Error Upgrade BW 7.01 to 7.3 in Phase DEPLOY_ONLINE_SHD_DM
Hello,
i have a problem by upgrading BW 7.01 to 7.3 in Phase DEPLOY_ONLINE_SHD_DM
An error has occurred during the execution of the DEPLOY_ONLINE_SHD_DM phase.
Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action. Deployment error. See log /usr/sap/TTW/upg/java/log/deploy_api.2.log for details. com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DeploymentException. Reason: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_xappsanalyticsdm_par] failed com.sap.engine.services.dc.cm.deploy.DeploymentException: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_xappsanalyticsdm_par] failed com.sap.engine.services.dc.gd.DeliveryException: [ERROR CODE DPL.DC.3298] Operation [deploy] of [sap.com_xappsanalyticsdm_par] failed com.sap.engine.services.deploy.server.utils.DSRemoteException: ASJ.dpl_ds.006193 Operation [deploy] of [/usr/sap/TTW/upg/java/TTW/JC05/j2ee/cluster/server0/./temp/tcbldeploy_controller/archives/38/OPMFNDUI10_0-20004035_SCA1317900827022/DEPLOYARCHIVES/xappsanalyticsdm_par.sda] failed com.sap.engine.services.deploy.container.DeploymentException: Exception during deploy: par files are no longer supported. Please use the migration tools for migrating your file. com.sap.portal.prt.sapj2ee.deployment.PortalDeploymentException: par files are no longer supported. Please use the migration tools for migrating your file. at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.deploy(PortalRuntimeContainer.java:244) at com.sap.engine.services.deploy.server.utils.container.ContainerWrapper.deploy(ContainerWrapper.java:309) at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:519) at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:182) at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:203) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:421) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:473) at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:1828) at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:358) at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:311) at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:139) at com.sap.engine.services.dc.gd.impl.InitialApplicationDeployer.performDeployment(InitialApplicationDeployer.java:138) at com.sap.engine.services.dc.gd.impl.InitialGenericDeliveryImpl.deploy(InitialGenericDeliveryImpl.java:57) at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:213) at com.sap.engine.services.dc.cm.deploy.impl.BulkOnlineDeployProcessor.deploy(BulkOnlineDeployProcessor.java:67) at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor$DeployProcessorHelper.visit(AbstractDeployProcessor.java:282) at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:84) at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor.deploy(AbstractDeployProcessor.java:100) at com.sap.engine.services.dc.cm.deploy.impl.DeployThread.run(DeployThread.java:39) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Thanks
Steven
Steven Bier wrote:>
>
>H/38/OPMFNDUI10_0-20004035_SCA1317900827022/DEPLOYARCHIVES/xappsanalyticsdm_par.sda] failed >com.sap.engine.services.deploy.container.DeploymentException: Exception during deploy: par files are no longer supported. >Please use the migration tools for migrating your file. com.sap.portal.prt.sapj2ee.deployment.PortalDeploymentException: par >files are no longer supported. Please use the migration tools for migrating your file. at
>
>
If you will check above logs then it is saying your parfile is not supported. Either you should migrate or un-deploy it and then upgrade.
Thanks
Sunny
Similar Messages
-
REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade.
Hi Experts,
I have done the recording for FK05 and created functionmodule for the same. But when I use that function module in my custom program or if I try directly execute the FM, I am getting dump like syntax error. So I did syntax check and tried to activate, I am getting "REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade" error.
Please help me soon to resolve this issue.
Thanks in advance.
ShreyanshHi
Goto main function group include name attributes tab and double click.
once the include is opened, try to activate it. if shows errors then fix.
regards
Shiva -
Trying to upgrade server 2012 with RDS role on it, to server 2012 R2.
It stays for a while on step "Collecting files, settings, and applications 0%"
and then returns the error:
Error upgrading: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest update
Installed all the latest updates, rebooted, also tried to to run setup with local admin, still the same.
Setup logs contain user profile related errors:
[0x08039d] MIG Cannot add mapping for user profile C:/Users/Administrator.001. Error: 32: Win32Exception: The process cannot access the file because it is being used by another process. [0x00000020] __cdecl Mig::CIndirectKeyMapper::CIndirectKeyMapper(class
UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,int,const Mig::HiveLoadRetryOptions *)[gle=0x000000cb]2014-08-17 03:30:13, Error [0x080801] MIG User profile loading error. Aborting
due to external request.[gle=0x000000cb]I was able to get past "Collecting files, settings, and applications 0%" by disabling user profile disks, but then on reboot I got another error:
Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
Setuperr.log
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:11:43, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:15:12, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2014-08-17 04:15:23, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2014-08-17 04:15:23, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2014-08-17 08:52:44, Error Mig::CUpgradeTransportPlatform::SetUserContext: Offline platform failed to set the user context
USER00000000[gle=0x000000cb]
2014-08-17 08:52:44, Error MIG Mig::CKnowledgeManager::BeginProcessingContext: Source platform failed to set the user context USER00000000[gle=0x000000cb]
2014-08-17 08:52:44, Error MigApply caught exception: Win32Exception: Can't switch to requested user context: USER00000000.:
A device attached to the system is not functioning. [0x0000001F] int __cdecl Mig::CKnowledgeManager::Apply(class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CUserMappingList *,class UnBCL::Hashtable<class UnBCL::String *,class
UnBCL::String *> *,class Mig::CAgentManager *,struct IMigExecuteProgress *)[gle=0x000000cb]
2014-08-17 08:52:44, Error MIG pDoOnlineApply: Apply operation failed. Error: 0x00000004[gle=0x000000cb]
2014-08-17 08:52:44, Error [0x0802f5] MIG CMediaManager::Close: m_pSelectedTransport->Close(1) failed with Exception Win32Exception: Device was open with readonly access.: Access is denied. [0x00000005] void
__cdecl Mig::CMediaManager::CloseTransport(int)
void __cdecl Mig::CUNCTransport::Close(int).[gle=0x000000cb]
2014-08-17 08:52:44, Error MigCloseCurrentStore caught exception: Win32Exception: Device was open with readonly access.:
Access is denied. [0x00000005] void __cdecl Mig::CMediaManager::CloseTransport(int)
void __cdecl Mig::CUNCTransport::Close(int)[gle=0x000000cb]
2014-08-17 08:52:47, Error MIG Callback_ApplyNewSysMachineSpecific: Migration phase failed. -
Error upgrading company db from patch45 to 47
Hello, Im having an error upgrading my company database to patch 47 from patch 45. while on the upgrade screen, I can see on the status bar that the upgrade process cannot find a "Department" object
Ive done upgrades before with no problem, but this time I had to run it twice because the first time an error showed up that it couldnt upgrade the b1_share folder.
Here is the log file.
UPG_DoObjectUpgradeInt 2, error in object index=124, object name=Departments, object ID=119
STACK:
Frame id=00: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02AD2460
Frame id=01: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A1606
Frame id=02: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A0322
Frame id=03: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A029D
Frame id=04: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x0289E2F4
Frame id=05: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02273CCA
Frame id=06: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x029146C1
Frame id=07: "C:\WINDOWS\system32\kernel32.dll"; base=0x7C800000, offset=0x7C80B50B
C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=3220 TID=256
28/03/2009 13:10:19:443910 Upgrade NoteLogAlways FromVersion=800180 ToVersion=800181 Ending the company upgrade C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=3220 TID=1640Thank you for reply, I found out the reason, there was a record missing in the departments table (record num -2).... i dont know why... we added the record and then the upgrade proceeded as expected.
Thank you. -
I am following bellow link's step to upgrade my repository(MSSQL Server 2005):
[ http://odiexperts.com/tag/repository ]
After completing Work Repository credential I am getting following error:
[2011-03-22T14:45:55.219+05:30] [ODI] [ERROR] [UPGCMP-00303] [upgrade.ODI] Target Work Repository ODI_WREP is invalid.
