Error upgrading idriver.exe

Hi, On Jan 11, 2006 I downloaded & installed the latest version. On install I got the following error:
"Install Driver Module"
app. name idriver.exe
mod ver 5.122602726
mod name ole32.2ll
How can this be fixed? What does this affect?
Does iTunes have a repair procedure? Is there a repair from add/remove programs?
Also at this time I do not have an Ipod - so in services I've stopped & disabled IPOD. via right click my computer>management>services.
Also previous upgrade had similar error.
Also Can/should iTunes be installed from safe mode or safe mode with network (allows internet?
Thanks
rico

R_,
Thank you for your kind advice, however, I've also been to the iPod support pages (and have done everything that is recommended, all to no avail) and I beg to differ with you.
iTunes _does not_ install properly----before I even get a chance to connect the iPod, I get the iTunes install error----it won't install the iTuneshelper.exe file.
I have done everything that is listed on both the iTunes support site, and the iPod support site, and I completely, and multiple times, purged my system of all Apple related software, and reinstalled iTunes, and no matter what I do, I get the error message that iTuneshelper.exe did not install, and when I connect the iPod, I get the error message that I need to re-install iTunes.
If I install the Ipod updater before iTunes, I have no problems, until I try to install iTunes, and then the same errror message (iTuneshelper.exe) comes up [it comes up as iTuneshelper.ex.exe failed to install].
I'm wondering if anyone has successfully installed the Nano with iTunes v6 on a Windows2000 machine?
Two kids each with a new iPod Nano, are not happy this Xmas!

Similar Messages

ITunes 6.0 - IDriver.exe - Application Error

I installed iTunes 6.0 on 3 Windows XP SP 2 computers today. All upgrading from iTunes 5.0
On 2 of the computers I got error messages pasted below during the QuickTime part of the installation. I dismissed the errors and the installation "completed successfully".
I've used iTunes 6.0 and opened Quicktime and everything seems fine so far. So I'm not asking for help with a problem, just noting this issue in case anyone else has observed it.
I am aware that IDriver.exe is part of the InstallShield routine. A quick check and I couldn't find anything about this error.
Madam
Event Type:     Information
Event Source:     Application Popup
Event Category:     None
Event ID:     26
Date:          13/10/2005
Time:          5:24:40 PM
User:          N/A
Computer:     COMPUTER
Description:
Application popup: IDriver.exe - Application Error : The instruction at "0x77511029" referenced memory at "0x0000005c". The memory could not be "read".
Event Type:     Information
Event Source:     Application Popup
Event Category:     None
Event ID:     26
Date:          13/10/2005
Time:          5:25:11 PM
User:          N/A
Computer:     COMPUTER
Description:
Application popup: IDriver.exe - Application Error : The instruction at "0x7c92ae22" referenced memory at "0x00000000". The memory could not be "read".

hi Madam!
hmmm. i couldn't turn up anything specific at event ID:
http://www.eventid.net/display.asp?eventid=26&eventno=2271&source=Application%20 Popup&phase=1
(i'm not a subscriber, so i can't follow up their "M" links ... not that there was anything specific to the IDriver.exe anyway.)
hmmmm. if you
b do
start running into problems, and you've got the time, it may be worth getting an install log to the moderators:
Gayle B, "If you are experiencing installation issues...", 06:20pm Oct 12, 2005 CDT
still at the early stage of troubleshooting these, i'm afraid, so i can't give you much more feedback than this. maybe keep checking in every day or so to check on any developments?
love, b

When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?

Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

Idriver.exe -application error apprears when instaling itunes 6

ok i try to install itunes 6 and when it meant to bring up the installshield wizard it will apprear in the taskbar but nothing is actually there. a while after it the following message appears
Idriver.exe application error blah blah blah the memory could not be "read"
plez help

hi Madam!
hmmm. i couldn't turn up anything specific at event ID:
http://www.eventid.net/display.asp?eventid=26&eventno=2271&source=Application%20 Popup&phase=1
(i'm not a subscriber, so i can't follow up their "M" links ... not that there was anything specific to the IDriver.exe anyway.)
hmmmm. if you
b do
start running into problems, and you've got the time, it may be worth getting an install log to the moderators:
Gayle B, "If you are experiencing installation issues...", 06:20pm Oct 12, 2005 CDT
still at the early stage of troubleshooting these, i'm afraid, so i can't give you much more feedback than this. maybe keep checking in every day or so to check on any developments?
love, b

Error message "clc.exe has stopped working".

When I start Photoshop I get an error message "clc.exe has stopped working". I have the latest version drivers for my Acer X23H and HP 2311 LCD monitors so upgrading them is not possible. Is there any other fix I can try?

