Error upgrading 4.1 IPS to 5.0: Error converting config
Error Message:
Error converting config. Install aborted.
Any help? Thanks in advance
There is a bug with the converter which will be fixed in 4.1(6). A workaround is to reset all sigs to default settings, apply a sigupdate, and re-try the 5.0 upgrade.
Similar Messages
-
Error upgrading windows 10 build 10049 from 10041 error 0x80070012
i don't know how i can fix this error. i got the same error when trying to fix the store beta issue with mail, calendar and people apps.
ps sorry for my English.Follow this method which is posted in Insider Hub :
In this build, the Mail, Calendar, and People apps may be broken due to a licensing issue with the Store Beta. To get these apps working again, you need to follow these steps:
Open powershell as administrator
Run the command Get-appxprovisionedpackage –online | where-object {$_.packagename –like “*windowscommunicationsapps*”} | remove-appxprovisionedpackage –online
Re-install Mail, People and Calendar from the Store (green tile) -
Error when attempting to upgrade SSM to IPS 6.1
I'm currently running 6.0(4)E1 and when I attempt to upgrade it says "Cannot upgrade software on the sensor. This package cannot be installed on the SSM-IPS10 platform."
I've tried upgrading via IDM, FTP, SCP and I get the same error.
I'm attempting to upgrade using the IPS-AIM-K9-6.1-1-E1 package.The SSM files you are pointing to at http://www.cisco.com/cgi-bin/tablebuild.pl/ips6-asa-aip are System Images.
System Images should only be used when trying to get the module to look like it came fresh from manufacturing. All configs are removed during the System Image process.
When trying to upgrade from one version to another you would not use System Images. Instead you would use the upgrade files.
Upgrade files for all sensors are located here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ips6
With signature updates being located here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ips6-sigup
The SSM uses the same Upgrade files as every other sensor with the exception of the AIM-IPS modules for the ISR Routers.
The AIM has a Mips processor rather than an x86 processor.
So the AIM has it's own set of upgrade files with binaries compiled for Mips.
ALL other sensors (including the SSM) use the standard set of upgrade files.
When in doubt it is best to read the README file for the particular version you are wanting to load. The README should be able to tell you which files are applicable to your sensor models. -
XPRA_UPG ERRORS UPGRADING TO ECC6
Hello Gurus
i am getting some errors during XPRAS_UPG.Ugrading from 4.7 to ECC6sr2 on Win2k3 64,SQL2005
I have checked R3up.ECO logs entries:
STARTSAP continues...
stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 12
meaning:
A tool used by tp aborted
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
Process with ID 9616 terminated with status 12
Deleting file c:\usr\sap\put\log\XPRASUPG.ELG
Moving file c:\usr\sap\put\log\PROT.TMP to c:\usr\sap\put\log\SAPR700ZEA.NTP
Moving file c:\usr\sap\put\log\XPRASUPG.ELG to c:\usr\sap\put\tmp\XPRASUPG.ELG
Deleting file c:\usr\sap\put\tmp\MSGIN.LST
Deleting file c:\usr\sap\put\tmp\MSGOUT.LST
Deleting file c:\usr\sap\put\tmp\MSGOUT.LOG
Deleting file c:\usr\sap\put\tmp\XPRASUPG.ELG
Deleting file c:\usr\sap\put\log\TP.ECO
Deleting file c:\usr\sap\put\bin\TRLIST.DMP
Deleting file c:\usr\sap\put\tmp\upalert.log
Deleting file c:\usr\sap\put\tmp\upalert.log
Copying file c:\usr\sap\put\buffer\NDP to c:\usr\sap\put\buffer\AFTXPRAS.BUF
Then i checked ACTUPG.ELG log:
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70010.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70011.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70012.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70013.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70014.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70015.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA700.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70011.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70012.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70013.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70014.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70015.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC700.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC701.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC702.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG700.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG701.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG702.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAD70024.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60008.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60009.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60010.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60011.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60012.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60013.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60014.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAE60015.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
and
XPRASUPG.ELG:
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR700ZEA.NDP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1AETR012XProgram terminated (job: "RDDEXECL", no.: "16371300")
Long text:
Cause
Program "&V#&", which was started in the background, was terminated
abnormally.
