.com/

Error updating the RSS feed "Sent Messages"

I'm getting the following alert message in mail RSS after Upgrade to Lion..
"The RSS feed could not be updated because no associated URL was found. This feed will no longer receive new articles"
Anyone any ideas what this means?

With the change to Apple Support Communities, all the subscriptions were reset. You'll need to start the RSS feed again. It can be found on the right side of the page under notifications > View feeds.
Regards,
Captfred

CS5 Error: Updating the cache for items within the folder recursively

I have another odd issue and have no clue to what would resolve this.
I'm on Mac OS X 10.6.8. Bridge CS5
I've been getting the same message when creating a new folder. However when I create a new folder in my Finder window, it creates the folder immediately and reflects as such in bridge.
I can cope with creating folders this way. But it becomes a pest when I forget to do it.
One thing is, the only time this happens is when using our server. But this has not always been the case.
This thread below also has the same issue and wasn't resolved:
http://forums.adobe.com/thread/994281?start=0&tstart=0

BEA Marcom wrote:
One thing is, the only time this happens is when using our server. But this has not always been the case.
I suspect it has to do with server issue. Some have found they had a 10 sec or more delay and that if the server is pointed to Favorites Bridge wants to cache all the files on the server. May be something like that.

Error "Updating Respository" from MDM 5.5 to MDM 7.1

Hi all,
We have been using MDM 5.5 SP 6 for the last 2 years; right now we have a Sandbox environment (MDM 7.1 - 7.1.02.59) to check compatibility with our developments.
We unarchive the repositories in Sandbox and "Update Repository" for each one, 4 of our 7 repositories works without problem in this option, but 3 of them display the message "Error Updating Database Schema", we cant find any logs where describes the step that is trying to do.
Does anybody know which can be the problem?
To explain more of the background installations:
- MDM 5.5 is working with SQL 2005
- MDM 7.1 is working with SQL 2005
- The username that we use to Update all repositories is the same, so it's not a problem of authorization
Thanks for your help.

Hello,
The log you have mentioned is the complete log or only a part of it.
This seems to be problem from MDM side.
I'm sure you have followed all the steps, still for my reference would appreciate if you could verify them
take a fresh archive of the repository from 5.5,
transfer it in the Archive folder in the MDM Distribution folder
un-archive in the Console.
Update the repository (This where the error is ??)
Load the repository using updated indices
It will be helpful if you raise it with SAP an OSS message.
Regards,
Abhishek

Error Updating table condition table 372 in J1IIN

Hello all,
I am facing the problem while working in ECC 6.0 environment in the transaction code J1IIN.
I have maintained the condition type JEXP ( A/R BED %) as 14% with the Key combination Country/Plant/Control Code (Table 357). While iam saving the Excise invoice the system is throwing the error like error updating the table condition table 372
I have gone through the post given by Ms. Jyoti few days back and tried to do some changes in the customisation.
I tried to maintain a different access sequence for the condition type JEXP i.e a new Access sequence(ZJEX) and also a new condition tpe (ZJEP). We don't have other Excise condition type in our Pricing procedure.
In the access sequence except condition table 372, I have maintained all other condition tables.
Still the error is persisiting. Can anyone put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Also while debugging it gives a message "An exception (CX_BADI_INITIAL_REFERENCE) occured".
Does this help in anyways.
Gurus plz give u r suggestions.
Thanks in advance,
Regards,
Karthik.

Hello Srinivas/Sandeep
Please ensure that access sequence in the condition type JEXC has got the table 372. If it is not there please maintain it.
The standard access sequence used in all duty condition type
is JEXC which has got the table 372 this will get updated once
you save your excise invoice.
If the issue is resolved, kinldy close the message.
Regards
MBS