[2011-03-22T14:45:55.219+05:30] [ODI] [ERROR] [upgrade.ODI] Cause: Target Work Repositority wasn't found in the given schema. Action: Define valid Target Work Repository credentials.
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [ERROR] [UPGAST-01008] [upgrade.FrameworkMR] Schema examination failed for Oracle Data Integrator.
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [ERROR] [upgrade.FrameworkMR] Cause: Repository upgrade framework determined that the examination phase of upgrade failed for the named component. This is often due to a failed prerequisite check. No schemas changes have been made to the component that failed. Action: Check the upgrade log files for the cause of the message. Correct the source of the problem if possible, and retry the examination. Do not go on to perform an actual upgrade in upgrade mode unless all components succeed during examination.
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [NOTIFICATION] [upgrade.FrameworkMR] failure_total 1 m_upgradeMode N
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [NOTIFICATION] [upgrade.FrameworkMR] failure_total 1 m_upgradeMode N
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [ERROR] [UPGAST-01015] [upgrade.FrameworkMR] Some repository upgrade component-specific software modules report failure.
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [ERROR] [upgrade.FrameworkMR] Cause: One or more component-specific software modules returned an error status during repository upgrade. Some other components might have upgraded successfully. Action: Review the upgrade logs to determine which components have failed, and pinpoint the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to rerun the upgrade.
[2011-03-22T14:45:55.219+05:30] [Framework] [NOTIFICATION] [upgrade.Framework] Finished examining components.
[2011-03-22T14:45:55.422+05:30] [FrameworkMR] [NOTIFICATION] [upgrade.FrameworkMR] finalize() instance 1 of 1
Please help out to solve this problem.
Thanks in Advance
BiswajitI believe you are getting the error in Step No 6 . For the corresponding already existing Work repository you would need to provide the new database so that UA can use that to copy the settings .
-
An error has occurred during the execution of the JSPM_MAIN phase.
Hi,
When I run the go.bat for running SLD, I am getting the following exception.
An error has occurred during the execution of the JSPM_MAIN phase.
Cannot initialize application data. Could not determine profile parameters. Error while retrieving value j2ee/dbhost,j2ee/dbname,j2ee/dbtype, with retriever com.sap.sdt.tools.sysinfo.ProfileDataRetriever. Could not extract value with key j2ee/dbhost,j2ee/dbname,j2ee/dbtype, from file D:/usr/sap/CE1/SYS/profile/DEFAULT.PFL. A possible reason could be that the path to the directory containing the sappfpar executable is not included in the PATH environment variable. Could not start process sappfpar. Error while executing process sappfpar. java.io.IOException: CreateProcess: sappfpar all pf=D:/usr/sap/CE1/SYS/profile/DEFAULT.PFL error=2
You can find more information in the log file D:\usr\sap\CE1\J01\j2ee\JSPM\log\log_2007_07_11_18_49_45\JSPM_MAIN_1_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words:
com.sap.sdt.jspm.phases.PhaseTypeJSPM
com.sap.sdt.jspm.gui.JspmUiException
Cannot initialize application data.
JSPM_MAIN
JSPMPhases
NetWeaver Upgrade
SAPJup
Java Upgrade
Any inputs regarding this highly appreciated.
Thanks
SivaYou can look at the following link, it may help
https://www.sdn.sap.com/irj/sdn/directforumsearch?userid=3474257&rankby=10001&start=90 -
An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase
Hi ,
During upgrade of EHP1 - NW 700 i am getting a error in configuration step like An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase
The validation of the deploy queue was not successful. Request to check queue sapjup-queue completed with error. JSPM version is 7.01.4.0.17. Current JSPM log directory is /usr/sap/BIP/DVEBMGS00/j2ee/JSPM/log/log_2009_08_11_11_44_10.
You can find more information in the log file /EHPI/java/log/PREPARE_JSPM_QUEUE_CSZ_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words: com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue com.sap.sdt.sapjup.tools.sapjupjspm.JSPMRapiException The validation of the deploy queue was not successful. PREPARE_JSPM_QUEUE INIT NetWeaver Enhancement Package Installation SAPJup Java Enhancement Package Installation
When reporting problems to SAP Support, attach the trouble ticket file /EHPI/java/log/TroubleTicket_01.txt to your message
Plz help me to analyze on this issue.
Regards,
HariHi Vasil Dimitranov
Thanks for your response.I have went through the log wat u said and found that only Java Patch JSPM is deployed in my system and the others patches are found be taken from the xml file and not deployed due to this below errors.
Aug 11, 2009 11:53:33 AM [Error]: java.lang.NullPointerException:
Aug 11, 2009 11:53:33 AM [Error]: Request to check queue sapjup-queue completed with error.
Aug 11, 2009 11:53:33 AM [Error]: Request to check queue sapjup-queue completed with error.
JSPM version is 7.01.4.0.17. Current JSPM log directory is /usr/sap/BIP/DVEBMGS00/j2ee/JSPM/log/log_2009_08_11_11_44_10
Aug 11, 2009 11:53:33 AM [Info]: Message type received disconnect.
Aug 11, 2009 11:53:33 AM [Info]: Remote connection is closed.
Aug 11, 2009 11:53:34 AM [Warning]: Refusing connection.
Aug 11, 2009 11:53:34 AM [Warning]: Network input/output exception has occurred: Error during read
Aug 11, 2009 11:53:34 AM [Info]: Phase JSPM/JSPMPhases/JSPM_MAIN has been completed.
Aug 11, 2009 11:53:34 AM [Info]: Start time: 2009/08/11 11:45:25.
Aug 11, 2009 11:53:34 AM [Info]: End time: 2009/08/11 11:53:34.
Aug 11, 2009 11:53:34 AM [Info]: Duration: 0:08:08.764.
Aug 11, 2009 11:53:34 AM [Info]: Phase status is initial.
Plz help me on this to analyze regarding the check queue sapjup-queue .
Thanks in Advance.
Regards,
Hari -
"Database Upgrade" hangs at 0% during "Completing the Installation" phase
I 'm now installing the EGRCM8.6.3.4000 environment.
"Database Upgrade" hangs at 0% during "Completing the Installation" phase.
I checked the grc.log, and found the following WARN and DEBUG messages.
2012-07-20 02:40:05,544 WARN [Thread-35] DBConfigManager:1425 Database is not initialized yet.
2012-07-20 03:31:10,412 DEBUG [el.Default (self-tuning)'] GrcConfig:2530 Could not get value for key 'grc.sso.enabled' due to data base is not ready.
The connection to DB is OK, and the status of DB instance is open now.
I can't figure out why the console said "Database is not initialized yet".
Does anyone have a clue about it?
Thanks in advance.
KaiHi yasir,
Thanks for your response.
I haven't finished the installation yet.
"Completing the Installation" I mentioned in previous thread referred to the final installation phase.
After I entered GRC URL (http://hostname:port/grc), the "Database Upgrade" screen hanged at 0% and cannot proceed.
From the grc.log, I can read that the connection seemed OK, and the database also worked well through SQLPLUS.
I am wondering why it happens.
Thanks & Regards,
Kai
Edited by: 917394 on Aug 1, 2012 7:21 PM -
PL/SQL errors upgrading from 8i to 10g
I have a number of packages and functions that were created before my time on oracle 8i that work great there, however I am trying to upgrade the database to Oracle 10G and most all of the packages and functions are now invalid.
