Error upgrading Hyper-V Server 2008 R2 to 2012: 0x80070490

Hi everyone!
As it is release day for Hyper-V Server 2012, I decided to go ahead and upgrade from Hyper-V Server 2008 R2. However, I keep getting this error:
"Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your boot disk has at least 1198 megabytes (MB) of free space.
Error code 0x80070490"
I have over 20 gigs free on the boot volume, and tons more on my VHD volume, so I don't know why it's doing this. I have shut down all VMs, there are no snapshots, nothing cluttering up my C: drive, and yes I've rebooted it several times. I have
also tried copying the installation DVD to a local volume and installing that way, but I keep getting the same error. I know the quick solution would be to just format, reinstall clean, and pray that my VMs import into 2012 (which are already safely
on another volume), but there has to be a reason this is happening.
Any ideas? :) Thanks!

Hello Vincent,
I get the same error trying to upgrade my 2008R2 server to 2012. Here's my diskpart output for the partition (it's a mirrored partition):
DISKPART> detail volume
Disk ### Status Size Free Dyn Gpt
Disk 2 Online 298 GB 1024 KB *
Disk 1 Online 298 GB 1024 KB *
Read-only : No
Hidden : No
No Default Drive Letter: No
Shadow Copy : No
Offline : No
BitLocker Encrypted : No
Installable : Yes
Volume Capacity : 297 GB
Volume Free Space : 268 GB
Any suggestions?

Similar Messages

SQL Server reporting services error "URl has already been reserved" while doing upgrade from SQL server 2008 R2 to SQL server 2012

"URl has already been reserved".
Reporting services for port 80 and 443 works fine both for reports and reportingserver on SQL server 2008 R2. But when I try to upgrade from SQL server 2008 R2 to 2012 this error pops up. How to make sure before upgrading regarding reporting services that
URL reserves and SSL are fine or how to fix reporting services are upgrade like repair install.
Thanks

Hi yashmitl,
In your case, please running the following command to check the current URL reservations on http.sys.
netsh http show urlacl
Then, please delete the URL reservation by executing the following command try to resolve the issue.
netsh http delete urlacl <url>
There is a similar issue, you can refer to it.
http://social.technet.microsoft.com/Forums/en-US/d5204dd3-e26d-4592-8ef0-a94005fc46a5/the-url-has-already-been-reserved?forum=sqlreportingservices
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Windows 2008 Standard SP2 inplace upgrade to Windows Server 2008 R2 Standard SP1 failing

Hi All,
I'm encountering an issue with performing an in-place upgrade of Windows Server 2008 SP2 to Windows Server 2008 R2 SP1.
Server details:
Virtual machine running on VMware ESXi 5.
Uninstalled AV and backup software
Domain controller also running AD Certificate Services#
UAC disabled
Running setup as a domain admin
When launching setup, the process completes "Copying Windows Files". After a few seconds or being on "Gathering files, settings and programs 0%", an error appears on screen -
Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation.
Error code: 0xC0000005
Errors and information up to the fatal errors in the setupact.log setup summary:
2013-04-28 19:26:35, Info MIG Loading replacement manifest data for Microsoft-Windows-WMI-Core
2013-04-28 19:26:35, Info MIG Loading replacement manifest data for Microsoft-Windows-WSRM-Service
2013-04-28 19:26:35, Info [0x080841] MIG UPGCSIAgent: Enumerating installed manifest source using C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll
2013-04-28 19:26:35, Warning [0x080405] MIG EnablePrivilege: AdjustTokenPrivileges failed (Error:0x514)
2013-04-28 19:26:35, Info CSI 00000001@2013/4/28:18:26:35.866 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7feeff78c85 @0x7fef1646a4e @0x7fef1646676 @0x7fef1647a53 @0x7fef164c291
@0x7feedd728ba)
2013-04-28 19:26:35, FatalError [0x090001] PANTHR Exception (code 0xC0000005: ACCESS_VIOLATION) occurred at 0x000007FEF00498CF in C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll (+00000000001498CF).
Minidump attached (107516 bytes).
2013-04-28 19:26:36, FatalError [0x090001] PANTHR Exception (code 0xC0000005: ACCESS_VIOLATION) occurred at 0x000007FEF00498CF in C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll (+00000000001498CF).
Minidump attached (107788 bytes).
The diagerr.xml has the two minidumps but they are just encoded straight into the xml file. Thanks for any assistance. /Ashley

Hi,
Generally such kind of issues are caused by third party programs such as CD burning programs, device driver etc.
First please refer to this article to see if there is anything helpful:
Guide for Upgrading to Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ff972408(v=ws.10).aspx
Meanwhile from the description, it mentioned a file under C:\Windows\winsxs. Check the permission of the folder amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6 and the file wcp.dll to see if the permission
and ownership are correct compare with the other folders.
Also as it provided 2 minidump files, you will need to use WinDBG to read the minidump files and see if there is any further information.
http://support.microsoft.com/kb/315263
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

WPA2 EAP-PEAP error, may be Windows Server 2008 or...

