Error Upgrading ICM from 7.2.4 to 8.5.2 on Windows 2008 R2

Hi,
I am trying to upgrade from ICM 7.2.4 to ICM 8.5.2 on Windows 2008 R2 in lab. I am using the following procedure.
Old system
Domain controller Windows 2003
Sprawler Windows 2003 ( Icm 7.2.4)
New System
Domain Controller Windows 2008 R2 Standard Edition
Sprawler Windows 2008 R2 Standard Edition (SQL 2005 with SP4)
Taking the registry backup of the old system using registry utility.
Running the EDMT tool on the new 2008 Sprawler machine for technology refresh.
Running the ICM installer for Technology Refresh and selecting the registry and ICM patch (8.5.2)
System finishes the setup without any error and after reboot tries to install the patch.
At this point I get the attached error.
Has anyone faced such error while upgrading.
Regards,
Amir

Hi Amir,
As per the attached screenshot, it prompts out that your system has not went through the MR of 8.0. I suspect that you cannot upgrade your version from 7.2.4 directly to 8.5. Instead you would need to upgrade yur current version to 8.0 and from 8.0 you can upgrade to 8.5
Hope this helps!!!
Cheers,
Dass
Please rate useful posts

Similar Messages

Adobe errors: upgrade sw from 5.5 to 6 + install 6 on new iMac - serial number 'errors'

Hello- I had 5,5 Design Stardard. I upgraded to 6. Design Standard last year.
I tried to update my MacPro laptop and I encounter errors with my serial number. I did change the HD name on the Laptop.
I also just got a new iMac and I moved the 6.0 version over to it - no go. HELP FAST! please.... Adobe support s**ks
Thank you
B

did you deactivate whatever you want to install no that was installed on your previous hd?
if not, you'll probably need an activation count reset, http://www.adobe.com/support/chat/ivrchat.html
next, is your design standard cs6 license an upgrade? if yes and you do not have design standard cs5.5 installed on your new hd/imac, you'll need to supply both (cs5.5 and cs6) serial numbers when installing the cs6 upgrade. you'll need to give the correct number at the correct time.

HTTP-500 Error Reading Data from Client!!

I'm trying to create a page where by clients are able to contact us through the portal. So, it's a pretty basic form where I have a text box for the subject, and a text area for the message body.
My problem is when the message body is over a certain size, I'm getting a "portlet cannot be contacted" on my screen. The Apache log comes up with the error:
[error] mod_plsql: /pls/portal/!PORTAL.wwpob_page.show HTTP-500 Error Reading Data from Client!!
I'm not using a windows OS, so the bug that has been talked about previously talked about shouldn't be the problem.
Also, I am using a POST rather than a GET, so I don't think it has to do with the browser (and I have tested this on Firefox and IE 5.5 and IE 6).
Would appreciate any advise.
Thanks, Nicky

Are you using SSL? Maybe, it has to do with it. I encountered a similar problem. It turned up that this read error occurred inside Apache and was caused by a nonstandard-SSL-request by Internet Explorer. te remedy was to add this to the Apache configuration:
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
It tells Apache to switch to HTTP/1.0 and to never keep open socket connections with MSIE on SSL connections.
Lycka till!

Disk read error while awakening from hibernation

T42 with Hitachi travelstar, Xp sp2. It takes a long time going into hibernation and then gives an disk read error when reatsrt from hibernation. It can then only restart the windows losing the previous working programs.
This looks like a disk problem but the laptop works just fine other than that. Is it a problem with large files?
Thanks in advance.