Here is an example
Line # = 4 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
Line # = 22 Column # = 18 Error Text = PL/SQL: ORA-00942: table or view does not exist
This is TBORGESON.STVM_PRESHIPTOPRESHIPTRANS
(The_Date in date)
AS
Begin
Insert Into Aswihart.PreshipTrans SELECT a.ID, a.WorkOrderType, a.WorkOrderBaseID,
a.WorkOrderLotID , a.WorkOrderSplitID, a.WorkOrderSubID, a.CustomerID, a.MWPartNumber,
a.CustomerPartNumber, a.CustomerOrderNumber, a.CustomerOrderLineNumber,
a.PurchaseOrderNumber, a.CustomerName, a.CustomerAddr1, a.CustomerAddr2,
a.CustomerAddr3, a.CustomerCity, a.CustomerState, a.CustomerZipCode,
a.CustomerCountry, a.CustomerShowAddr1, a.CustomerShowAddr2, a.CustomerShowAddr3,
a.CustomerShowAddr4, a.CustomerShowAddr5, a.BillToName, a.BillToAddr1, a.BillToAddr2,
a.BillToAddr3, a.BillToCity, a.BillToState, a.BillToZipCode, a.BillToCountry,
a.BillToShowAddr1, a.BillToShowAddr2, a.BillToShowAddr3, a.BillToShowAddr4, a.BillToShowAddr5,
a.DesiredQuantity, a.WantDate, a.QuantityShipped, a.ShipDate, a.NetWeight, a.GrossWeight,
a.AddWeight, a.CalcWeight, a.Territory, a.Unit, a.Price, a.OrderDate, a.RevisionNumber,
a.ShipVia, a.Packages, a.PackingSlip, a.LotNumber, a.Description, a.BillOfLading,
a.ShippingInstructions, a.ShippingInstructions2,
a.ToBeBilled, a.IsInvoiced, a.UnitPrice, a.CurrentDate, a.Class, a.ProductCode,
UPPER(NVL(StockLocation,'SHIPPING')) AS location, a.Salesman,
a.Worksheet, a.Certification, a.Status, a.Initials, a.ProductQuantity, a.StockQuantity,
a.Plant2, a.SCAC, a.NoCont, a.ContType, a.NoSP, a.QuantitySP, a.BarSerial, a.ASN,
a.Tare, a.APW, a.Sample, a.ACT, a.ConsPt, a.UserName, a.CurrentTime, a.LocationCode, a.ProductInStock, a.SpecialPacking, a.SpecialPackingInstructions, a.BarCodeFormat, a.CarrierCode, a.DockNumber, a.SupplierCode, a.ModelYear, a.MaterialIssuer, a.PoolPoint, a.PoolPointAddress, a.EDIAccumShipQty, 'FG' AS Warehouse
FROM aswihart.preship a WHERE (((a.QuantityShipped)>0) AND (a.ShipDate <= The_Date) AND (ltrim(rtrim(a.packingslip)) is not null) AND ((a.ToBeBilled)='Y') AND ((a.IsInvoiced)='N'));
end;
I’m not sure what needs changed to get this to work. The table aswihart.preship definitely does exist, in a different schema in the same database.
Doug Hatfield
Information Systems Manager
Mathew-Warren Spring Division
(574) 722-8397
[email protected]Hi,
you need to grant rights from the owner of the table to the user who ownes the package. In 10g some roles have less rights, so this lost the user rights on the table. So start to make a grant select and insert on the table:
grant select,insert on preship to TBORGESON;See if this helps and get more compiled packages.
Herald ten Dam
htendam.wordpress.com -
XPRA_UPG ERRORS UPGRADING TO ECC6
Hello Gurus
i am getting some errors during XPRAS_UPG.Ugrading from 4.7 to ECC6sr2 on Win2k3 64,SQL2005
I have checked R3up.ECO logs entries:
STARTSAP continues...
stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 12
meaning:
A tool used by tp aborted
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
Process with ID 9616 terminated with status 12
Deleting file c:\usr\sap\put\log\XPRASUPG.ELG
Moving file c:\usr\sap\put\log\PROT.TMP to c:\usr\sap\put\log\SAPR700ZEA.NTP
Moving file c:\usr\sap\put\log\XPRASUPG.ELG to c:\usr\sap\put\tmp\XPRASUPG.ELG
Deleting file c:\usr\sap\put\tmp\MSGIN.LST
Deleting file c:\usr\sap\put\tmp\MSGOUT.LST
Deleting file c:\usr\sap\put\tmp\MSGOUT.LOG
Deleting file c:\usr\sap\put\tmp\XPRASUPG.ELG
Deleting file c:\usr\sap\put\log\TP.ECO
Deleting file c:\usr\sap\put\bin\TRLIST.DMP
Deleting file c:\usr\sap\put\tmp\upalert.log
Deleting file c:\usr\sap\put\tmp\upalert.log
Copying file c:\usr\sap\put\buffer\NDP to c:\usr\sap\put\buffer\AFTXPRAS.BUF
Then i checked ACTUPG.ELG log:
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70010.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70011.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70012.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70013.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70014.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70015.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA700.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70011.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70012.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70013.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70014.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70015.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC700.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC701.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC702.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG700.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG701.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG702.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAD70024.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60008.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60009.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60010.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60011.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60012.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60013.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60014.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60015.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
and
XPRASUPG.ELG:
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR700ZEA.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1AETR012XProgram terminated (job: "RDDEXECL", no.: "16371300")
Long text:
Cause
Program "&V#&", which was started in the background, was terminated
abnormally.
System Response
The system created a job log for the terminated program.
What to do
Proceed as follows:
Log onto the system in which the program was executed. The system is
specified at the beginning of the transport log.
Then call transaction SM37 to display the job log.
Enter "&V#&" as job name and "DDIC" as user name.
Restrict the starting date to the starting date specified in the
transport log.
For the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>.
A list of the jobs satisfying the selection criteria is displayed.
You can display the log by pressing <LS>Job log</>.
If the list contains several jobs, you can select the job with the ID "
&V#&" with <LS>Display</> -> <LS>Job details</> or define further
details for the selection criteria in the initial screen of transaction
SM37.
If the ABAP processor reports cancellation, double-clicking on the
corresponding message in the job log branches to the display of the
corresponding short dump.
1AEPU320 See job log"RDDEXECL""16371300""NTP"
1 ETP111 exit code : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
I tried to execute the job RDDEXECL as DDIC in client 000 and it doesn`t run it quickly cancels with an ABAP dump SYNTAX_ERROR.I checked notes 980194,905029,821032,813658
So i went and checked in SE09 ,request/task,display individually,the transport logs
c:\usr\sap\put\log\*SAPLA70010.NDP* and discovered what might be the source of the problem:in SAPKA70010
different nametabs for table SEOCLASSDF (field CLSSHAREDMEMORY).
different nametabs for table SEOCLASSDF (field WITH_UNIT_TESTS).
different nametabs for table SEOCLASSDF (field DURATION_TYPE).
different nametabs for table SEOCLASSDF (field RISK_LEVEL).
in all the listed transport requests/support packs by ACTUPG.ELG log so how do i fix this problem in order to finish the upgrade?
Any ideas are most welcomeHi Attached is the dump:
Runtime Errors SYNTAX_ERROR
Date and Time 19.04.2008 16:47:26
Short text
Syntax error in program "%_CSCPR ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSCPRPR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "%_CSCPR " in include "%_CSCPR "
in
line 17:
"The type name "SCPR_FLDV_TAB" is ambiguous, since it is also defined i"
"n the Dictionary . control structure introduced with "CLASS" . . . . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSCPRPR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "%_CSCPR ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program %_CSCPR :
"The type name "SCPR_FLDV_TAB" is ambiguous, since it is also defined i"
"n the Dictionary . control structure introduced with "CLASS" . . . . ."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BDX1-sap02"
Network address...... "10.50.74.207"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 8 Bits
Pointer length....... 64 Bits
Work process number.. 11
Shortdump setting.... "full"
Database server... "BDX1-SAP02"
Database type..... "MSSQL"
Database name..... "NDP"
Database user ID.. "ndp"
Char.set.... "English_United State"
SAP kernel....... 700
created (date)... "Feb 3 2008 22:36:38"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 146
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16128
EM...... 29329328
Heap.... 0
Page.... 32768
MM Used. 12958608
MM Free. 3797776
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "E384EEDB5E10F1EC892B001A64C1074E"
Program............. "SAPLSCPRPR"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLSCPRPR" - in
"SCPR_DB_ATTR_GET_LIST".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 1
of the (Include) program "LSCPRPRU17".