I've studied posts like /t5/Connectivity/Not-able-to-connect-to-company-WLAN-WPA2-AES-PEAP-with-E71/m-p/420301/highlight/tru... , updated firmware, no joy. On E71, get
WLAN: EAP-PEAP authentication failed
In the event log of the domain controller+NPS server, get:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          5/19/2010 10:24:18 AM
Event ID:      6274
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: Actinium.s********.com
Description: Network Policy Server discarded the request for a user. Contact the Network Policy Server administrator for more information.
User:
     Security ID: S****\****
     Account Name: d***@*****.com
     Account Domain: S*******
     Fully Qualified Account Name: S******\*****
Client Machine:
     Security ID: NULL SID
     Account Name: -
     Fully Qualified Account Name: -
     OS-Version: -
     Called Station Identifier: 000B8651*****
     Calling Station Identifier: 0021FE3****
NAS:
     NAS IPv4 Address: 10.0.1.253
     NAS IPv6 Address: - NAS Identifier: 10.0.1.253
     NAS Port-Type: Wireless - IEEE 802.11
     NAS Port: 1
RADIUS Client:
     Client Friendly Name: OAW-4308
     Client IP Address: 10.0.1.253
Authentication Details:
     Connection Request Policy Name: Secure Wireless Connections
     Network Policy Name: Secure Wireless Connections
     Authentication Provider: Windows Authentication Server: Actinium.s********.com
     Authentication Type: EAP
     EAP Type: -
     Account Session Identifier: -
     Reason Code: 1
     Reason: An internal error occurred. Check the system event log for additional information.
I get a different "Reason" when I deliberately use the wrong certificate, so that part is probably OK. Tried many combinations of sAMAccountName, userPrincipalName, etc. in user and realm fields. I saw a perhaps related issue with somebody using a maemo device that stopped working when they upgraded to Windows Server 2008 on the back end. No problem with iPhones, Blackberry Storms, laptops.
Help...

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Upgrade to SQL Server 2008 R2 fails

I'm trying to upgrade from SQL Server 2008 Express to SQL Server 2008 R2 Enterprise. The installation is failing. I get two log files. The first appears to be a summary. The second is an MSI install log file. The MSI log is too large to paste in here and
I cannot attach files, so I included the section where it appears to fail. Based on the log contents below, how can I fix this?
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2068024447
Exit facility code:            1212
Exit error code:               29569
Exit message:                  Failed: see details below
Start time:                    2015-04-06 21:07:14
End time:                      2015-04-06 21:13:54
Requested action:              Upgrade
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150406_210629\sql_engine_core_inst_ctp6_Cpu64_1.log
Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name:                  DAD-PC
Machine processor count:       12
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Sql Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             Database Engine Services
1033                 Express Edition      10.3.5500.0     No
Sql Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             SQL Server Replication
1033                 Express Edition      10.3.5500.0     No
Sql Server 2008
Management Tools - Basic                 1033                 Express Edition
10.0.1600.22    No
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL Server 2008 R2
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         H:\x64\setup\
Installation edition:          ENTERPRISE
User Input Settings:
ACTION:                        Upgrade
AGTDOMAINGROUP:                <empty>
BROWSERSVCSTARTUPTYPE:         Disabled
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150406_210629\ConfigurationFile.ini
CUSOURCE:
ENU:                           True
ERRORREPORTING:                True
FAILOVERCLUSTERROLLOWNERSHIP: 2
FARMACCOUNT:                   <empty>
FARMADMINPORT:                 0
FARMPASSWORD:                  *****
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 *****
FTUPGRADEOPTION:               Import
HELP:                          False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS:              False
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
ISSVCPASSWORD:                 *****
ISSVCSTARTUPTYPE:              Automatic
PASSPHRASE:                    *****
PCUSOURCE:
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
RSCATALOGSERVERINSTANCENAME:   Unknown
RSUPGRADEDATABASEACCOUNT:
RSUPGRADEPASSWORD:             *****
SQLDOMAINGROUP:                <empty>
SQMREPORTING:                  False
UIMODE:                        Normal
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150406_210629\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Writer
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Browser
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Replication
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Compact Edition Tools
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Basic
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150406_210629\SystemConfigurationCheck_Report.htm
PARTIAL MSI LOG BELOW
Action start 21:13:47: AppSearch.
MSI (s) (40:00) [21:13:47:914]: Note: 1: 1325 2: v2.0.50727
MSI (s) (40:00) [21:13:47:914]: Note: 1: 1325 2: EventLogMessages.dll
MSI (s) (40:00) [21:13:47:914]: PROPERTY CHANGE: Adding ASPNET_EVENTLOGDLL property. Its value is 'C:\Windows\Microsoft.NET\Framework64\v2.0.50727\EventLogMessages.dll'.
MSI (s) (40:00) [21:13:47:915]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\\Setup 3: 2
MSI (s) (40:00) [21:13:47:915]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FBD367D1-642F-47CF-B79B-9BE48FB34007} 3: 2
MSI (s) (40:00) [21:13:47:915]: PROPERTY CHANGE: Adding INSTALLSQLSHAREDDIR_32 property. Its value is 'C:\Program Files (x86)\Microsoft SQL Server\'.
MSI (s) (40:00) [21:13:47:916]: PROPERTY CHANGE: Adding INSTALLSQLSHAREDDIR_64 property. Its value is 'C:\Program Files\Microsoft SQL Server\'.
MSI (s) (40:00) [21:13:47:916]: PROPERTY CHANGE: Adding DEVENV_IDE8 property. Its value is 'C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\'.
MSI (s) (40:00) [21:13:47:917]: PROPERTY CHANGE: Adding SQLSETUPARPWRAPPER property. Its value is 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Release\x64\SetupARP.exe'.
MSI (s) (40:00) [21:13:47:917]: Doing action: RestoreSetupParams_64
Action ended 21:13:47: AppSearch. Return value 1.
MSI (s) (40:00) [21:13:47:920]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'RestoreSetupParams_64'
MSI (s) (40:C0) [21:13:47:921]: Invoking remote custom action. DLL: C:\Windows\Installer\MSICCED.tmp, Entrypoint: RestoreSetupParams
Action start 21:13:47: RestoreSetupParams_64.
<Func Name='LaunchFunction'>
Function=RestoreSetupParams
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: RestoreSetupParams
PerfTime Start: RestoreSetupParams : Mon Apr 06 21:13:47 2015
<Func Name='RestoreSetupParams'>
        Error Code: 0x80077381 (29569)
Windows Error Text:   Source File Name: sqlca\sqlcax.cpp
Compiler Timestamp: Thu Jul 3 22:23:09 2008
     Function Name: RestoreSetupParams
Source Line Number: 190
Error Code: 29569
MSI (s) (40!D0) [21:13:51:016]: Product: Microsoft SQL Server 2008 Database Engine Services -- Error 29569. SQL Server Setup failed to restore the instance id.
Error 29569. SQL Server Setup failed to restore the instance id.
<Failure Type='Fatal' Error='29569'>
<EndFunc Name='LaunchFunction' Return='29569' GetLastError='203'>
CustomAction RestoreSetupParams_64 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)