System Response
The system created a job log for the terminated program.
What to do
Proceed as follows:
Log onto the system in which the program was executed. The system is
specified at the beginning of the transport log.
Then call transaction SM37 to display the job log.
Enter "&V#&" as job name and "DDIC" as user name.
Restrict the starting date to the starting date specified in the
transport log.
For the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>.
A list of the jobs satisfying the selection criteria is displayed.
You can display the log by pressing <LS>Job log</>.
If the list contains several jobs, you can select the job with the ID "
&V#&" with <LS>Display</> -> <LS>Job details</> or define further
details for the selection criteria in the initial screen of transaction
SM37.
If the ABAP processor reports cancellation, double-clicking on the
corresponding message in the job log branches to the display of the
corresponding short dump.
1AEPU320 See job log"RDDEXECL""16371300""NTP"
1 ETP111 exit code : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
I tried to execute the job RDDEXECL as DDIC in client 000 and it doesn`t run it quickly cancels with an ABAP dump SYNTAX_ERROR.I checked notes 980194,905029,821032,813658
So i went and checked in SE09 ,request/task,display individually,the transport logs
c:\usr\sap\put\log\*SAPLA70010.NDP* and discovered what might be the source of the problem:in SAPKA70010
different nametabs for table SEOCLASSDF (field CLSSHAREDMEMORY).
different nametabs for table SEOCLASSDF (field WITH_UNIT_TESTS).
different nametabs for table SEOCLASSDF (field DURATION_TYPE).
different nametabs for table SEOCLASSDF (field RISK_LEVEL).
in all the listed transport requests/support packs by ACTUPG.ELG log so how do i fix this problem in order to finish the upgrade?
Any ideas are most welcomeHi Attached is the dump:
Runtime Errors SYNTAX_ERROR
Date and Time 19.04.2008 16:47:26
Short text
Syntax error in program "%_CSCPR ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSCPRPR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "%_CSCPR " in include "%_CSCPR "
in
line 17:
"The type name "SCPR_FLDV_TAB" is ambiguous, since it is also defined i"
"n the Dictionary . control structure introduced with "CLASS" . . . . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSCPRPR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "%_CSCPR ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program %_CSCPR :
"The type name "SCPR_FLDV_TAB" is ambiguous, since it is also defined i"
"n the Dictionary . control structure introduced with "CLASS" . . . . ."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BDX1-sap02"
Network address...... "10.50.74.207"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 8 Bits
Pointer length....... 64 Bits
Work process number.. 11
Shortdump setting.... "full"
Database server... "BDX1-SAP02"
Database type..... "MSSQL"
Database name..... "NDP"
Database user ID.. "ndp"
Char.set.... "English_United State"
SAP kernel....... 700
created (date)... "Feb 3 2008 22:36:38"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 146
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16128
EM...... 29329328
Heap.... 0
Page.... 32768
MM Used. 12958608
MM Free. 3797776
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "E384EEDB5E10F1EC892B001A64C1074E"
Program............. "SAPLSCPRPR"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLSCPRPR" - in
"SCPR_DB_ATTR_GET_LIST".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 1
of the (Include) program "LSCPRPRU17".
The program "SAPLSCPRPR" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 16472600
Source Code Extract
Line
SourceCde
>>>>>
FUNCTION SCPR_DB_ATTR_GET_LIST.