The program "SAPLSCPRPR" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 16472600
Source Code Extract
Line
SourceCde
>>>>>
FUNCTION SCPR_DB_ATTR_GET_LIST.
2
3
""Lokale Schnittstelle:
4
*" IMPORTING
5
*" VALUE(CATEGORY) TYPE SCPRATTR-CATEGORY DEFAULT SPACE
6
*" VALUE(COMPONENT) TYPE SCPRATTR-COMPONENT OPTIONAL
7
*" VALUE(RELEASE) TYPE SCPRATTR-MAXRELEASE OPTIONAL
8
*" VALUE(MAX_COUNT) TYPE I OPTIONAL
9
*" EXPORTING
10
*" REFERENCE(SEL_COUNT) TYPE I
11
*" TABLES
12
*" PROFS STRUCTURE SCPRXPROF OPTIONAL
13
*" VERSIONS STRUCTURE SCPRXVERS OPTIONAL
14
*" PROFTYPES TYPE SCPR_XPTYPES OPTIONAL
15
*" CLI_DEPS STRUCTURE SCPRXCLDEP OPTIONAL
16
*" CLI_CASS STRUCTURE SCPRXCLCAS OPTIONAL
17
*" REFTYPES STRUCTURE SCPRXRTYPE OPTIONAL
18
*" REFERENCES STRUCTURE SCPRXREF OPTIONAL
19
*" MODDATES STRUCTURE SCPRXDAT OPTIONAL
20
*" MODIFIERS STRUCTURE SCPRXMOD OPTIONAL
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
2
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
CORR
SY-MSGV2
MERG
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080419
SY-UZEIT
164726
SY-XPROG
SAPLSYST
SY-XFORM
SYSTEM_HOOK_OPEN_DATASET
Active Calls/Events
No. Ty. Program Include Line
Name
7 FUNCTION SAPLSCPRPR LSCPRPRU17 1
SCPR_DB_ATTR_GET_LIST
6 FUNCTION SAPLSCPRPR LSCPRPRU19 60
SCPR_DB_ATTR_GET_ADDITIONAL
5 FUNCTION SAPLSCPRCRITICAL ??? 0
SCPR_SCP2_AFTER_IMPORT
4 FORM SAPLSCTS_EXE_EXP LSCTS_EXE_EXPF02 342
CALL_IMP_METHODS_IN_CLIENT
3 FORM SAPLSCTS_EXE_EXP LSCTS_EXE_EXPF02 87
CALL_IMP_METHODS
2 FUNCTION SAPLSCTS_EXE_EXP LSCTS_EXE_EXPU02 103
TRINT_CALL_AFTER_IMP_METHOD
1 EVENT RDDEXECU RDDEXECU 168
START-OF-SELECTION
Chosen variables
Name
Val.
No. 7 Ty. FUNCTION
Name SCPR_DB_ATTR_GET_LIST
CATEGORY
S
5
3
COMPONENT
222222222222222222222222222222
000000000000000000000000000000
MAX_COUNT
0
0000
0000
RELEASE
2222222222
0000000000
SEL_COUNT
0
0000
0000
CLI_CASS[]
Table[initial]
CLI_DEPS[]
Table[initial]
MODDATES[]
Table[initial]
MODIFIERS[]
Table[initial]
ORGIDS[]
Table[initial]
PROFOUT[]
PROFS[]
PROFTYPES[]
REFERENCES[]
REFTYPES[]
VERSIONS[]
CONTEXT_CLASSIC
2
0
CF_SOL_MANAGER
M
4
D
RTYPE_CUSTREC
CREC
4544
3253
RTYPE_TRANSPORT
TRAN
5544
421E
RTYPE_COPY
COPY
4455
3F09
ACT_DELETE
06
33
06
ACT_SHOW
03
33
03
OTYPE_TABLE
S
5
3
OTYPE_TLOGO
L
4
C
OTYPE_SPECIAL
T
5
4
OTYPE_UNKNOWN
U
5
5
RTYPE_NO_REFTYPE
2222
0000
ACT_MODIFY
02
33
02
OTYPE_VIEW
V
5
6
OTYPE_CLUSTER
C
4
3
ACT_CREATE
01
33
01
COL_BLUE
1
0000
1000
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSCPRPR
5454545555222222222222222222222222222222
310C330202000000000000000000000000000000
ICON_CLI_DEP
@0V@
43542222222222222222
00600000000000000000
CFLAG_ANY
VAL
544
61C
No. 6 Ty. FUNCTION
Name SCPR_DB_ATTR_GET_ADDITIONAL
CATEGORY
S
5
3
READ_ATTR
X
5
8
READ_DOCU
2
0
READ_SWITCH
2
0
READ_TADIR
2
0
READ_TEXT
2
0
REMOVED_BCSETS
Table[initial]
PROFLIST[]
Table IT_44[10683x298]
FUNCTION=SCPR_SCP2_AFTER_IMPORTDATA=BCSETS
Table reference: 27
TABH+ 0(20) = 50C21557FE070000B0C21557FE07000000000000
TABH+ 20(20) = 1B0000002C000000BB2900002A010000FFFFFFFF
TABH+ 40(16) = 04570000080D000010000000C1248001
store = 0x50C21557FE070000
ext1 = 0xB0C21557FE070000
shmId = 0 (0x00000000)
id = 27 (0x1B000000)
label = 44 (0x2C000000)
fill = 10683 (0xBB290000)
leng = 298 (0x2A010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000049
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x70FA6557FE070000
pgHook = 0x70FD6657FE070000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 33 (0x21000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16368 (0xF03F0000)
lineAlloc = 10704 (0xD0290000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x60176657FE070000
collHook = 0x0000000000000000
ext2 = 0xB0416257FE070000
>>>>> 2nd level extension part <<<<<
tabhBack = 0xF0C11557FE070000
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
SY-SUBRC
0
0000
0000
FC_CANCEL
RW
5522
2700
FC_TAKE_NEW
TAKN
5444
41BE
<%_TABLE_SCPRSATTR>
FC_VALUE_HELP
VHLP
5445
68C0
BCSET_RANGE
IEQV1_ISHER_REP_PQUSPIQ_US_NSCH_DEG
4455354544555455555554555554544544422222222222222222222222222222222
95161F93852F250F0153091F53FE338F45700000000000000000000000000000000
FC_DEL_SUBP
DELS
4445
45C3
%_DUMMY$$
2222
0000
%_ITAB_DELETE_LIST
Table[initial]
<WA_PROFLIST>
V1_ISHER_REP_PQUSPIQ_US_NSCH_DEGN00000000000000
5354544555455555554555554544544443333333333333322222222222222222222222222222222222222222222222
61F93852F250F0153091F53FE338F457E0000000000000000000000000000000000000000000000000000000000000
BCSET_RANGES
Table IT_45[10683x67]
FUNCTION=SCPR_DB_ATTR_GET_ADDITIONALDATA=BCSET_RANGES
Table reference: 28
TABH+ 0(20) = 60436257FE070000000000000000000000000000
TABH+ 20(20) = 1C0000002D000000BB29000043000000FFFFFFFF
TABH+ 40(16) = 045900003011000010000000C1248001
store = 0x60436257FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 28 (0x1C000000)
label = 45 (0x2D000000)
fill = 10683 (0xBB290000)
leng = 67 (0x43000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000068
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x40176757FE070000
pgHook = 0x50D89357FE070000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 34 (0x22000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16304 (0xB03F0000)
lineAlloc = 10800 (0x302A0000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
BCSETS_ATTRS
Table[initial]
SYST
000000000000B200000000000000000000000000000000000000000000000000000000000000200000000000000000
000000001000B900000000000000000000000000100020001000000010000000000000000000A10000000000000000
ICON_CLI_CAS
@0V@
43542222222222222222
00600000000000000000
TCATEGORY_CUSY
CUSY
4555
3539
No. 5 Ty. FUNCTION
Name SCPR_SCP2_AFTER_IMPORT
IT_E071
Table IT_42[10683x180]
FUNCTION-POOL=SCTS_EXE_EXPFORM=CALL_IMP_METHODS_IN_CLIENTDATA=LT_E071
Table reference: 26
TABH+ 0(20) = 90EF1457FE07000020444C57FE07000000000000
TABH+ 20(20) = 1A0000002A000000BB290000B4000000FFFFFFFF
TABH+ 40(16) = 044C0000080D000010000000C9248001
store = 0x90EF1457FE070000
ext1 = 0x20444C57FE070000
shmId = 0 (0x00000000)