Hello,
You shared with us the following lines part of one of the logs created during the upgrade process:
Error Code: 29569
MSI (s) (40!D0) [21:13:51:016]: Product: Microsoft SQL Server 2008 Database Engine Services -- Error
29569. SQL
Server Setup failed to restore the instance id.
These lines are associated with Registry corruption. If this instance is a production instance, please call Microsoft Support for help.
For more information, please read the answer provided by Cathy Miller (MSFT) on the following thread.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/15a67403-3e67-47cd-8595-4330945bd6cc/sql-server-2008-sp2-update-fails-error-29569-sql-server-setup-failed-to-restore-the-instance-id?forum=sqlsetupandupgrade
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Reports quit working after upgrade to SQL Server 2008

Folks,
I'm running Visual Studio 2008 (sp1) and recently upgraded to SQL Server 2008. Reports worked fine until after upgrade. Now I get the "Login Failed" error message.
Here is code snippets:
        CrystalDecisions.CrystalReports.Engine.ReportDocument oReport = new   CrystalDecisions.CrystalReports.Engine.ReportDocument();
        TableLogOnInfo LonOnInfo = new TableLogOnInfo();
        TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
        TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
        private Tables crTables;
        private Table crTable;
        ConnectionInfo crConnectionInfo = new ConnectionInfo();
            crConnectionInfo.IntegratedSecurity = true;
            crConnectionInfo.ServerName = Properties.Settings.Default.InstanceName + "
Instance";
            crConnectionInfo.DatabaseName = "DATABASE";
            crTables = oReport.Database.Tables;
            for (int i = 0; i < crTables.Count; i++)
                crTable = crTables<i>;
                crtableLogoninfo = crTable.LogOnInfo;
                crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                crTable.ApplyLogOnInfo(crtableLogoninfo);
            oReport.RecordSelectionFormula = xFormula;
            crystalReportViewer1.ReportSource = oReport;
Has anyone had this problem? Any help would be appreciated.
Terry

CR 2008 does not support MS SQL 2008 yet, meaning we have not had time to test it completely and add it to our supported platforms.txt file.
One thing I noticed is you are using trusted authenication:
crConnectionInfo.IntegratedSecurity = true;
Make sure you give access to all users, MS changed the security properties a lot since SQL 2005 and you can't simply log into any database now. If you have a DBA check with that person on how to configure NT Authentication or the Help file. You can also do a quick test and simply use MS SQL Server authentication to confirm if it's a user permission issue.
Try creating a report that doesn't use Integrated Security, check the box off on your data logon prompt in the Designer.

¿Is it possible to upgrade from SCCM 2012 a domain controller in Windows Server 2008 R2 TO 2012 R2?

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine

Hi Team,
Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine. I can confirm this machine has .Net
Feature enabled and with Latest version.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
Error 25541.Failed to open XML file C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG\machine.config, system error: -2147024786
Regards,
Muthukumar.S.P.

Hi,
Can you follow workaround mentioned in below msdn blog
http://blogs.msdn.com/b/astebner/archive/2007/11/01/5826719.aspx
As per the blog you have to open the msi log files which must be located at
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
In MSI log files search for the error mentioned in blog. Below link will help you read setup log files
http://msdn.microsoft.com/en-gb/library/ms143702%28v=sql.105%29.aspx
PS: Please read links carefully and patiently and if it does not solves issue please post summary.txt file and details.txt file on skydrive for analysis
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Do you recommend Server 2008 R2 to 2012 R2 inplace upgrade?

Hi
Do you recommend Server 2008 R2 to 2012 R2 in place upgrade for both DCs and member servers?
Thanks
Shane

Hi,
From the
MS support lifecycle, the mainstream support for Windows Server 2008 R2 would be end in 2015.
To upgrade to Windows server 2012 R2, please refer to the links below:
Upgrade Domain Controllers to Windows Server 2012 R2 and Windows Server 2012
Upgrade Options for Windows Server 2012 R2
Best regards,
Susie

Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same?

Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
CAL licensing method).
(whether you use per-Device, or per-User, is up to you, it comes down to cost).
CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
CALs can be tricky to correctly license.
Here's some introductory reading:
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
don't physically do anything with them to own/drive a car.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Blue Screen Error during starting Windows Server 2008 R2 (VM on Hyper-v WinSvr2012) Using a Physical to Virtual (P2V) VHDX.

Hi There,
I'm trying to migrate one of my physical Windows Server 2008 R2 to Virtual Environment (Hyper-V on WinSvr2012).
(The original physical machine had multiple partitions on the windows HDD and 2 other boot able OSs where installed on 2 of those partitions ...) So anyhow, After heaps of trouble shooting and fixing the boot records, it finally started booting the
Windows but when it got to loading C:\windows\System32\Drivers\Classpnp.sys
and it crashed, a blue screen poped up saying "A Problem has been detected and windows has shut down to prevent damage to your computer ... ) and then system got rebooted automatically.
I have tried chkdsk, also tried copying a new classpnp.sys to replace the old one but no hope. I don't think is not a damage file issue. Not sure, but it is probably related to changing the HDD devices or SCSI/IDE controllers?
Any idea?

1. You have placed your problem in wrong forum. Address your problem to Server forum instead.
2. I do not think it is liable configuration. I have not heard about migration of multiboot HDD. Try to split it. Pay attention to better preparation. I would expect separate target VM.
Regards
Milos

Move Virtual Machine from Hyper-V Server 2008 R2 SP1 to Hyper-V Server 2012 fails with Error 2901

I have six Hyper-V 2008 R2 SP1 servers and two Hyper-V 2012 servers. I am running SCVMM 2012 SP1. I am trying to use "move virtual machine" from within SCVMM to move VMs from a 2008 host to a 2012 host. I have tried different VMs on different hosts
and they all fail with this error:
==========
Error (2901)
The operation did not complete successfully because of a parameter or call sequence that is not valid.
The parameter is incorrect (0x80070057)
Recommended Action
Ensure that the parameters are valid, and then try the operation again.
==========
I have successfully created a VM on one of the 2012 hosts and moved it to the other 2012 hosts. I can move VMs from 2008 host to 2008 host. I just cannot move VMs from 2008 host to 2012 host.
Does SCVMM 2012 SP1 not support moving VMs from Hyper-V 2008 to Hyper-V 2012?

Hello Kevin,
Have you got an resolution yet ? Do you have latest update roll up pack applied to SCVMM 2012 SP1?
With SCVMM 2012 SP1 " Running VMs (Live Migartion) and VMs which are in Saved state or having checkpoints can not be migrated from 2008R2 host to 2012 Host "
above was fixed in SCVMM 2012 Update Roll up 1
Apart this please check the approx. size of data (VHDs) which will get transferred over the network , If you have large files chances are more to get such errors.
Thanks
~NY

Upgrading Hyper-V Server 2008R2 Cluster to 2012R2

I have a Hyper-V Server 2008R2 (free 'core' version) cluster that I would like to upgrade to Hyper-V Server 2012R2 (same 'core' version). I found
this document that seems to outline the process, however I have the following questions...
Any reason this process won't work on the "core" version of Hyper-V. i.e. "Microsoft Hyper-V Server 2008R2". I currently have a 2-node 2008R2 HA cluster with "core" servers and am looking to migrate that cluster
to the "core" version of 2012R2.
Is there no way to do this "in place", meaning without a dedicated target server? It seems like the process assumes you just have extra servers sitting around that can act as targets. I suppose I could shuffle VMs off one cluster node,
evict that node from my current cluster, rebuild it with 2012R2 core, add it to a new cluster as the only node and carry on with the process outlined here? Once all VMs are on the new "cluster" of one 2012R2 node, I would destroy the original
cluster, rebuild those machines with 2012R2 and add them as nodes to the new cluster?
Any reason the "Failover Cluster Manager" tool, version 6.1, I've been using to manage my 2008R2 environment won't work to do the migration? Or are there new 2012 tools I need to have installed on my workstation. Remember, since this
is the "core" version I can't manage anything from the server.
Thanks,
Todd

Here's an update on what happened...
The first VM that failed turned out had 1 snapshot, which I know is a no no, but I generally never snapshot servers so it didn't even occur to me to check. So that's why the migrated VM wouldn't boot. When I recreated the VM manually and pointed
to the VHD file it obviously didn't include the AVHD content so it booted the server into a 2 month old state. That led to the domain problems since the AD server account password had changed sometime in the last 2 months. I tried a bunch of fixes
but the only thing that finally worked was to remove the server from the domain and re-join. Of course, that then broke Citrix, but that's getting off-topic.
The second VM that failed was because for some reason a CSV that it relied on was not migrated over and I didn't notice that in that in the report. And then I couldn't find any way to bring that CSV in after the fact. I re-ran the pre-migration
and it still didn't show it. Of course this is my biggest volume at 800GB. So I then re-mapped one of my old cluster nodes back to the LUN (after removing the new node), brought up the lost CSV, copied the VHD file on it to external media, brought
the old cluster down again, the new one up and was going to blow away that LUN and create it as a new CSV on the new cluster. Of course, when I went to go create the CSV it showed my LUN available for storage and I just had to add it and all the data
was brought with it. So 2 hours of copying for nothing! I'm not at all sure what happened with this problem, but it seems either rebooting the old cluster node or the new one jarred things lose.
Just wanted to report back saying everything is going again. And also to vent about how poor and riddled with pitfalls this migration is. The snapshot issue is ridiculous, how hard would it be for the tool to check for that and then throw an
error in the migration report?
For anyone that needs to upgrade from 2008 to 2012, good luck!