It sounds as though your hard drive has failed or is failing. If you can't get past the error and you want to try and recover the data and files that are recoverable, you'll need a boot CD such as BartPE or Knoppix that will allow you to access your hard drive and copy files before you try the recovery. Another option would be to go ahead and purchase a replacement hard drive and an external USB enclosure. Put the new drive in your system and recover it using the Toshiba disks and then put the old drive in the enclosure and plug it in to a USB port. At that point, you can copy everything that is recoverable from the old drive to the new one. For the new drive, you will need an ATA-5 compatible drive that is jumper selectable as 'Master'. A cable select only drive will not work. You could go to 120GB with no concern about compatibility and you could probably go up to 250GB but I'm not sure whether that system has 28-bit or 48-bit LBA. If it's 28-bit your limit is 137GB. I see 160 and 250GB drives advertised for the A25 series so I suspect you have 48-bit LBA. In any case you should be able to find a 120GB drive for around $60.

Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008

Hi All,
I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
Based on the previous experience in upgrade I have planned in the following ways.
Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
Note: I am not using SQL 2008 - Project decision.
The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
Thanks and Regards
Vijay Kumar

Hi Jitendra,
Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
Hi Abhi and Others,
Thanks for all your support.
I have successfully completed the project for my landscape and it was a great success too.
As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
Thanks for everyone and I am closing the thread
Regards
Vijay

Upgrade window 2003 to Window 2008 R2 approach (Moss 2007)

I have moss 2007 running window 2003 32 bit (1wfe and 1sql server). There quite a few customization that i dont know about. I need to move it to Window 2008 R2 or higher. Anyone have done this? I need a good approach with less risk and impact. I'll build
a new server in window 2008 R2 so it is not an in-place upgrade. I have Moss 2007 SP2, that will work on Window 2008 R2?

- make sure any/all customizations support 64-bit (for SP2007, this is especially true for iFilters, though occasionally WSP's as well)
- install 64-bit onto new server
- add to existing farm -Do you mean adding this using config wizzard?
- move all services from old server to new server - Do this in central admin? Can i just turn on on new server and leave it still on on the old server?
- redirect DNS
- disconnect old server from farm - Do you mean adding
this using config wizzard?
- disconnect old server from domain
- turn off old server
- celebrate

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

R12 Upgrade Report from 11i Getting Error

Hi everyone,
We are currently working an R12 upgrade project from 11.5.10 to 12.1.3. I am currently converting a report from 11i to R12 but it is erroring out when I run it in R12. Below is the log. Any help would be greatly appreciated. Thanks.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXHH_APXNACHA_CHASE module: XXHH: NACHA Payment Format Chase (HHG)
Current system time is 06-DEC-2011 15:52:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='JRG120111b'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 6 15:52:04 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3660174.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 06-DEC-2011 15:52:06
---------------------------------------------------------------------------

It looks as though its failing in your beforereport trigger.
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.I dont believe payment batches are used anymore as they need to be done via Payment profiles and therefore you will need to use Payment Instruction ids instead. Also the setup at R12 is Mosaic
try including this. as the first statement in the Beforereport trigger. All the banks tables payment tables has changed so unless you have changed these to you will need to adjust these correctly to the R12 tables.
BEGIN
MO_GLOBAL.INIT ('SQLAP');
MO_GLOBAL.SET_POLICY_CONTEXT('S',FND_PROFILE.VALUE('ORG_ID'));
END;

Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same eror message

Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same error message. Says Lightroom will attempt to fix the problem the next time it launches but that is not happening. How do it fix this?

Delete the preview cache using your operating system. It is a folder whose name ends with Previews.LRDATA. Do not delete the Lightroom catalog, which ends with .LRCAT

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Error while upgrading Portal from 10.1.2 to 10.1.4