Csi_item_instance_pub.update_item_instance not updating the serial no

HI all,
csi_item_instance_pub.update_item_instance not updating the serial no. for Sales order transaction.
Actyally we have multiple error transaction for hte same serial no. for that i am planning to process the last transaction i.e. Sales order issue transaction.
While updating the serial no. with latest transaction i am getting "Msg1: Invalid Party location provided. The Location (38916) passed for the Instance Location Type "HZ_PARTY_SITES" is invalid or does not exists in TCA tables."
Even i had check for a customer this is the correct locaiton_id.
Below is my code:
which i took from one of the thread and pass my instance value.
=================
DECLARE
ln_order_num NUMBER;
lc_p_sno VARCHAR2(30); -- Variable for printer serial no.
LC_COMMIT VARCHAR2(5) := 'T';
l_msg_count NUMBER;
l_msg_data VARCHAR2(2000);
t_output varchar2(2000);
t_msg_dummy number;
l_loc_id number :=38916;
--x_msg_count NUMBER;
CURSOR ib_cur IS
SELECT cii.instance_id
,cii.serial_number
,cii.inventory_item_id
,cii.object_version_number
FROM csi_item_instances cii
WHERE cii.instance_id = 734113452;--instance_id
--ORDER BY 1;
TYPE ib_rec_tbl_type IS TABLE OF ib_cur%ROWTYPE;
ib_rec_tbl ib_rec_tbl_type;
-- Variables needed to call the Item Instance update API
l_api_version CONSTANT NUMBER := 1.0;
--l_msg_count NUMBER;
--l_msg_data VARCHAR2(2000);
l_msg_index NUMBER;
l_instance_id_lst csi_datastructures_pub.id_tbl;
l_instance_header_rec csi_datastructures_pub.instance_header_rec;
l_party_header_tbl csi_datastructures_pub.party_header_tbl;
l_party_acct_header_tbl csi_datastructures_pub.party_account_header_tbl;
l_org_unit_header_tbl csi_datastructures_pub.org_units_header_tbl;
l_instance_rec csi_datastructures_pub.instance_rec;
l_party_tbl csi_datastructures_pub.party_tbl;
l_account_tbl csi_datastructures_pub.party_account_tbl;
l_pricing_attrib_tbl csi_datastructures_pub.pricing_attribs_tbl;
l_org_assignments_tbl csi_datastructures_pub.organization_units_tbl;
l_asset_assignment_tbl csi_datastructures_pub.instance_asset_tbl;
l_ext_attrib_values_tbl csi_datastructures_pub.extend_attrib_values_tbl;
l_pricing_attribs_tbl csi_datastructures_pub.pricing_attribs_tbl;
l_ext_attrib_tbl csi_datastructures_pub.extend_attrib_values_tbl;
l_ext_attrib_def_tbl csi_datastructures_pub.extend_attrib_tbl;
l_asset_header_tbl csi_datastructures_pub.instance_asset_header_tbl;
l_txn_rec csi_datastructures_pub.transaction_rec;
l_install_location_id NUMBER;
l_return_status VARCHAR2(5);
lc_init_msg_lst VARCHAR2(1) := 'T';
ln_validation_level NUMBER;
lc_error_text VARCHAR2(4000);
l_install_location_type_code csi_item_instances.install_location_type_code%TYPE;
j BINARY_INTEGER := 0;
l_party_tbl_idx BINARY_INTEGER;
BEGIN
--Create a savepoint
-- SAVEPOINT dcrd_csi_upd_ib_snm;
OPEN ib_cur;
FETCH ib_cur BULK COLLECT
INTO ib_rec_tbl;
CLOSE ib_cur;
IF ib_rec_tbl.COUNT > 0
THEN
--fnd_file.put_line(fnd_file.log, 'Begin loop');
dbms_output.put_line('Begin loop');
FOR i IN ib_rec_tbl.FIRST .. ib_rec_tbl.LAST
LOOP
--Set savepoint before processing record.
--SAVEPOINT dcrd_csi_upd_ib_snm;
l_instance_header_rec.instance_id := ib_rec_tbl(i).instance_id;
csi_item_instance_pub.get_item_instance_details(p_api_version => l_api_version
,p_commit => fnd_api.g_false
,p_init_msg_list => fnd_api.g_false
,p_validation_level => fnd_api.g_valid_level_full
,p_instance_rec => l_instance_header_rec
,p_get_parties => fnd_api.g_true
,p_party_header_tbl => l_party_header_tbl
,p_get_accounts => fnd_api.g_true
,p_account_header_tbl => l_party_acct_header_tbl
,p_get_org_assignments => fnd_api.g_true
,p_org_header_tbl => l_org_unit_header_tbl
,p_get_pricing_attribs => fnd_api.g_false
,p_pricing_attrib_tbl =>l_pricing_attribs_tbl
,p_get_ext_attribs => fnd_api.g_false
,p_ext_attrib_tbl => l_ext_attrib_tbl
,p_ext_attrib_def_tbl => l_ext_attrib_def_tbl
,p_get_asset_assignments => fnd_api.g_false
,p_asset_header_tbl => l_asset_header_tbl
,p_resolve_id_columns => fnd_api.g_false
,p_time_stamp => SYSDATE
,x_return_status => l_return_status
,x_msg_count => l_msg_count
,x_msg_data => l_msg_data
lc_error_text := NULL;
l_instance_rec.instance_status_id :=510;
l_instance_rec.instance_id := l_instance_header_rec.instance_id;
l_instance_rec.install_date := sysdate;--'13-APR-2011';--sysdate;--'12-MAR-2008';
l_txn_rec.transaction_type_id := 33;
l_instance_rec.instance_usage_code :='OUT_OF_ENTERPRISE';
-- l_instance_rec.INV_SUBINVENTORY_NAME :='STAGE';
l_instance_rec.install_location_type_code := 'HZ_PARTY_SITES';
--l_instance_rec.install_location_id := 38916;
l_instance_rec.location_id := l_loc_id;--38916;
l_instance_rec.location_type_code := 'HZ_PARTY_SITES';
l_instance_rec.object_version_number := l_instance_header_rec.object_version_number;
l_txn_rec.transaction_id := fnd_api.g_miss_num;
l_txn_rec.transaction_date := SYSDATE;
l_txn_rec.source_transaction_date := SYSDATE;
