Error updating to 6.1.3 on iPad 3. Won't update

Cannot update to 6.1.3 on iPad 3.  Getting message "update failed".
Any one with similar issue?

I would start with this. Reboot your iPad and power cycle your router.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Unplug your router for about 30 seconds, then plug it back in.
See if that helps. If it doesn't help, you can always use iTunes to update the iPad. When you update with iTunes, it takes a good while longer because you are downloading the entire iOS all over again. When you update OTA, you are only downloading the incremental update.
If you don't use iTunes or do not have a computer, you can also try using another WiFi network, a friends house, another family member, a public WiFi hotspot.
If you do use iTunes, disable your antivirus software and turn off your firewall while you are updating.

Similar Messages

  • My iPad 2 won't update apps or down load any suggestions

    My iPad 2 won't update apps or down load any suggestions

    Hi Geek5,
    If you are having issues connecting to the iTunes Store, you may find the troubleshooting in the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • My ipad 2 won't update apps. It shows that 2 apps need updating, but not which ones.

    My iPad 2 won't update apps. It shows that 2 apps need updating, but doesn't show which 2.

    Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
    According to Fly150 in another discussion, this is a workaround - for the time being.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store.

  • My iPad mini won't update my apps.  I have closed all open apps, done multiple resets but I show 24 updates and when I hit the update, the screen is blank.

    My iPad mini won't update my apps.  I have closed all open apps and done multiple resets.  I hit update and the screen is blank, even though the bubble shows 14 to update.

    If you are getting the blank app update screen, many people are having this problem over the last couple of days.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

  • HT6012 I had uninstalled iMovie 10 after it was updated and decided to reinstall it but it won't update, iMovie 10 update is stuck at installed in my App Store account.  How do I get it the update to revert to uninstalled so I can re-update iMovie 10 to 1

    I had uninstalled iMovie 10 after it was updated and decided to reinstall it but it won't update, iMovie 10 update is stuck at installed in my App Store account. How do I get it the update to revert to uninstalled so I can re-update iMovie 10 to 10.0.1? iMovie 9.0.9 (iLife 11) is still installed and working.

    What in particular didn't you like about Firefox 6?
    You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
    *https://support.mozilla.com/kb/common-questions-after-updating-firefox
    Do a clean reinstall of the version that you want to use.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • My ipad 3 won't update to iOS 6.2. I get error message saying I'm not connected to the Internet even though Internet is working for everything else.

    Does anyone know why this is happening or what I can do?

    If the update is not working from the iPad over wireless have you tried to update the ipad via iTunes. Here are the steps for both ways of updating your iPad http://support.apple.com/kb/HT4623

  • My wife's iPad 2 won't update to IOS 5 on her iMac, my iPad 2 updated fine on my Dell PC- what gives?

    My wife has a new (less than 6 months old) big beautiful iMac (of which I am extremely jealous-but that has no bearing on the conversation at hand) but every time she tries to update her iPad 2 to iOS 5 on iTunes she gets the error code 3259 at the very end of the 40+ minute download.  I own a Dell (over 1 1/2 years old) running windows 7 and I updated my iPad 2 to iOS 5 when it was first released with no problems.  I checked the message boards and they said that they were most likely experiencing an overload of people trying to download off the servers and that was causing the download issues.  So I waited and tried again....and again....and again....and, well you get the idea. 
    I can not fathom how my PC updated fine but my wife's iMac (running the latest update of Lion and yes she updated iTunes and did the firewall settings correctly) can't/won't update it to save her life.  Does anyone have any ideas????
    Thanks,
    Luke 42697

    Hello jaideniv,
    Thank you for using Apple Support Communities!
    First I would recommend this article named Can't connect to the iTunes Store found here http://support.apple.com/kb/TS1368. It will get you started with troubleshooting iTunes Store connection issues on the computer and the phone.
    If needed there is a more advanced article named iTunes: Advanced iTunes Store troubleshooting found here http://support.apple.com/kb/TS3297 that I would next recommend.
    Take care,
    Sterling

  • IPad 1 won't update to ios 5

    My Mum has been given an iPad 1 by a relative who has bought an iPad Mini as a replacement.
    She uses a PC so I have installed iTunes onto it and am trying to update the iPad to ios 5 (as a number of apps I'm trying to install for her just won't load without ios 5). However, every time I try to update it I get an error message saying "the disk is full. Removing files and emptying the Recycle Bin will free up additional space". I've emptied the recycle bin but it still won't work and I'm pretty sure the disk is not full as she doesn't use it for much other than surfing the net.
    Can anyone help?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom
    If you have not already done so, you need to reset the iPad to the factory settings. http://ipad.about.com/od/iPad_Guide/ss/How-To-Wipe-Your-iPad-And-Erase-Data.htm This will erase all apps and files. Any apps that were downloaded by the previous owner using their Apple ID can't be updated using your ID.
    Look at this link.
    Giving your former iPad to a spouse or family member: the quick guide
    http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
    Message was edited by: Texas Mac Man

  • Apps on iPad Air won't update - just open

    When I select UPDATE for an app in the App Store, the App opens instead of updating.   When I return to the App Store, the update remains.
    This started after updating to iOS 8.
    Does anyone have any suggestions on how to fix?

    I'm still on an older version of 7, but it started immediately after Apple release 8.  It's a problem with their store. 
    As resetting is not an option for rme, i found one thing that sorta helps...  I make sure the store isn't running, then I launch it, then tap Updates, and then frantically tap where Update All will be.  It works maybe one out of 5 times I try, and then that works until the iPad thinks it is running out of storage space and the cycle begins again...