2
3
""Lokale Schnittstelle:
4
*" IMPORTING
5
*" VALUE(CATEGORY) TYPE SCPRATTR-CATEGORY DEFAULT SPACE
6
*" VALUE(COMPONENT) TYPE SCPRATTR-COMPONENT OPTIONAL
7
*" VALUE(RELEASE) TYPE SCPRATTR-MAXRELEASE OPTIONAL
8
*" VALUE(MAX_COUNT) TYPE I OPTIONAL
9
*" EXPORTING
10
*" REFERENCE(SEL_COUNT) TYPE I
11
*" TABLES
12
*" PROFS STRUCTURE SCPRXPROF OPTIONAL
13
*" VERSIONS STRUCTURE SCPRXVERS OPTIONAL
14
*" PROFTYPES TYPE SCPR_XPTYPES OPTIONAL
15
*" CLI_DEPS STRUCTURE SCPRXCLDEP OPTIONAL
16
*" CLI_CASS STRUCTURE SCPRXCLCAS OPTIONAL
17
*" REFTYPES STRUCTURE SCPRXRTYPE OPTIONAL
18
*" REFERENCES STRUCTURE SCPRXREF OPTIONAL
19
*" MODDATES STRUCTURE SCPRXDAT OPTIONAL
20
*" MODIFIERS STRUCTURE SCPRXMOD OPTIONAL
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
2
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
CORR
SY-MSGV2
MERG
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080419
SY-UZEIT
164726
SY-XPROG
SAPLSYST
SY-XFORM
SYSTEM_HOOK_OPEN_DATASET
Active Calls/Events
No. Ty. Program Include Line
Name
7 FUNCTION SAPLSCPRPR LSCPRPRU17 1
SCPR_DB_ATTR_GET_LIST
6 FUNCTION SAPLSCPRPR LSCPRPRU19 60
SCPR_DB_ATTR_GET_ADDITIONAL
5 FUNCTION SAPLSCPRCRITICAL ??? 0
SCPR_SCP2_AFTER_IMPORT
4 FORM SAPLSCTS_EXE_EXP LSCTS_EXE_EXPF02 342
CALL_IMP_METHODS_IN_CLIENT
3 FORM SAPLSCTS_EXE_EXP LSCTS_EXE_EXPF02 87
CALL_IMP_METHODS
2 FUNCTION SAPLSCTS_EXE_EXP LSCTS_EXE_EXPU02 103
TRINT_CALL_AFTER_IMP_METHOD
1 EVENT RDDEXECU RDDEXECU 168
START-OF-SELECTION
Chosen variables
Name
Val.
No. 7 Ty. FUNCTION
Name SCPR_DB_ATTR_GET_LIST
CATEGORY
S
5
3
COMPONENT
222222222222222222222222222222
000000000000000000000000000000
MAX_COUNT
0
0000
0000
RELEASE
2222222222
0000000000
SEL_COUNT
0
0000
0000
CLI_CASS[]
Table[initial]
CLI_DEPS[]
Table[initial]
MODDATES[]
Table[initial]
MODIFIERS[]
Table[initial]
ORGIDS[]
Table[initial]
PROFOUT[]
PROFS[]
PROFTYPES[]
REFERENCES[]
REFTYPES[]
VERSIONS[]
CONTEXT_CLASSIC
2
0
CF_SOL_MANAGER
M
4
D
RTYPE_CUSTREC
CREC
4544
3253
RTYPE_TRANSPORT
TRAN
5544
421E
RTYPE_COPY
COPY
4455
3F09
ACT_DELETE
06
33
06
ACT_SHOW
03
33
03
OTYPE_TABLE
S
5
3
OTYPE_TLOGO
L
4
C
OTYPE_SPECIAL
T
5
4
OTYPE_UNKNOWN
U
5
5
RTYPE_NO_REFTYPE
2222
0000
ACT_MODIFY
02
33
02
OTYPE_VIEW
V
5
6
OTYPE_CLUSTER
C
4
3
ACT_CREATE
01
33
01
COL_BLUE
1
0000
1000
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSCPRPR
5454545555222222222222222222222222222222
310C330202000000000000000000000000000000
ICON_CLI_DEP
@0V@
43542222222222222222
00600000000000000000
CFLAG_ANY
VAL
544
61C
No. 6 Ty. FUNCTION
Name SCPR_DB_ATTR_GET_ADDITIONAL
CATEGORY
S
5
3
READ_ATTR
X
5
8
READ_DOCU
2
0
READ_SWITCH
2
0
READ_TADIR
2
0
READ_TEXT
2
0
REMOVED_BCSETS
Table[initial]
PROFLIST[]
Table IT_44[10683x298]
FUNCTION=SCPR_SCP2_AFTER_IMPORTDATA=BCSETS
Table reference: 27
TABH+ 0(20) = 50C21557FE070000B0C21557FE07000000000000
TABH+ 20(20) = 1B0000002C000000BB2900002A010000FFFFFFFF
TABH+ 40(16) = 04570000080D000010000000C1248001
store = 0x50C21557FE070000