OMServer.msi returns error 1603 when trying to upgrade first management server from Operations Manager 2012 SP1 to Operations Manager 2012 R2

Hi All, looking for some assistance with the following issue.
We are attempting to upgrade our Operations Manager 2012 SP1 environment to Operations Manager 2012 R2.
We have completed all the pre-upgrade tasks detailed here
http://technet.microsoft.com/en-us/library/dn249704.aspx
We are then following the guidance detailed here regarding upgrading distributed management groups
http://technet.microsoft.com/en-us/library/dn249721.aspx. The upgrade fails on the first management server with the following screen being displayed.
OMServer.log file is as follows.
=== Verbose logging started: 22/01/2014 10:21:27 Build type: SHIP UNICODE 5.00.9200.00 Calling process: C:\Users\scomaction\AppData\Local\SCOM\Setup\SetupChainerUI.exe ===
MSI (c) (78:34) [10:21:27:040]: Resetting cached policy values
MSI (c) (78:34) [10:21:27:040]: Machine policy value 'Debug' is 0
MSI (c) (78:34) [10:21:27:040]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (c) (78:34) [10:21:27:040]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (78:34) [10:21:27:040]: Grabbed execution mutex.
MSI (c) (78:34) [10:21:27:071]: Cloaking enabled.
MSI (c) (78:34) [10:21:27:071]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (78:34) [10:21:27:071]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:082]: Running installation inside multi-package transaction F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:30) [10:21:27:082]: Grabbed execution mutex.
MSI (s) (D4:A0) [10:21:27:086]: Resetting cached policy values
MSI (s) (D4:A0) [10:21:27:086]: Machine policy value 'Debug' is 0
MSI (s) (D4:A0) [10:21:27:086]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (s) (D4:A0) [10:21:27:175]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (D4:A0) [10:21:27:181]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:190]: SRSetRestorePoint skipped for this transaction.
MSI (s) (D4:A0) [10:21:27:192]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (D4:A0) [10:21:27:200]: File will have security applied from OpCode.
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi' against software restriction policy
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi has a digital signature
MSI (s) (D4:A0) [10:21:27:354]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (D4:A0) [10:21:27:354]: MSCOREE not loaded loading copy from system32
MSI (s) (D4:A0) [10:21:27:360]: End dialog not enabled
MSI (s) (D4:A0) [10:21:27:360]: Original package ==> F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:A0) [10:21:27:360]: Package we're running from ==> C:\Windows\Installer\4b8344.msi
MSI (s) (D4:A0) [10:21:27:371]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:378]: Machine policy value 'TransformsSecure' is 1
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisablePatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:380]: Transforms are not secure.
MSI (s) (D4:A0) [10:21:27:380]: Note: 1: 2205 2: 3: Control
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log'.
MSI (s) (D4:A0) [10:21:27:380]: Command Line: OM_INSTALLDIR=F:\Program Files\Microsoft System Center 2012 R2\Operations Manager SEND_CEIP_REPORTS=0 MU_SETTING=0 ROOT_MANAGEMENT_SERVER_PORT=5723 SC_DB_SERVER=SCOM-XXX-AG SCDATABASENAME=OperationsManager DW_DB_SERVER=SCOM-XXX-AG DWDATABASENAME=OperationsManagerDW REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Users\scomaction\AppData\Local\SCOM\Setup CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=4472
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{58EFE971-58C1-4DBD-A400-A7607A745475}'.
MSI (s) (D4:A0) [10:21:27:380]: Product Code passed to Engine.Initialize: ''
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table before transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table after transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product not registered: beginning first-time install
MSI (s) (D4:A0) [10:21:27:380]: Product {C92727BE-BD12-4140-96A6-276BA4F60AC1} is not managed.
MSI (s) (D4:A0) [10:21:27:380]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (D4:A0) [10:21:27:381]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (D4:A0) [10:21:27:381]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (D4:A0) [10:21:27:381]: Adding new sources is allowed.
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:381]: Package name extracted from package path: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:381]: Package to be registered: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:383]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableMsi' is 1
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (D4:A0) [10:21:27:383]: Running product '{C92727BE-BD12-4140-96A6-276BA4F60AC1}' with elevated privileges: Product is assigned.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding OM_INSTALLDIR property. Its value is 'F:\Program Files\Microsoft System Center 2012 R2\Operations Manager'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding ROOT_MANAGEMENT_SERVER_PORT property. Its value is '5723'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Modifying SC_DB_SERVER property. Its current value is 'OperationsManager'. Its new value: 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DW_DB_SERVER property. Its value is 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DWDATABASENAME property. Its value is 'OperationsManagerDW'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Setup'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '4472'.
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (D4:A0) [10:21:27:383]: RESTART MANAGER: Disabled by MSIRESTARTMANAGERCONTROL property; Windows Installer will use the built-in FilesInUse functionality.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: TRANSFORMS property is now:
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (D4:A0) [10:21:27:395]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming
MSI (s) (D4:A0) [10:21:27:396]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Favorites
MSI (s) (D4:A0) [10:21:27:398]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (D4:A0) [10:21:27:399]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Documents