This is the error message I am getting when I try to upgrade portal from 10.1.2 to 10.1.4 by applying the patch.
NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID.
Please let me know if any has has a solution?
==========================================
D:\Software\Oracle\IDM\as_windows_x86_portal_1014\mrua_051020\mrua>mrua.bat -ora
cle_home D:\Software_Installations\OraHome_Infra_01 -oid_host <hostname> -oid_ssl_port 636
Executing mrua.pl
Running on Windows
OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
Enter the password for SYS:
Enter the password for cn=orcladmin:
Enter the password for cn=orcladmin:
Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
Calling upgrade plugin for MRUA
Component has already been upgraded MRUA
Calling upgrade plugin for PORTAL
Error: Component upgrade failed PORTAL
Error: PORTAL component version is: 10.1.2.0.2 INVALID
Calling upgrade plugin for MRC
Component has already been upgraded MRC
FAILURE: Some OracleAS plug-ins report failure during upgrade.
Log file: D:\Software_Installations\OraHome_Infra_01\upgrade\logs\mrua2007-07-1
3_02-07-15PM.log
Finished mrua.pl

That didn't help for me....
I have those things shut down already and you can see below what I'm getting on the re-run:
-bash-3.00$ /app/oracleas/as1012portal/bin/emctl stop iasconsole
Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://asdev:1811/emd/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Application Server Control ...
Cannot determine Oracle Enterprise Manager 10g Application Server Control process; /app/oracleas/as1012portal/bin/emctl.pid does not exist.
Oracle Enterprise Manager 10g Application Server Control may not be running.
-bash-3.00$ /app/oracleas/as1012portal/opmn/bin/opmnctl stopall
opmnctl: opmn is not running
-bash-3.00$ mrua/mrua.sh -oracle_home /app/oracleas/as1014metadatarepository -oid_host asdev -oid_ssl_port 636
Executing mrua.pl
Running on UNIX
OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
Enter the password for SYS:
Enter the password for cn=orcladmin:
Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
Calling upgrade plugin for MRUA
Component has already been upgraded MRUA
Calling upgrade plugin for PORTAL
Error: Component upgrade failed PORTAL
Error: PORTAL component version is: 10.1.2.0.2 INVALID
Calling upgrade plugin for MRC
Component has already been upgraded MRC
FAILURE: Some OracleAS plug-ins report failure during upgrade.
Log file: /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
Finished mrua.pl
-bash-3.00$ grep PORTAL /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
2007/10/23 12:43:06.236 CST NOTIFICATION:1 Framework: Calling upgrade plugin for PORTAL
2007/10/23 12:43:28.203 CST NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
2007/10/23 12:43:28.209 CST NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID
There is another oracle instance we have, the one that is hosting the LDAP server, and after the above I also tried doing a stopall there, then bringing up only the ldap server which is required for the upgrade, and then shutting down the iasconsole for that instance too so that only the ldap server remained, then re-running the portal upgrade. It didn't help.
Any ideas?

Getting error while upgrading OIM from 9101 to 9102

I am trying to upgrade OIM from 9101 to 9102 but getting following error.
bash-3.00$ sh ./LoadXLIF.sh jdbc:oracle:thin:@DB_HOST_IP:SID <Database User Name> <Database Password> AUDITCOMPLIANCE
/opt/oracle/oim/jdk_1.5.0_06/bin/java -cp /:/lib/xlUtils.jar com.thortech.xl.util.LoadXLIF Oracle oracle.jdbc.driver.OracleDriver jdbc:oracle:thin:@DB_HOST_IP:SID <Database User Name> <Database Password> xliff/XLIFsequence.properties xliff AUDITCOMPLIANCE
Exception in thread "main" java.lang.NoClassDefFoundError: com/thortech/xl/util/LoadXLIF
I confirmed that /xellerate/lib/xlUtils.jar has com/thortech/xl/util/LoadXLIF.class
Thanks.
Vinay

Hi, please update the reason and how you were able to resolve the issue. So that it will help other users too.

An error prevents the Change Management Upgrade script from executing

I have Warehouse Builder 10g on a database 10g R1.
On a server linux I have the repository, and on other server (Sun 5.9) I have runtimes for production.
I want execute an upgrade deploy action on one object but I get this error:
An error prevents the Change Management Upgrade script from executing successfully. We strongly advise that this Upgrade is UNDONE and the problem is investigated. Data loss may occur if you accept this Upgrade
Any idea?
Thanks,
Fernando.