ext1 = 0xB0C21557FE070000
shmId = 0 (0x00000000)
id = 27 (0x1B000000)
label = 44 (0x2C000000)
fill = 10683 (0xBB290000)
leng = 298 (0x2A010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000049
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x70FA6557FE070000
pgHook = 0x70FD6657FE070000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 33 (0x21000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16368 (0xF03F0000)
lineAlloc = 10704 (0xD0290000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x60176657FE070000
collHook = 0x0000000000000000
ext2 = 0xB0416257FE070000
>>>>> 2nd level extension part <<<<<
tabhBack = 0xF0C11557FE070000
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
SY-SUBRC
0
0000
0000
FC_CANCEL
RW
5522
2700
FC_TAKE_NEW
TAKN
5444
41BE
<%_TABLE_SCPRSATTR>
FC_VALUE_HELP
VHLP
5445
68C0
BCSET_RANGE
IEQV1_ISHER_REP_PQUSPIQ_US_NSCH_DEG
4455354544555455555554555554544544422222222222222222222222222222222
95161F93852F250F0153091F53FE338F45700000000000000000000000000000000
FC_DEL_SUBP
DELS
4445
45C3
%_DUMMY$$
2222
0000
%_ITAB_DELETE_LIST
Table[initial]
<WA_PROFLIST>
V1_ISHER_REP_PQUSPIQ_US_NSCH_DEGN00000000000000
5354544555455555554555554544544443333333333333322222222222222222222222222222222222222222222222
61F93852F250F0153091F53FE338F457E0000000000000000000000000000000000000000000000000000000000000
BCSET_RANGES
Table IT_45[10683x67]
FUNCTION=SCPR_DB_ATTR_GET_ADDITIONALDATA=BCSET_RANGES
Table reference: 28
TABH+ 0(20) = 60436257FE070000000000000000000000000000
TABH+ 20(20) = 1C0000002D000000BB29000043000000FFFFFFFF
TABH+ 40(16) = 045900003011000010000000C1248001
store = 0x60436257FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 28 (0x1C000000)
label = 45 (0x2D000000)
fill = 10683 (0xBB290000)
leng = 67 (0x43000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000068
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x40176757FE070000
pgHook = 0x50D89357FE070000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 34 (0x22000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16304 (0xB03F0000)
lineAlloc = 10800 (0x302A0000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
BCSETS_ATTRS
Table[initial]
SYST
000000000000B200000000000000000000000000000000000000000000000000000000000000200000000000000000
000000001000B900000000000000000000000000100020001000000010000000000000000000A10000000000000000
ICON_CLI_CAS
@0V@
43542222222222222222
00600000000000000000
TCATEGORY_CUSY
CUSY
4555
3539
No. 5 Ty. FUNCTION
Name SCPR_SCP2_AFTER_IMPORT
IT_E071
Table IT_42[10683x180]
FUNCTION-POOL=SCTS_EXE_EXPFORM=CALL_IMP_METHODS_IN_CLIENTDATA=LT_E071
Table reference: 26
TABH+ 0(20) = 90EF1457FE07000020444C57FE07000000000000
TABH+ 20(20) = 1A0000002A000000BB290000B4000000FFFFFFFF
TABH+ 40(16) = 044C0000080D000010000000C9248001
store = 0x90EF1457FE070000
ext1 = 0x20444C57FE070000
shmId = 0 (0x00000000)
id = 26 (0x1A000000)
label = 42 (0x2A000000)