l_txn_rec.transaction_type_id := 8; --Id for DATA_CORRECTION transaction type
--Change Owner party details
--FOR i IN l_party_header_tbl.FIRST..l_party_header_tbl.LAST
-- LOOP
-- IF l_party_header_tbl(i).relationship_type_code = 'OWNER'
--THEN
l_party_tbl(j).instance_party_id := l_party_header_tbl(i).instance_party_id;
l_party_tbl(j).relationship_type_code := l_party_header_tbl(i).relationship_type_code;
l_party_tbl(j).party_id := 167048;
l_party_tbl(j).contact_flag := 'N';
l_party_tbl(j).object_version_number := l_party_header_tbl(i).object_version_number;
l_party_tbl_idx := j;
j := j + 1;
--END IF;
--END LOOP;
dbms_output.put_line('l_party_tbl count is '||l_party_tbl.COUNT);
j := 0;
dbms_output.put_line('l_party_acct_header_tbl count is '||l_party_acct_header_tbl.COUNT);
--Change Owner party account details
--FOR i IN l_party_acct_header_tbl.FIRST..l_party_acct_header_tbl.LAST
-- LOOP
-- IF l_party_acct_header_tbl(i).relationship_type_code = 'OWNER'
-- THEN
l_account_tbl(j).ip_account_id := l_party_acct_header_tbl(i).ip_account_id;
l_account_tbl(j).instance_party_id := l_party_acct_header_tbl(i).instance_party_id;
l_account_tbl(j).party_account_id := 133045;--61217;
l_account_tbl(j).object_version_number := l_party_acct_header_tbl(i).object_version_number;
l_account_tbl(j).bill_to_address := 37729;--77370;
l_account_tbl(j).ship_to_address := 37730;--77648;
l_account_tbl(j).parent_tbl_index := l_party_tbl_idx;
j := j + 1;
-- END IF;
-- END LOOP;
dbms_output.put_line('l_account_tbl count is '||l_account_tbl.COUNT);
--j := 0;
--Change Operating Unit details
FOR i IN l_org_unit_header_tbl.FIRST..l_org_unit_header_tbl.LAST
LOOP
IF l_org_unit_header_tbl(i).relationship_type_code = 'SOLD_FROM'
THEN
l_org_assignments_tbl(j).instance_ou_id := l_org_unit_header_tbl(i).instance_ou_id;
l_org_assignments_tbl(j).instance_id := l_org_unit_header_tbl(i).instance_id;
l_org_assignments_tbl(j).relationship_type_code := l_org_unit_header_tbl(i).relationship_type_code;
l_org_assignments_tbl(j).active_start_date := sysdate;--'13-APR-2011';--sysdate;
--l_org_assignments_tbl(j).operating_unit_id := 86;
l_org_assignments_tbl(j).object_version_number := l_org_unit_header_tbl(i).object_version_number;
END IF;
END LOOP;*/
-- Call instance update API if a serial no. is to be updated
/*fnd_file.put_line(fnd_file.log
,'Updating IB record for IB# ' || ib_rec_tbl(i).instance_id);*/
dbms_output.put_line('Updating IB record for IB# ' || ib_rec_tbl(i).instance_id);
csi_item_instance_pub.update_item_instance(p_api_version => l_api_version
,p_commit => LC_COMMIT --Handled outside API
,p_init_msg_list => lc_init_msg_lst
,p_validation_level => ln_validation_level
,p_instance_rec => l_instance_rec
,p_ext_attrib_values_tbl => l_ext_attrib_values_tbl --Null
,p_party_tbl => l_party_tbl --Null
,p_account_tbl => l_account_tbl --Null
,p_pricing_attrib_tbl => l_pricing_attrib_tbl --Null
,p_org_assignments_tbl => l_org_assignments_tbl --Null
,p_asset_assignment_tbl => l_asset_assignment_tbl --Null
,p_txn_rec => l_txn_rec
,x_instance_id_lst => l_instance_id_lst
,x_return_status => l_return_status
,x_msg_count => l_msg_count
,x_msg_data => l_msg_data);
dbms_output.put_line('API STATUS# ' || l_return_status);
if l_msg_count > 0
then
for j in 1 .. l_msg_count loop
fnd_msg_pub.get
( j
, FND_API.G_FALSE
, l_msg_data
, t_msg_dummy
t_output := ( 'Msg'
|| To_Char
( j
|| ': '
|| l_msg_data
dbms_output.put_line
( SubStr
( t_output
, 1
, 255
end loop;
end if;
IF l_return_status = 'S'
THEN
commit;
/*fnd_file.put_line(fnd_file.log
, 'Error updating the install base for IB# ' || ib_rec_tbl(i)
.instance_id);*/
dbms_output.put_line('Error updating the install base for IB# ' || ib_rec_tbl(i)
.instance_id);
FOR i IN 1 .. l_msg_count
LOOP
fnd_msg_pub.get(p_msg_index => -1
,p_encoded => 'F'
,p_data => l_msg_data
,p_msg_index_out => l_msg_index);
lc_error_text := lc_error_text || (substr(l_msg_data, 1, 255));
END LOOP;
dbms_output.put_line(lc_error_text);
--Rollback the transaction if error occured.
--ROLLBACK TO dcrd_csi_upd_ib_snm;
ELSE
/*fnd_file.put_line(fnd_file.log
, 'Install base update successful for IB# ' || ib_rec_tbl(i)
.instance_id);*/
dbms_output.put_line('Install base update successful for IB# ' || ib_rec_tbl(i)
.instance_id);
lc_error_text := 'SUCCESS!';
END IF;
--Update the temporary table record status
--update_status(ib_rec_tbl(i).snm_id, l_return_status, lc_error_text);
END LOOP;
--Commit transactions.
COMMIT;
END IF;
commit;
EXCEPTION
WHEN no_data_found THEN
--fnd_file.put_line(fnd_file.log, 'No records to process');
dbms_output.put_line('No records to process');
WHEN OTHERS THEN
/* fnd_file.put_line(fnd_file.log, 'Error in update_ib procedure');
fnd_file.put_line(fnd_file.log, to_char(SQLCODE) || ' - ' || SQLERRM);
dbms_output.put_line('Error in update_ib procedure');
dbms_output.put_line(to_char(SQLCODE) || ' - ' || SQLERRM);
END;
================================================
Thanks,
Raj
Edited by: user13275176 on Apr 14, 2011 7:07 AM