I review the installation, it was made with a diferent user that database, I get same permission, restart runtimes service and problem was resolved.
Fernando.

Error upgrading company db from patch45 to 47

Hello, Im having an error upgrading my company database to patch 47 from patch 45. while on the upgrade screen, I can see on the status bar that the upgrade process cannot find a "Department" object
Ive done upgrades before with no problem, but this time I had to run it twice because the first time an error showed up that it couldnt upgrade the b1_share folder.
Here is the log file.
UPG_DoObjectUpgradeInt 2, error in object index=124, object name=Departments, object ID=119
STACK:
Frame id=00: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02AD2460
Frame id=01: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A1606
Frame id=02: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A0322
Frame id=03: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A029D
Frame id=04: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x0289E2F4
Frame id=05: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02273CCA
Frame id=06: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x029146C1
Frame id=07: "C:\WINDOWS\system32\kernel32.dll"; base=0x7C800000, offset=0x7C80B50B
C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=3220 TID=256
28/03/2009 13:10:19:443910 Upgrade NoteLogAlways FromVersion=800180 ToVersion=800181 Ending the company upgrade C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=3220 TID=1640

Thank you for reply, I found out the reason, there was a record missing in the departments table (record num -2).... i dont know why... we added the record and then the upgrade proceeded as expected.
Thank you.

MaxDB 7.8 error upgrading from EHP4 to EHP5

I'm upgrading ECC600 from EHP4 to EHP5 (ramp-up release) in a Maxdb 7.8 and Linux Suse 11 environment.
The source release have an 7.01 kernel.
With sapehpi, in the phase PREP_INTEGRATION/TABSPC_PREP, I have an error in GDBSSHD.LOG file:
TPERR- error in dbdd_get_size: 2
TPERR- msg: POS(60) Unknown column name:OWNER
Accordingly with notes 1142632 and 1447663, I installed the new 7.01 kernel (version 117) without changes.
I copied also the new dbsdbslib.so file in the installation directory, but there are no changes.
Any suggestion?
Thanks

Unfortunatelly, after the correction, I try to restart the SAPehpi and in the PREP_INTEGRATION/TABSPC_PREP phase I had another similar error; in the TABSPCP.LOG file there are this message:
4EETQ399 Execution of 'tp getdbobjsize' failed, rc=1
In the file TP.ECO the error is:
TRACE-INFO: 1: [dev trc     ,00000] Thu Apr 14 09:59:00 2011                                                         1789 0.001789
TRACE-INFO: 2: [dlux.c      ,00000] *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/sapdb/DVDEHP5/EHPI/abap/exe/dbsdbslib.so") FAILED
TRACE-INFO: 3:                          "/sapdb/DVDEHP5/EHPI/abap/exe/dbsdbslib.so: cannot open shared object file: No such file or directory"
TRACE-INFO: 4:                                                                                34 0.001823
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
tp finished with return code: 249
meaning:
connect failed due to DbSL load lib failure
I try the R3trans -d command but in the trans.log file there is the message:
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/IBS/SYS/exe/run/dbsdbslib.so' ...           118 0.000702
4 ETW000 [dlux.c      ,00000] *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/IBS/SYS/exe/run/dbsdbslib.so") FAILED
4 ETW000                          "/usr/sap/IBS/SYS/exe/run/dbsdbslib.so: cannot open shared object file: No such file or directory"
4 ETW000                                                                                272 0.000974
4 ETW000 [dbcon.c     ,00000] *** ERROR => Couldn't load library '/usr/sap/IBS/SYS/exe/run/dbsdbslib.so'
of course the file exists and I copied the same that are in exe and exenew directory.
Any suggestions?

Error Upgrading ICM from 7.2.4 to 8.5.2 on Windows 2008 R2

Similar Messages

Maybe you are looking for