MSI (s) (D4:A0) [10:21:27:401]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (D4:A0) [10:21:27:402]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (D4:A0) [10:21:27:404]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (D4:A0) [10:21:27:406]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Local
MSI (s) (D4:A0) [10:21:27:408]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Pictures
MSI (s) (D4:A0) [10:21:27:411]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:413]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:414]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:415]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:417]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (D4:A0) [10:21:27:420]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:421]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:423]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:424]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:426]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Desktop
MSI (s) (D4:A0) [10:21:27:427]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:428]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (D4:A0) [10:21:27:428]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (D4:A0) [10:21:27:433]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\4b8344.msi'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi'.
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: User policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 22/01/2014 10:21:27 ===
MSI (s) (D4:A0) [10:21:27:435]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:436]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (D4:A0) [10:21:27:438]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (D4:A0) [10:21:27:438]: Doing action: INSTALL
Action start 10:21:27: INSTALL.
MSI (s) (D4:A0) [10:21:27:444]: Running ExecuteSequence
MSI (s) (D4:A0) [10:21:27:444]: Doing action: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76
MSI (s) (D4:A0) [10:21:27:447]: PROPERTY CHANGE: Adding SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:448]: Doing action: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76
Action ended 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:450]: PROPERTY CHANGE: Adding System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:450]: Doing action: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6
Action ended 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:452]: PROPERTY CHANGE: Adding WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6.
MSI (s) (D4:A0) [10:21:27:453]: Doing action: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522
Action ended 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6. Return value 1.
MSI (s) (D4:A0) [10:21:27:455]: PROPERTY CHANGE: Adding System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522.
MSI (s) (D4:A0) [10:21:27:456]: Doing action: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522. Return value 1.
MSI (s) (D4:A0) [10:21:27:458]: PROPERTY CHANGE: Adding WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:458]: Doing action: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:461]: PROPERTY CHANGE: Adding SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:461]: Doing action: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:463]: PROPERTY CHANGE: Adding WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:463]: Doing action: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:466]: PROPERTY CHANGE: Adding System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:467]: Doing action: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8
Action ended 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:468]: PROPERTY CHANGE: Adding WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8.
MSI (s) (D4:A0) [10:21:27:469]: Doing action: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9
Action ended 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8. Return value 1.
MSI (s) (D4:A0) [10:21:27:471]: PROPERTY CHANGE: Adding WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
MSI (s) (D4:A0) [10:21:27:472]: Doing action: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE
Action ended 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9. Return value 1.
MSI (s) (D4:A0) [10:21:27:474]: PROPERTY CHANGE: Adding WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE.
MSI (s) (D4:A0) [10:21:27:475]: Doing action: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE. Return value 1.
MSI (s) (D4:A0) [10:21:27:477]: PROPERTY CHANGE: Adding ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\'.
Action start 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4:A0) [10:21:27:477]: Doing action: FindRelatedProducts
Action ended 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
Action start 10:21:27: FindRelatedProducts.
MSI (s) (D4:A0) [10:21:27:481]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT_AGENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _SearchOpsMgrShellPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Doing action: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: FindRelatedProducts. Return value 1.
MSI (s) (D4:08) [10:21:27:501]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI847C.tmp, Entrypoint: SetMonadFilePath
MSI (s) (D4:B0) [10:21:27:502]: Generating random cookie.
MSI (s) (D4:B0) [10:21:27:505]: Created Custom Action Server with PID 4964 (0x1364).
MSI (s) (D4:34) [10:21:27:527]: Running as a service.
MSI (s) (D4:34) [10:21:27:529]: Hello, I'm your 64bit Impersonated custom action server.
Action start 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4!DC) [10:21:27:638]: PROPERTY CHANGE: Modifying MONAD_SHELL_PATH property. Its current value is 'Error: Value Never Set. Check the CACore:SetMonadFilePath CA'. Its new value: 'C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe'.
GetRegistyStringValue: Registy key value found.. C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
MSI (s) (D4:A0) [10:21:27:640]: Doing action: _Set_CORECOMPONENTPRESENT
Action ended 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
MSI (s) (D4:A0) [10:21:27:643]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
Action start 10:21:27: _Set_CORECOMPONENTPRESENT.
MSI (s) (D4:A0) [10:21:27:644]: Skipping action: _AbortDowngradeProductAttempt (condition is false)
MSI (s) (D4:A0) [10:21:27:644]: Doing action: _AbortIncompatibleComponents
Action ended 10:21:27: _Set_CORECOMPONENTPRESENT. Return value 1.
Action start 10:21:27: _AbortIncompatibleComponents.