  • TS3274 iPad mini won't update to iOS 7.0.4

    I just bought an iPad Mini today and every time I try to update the OS to 7.0.4, it gives me an error message about halfway through that says "An error occured downloading iOS 7.0.4"
    How do I fix this?

    Try connecting to iTune and Check for Updates (tap to enlarge image)

  • Ipad software won't update

    I have just tried to update my ipad software from version 4.3.3 (very old & not been updated in yonks!) to the latest version but after 2 hours spent waiting whilst it downloaded the latest software it failed to update my ipad. There was no error message to say why it hadn't updated.

    Try connecting your iPad to iTunes and Check for Updates (tap to enlarge image)

  • IPad 2 won't update to iOS 5.0.1

    Today I got a WiFi 3G 64GB white iPad 2 running on AT&T. When I got it it was running iOS 4.3.5. When I plugged it into my MacBook Pro, It gave me an error message saying that "The iPad "Alex's iPad 2" is not eligble for the requested build". I've tried rebooting, DFU, re install ing iTunes. I tried mostly anything and can't get it to work. Could it be that because its Christmas time people are tryiing to all update to iOS 5 at once?

    Had the same issue myself. Look at the following link. Just done it myself and it works a treat. Be prepared to wait about 30 mins for the full update to take effect.
    http://www.cellbull.com/how-to-resolve-“this-device-isn’t-eligible-for-the-reque sted-build”-error-while-updating-to-ios-5-0-1/
    Good Luck and have a happy NewYear!

  • Ipad 2 won't update to ios 5 no matter what I try

    I've literally tried everything, I've deleted my itunes twice to make sure I had itunes 10.5. Then everytime I go a try and updat it will take almost 4 hrs and once at 3/4 of the download it will say I have a network issue and go back to zero. I just bought this Ipad in august and I have no clue what to do please help!

    If you are getting a network timeout error then try temporarily turning off your firewall and antivirus software until the download has completed. If that doesn't work then you could try downloading it via a browser : https://discussions.apple.com/message/16436025#16436025

  • My iPad 2 won't update

    Hi, I have this error of not being able to update my iPad 2 4.3.1 to iOS 5.1.1
    After pressing the update button and waiting for it to extract the updated software, a window pops up. It says: "The iPad could not be restored. This device isn't eligible for the requested build." It doesn't have a specific error code number.
    http://support.apple.com/kb/TS1275
    I used this website and did everything it told me to, but I still couldn't update my iPad.
    Please help!
    Thanks

    Have you got the latest version of iTunes on your computer ? There is also some troubleshooting for that error message towards the top of this page which you could try.

  • IPad Air won't update to OSX 8.0.2

    I have a 16GB iPad Air.
    There is not enough room left to update wirelessly to OSX 8.0.2. so I've been trying to do it via iTunes on my MBP.  All seems to go OK for first 10 minutes or so of download, but then I keep getting a message saying that there is an 'error' (unspecified) and that I should try again.  I've tried 4 times now, but nothing seems to work.
    Any thoughts/suggestion please?  Thanks.

    Hey Rachacha,
    Thanks for the question. I understand that you are experiencing issues updating applications on your device. Let’s see if we can isolate this issue further. First, try closing the App Store application:
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    Next, go ahead and restart your device and test once more:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/HT1430
    Thanks,
    Matt M.

  • IPad 1 won't Update to 5.1--3194

    I am trying to convince my neighbor of just how special the iPad is. He is not exactly a techie (-:  He couldn't send outgoing e-mail, but that was a simple problem of lack of outgoing mail server password. As I tried to update his 18 apps needing update, I discovered he was still running OS 4.4.3. When I tried to download the update, I got the following error message:  The iPad "Leslie Carter" could not be restored. An unknown error occurred. (3194). This happened right after it finished loading the "Extracting Software" screen. Ideas????

    3194 usually occurs as a result of restoring on a computer that had modified host files.
    To check windows host files, you may want to view my link:
    http://www.errorchannel.net/itunes-error-3194.aspx
    Note:
    As per these forums terms and conditions section 2.6, while no advertising is currently present this may change in future, therefore:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Maybe you are looking for

  • Where do I look at UTLTZUV2.SQL output?

    Dear gurus, I'm in the process of applying Security Patch 16: 6637237(CPUJAN2008) on my Windows 32bit envs. In this process, I need to check the existing TSTZ data using this oracle provided script. I ran it and didn't see the result. Here in the inf

  • OamAuthenticator.jar and weblogic server 9.2.3

    Hi all, Can anyone please tell whether we can integrate OAM 10.1.4.03 with weblogic 9.2.3 using oamAuthenProvider.jar? If so,could anyone please provide any document which contains the steps to be followed for the integration process. Thanks & Regard

  • DB13 fails because of MEDIANAME does not match

    Hi SDN, while configure DB13, first job runs perfectly but when it runs a week later it fails because of an MEDIANAME does not match error Duration:  0 hours, 0 minutes, 0 seconds                        Last msg:  Executed as user: NT AUTHORITY\SYSTE

  • Claymation with still photos

    I am looking for help in importing digital still photos from iphoto to imovieHD 6.0.3. I am trying to set a very short play time so that when viewed as a whole the photos become an animation of three clay figures. I've seen it done w/ older versions

  • Cp6 - Bug (button graphics) - phantoms that cannot be removed?

    Hello all, I just added a dozen custom buttons for the buttons gallery (url: C:\Program Files\Adobe\Adobe Captivate 6 x64\Gallery\Buttons). Some of the new ones work, however, others when clicked, display an older replaced button. In Properties/Gener