id = 26 (0x1A000000)
label = 42 (0x2A000000)
fill = 10683 (0xBB290000)
leng = 180 (0xB4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000049
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC01B6757FE070000
pgHook = 0x20276757FE070000
idxPtr = 0xD0B58457FE070000
shmTabhSet = 0x0000000000000000
id = 31 (0x1F000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16368 (0xF03F0000)
lineAlloc = 10736 (0xF0290000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0xD0F75357FE070000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_E071K
Table[initial]
IV_IS_UPGRADE
X
5
8
IV_TRKORR
SAPK700ZEA
54543335442222222222
310B700A510000000000
IT_CLIENT
Table IT_39[1x4]
FUNCTION=TRINT_CALL_AFTER_IMP_METHODDATA=LS_SPEC_PARS-CLIENTS
Table reference: 18
TABH+ 0(20) = A0B91557FE070000000000000000000000000000
TABH+ 20(20) = 12000000270000000100000004000000FFFFFFFF
TABH+ 40(16) = 044C00002813000019000000C1248001
store = 0xA0B91557FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 18 (0x12000000)
label = 39 (0x27000000)
fill = 1 (0x01000000)
leng = 4 (0x04000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000077
occu = 25 (0x19000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x40F75357FE070000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 28 (0x1C000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 25 (0x19000000)
lineAlloc = 25 (0x19000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
<WA_E071>
SAPK700ZEA 010684R3TRSCP2V1_ISHER_REP_PQUSPIQ_US_NSCH_DEG
5454333544222222222233333353555453535454455545555555455555454454442222222222222222222222222222
310B700A5100000000000106842342330261F93852F250F0153091F53FE338F4570000000000000000000000000000
<%_L001>
<%_L001>-PGMID
TTYPE_R3TR
R3TR
5355
2342
SYST-REPID
SAPLSCPRCRITICAL
5454545545454444222222222222222222222222
310C33023294931C000000000000000000000000
<%_L001>-OBJECT
OBJECT_TYPE_SBCSET
SCP2
5453
3302
CONTEXT_CLASSIC
2
0
ACT_STOP_ICON
@3U@
4354
0350
SCPR_AUTHORITY_CHECK
X
5
8
FLD_STATUS_FLD_NM_KEY
FLD_NM_KEY
44454454452222222222
6C4FEDFB590000000000
BCSETS
Table IT_44[10683x298]
BCSET
V1_ISHER_REP_PQUSPIQ_US_NSCH_DEGN00000000000000
5354544555455555554555554544544443333333333333322222222222222222222222222222222222222222222222
61F93852F250F0153091F53FE338F457E0000000000000000000000000000000000000000000000000000000000000
REMOVED_BCSETS
Table[initial]
PCAT_SWITCH
S
5
3
INFO_SEL_REC
4
0000
4000
INFO_NAMESPACE
7
0000
7000
INFO_EQUALIZE
8
0000
8000
INFO_COMMIT
5
0000
5000
INFO_SHOW
6
0000
6000
INFO_SEL_PROFS
9
0000
9000
INFO_COMMIT_SET
10
0000
A000
CFLAG_ANY
VAL
544
61C
T_MESSAGES
Table[initial]
T_MESSAGE
0
3222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SWITCH_BC_SET_ICON
@C1@
4434
0310
LTYPE_FIELD
FLD
4442
6C40
T_MESSAGE-LEVEL
0
3
0
No. 4 Ty. FORM
Name CALL_IMP_METHODS_IN_CLIENT
PS_SPEC_PARS-WITH_ASYNCH_MODE
2
0
SY-XPROG
SAPLSYST
5454555522222222222222222222222222222222
310C393400000000000000000000000000000000
PS_METHOD_CALL-METHOD_FB
SCPR_SCP2_AFTER_IMPORT
545555453544545544545522222222
3302F3302F16452F9D0F2400000000
GC_SCP2_AFTER_IMP
SCPR_SCP2_AFTER_IMPORT
545555453544545544545522222222
3302F3302F16452F9D0F2400000000
PS_SPEC_PARS-ASYNCH_MODE
2
0
GC_PARTNRPR_BACK_TO_STNDRD
1A&1B&1H&1I&2I&3R
34234234234234235
11612618619629632
PV_IS_UPGRADE
X
5
8
PS_CLIENT-CLIENT
222
000
GC_GNS_NO_DIFF
/0*/
2322222222
F0AF000000
LT_E071
Table IT_42[10683x180]
GC_GNS_NO_SPECIFIC
2222222222
FAF0000000
LT_E071K
Table[initial]
RELSET
RNO
544
2EF
PS_SPEC_PARS-WITH_CL_RESULTS
X
5
8
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PV_TRKORR
SAPK700ZEA
54543335442222222222
310B700A510000000000
SYST-REPID
SAPLSCTS_EXE_EXP
5454545554545455222222222222222222222222
310C3343F585F580000000000000000000000000
DEVC_PREFIXNS
N
4
E
PS_SPEC_PARS-CLIENTS
Table IT_39[1x4]
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 3 Ty. FORM
Name CALL_IMP_METHODS
PV_TRKORR
SAPK700ZEA
54543335442222222222
310B700A510000000000
PV_NO_WORK_FOUND
2
0
GC_XPRA_COMPLETED
C
4
3
PT_CLIENT
Table IT_21[1x4]
PROGRAM=RDDEXECUDATA=GT_CLIENT
Table reference: 16
TABH+ 0(20) = 00AD1557FE070000000000000000000000000000
TABH+ 20(20) = 10000000150000000100000004000000FFFFFFFF
TABH+ 40(16) = 040000003808000019000000C1248001
store = 0x00AD1557FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 16 (0x10000000)
label = 21 (0x15000000)
fill = 1 (0x01000000)
leng = 4 (0x04000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000027
occu = 25 (0x19000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x70AC1557FE070000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 19 (0x13000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 25 (0x19000000)
lineAlloc = 25 (0x19000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LS_CLIENT_H
2222
0000
TTRA
T
5
4
SY
000000000000B200000000000000000000000000000000000000000000000000000000000000200000000000000000
000000001000B900000000000000000000000000100020001000000010000000000000000000A10000000000000000
PV_UPDATE_LOCKFLAG
X
5
8
PV_CTC
2
0
PV_STATLOG_FILE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_METHOD_CALL
AFTER_IMP SCPR_SCP2_AFTER_IMPORT #######È#######É###########ÿÿÿÿ
445455445254555545354454554454552222222220000000C0001000C00010000000FFFF
16452F9D003302F3302F16452F9D0F24000000000000000080007000900060000000FFFF
PV_IS_UPGRADE
X
5
8
PV_TOP_LEVEL
2
3
2
PS_SPEC_PARS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_METHOD_CALL-CLIDEP
2
0
PS_SPEC_PARS-WITH_CL_RESULTS
X
5
8
%_VIASELSCR
0
4
No. 2 Ty. FUNCTION
Name TRINT_CALL_AFTER_IMP_METHOD
IS_E070
SAPK700ZEA PRSAP SYSTSAPUSER 20080418120004
5454333544222222222255545222222255555455545222223333333333333322222222222222222222
310B700A51000000000002310000000039343105352000002008041812000400000000000000000000
IT_E071
Table IT_15 -
Error upgrading DB2 database from 8.1 SP4 to 9.2
Has anyone encountered this before:
create_database_objects:
[echo] ***** Calling JDBCDataLoader ** to create database objects and insert seed data
[java] Loading Database...