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5044 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1580 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5512 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 4268 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5024 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 6064 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 3396 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 2704 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5568 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5940 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1968 could not be cancelled. Error: 1168
MSI (s) (D4:A0) [10:21:27:652]: Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
Action ended 10:21:27: _AbortIncompatibleComponents. Return value 3.
Action ended 10:21:27: INSTALL. Return value 3.
Property(S): DiskPrompt = Please Insert Disk 1
Property(S): UpgradeCode = {17058653-A628-4C03-8F80-5E2B179ECD55}
Property(S): SCDATABASENAME = OperationsManager
Property(S): SC_DB_SERVER = SCOM-XXX-AG
Property(S): SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): CORECOMPONENTPRESENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): OM_INSTALLDIR = F:\Program Files\Microsoft System Center 2012 R2\Operations Manager
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): Privileged = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): DONOTSKIPDELETESERVICES = 0
Property(S): DONOTSKIPINSTALLSERVICES = 0
Property(S): OM_COMMON_PRODUCT_REGISTRY_PATH = SOFTWARE\Microsoft\System Center Operations Manager
Property(S): OM_COMMON_PRODUCT_RELEASE_REGISTRY_KEY = 12
Property(S): OM_COMMON_PRODUCT_DEFAULT_INSTALL_DIR = System Center Operations Manager
Property(S): NetFxVersion = v2.0.50727
Property(S): IS_OM_SERVER = 1
Property(S): InstallAPMAgent = 1
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): ARPNOREPAIR = 0
Property(S): ARPURLINFOABOUT = http://www.microsoft.com/mom
Property(S): ARPURLUPDATEINFO = http://www.microsoft.com/mom
Property(S): ARPHELPLINK = http://support.microsoft.com
Property(S): MSIRESTARTMANAGERCONTROL = Disable
Property(S): SQL_PORT = 1433
Property(S): DbSizeGood = 1
Property(S): DbFileOptionsGood = 1
Property(S): DbFilesSpaceGood = 1
Property(S): DbNameGood = 1
Property(S): SqlServicesStarted = 1
Property(S): _SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): DialogWizardTitle = System Center 2012 R2 Operations Manager Setup
Property(S): MinimumOSMsg = This product must be installed on Windows Server 2008 R2 or higher.
Property(S): MOMSDKPortDesc = Operations Manager SDK.
Property(S): MOMConnectorPortDesc = Operations Manager Connector Framework.
Property(S): MOMAEMPortDesc = Operations Manager Application Error Monitoring.
Property(S): MOMSQMPortDesc = Operations Manager Customer Experience Improvement Program.
Property(S): MOMHSPortDesc = System Center Management Health Service
Property(S): SCOMV3SP1ProgramName = System Center 2012 R2 Operations Manager
Property(S): FWRulePingRequestName = Operations Manager Ping Request (Echo Request - ICMPv4 OUT)
Property(S): FWRulePingRequestDesc = Operations Manager network monitoring ping request
Property(S): FWRulePingResponseName = Operations Manager Ping Response (Echo Response - ICMPv4 IN)
Property(S): FWRulePingResponseDesc = Operations Manager network monitoring ping response
Property(S): FWRuleSnmpRequestName = Operations Manager SNMP Request
Property(S): FWRuleSnmpRequestDesc = Operations Manager network monitoring SNMP request
Property(S): FWRuleSnmpResponseName = Operations Manager SNMP Response
Property(S): FWRuleSnmpResponseDesc = Operations Manager network monitoring SNMP response
Property(S): FWRuleSnmpTrapListenerName = Operations Manager SNMP Trap Listener
Property(S): FWRuleSnmpTrapListenerDesc = Operations Manager network monitoring SNMP trap listener
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductCode = {C92727BE-BD12-4140-96A6-276BA4F60AC1}
Property(S): ProductLanguage = 1033
Property(S): ProductName = System Center Operations Manager 2012 Server
Property(S): ProductVersion = 7.1.10226.0
Property(S): SecureCustomProperties = ACTIONSPASSWORD;CORECOMPONENTPRESENT_AGENT;CORECOMPONENTPRESENT_GW;CORECOMPONENTPRESENT_RC;CORECOMPONENTPRESENT_SCE;CORECOMPONENTPRESENT_SMB2;CORECOMPONENTPRESENT_SMRTM;IS_AVICODE_AGENT_INSTALLED;IS_MOMASPAGENT_INSTALLED;MOM_DB_SERVER;MOMDATABASENAME_OLD;OM_NEWER_PRODUCT_FOUND;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650;SQL_PORT
Property(S): MsiHiddenProperties = _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;_SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;ACTIONSPASSWORD;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650
Property(S): WixPdbPath = d:\btvsts\20867\private\product\setup\wix\msi\server\om\obj\amd64\OMServer.wixpdb
Property(S): CORECOMPONENTPRESENT_AGENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): MONAD_SHELL_PATH = C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Property(S): EnableEV.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = 1
Property(S): AddInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = add
Property(S): RemoveInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = remove
Property(S): WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE = C:\Windows\
Property(S): VersionNT = 602
Property(S): DW_DB_SERVER = SCOM-XXX-AG
Property(S): DWDATABASENAME = OperationsManagerDW
Property(S): OMDATABASENAME = OperationsManger
Property(S): MaximumDataAgeMinutes = 10080
Property(S): MaximumQueueSizeKB = 102400
Property(S): MOMSDKPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 5724
Property(S): MOMConnectorPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51905
Property(S): MOMAEMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51906
Property(S): MOMSQMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51907
Property(S): SDK_SERVICE_TYPE = 4
Property(S): ROOT_MANAGEMENT_SERVER_PORT = 5723
Property(S): SERVER_MANAGEMENT_GROUP_TYPE.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = 1
Property(S): MaximumForwardedVirtualQueuePercentage = 8
Property(S): QueueSendDataSinglePriority = 0
Property(S): ADMIN_ROLE_GROUP.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = Administrators
Property(S): USE_MANUALLY_SPECIFIED_SETTINGS = 1
Property(S): WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 = C:\Windows\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): CAN_REGISTER_FOR_MU = 0