fill = 10683 (0xBB290000)
leng = 180 (0xB4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000049
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC01B6757FE070000
pgHook = 0x20276757FE070000
idxPtr = 0xD0B58457FE070000
shmTabhSet = 0x0000000000000000
id = 31 (0x1F000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16368 (0xF03F0000)
lineAlloc = 10736 (0xF0290000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0xD0F75357FE070000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_E071K
Table[initial]
IV_IS_UPGRADE
X
5
8
IV_TRKORR
SAPK700ZEA
54543335442222222222
310B700A510000000000
IT_CLIENT
Table IT_39[1x4]
FUNCTION=TRINT_CALL_AFTER_IMP_METHODDATA=LS_SPEC_PARS-CLIENTS
Table reference: 18
TABH+ 0(20) = A0B91557FE070000000000000000000000000000
TABH+ 20(20) = 12000000270000000100000004000000FFFFFFFF
TABH+ 40(16) = 044C00002813000019000000C1248001
store = 0xA0B91557FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 18 (0x12000000)
label = 39 (0x27000000)
fill = 1 (0x01000000)
leng = 4 (0x04000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000077
occu = 25 (0x19000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x40F75357FE070000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 28 (0x1C000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 25 (0x19000000)
lineAlloc = 25 (0x19000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
<WA_E071>
SAPK700ZEA 010684R3TRSCP2V1_ISHER_REP_PQUSPIQ_US_NSCH_DEG
5454333544222222222233333353555453535454455545555555455555454454442222222222222222222222222222
310B700A5100000000000106842342330261F93852F250F0153091F53FE338F4570000000000000000000000000000
<%_L001>
<%_L001>-PGMID
TTYPE_R3TR
R3TR
5355
2342
SYST-REPID
SAPLSCPRCRITICAL
5454545545454444222222222222222222222222
310C33023294931C000000000000000000000000
<%_L001>-OBJECT
OBJECT_TYPE_SBCSET
SCP2
5453
3302
CONTEXT_CLASSIC
2
0
ACT_STOP_ICON
@3U@
4354
0350
SCPR_AUTHORITY_CHECK
X
5
8
FLD_STATUS_FLD_NM_KEY
FLD_NM_KEY
44454454452222222222
6C4FEDFB590000000000
BCSETS
Table IT_44[10683x298]
BCSET
V1_ISHER_REP_PQUSPIQ_US_NSCH_DEGN00000000000000
5354544555455555554555554544544443333333333333322222222222222222222222222222222222222222222222
61F93852F250F0153091F53FE338F457E0000000000000000000000000000000000000000000000000000000000000
REMOVED_BCSETS
Table[initial]
PCAT_SWITCH
S
5
3
INFO_SEL_REC
4
0000
4000
INFO_NAMESPACE
7
0000
7000
INFO_EQUALIZE
8
0000
8000
INFO_COMMIT
5
0000
5000
INFO_SHOW
6
0000
6000
INFO_SEL_PROFS
9
0000
9000
INFO_COMMIT_SET
10
0000
A000
CFLAG_ANY
VAL
544
61C
T_MESSAGES
Table[initial]
T_MESSAGE
0
3222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SWITCH_BC_SET_ICON
@C1@
4434
0310
LTYPE_FIELD
FLD
4442
6C40
T_MESSAGE-LEVEL
0
3
0
No. 4 Ty. FORM
Name CALL_IMP_METHODS_IN_CLIENT
PS_SPEC_PARS-WITH_ASYNCH_MODE
2
0
SY-XPROG
SAPLSYST
5454555522222222222222222222222222222222
310C393400000000000000000000000000000000
PS_METHOD_CALL-METHOD_FB