That is a wrong way to do that (I am not sure of the business needs and the situation in you are in that is forcing you to do that).
If you want the instance as if it is in Inventory, perform inventory receipt transaction. You should not just change the ownership (rather I should say you 'cannot' since the API should not allow you change the instance usage code to INVENTORY and location to Inventory just like that) and location details as inventory without performing the transaction in inventory.
What about your inventory, you do not want quantity back in inventory?
Thanks
Nagamohan

Error Installing OWB Repository

I exported a 9.2.0.1 Database and imported the user into a new Database Instance.
However, not all the runtime and repository components were reimported into the new schema.
I dropped and reinstalled the runtime successfully.
I also dropped the repository but have been unable to reinstall the repository.
OWB Client NT Client Version: 9.0.3.36.2
DB OS: Sun Solaris
DB Version 9.2.0.1.0
The following is the error in the repository error log:
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility: java.sql.SQLException: ORA-00904: "OWM_VIEW_UTILITIES"."CLASSIFIED_OBJ_TYPE": invalid identifier
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility: ORA-06512: at line 2
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility: [ at runSqlScript(RuntimeInstaller.java ) ].
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility: this is SQL error
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility: java.sql.SQLException: ORA-00904: "OWM_VIEW_UTILITIES"."CLASSIFIED_OBJ_TYPE": invalid identifier
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility: ORA-06512: at line 2
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility: java.sql.SQLException: ORA-00904: "OWM_VIEW_UTILITIES"."CLASSIFIED_OBJ_TYPE": invalid identifier
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility: ORA-06512: at line 2
Sat Jun 21 17:50:12 VET 2003
oracle.wh.util.DebugUtility:

Kirt,
Are you rerunning the repository assistant, or are you trying to restore from a dump? Officially we do not support restoring from a dump (not yet, at least) ... but there are some notes on metalink on how to do it anyway:
Repository, note 228918.1:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=228918.1
Runtime, note 235658.1:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=235658.1
Mark.

Error Updating the Repository (MDM7.1)

Similar Messages

Maybe you are looking for