[java] logFile=upgrade_db.log
[java] user=db2admin
[java] password=********
[java] url=jdbc:bea:db2://pod248:50000;DatabaseName=iwcontnt
[java] files=C:\bea\WEBLOG~2/common/p13n/db/db2/jdbc_index/UPGRADE/jdbc.index,C:\bea\WEBLOG~2/portal/db/db2/jdbc_index/UPGRADE/jdbc.index
[java] driver=weblogic.jdbc.db2.DB2Driver
[java] saltFile=C:\bea\weblogic92\portal\upgrade\db/security/SerializedSystemIni.dat
[java] prodDir=C:\bea\WEBLOG~2
[java] Processing file 'C:\bea\WEBLOG~2\common\p13n\db\db2\jdbc_index\UPGRADE\jdbc.index'
[java] Files=
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_drop_indexes.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_drop_constraints.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_create_tables.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_create_indexes.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/data/required/p13n9_insert_system_data.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/data/required/bt9_insert_system_data.sql
[java] Error = SQLException when executing file file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_drop_indexes.sql
[java] java.lang.Exception: SQLException when executing file file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_drop_indexes.sql
[java] at com.bea.plateng.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:182)
[java] at com.bea.plateng.domain.jdbc.JDBCDataLoader.main(JDBCDataLoader.java:1320)
[java] Caused by: java.sql.SQLException: [BEA][DB2 JDBC Driver]Resource Limits Reached( ALLOCATE MEMORY FOR NEW SQLSTT FAILED ). Diagnostic Info: FUNCTION ID = 0049 , PROBE POINT = 0400 , TRACE POINT = 0030 , SUBCODE1 = 8B0F0000, SUBCODE2 = 78A68A98, SUBCODE3 = 00000000, ERROR MSG = Parser: Memory allocation error.
[java] at weblogic.jdbc.base.BaseExceptions.createException(Ljava.lang.String;Ljava.lang.String;)Ljava.sql.SQLException;(Unknown Source)
[java] at weblogic.jdbc.base.BaseExceptions.getException(I[Ljava.lang.String;)Ljava.sql.SQLException;(Unknown Source)
[java] at weblogic.jdbc.db2.drda.DRDARequest.processCodePoint(IILweblogic.jdbc.base.BaseWarnings;)Z(Unknown Source)
[java] at weblogic.jdbc.db2.drda.DRDAStatementRequest.processCodePoint(IILweblogic.jdbc.base.BaseWarnings;)Z(Unknown Source)
[java] at weblogic.jdbc.db2.drda.DRDAQueryStatementRequest.processCodePoint(IILweblogic.jdbc.base.BaseWarnings;)Z(Unknown Source)
[java] at weblogic.jdbc.db2.drda.DRDARequest.processReply(Lweblogic.jdbc.base.BaseWarnings;)V(Unknown Source)
[java] at weblogic.jdbc.db2.DB2ImplStatement.execute()V(Unknown Source)
[java] at weblogic.jdbc.db2.DB2PackageManager.getMaxSections()I(Unknown Source)
[java] at weblogic.jdbc.db2.DB2PackageManager.initialize(Lweblogic.jdbc.db2.drda.DRDALoginRequest;)V(Unknown Source)
[java] at weblogic.jdbc.db2.DB2ImplConnection.open()V(Unknown Source)
[java] at weblogic.jdbc.base.BaseConnection.connect()V(Unknown Source)
[java] at weblogic.jdbc.base.BaseConnection.setupImplConnection(I)Lweblogic.jdbc.base.BaseImplConnection;(Unknown Source)
[java] at weblogic.jdbc.base.BaseConnection.open(Lweblogic.jdbc.base.BaseConnectionProperties;Lweblogic.jdbc.base.BaseExceptions;Lweblogic.util.UtilDebug;)V(Unknown Source)
[java] Load Failed
[java] at weblogic.jdbc.base.BaseDriver.connect(Ljava.lang.String;Ljava.util.Properties;)Ljava.sql.Connection;(Unknown Source)
[java] at com.bea.plateng.domain.jdbc.JDBCConnectionTester.createConnection(JDBCConnectionTester.java:266)
[java] at com.bea.plateng.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:153)
[java] ... 1 more
I am trying to upgrade the schema for WL/Portal 9.2 from 8.1SP4 using the scripts supplied from BEA using the BEA DB2 driver.
-mikeMichael Melvin wrote:
Has anyone encountered this before:
create_database_objects:
[echo] ***** Calling JDBCDataLoader ** to create database objects and insert seed data
[java] Loading Database...
[java] logFile=upgrade_db.log
[java] user=db2admin
[java] password=********
[java] url=jdbc:bea:db2://pod248:50000;DatabaseName=iwcontnt
[java] files=C:\bea\WEBLOG~2/common/p13n/db/db2/jdbc_index/UPGRADE/jdbc.index,C:\bea\WEBLOG~2/portal/db/db2/jdbc_index/UPGRADE/jdbc.index
[java] driver=weblogic.jdbc.db2.DB2Driver
[java] saltFile=C:\bea\weblogic92\portal\upgrade\db/security/SerializedSystemIni.dat
[java] prodDir=C:\bea\WEBLOG~2
[java] Processing file 'C:\bea\WEBLOG~2\common\p13n\db\db2\jdbc_index\UPGRADE\jdbc.index'
[java] Files=
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_drop_indexes.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_drop_constraints.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_create_tables.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_create_indexes.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/data/required/p13n9_insert_system_data.sql
[java] file:/C:/bea/WEBLOG~2/common/p13n/db/data/required/bt9_insert_system_data.sql
[java] Error = SQLException when executing file file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_drop_indexes.sql
[java] java.lang.Exception: SQLException when executing file file:/C:/bea/WEBLOG~2/common/p13n/db/db2/p13n9_drop_indexes.sql
[java] at com.bea.plateng.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:182)
[java] at com.bea.plateng.domain.jdbc.JDBCDataLoader.main(JDBCDataLoader.java:1320)
[java] Caused by: java.sql.SQLException: [BEA][DB2 JDBC Driver]Resource Limits Reached( ALLOCATE MEMORY FOR NEW SQLSTT FAILED ). Diagnostic Info: FUNCTION ID = 0049 , PROBE POINT = 0400 , TRACE POINT = 0030 , SUBCODE1 = 8B0F0000, SUBCODE2 = 78A68A98, SUBCODE3 = 00000000, ERROR MSG = Parser: Memory allocation error.