SCPR_SCP2_AFTER_IMPORT
545555453544545544545522222222
3302F3302F16452F9D0F2400000000
GC_SCP2_AFTER_IMP
SCPR_SCP2_AFTER_IMPORT
545555453544545544545522222222
3302F3302F16452F9D0F2400000000
PS_SPEC_PARS-ASYNCH_MODE
2
0
GC_PARTNRPR_BACK_TO_STNDRD
1A&1B&1H&1I&2I&3R
34234234234234235
11612618619629632
PV_IS_UPGRADE
X
5
8
PS_CLIENT-CLIENT
222
000
GC_GNS_NO_DIFF
/0*/
2322222222
F0AF000000
LT_E071
Table IT_42[10683x180]
GC_GNS_NO_SPECIFIC
2222222222
FAF0000000
LT_E071K
Table[initial]
RELSET
RNO
544
2EF
PS_SPEC_PARS-WITH_CL_RESULTS
X
5
8
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PV_TRKORR
SAPK700ZEA
54543335442222222222
310B700A510000000000
SYST-REPID
SAPLSCTS_EXE_EXP
5454545554545455222222222222222222222222
310C3343F585F580000000000000000000000000
DEVC_PREFIXNS
N
4
E
PS_SPEC_PARS-CLIENTS
Table IT_39[1x4]
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 3 Ty. FORM
Name CALL_IMP_METHODS
PV_TRKORR
SAPK700ZEA
54543335442222222222
310B700A510000000000
PV_NO_WORK_FOUND
2
0
GC_XPRA_COMPLETED
C
4
3
PT_CLIENT
Table IT_21[1x4]
PROGRAM=RDDEXECUDATA=GT_CLIENT
Table reference: 16
TABH+ 0(20) = 00AD1557FE070000000000000000000000000000
TABH+ 20(20) = 10000000150000000100000004000000FFFFFFFF
TABH+ 40(16) = 040000003808000019000000C1248001
store = 0x00AD1557FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 16 (0x10000000)
label = 21 (0x15000000)
fill = 1 (0x01000000)
leng = 4 (0x04000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000027
occu = 25 (0x19000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x70AC1557FE070000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 19 (0x13000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 25 (0x19000000)
lineAlloc = 25 (0x19000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LS_CLIENT_H
2222
0000
TTRA
T
5
4
SY
000000000000B200000000000000000000000000000000000000000000000000000000000000200000000000000000
000000001000B900000000000000000000000000100020001000000010000000000000000000A10000000000000000
PV_UPDATE_LOCKFLAG
X
5
8
PV_CTC
2
0
PV_STATLOG_FILE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_METHOD_CALL
AFTER_IMP SCPR_SCP2_AFTER_IMPORT #######È#######É###########ÿÿÿÿ
445455445254555545354454554454552222222220000000C0001000C00010000000FFFF
16452F9D003302F3302F16452F9D0F24000000000000000080007000900060000000FFFF
PV_IS_UPGRADE
X
5
8
PV_TOP_LEVEL
2
3
2
PS_SPEC_PARS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_METHOD_CALL-CLIDEP
2
0
PS_SPEC_PARS-WITH_CL_RESULTS
X
5
8
%_VIASELSCR
0
4
No. 2 Ty. FUNCTION
Name TRINT_CALL_AFTER_IMP_METHOD
IS_E070
SAPK700ZEA PRSAP SYSTSAPUSER 20080418120004
5454333544222222222255545222222255555455545222223333333333333322222222222222222222
310B700A51000000000002310000000039343105352000002008041812000400000000000000000000
IT_E071
Table IT_15 -
Cannot upgrade my ipod touch to iOS5.1 - error:"the network connection could not be established" Although I can access the itunes store.