Property(S): MU_SETTING = 0
Property(S): IS_ROOT_HEALTH_SERVICE = 0
Property(S): IS_MOM_SERVER = 0
Property(S): IS_MOM_GATEWAY = 0
Property(S): WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 = C:\Windows\
Property(S): WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\
Property(S): System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\system32\
Property(S): DirectoryTable100_amd64.1C11561A_11CB_36A7_8A47_D7A042055FA7 = DirectoryTable
Property(S): WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\
Property(S): SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\SysWOW64\
Property(S): DirectoryTable100_x86.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = DirectoryTable
Property(S): SEND_CEIP_REPORTS = 0
Property(S): System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 = C:\Windows\system32\
Property(S): ACS_AGENT_ACCOUNT.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 =
Property(S): WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 = C:\Windows\
Property(S): SC_COMMON_REGISTRY_PATH = SOFTWARE\Microsoft\System Center\2010\Common
Property(S): DISCOVERY_DATA_AUTHORIZATION_ENABLED = 0
Property(S): IcmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): IcmpRequestType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 8:*
Property(S): IcmpResponseType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0:*
Property(S): SnmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 17
Property(S): SnmpPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 161
Property(S): SnmpTrapPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 162
Property(S): DirectionIn.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0
Property(S): DirectionOut.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\SysWOW64\
Property(S): System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\system32\
Property(S): ADVISOR_UPLOADFREQUENCY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_UPLOADDAY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEHOUR_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEMIN_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_MAXCACHESIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_MAXMAILBOXSIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_ARCHIVEPERIOD_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #5
Property(S): ADVISOR_LOGLEVEL_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #3
Property(S): ADVISOR_NEEDMPINITIALIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_LYNC_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): ADVISOR_SHAREPOINT_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): MsiLogFileLocation = C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log
Property(S): PackageCode = {58EFE971-58C1-4DBD-A400-A7607A745475}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): REBOOT = ReallySuppress
Property(S): CURRENTDIRECTORY = C:\Users\scomaction\AppData\Local\SCOM\Setup
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 4472
Property(S): MsiSystemRebootPending = 1
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 602
Property(S): WindowsBuild = 9200
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\SCOMAC~1\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): AppDataFolder = C:\Users\scomaction\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\scomaction\Favorites\
Property(S): NetHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\scomaction\Documents\
Property(S): PrintHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\scomaction\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\scomaction\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8192
Property(S): VirtualMemory = 7854
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = scomaction
Property(S): UserSID = S-1-5-21-607126847-70518424-489426498-210484
Property(S): UserLanguageID = 2057
Property(S): ComputerName = SCOMMS1-VM
Property(S): SystemLanguageID = 2057
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 10:21:27
Property(S): Date = 22/01/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.17929
Property(S): MsiWin32AssemblySupport = 6.2.9200.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): USERNAME = Windows User
Property(S): DATABASE = C:\Windows\Installer\4b8344.msi
Property(S): OriginalDatabase = F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
MSI (s) (D4:A0) [10:21:27:697]: Note: 1: 1708
MSI (s) (D4:A0) [10:21:27:698]: Product: System Center Operations Manager 2012 Server -- Installation operation failed.
MSI (s) (D4:A0) [10:21:27:698]: Windows Installer installed the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.1.10226.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (D4:A0) [10:21:27:744]: Deferring clean up of packages/files, if any exist
MSI (s) (D4:A0) [10:21:27:744]: MainEngineThread is returning 1603
MSI (s) (D4:30) [10:21:27:744]: No System Restore sequence number for this installation.
=== Logging stopped: 22/01/2014 10:21:27 ===
MSI (s) (D4:30) [10:21:27:746]: User policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D4:30) [10:21:27:747]: Destroying RemoteAPI object.
MSI (s) (D4:B0) [10:21:27:747]: Custom Action Manager thread ending.
MSI (c) (78:34) [10:21:27:748]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (78:34) [10:21:27:749]: MainEngineThread is returning 1603
=== Verbose logging stopped: 22/01/2014 10:21:27 ===
Any assistance anyone can provide will be greatly appreciated.

Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Post upgrade from Windows Server 2008 R2 SP1 to Windows Server 2012 R2

Hi, I'm not sure if I've done something wrong or if i lack some steps.
We have an existing server having Windows Server 2008 R2 SP1 as OS, DC, and DNS. I had to upgrade it based on global standards so I upgraded it into Windows Server 2012 R2.
What I did was an online upgrade, insert the DVD installation disc and it asked for a adprep for forest and domain.
I did both forest and domain adprep and installation continued. After reboot, it showed up errors on my local server. Please see image below:
and when i clicked each roles under Manageability, it shows me
Is there something I need to do to fix these red marks?
Regards,
Jeff

These are the logs i've seen inside Custom Views>Server Roles>AD DS, DNS Server, and Administrative Events respectively.
Regards,
Jeff

Error upgrading Hyper-V Server 2008 R2 to 2012: 0x80070490

Similar Messages

Maybe you are looking for