[java] at weblogic.jdbc.base.BaseExceptions.createException(Ljava.lang.String;Ljava.lang.String;)Ljava.sql.SQLException;(Unknown Source)
[java] at weblogic.jdbc.base.BaseExceptions.getException(I[Ljava.lang.String;)Ljava.sql.SQLException;(Unknown Source)
[java] at weblogic.jdbc.db2.drda.DRDARequest.processCodePoint(IILweblogic.jdbc.base.BaseWarnings;)Z(Unknown Source)
[java] at weblogic.jdbc.db2.drda.DRDAStatementRequest.processCodePoint(IILweblogic.jdbc.base.BaseWarnings;)Z(Unknown Source)
[java] at weblogic.jdbc.db2.drda.DRDAQueryStatementRequest.processCodePoint(IILweblogic.jdbc.base.BaseWarnings;)Z(Unknown Source)
[java] at weblogic.jdbc.db2.drda.DRDARequest.processReply(Lweblogic.jdbc.base.BaseWarnings;)V(Unknown Source)
[java] at weblogic.jdbc.db2.DB2ImplStatement.execute()V(Unknown Source)
[java] at weblogic.jdbc.db2.DB2PackageManager.getMaxSections()I(Unknown Source)
[java] at weblogic.jdbc.db2.DB2PackageManager.initialize(Lweblogic.jdbc.db2.drda.DRDALoginRequest;)V(Unknown Source)
[java] at weblogic.jdbc.db2.DB2ImplConnection.open()V(Unknown Source)
[java] at weblogic.jdbc.base.BaseConnection.connect()V(Unknown Source)
[java] at weblogic.jdbc.base.BaseConnection.setupImplConnection(I)Lweblogic.jdbc.base.BaseImplConnection;(Unknown Source)
[java] at weblogic.jdbc.base.BaseConnection.open(Lweblogic.jdbc.base.BaseConnectionProperties;Lweblogic.jdbc.base.BaseExceptions;Lweblogic.util.UtilDebug;)V(Unknown Source)
[java] Load Failed
[java] at weblogic.jdbc.base.BaseDriver.connect(Ljava.lang.String;Ljava.util.Properties;)Ljava.sql.Connection;(Unknown Source)
[java] at com.bea.plateng.domain.jdbc.JDBCConnectionTester.createConnection(JDBCConnectionTester.java:266)
[java] at com.bea.plateng.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:153)
[java] ... 1 more
I am trying to upgrade the schema for WL/Portal 9.2 from 8.1SP4 using the scripts supplied from BEA using the BEA DB2 driver.
-mikeHi. You may need to consult your DB2 DBA. This is just the driver reporting that
it's processing failed at the DBMS because of hitting a DBMS resource limit on
memory.
Joe -
Multiple errors upgrading from snow leopard to mountain lion
While attempting to upgrade on an early 2008 Mac Pro, I received the "could not create recovery disk" error on install and had to abort the upgrade. I found online a suggestion of decreasing the size if the main partition (I have no other partitions on the system drive) by a little so that 10.8 can create the recovery drive. When I went I do this it started the process then gave me the error that "I need a newer version of OS X" to complete the task.
I can't create the partition 10.8 needs because I don't have 10.8?
I desperately need a workaround. Any insight would be greatly appreciated, I can offer more details if needed. I do know that the system drive is not a RAID volume, and apples page concerning this error didn't seem to apply to doing an upgrade like this.
Thanks all for your help!!I followed these steps. install gave me the same errors. as far as creating a recovery system goes, since im in snow leopard, i could only intall mountain lion on an external drive. im not sure that really fulfilled the requirements of creating the recovery hd i needed, coulndt find instructions on simply creating a recovery HD on an eternal disk. i did also notice that my internal mac HD system drive is HSF+, or so it appears. could that be the trouble all along?
EDIT: Just reconfirmed as Macintosh HD - Mac OS Extended journaled), so scratch that. i guess im just having trouble "creating a recovery HD" i cannot get the recovery assistant app, because im on snow leopard -
RHEL 4 , ORACLE 10.2.0.1.0 VERSION RAC NODES USING VMware setup.
today i tried to upgrade my test environment to 10.2.0.4.0 (p6810189_10204_Linux-x86.zip patch set installation)
i got a error while running root102.sh on node RAC1.
[root@rac1 install]# ./root102.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
ocrcheck failed. Check /u01/crs/oracle/product/10.2.0/crs/srvm/log for more details
[root@rac1 install]# cd ..
[root@rac1 crs]# cd bin/
[root@rac1 bin]# ./ocrcheck
./ocrcheck: line 67: /u01/crs/oracle/product/10.2.0/crs/bin/ocrcheck.bin: cannot execute binary file
./ocrcheck: line 67: /u01/crs/oracle/product/10.2.0/crs/bin/ocrcheck.bin: Success
[root@rac1 bin]# ./crs_stat -t
./crs_stat: line 67: /u01/crs/oracle/product/10.2.0/crs/bin/crs_stat.bin: cannot execute binary file
./crs_stat: line 67: /u01/crs/oracle/product/10.2.0/crs/bin/crs_stat.bin: Success
[root@rac1 bin]#
i would like to know why this error comes. how to overcome this error.
thanks and regards,Hi,
Did the crs running fine before this?
# /u01/crs/oracle/product/10.2.0/crs/bin/crs_stat -t
Did you shutdown crs before running root102.sh script?
# /u01/crs/oracle/product/10.2.0/crs/bin/crsctl stop crs
What is the output from the log? -
Error Upgrading ADF App to 12c
I have a relatively new ADF application I'm working on. I started in JDeveloper 11g R2, 11.1.2.4.0. Everything works fine in 11g and with the recent release of JDeveloper 12c, we figured since this isn't a production app yet, we might as well upgrade. So I opened my workspace in JDeveloper 12c, 12.1.2.0.0, and on opening the project it went through the project migration wizard, which ran without problems. The problem is when trying to run my app, I get a deployment error. I've tried running the application by right clicking on my main jspx and choosing "Run" (which is how I've always run locally), and also by choosing Application - Deploy - to InegratedWebLogicServer.
Here is the error I am getting on Deploy:
[01:36:29 PM] Deploying Application...
[01:37:54 PM] [Deployer:149192]Operation "deploy" on application "app" is in progress on "DefaultServer".
[01:38:02 PM] [Deployer:149192]Operation "deploy" on application "app" is in progress on "DefaultServer".
[01:38:04 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application app on DefaultServer.: java.lang.ClassCastException: oracle.adf.share.jsp.ADFLibUtils cannot be cast to oracle.adf.library.webapp.LibraryUtils.
[01:38:04 PM] [Deployer:149193]Operation "deploy" on application "app" has failed on "DefaultServer".
[01:38:04 PM] weblogic.application.ModuleException: java.lang.ClassCastException: oracle.adf.share.jsp.ADFLibUtils cannot be cast to oracle.adf.library.webapp.LibraryUtils
[01:38:05 PM] Deployment cancelled.
[01:38:05 PM] ---- Deployment incomplete ----.
[01:38:05 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
And here is the full stack:
####<Sep 11, 2013 1:38:04 PM EDT> <Error> <Deployer> <scottw-vbx-win7> <DefaultServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <24357ef5-1754-474a-a5d2-4aa0837f3696-00000053> <1378921084821> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application "app".>
####<Sep 11, 2013 1:38:04 PM EDT> <Warning> <Deployer> <scottw-vbx-win7> <DefaultServer> <[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <24357ef5-1754-474a-a5d2-4aa0837f3696-00000065> <1378921084841> <BEA-149004> <Failures were detected while initiating deploy task for application "app".>
####<Sep 11, 2013 1:38:04 PM EDT> <Warning> <Deployer> <scottw-vbx-win7> <DefaultServer> <[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <24357ef5-1754-474a-a5d2-4aa0837f3696-00000065> <1378921084842> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: java.lang.ClassCastException: oracle.adf.share.jsp.ADFLibUtils cannot be cast to oracle.adf.library.webapp.LibraryUtils
at weblogic.application.internal.ExtensibleModuleWrapper.start(ExtensibleModuleWrapper.java:140)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:124)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:213)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:208)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:70)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:24)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:729)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:61)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:586)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:148)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:114)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:339)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:846)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1275)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:442)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:176)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:550)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)
Caused By: java.lang.ClassCastException: oracle.adf.share.jsp.ADFLibUtils cannot be cast to oracle.adf.library.webapp.LibraryUtils
at oracle.adf.library.webapp.LibraryFilter.init(LibraryFilter.java:120)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:577)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:137)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:70)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:87)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1789)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2807)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1661)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:822)
at weblogic.application.internal.ExtensibleModuleWrapper$StartStateChange.next(ExtensibleModuleWrapper.java:360)
at weblogic.application.internal.ExtensibleModuleWrapper$StartStateChange.next(ExtensibleModuleWrapper.java:356)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
at weblogic.application.internal.ExtensibleModuleWrapper.start(ExtensibleModuleWrapper.java:138)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:124)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:213)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:208)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:70)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:24)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:729)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:61)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:586)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:148)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:114)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:339)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:846)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1275)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:442)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:176)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:550)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)
>Hello Timo, thanks for your response! Apologies for my delayed response, I started a vacation shortly after my last post.