Running Mac OS 10.7.3 using itunes 10.6
unplugged other USB devices, disabled security, restarted computer. Next?Try changing the DNS as described here:
iOS 5 update issues "Network...: Apple Support Communities -
I want to backup my phone before upgrading to ios5 but I get an error message: itunes could not back up the iphone because a session could not be started with the iphone. I want to go to ios5, but I do not want to lose everything. I've gone to my device under preferences and I have no backup currently.
I have a Verizon Iphone 4 and a PC.
Please help me..Hi Judy,
Im using windows 7 and im not a computer wizard, i've tried the method by using the instruction for Win7 but it does not work, same problem still exist.
Could uninstall itunes and reinstall it back on my pc fix my problem, please advise...... Many Thanks!
VBR,
ray -
Error upgrading from APEX 4.0.1.00.03 to 4.1.1
I receive this error. In my opinion the problem could be related to the presence of one personalized authentication schemas, based on a DB function, taken from a Packaged application, some years ago, called "menu_framework".
This is the error report:
-- Now beginning upgrade. This will take several minutes.-------
-- Ensuring template names are unique -------
-- Migrating metadata to new schema -------
-- Switching builder to new schema -------
begin
ERRORE alla riga 1:
ORA-00600: codice di errore interno, argomenti: [kgiinb_invalid_obj],
[0x26962168], [0x1A1042F4], [], [], [], [], [], [], [], [], []
1) after the error trap, I copied the Image folder and tried to launch APEX. It was possible to lunch the development pages, but impossible to execute any application with the error: Authentication Schema not Supported
2) then decided to downgrade to APEX 4.0, following the proper instructions: received a similar error:
SQL> exec apex_040000.wwv_flow_upgrade.switch_schemas('APEX_040100','APEX_040000
BEGIN apex_040000.wwv_flow_upgrade.switch_schemas('APEX_040100','APEX_040000');
END;
ERRORE alla riga 1:
ORA-00600: codice di errore interno, argomenti: [kgiinb_invalid_obj],
[0x16D5D9E4], [0x27F2074C], [], [], [], [], [], [], [], [], []
The execution of application reported the same problem.
Then decided to restore the entirre DB.
Where is my problem?
Are my suspects real or the Authentication schema malfunctiong is a conseguence of the upgrade error?
Thank you, AngeloI think this has something to do with your database and now APEX is affected. I don't think it is an APEX issue. Which version of database are you using? Maybe you should patch it to a more stable version.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?
Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.
-
What can I do about this:
After upgrading to firefox 6, I get this error.
When I click to open Firefox, A box open with the following error:
JAVASCRIPT Application
TypeError: Components.classes[cid] is undefined?
After I click close on the box, then Firefox will start. I really just want to get the error fixed so that when I want firefox open, I don't have to see this box anymore.You need to figure out which add-on is causing that error and disable it until the developer of that add-on fixes it. There may be an error message about that in the Error Console, accessed through the Web Developer menu item or through {Ctrl + Shft + J}.
Also see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
I just got this error while upgrading the kernel after a fresh-install:
error: could not prepare transaction
error: failed to commit transaction (confliting files)
kernel26: /lib/modules/2.6.23-ARCH/modules.alias exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.ccwmap exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.dep exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.ieee13945map exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.inputmap exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.isapnpmap exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.ofmap exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.pcimap exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.seriomap exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.symbols exists in filesystem
kernel26: /lib/modules/2.6.23-ARCH/modules.usbmap exists in filesystem
errors occurred, no packages were upgraded.
Any ideias why?Not really, but that's harmless. Just run pacman -Syuf.
-
REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade.
Hi Experts,
I have done the recording for FK05 and created functionmodule for the same. But when I use that function module in my custom program or if I try directly execute the FM, I am getting dump like syntax error. So I did syntax check and tried to activate, I am getting "REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade" error.
Please help me soon to resolve this issue.
Thanks in advance.