I have compared my libraries in my app to the libraries in my sample app. My app has all the same libraries plus the following libraries:
ADF Common Web Runtime
Oracle Page Templates
JPS Designtime
Oracle Extended Page Templates
ADF Model Runtime
ADF Faces Databinding Runtime
Because of this, I suspect the problem I'm having is related to removing prefer-web-inf-classes from my weblogic.xml file. Is there something new which is set in 12c which would cause this error that does not cause it in 11g? I do not explicitly set prefer-application-resources or prefer-application-packages anywhere and I can not find those settings when I search my project for those strings. Here is the error when I add prefer-web-inf-classes back into my weblogic.xml file:
<Sep 25, 2013 1:08:05 PM EDT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID "1380128884883" for task "0". Error is: "weblogic.application.ModuleException: weblogic.utils.compiler.ToolFailureException: Neither <prefer-application-packages> nor <prefer-application-resources> can be specified when <prefer-web-inf-classes> is turned on in weblogic.xml"
weblogic.application.ModuleException: weblogic.utils.compiler.ToolFailureException: Neither <prefer-application-packages> nor <prefer-application-resources> can be specified when <prefer-web-inf-classes> is turned on in weblogic.xml
at weblogic.servlet.internal.WebAppModule.initFilterClassLoader(WebAppModule.java:404)
at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:260)
at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:681)
at weblogic.application.internal.flow.ScopedModuleDriver.init(ScopedModuleDriver.java:162)
at weblogic.application.internal.ExtensibleModuleWrapper.init(ExtensibleModuleWrapper.java:98)
Truncated. see log file for complete stacktrace
Caused By: weblogic.utils.compiler.ToolFailureException: Neither <prefer-application-packages> nor <prefer-application-resources> can be specified when <prefer-web-inf-classes> is turned on in weblogic.xml
at weblogic.servlet.utils.WarUtils.configureFCL(WarUtils.java:386)
at weblogic.servlet.internal.WebAppModule.initFilterClassLoader(WebAppModule.java:397)
at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:260)
at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:681)
at weblogic.application.internal.flow.ScopedModuleDriver.init(ScopedModuleDriver.java:162)
Truncated. see log file for complete stacktrace
> -
Error upgrading identity manager from 6.0 to 7.1 - help!!!
Hi all,
When upgrading from 6.0 to 7.1, I get error below when i am trying to access the approval form by going to workitems->approval->click on one of the items in the inbox. Throws a nullpointer exception...see below....
Alex and other experts pls help!!!
Error
An unrecoverable error has occurred processing the request. Contact your system administrator.
Syslog ID = LG-0223-155056.
java.lang.NullPointerException
at com.waveset.ui.util.PageProcessor.generateHTML(Ljava/lang/Throwable;)Ljava/lang/String;(PageProcessor.java:669)
at com.waveset.ui.util.PageProcessor.generateHTML()Ljava/lang/String;(PageProcessor.java:738)
at jsp_servlet._user.__workitemedit._jspService(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V(__workitemedit.java:921)
at weblogic.servlet.jsp.JspBase.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava/lang/Object;(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lweblogic/servlet/internal/FilterChainImpl;)V(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V(ServletStubImpl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava/lang/Object;(WebAppServletContext.java:6985)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic/security/subject/AbstractSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic/servlet/internal/ServletRequestImpl;Lweblogic/servlet/internal/ServletResponseImpl;)V(WebAppServletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic/kernel/ExecuteThread;)V(ServletRequestImpl.java:2766)
at weblogic.kernel.ExecuteThread.execute(Lweblogic/kernel/ExecuteRequest;)V(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:183)
at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread;)V(Unknown Source)
thanks a lot!
vikAlex,
Thanks a lot for the quick reply. I did a whole lot of things. I cleaned up the work directory in weblogic. Also, I did upgrade using the supplied scripts (upgradeto71from60.oracle). When I turned on the trace, this is the exact stack trace from the logs ( see below). Will installing the 7.1 Update 1 help? Right now I am at 7.1 without any updates. Also, I cant access the link for Update 1 Patch 10. Can you please point me to the download area...thanks!
20090220 13:15:28.154 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML() Exit void
20090220 13:15:31.740 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML() Entry no args
20090220 13:15:31.740 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Component) Entry arg1=root=com.waveset.ui.util.html.HtmlPage@40fd3dd
20090220 13:15:31.740 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) WavesetProperties#getString() Entry arg1=name=ui.Renderer
20090220 13:15:31.740 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) WavesetProperties#getProperty() Entry arg1=name=ui.Renderer
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) WavesetProperties#getProperty() Exit returned= null
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) WavesetProperties#getString() Exit returned= null
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) HtmlPage#toHTML(Renderer) Entry arg1=b=
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Component) Catch java.lang.NullPointerException
at com.waveset.ui.util.html.Component.getString(Lcom/waveset/ui/util/RequestState;Ljava/lang/Object;)Ljava/lang/String;(Component.java:744)
at com.waveset.ui.util.html.HtmlPage.generateJavascript(Lcom/waveset/ui/util/RequestState;Lcom/waveset/ui/util/html/HtmlBuffer;)V(HtmlPage.java:466)
at com.waveset.ui.util.html.HtmlPage.toHTML(Lcom/waveset/ui/util/html/Renderer;)V(HtmlPage.java:654)
at com.waveset.ui.util.html.Renderer.renderHtmlPage(Lcom/waveset/ui/util/html/HtmlPage;)V(Renderer.java:786)
at com.waveset.ui.util.html.HtmlPage.render(Lcom/waveset/ui/util/html/Renderer;)V(HtmlPage.java:548)
at com.waveset.ui.util.PageProcessor.generateHTML(Lcom/waveset/ui/util/html/Component;)Ljava/lang/String;(PageProcessor.java:600)
at com.waveset.ui.util.PageProcessor.generateHTML()Ljava/lang/String;(PageProcessor.java:726)
at jsp_servlet._user.__workitemedit._jspService(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V(__workitemedit.java:921)
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Throwable) Entry arg1=t=java.lang.NullPointerException
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Throwable) Data msg== java.lang.NullPointerException
20090220 13:15:31.741 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Throwable) Entry arg1=t=java.lang.NullPointerException
20090220 13:15:31.742 ExecuteThread: '14' for queue: 'weblogic.kernel.Default'(0xbc6fa4b8) PageProcessor#generateHTML(Throwable) Data msg== java.lang.NullPointerException
Maybe you are looking for
-
What DVI connector do I need for a MBP
what type of DVI connector do I need to get for my MBP to connect to a standard LCD projector
-
Hi, I've been setting up SCCM 2012 and mostly following the instructions and guides at http://www.windows-noob.com/forums/index.php?/topic/4045-system-center-2012-configuration-manager-guides/. We used to use a WSUS server to deploy our updates but
-
My apple TV won't connect to my internet. It says ' there is a problem with your connection please check in your settings and try again' but I am using the internet on my laptop right next to where I am trying to set up my apple TV and the signal str
-
LOV return value to submit multi LOV/Text field order by value!
I have nested LOV and return value reflected to another LOV/Text field by order wise. My problem, The return value LOV or Text field should be dispay with one by one values order by (Dynamic).here i using the query in each LOV source. select DMS_DD
-
Select Expert - Formula : Some clarifications
Hi, Can anyone explain the below formula in Select Expert: IF {?param} = "AAA" THEN {Command.CD} = "ALL" ELSE IF {?param} = "BBB" THEN NOT({Command.CD} = "BALL") ELSE true My doubts are: 1) This formula will be executed after the query in the 'Comman