ShreyanshHi
Goto main function group include name attributes tab and double click.
once the include is opened, try to activate it. if shows errors then fix.
regards
Shiva -
Upgrading Solman from SP 17 to EHP1 errors with the Kernel install
I've been trying to upgrade solman to EHP1 but I get errors when I try to install Kernel 7.01. After I have copied the kernel to \SYS\exe\uc\NTAMD64 I can start SAP and for a while it works. Then SAP stops working and both services stop. I've tried to restart the services but I get and error telling me its the wrong product version and to re-install the software. Its a 64bit unicode kernel on windows 2003 64bit and I have the right kernel. Any ideas anyone?
HI
I am having the same issues. when upgrading via JSPM or manually, the sap services won't start and keep saying the version is incompatable, and suggested to reinstall.
Did you manage to get around it?
Regards
Kevin -
I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times. The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"! Help please!
Install appeared to run okay up to,, and including "shared Technologies"....Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
-
Error Upgrading Netweaver 7.02 to Netweaver 7.4
Hello SDN!
I'm curently upgrading a SAP Portal system running on Netweaver 7.02 to Netweaver 7.4 and have encountered the following error:
Sep 3, 2014 3:36:50 PM [Error ]: The following problem has occurred during step execution: com.sap.sdt.util.diag.DiagException: Could not delete old bootstrap libraries for
instance J02 on host removed_hostname using OSExecute of sapcontrol with the command /usr/sap//SID/exe/jvm/rs6000_64/sapjvm_6.1.068/sapjvm_6/bin/java -cp /usr/sap/SID/SYS/global/
sdtremote/sdt_trace.jar:/usr/sap/SID/SYS/global/sdtremote/sdt_util.jar:/usr/sap/SID/SYS/global/sdtremote/sdt_tools.jar:/usr/sap/SID/SYS/global/sdtremote/sap.com~tc~sec~csi.j
ar com.sap.sdt.tools.remote.SdtRemoteOperationsExecutor deleteBootstrapJars /usr/sap/SID/J02 SWITCH_UPGRADE. See /usr/sap/SID/SUM/sdt/log/SWITCH/DELETE-BOOTSTRAP-JARS_01.OUT
for details.
Unfortunately, the log file that is referenced in this error message is empty. We added an application server to this system after generating the XML stack for SUM, and the hostname that is referenced in the error is the application server, so I believe the problem has something to do with remotely executing this command on the app server.
Does anyone have any thoughts?
Thanks in advance!Hi Harri,
You need to follow the below steps :
1. Stop all the services of SAP.
2. Maintain service/webprotectedmethods = DEFAULT in all the profile of SAP (including the start profile , instance profile and default profile of J02,SCS,DVEBMGDS)
3. Try to delete the file manually.Also do share the /DELETE-BOOTSTRAP-JARS_01.OUT
Please do share the result.
With Regards
Ashutosh Chaturvedi -
I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?
You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme.
Maybe you are looking for
-
How to consume a web service provided by third party system from SAP system
Hi Friends, Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system? Do we get an URL to create a client proxy for consuming the web service? Thanx in advance, Ram
-
Hello 9iAS with Portal 9.0.2 in Sun Solaris I am working with Oracle Reports Builder and Oracle Portal. I've saved my reports with JSP extension. So, I've made some portlets with these reports into PEOPLE_APP db provider. Now, when I run my pages wit
-
Cannot find any information on property 'Name' in a bean of type 'UserBean'
Hello, I was trying to solve this problem myself but never got through, its really routine. So please can you see this error message, html file, jsp file and say if there are mistakes or if I need to add something else somewhere? Error org.apache.jas
-
I get these messages when I try to print a PDF The document could not be printed There were no pages selected Why is this happening?
-
Been having some pretty serious issues with the Messages app. Freezing/crashing. Messages sent from desktop not appearing on phone. Etc. Tried to close app and soft reset phone. Still no luck. Anyone else? :/ Thanks! iPhone 5s