I've just downloaded and installed the very latest drivers from AMD and installed them. Still, I get the "clc.exe has stopped working" errors when I launch PS. I do not get this, or any other errors, when opening or running any other programs, and have never once gotten a blue screen or had any failures in this system for the two or three years it's been running.
While it's remotely possible that there is some error in AMD's latest (and previous) drivers for this video card, what seems to fit the symptoms I have, is that there is some problem in Adobe's code.
Previous versions of Photoshop open and run fine on this system. Other CAD and graphics programs run fine, too, with no crashes, lockups, or failures.
Still, if there's something else that needs to be updated for my video system, to make the Adobe errors go away, I'm open to do whatever updates are necessary. I'm running an AMD Radeon HD 5700 series display adapter, driver date 11/20/2014, version 14.501.1003.0. Device manager says the device is working properly (for whatever that's worth).
The computer is running Win 7 64 bit ultimate. Processor is AMD Phenom II X6 1090T six-core processor. All has been running flawlessly for several years, and continues to do so with every application except Adobe Photoshop 14.501.1003.0.

Error upgrading company db from patch45 to 47

Hello, Im having an error upgrading my company database to patch 47 from patch 45. while on the upgrade screen, I can see on the status bar that the upgrade process cannot find a "Department" object
Ive done upgrades before with no problem, but this time I had to run it twice because the first time an error showed up that it couldnt upgrade the b1_share folder.
Here is the log file.
UPG_DoObjectUpgradeInt 2, error in object index=124, object name=Departments, object ID=119
STACK:
Frame id=00: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02AD2460
Frame id=01: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A1606
Frame id=02: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A0322
Frame id=03: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A029D
Frame id=04: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x0289E2F4
Frame id=05: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02273CCA
Frame id=06: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x029146C1
Frame id=07: "C:\WINDOWS\system32\kernel32.dll"; base=0x7C800000, offset=0x7C80B50B
C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=3220 TID=256
28/03/2009 13:10:19:443910 Upgrade NoteLogAlways FromVersion=800180 ToVersion=800181 Ending the company upgrade C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=3220 TID=1640

Thank you for reply, I found out the reason, there was a record missing in the departments table (record num -2).... i dont know why... we added the record and then the upgrade proceeded as expected.
Thank you.

Error message "javaw.exe has encountered..."

For a past few days I've been having this problems....
Whenever I use " Your Freedom" and "Azerues" program...I will get this standard Windows error message "javaw.exe has encountered a problem and need to close. Sorry for the incovinience" after running the program for about 5 minutes. Then, the program (Your Freedom) shuts down...
I dont know what causes the problem since I've been using Your Freedom for 1 week now and it's been working fine till yesterday...
For your information, I'm using:
java version: "1.5.0_06"
java (TM) Runtime Environment, Standard Edition (build 1.5.0_06-b05) java HotSpot (TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
Antivirus prog: Norton Antivirus 2005
Please help me because I really need to use the program

I have just recently upgraded my computer to windows xp and downloaded all of the applicable java software and get the same error message that you do. I tried your suggestion,but to no avail. Have you heard of any other potential causes for this error. I thought maybe it was a firewall issue, but I contacted the manufacturer of the program and there should not be an compatability problems. I can 't seem to find any info regarding that error message. Any advice would be appreciated.
Thanks

IDriver.exe, the instruction at 0x77511029 referenced memory at 0x000005c,

iDriver.exe, the instruction at 0x77511029 referenced memory at 0x000005c, the memory could not be "read".
I got this again when I installed 6.0.2. I had seen this before, last October with some other version.
iTunes seems to be working OK, despite the message.
It seems to be a known problem at Macrovision regarding InstallShield developer 8.0, with a known workaround.
http://support.installshield.com/kb/view.asp?articleid=Q107216

hi Gary!
just checking. if you click "OK" on that error dialog, will the installation go through anyway? i've seen a few reports of people being able to get away with that when they get a reference to IDriver.exe showing up (view all):
Peter DeSimone, "iTunes 6.0 - IDriver.exe - Application Error" #9, 08:57pm Oct 22, 2005 CDT
... we still don't really know what is causing this ...
love, b

Error Message Download.exe file linked to .....

Receiving error message "Download.exe flile linked to missing
export Kernel32.DLL:VerifyVersionInfoA.
Any tips on how to correct so I can continue download
process? Many thanks for any help.

m getting same message trying to upgrade to 9, and now I
cannot see any Java windows at all
PLEASE help

In SM21 - Database error 235 at EXE

Hello Gurus,
In sm21 - Database error 235 at EXE this error shown in our test server, while investigating I found this
( I am attaching log for your reference )
Details
Recording at local and central time........................ 25.03.2009 23:02:24
Task................ 15116 / Background Processor No. 18
User................ CSCADMIN_BC
Client.............. 050
Terminal............
Session............. 1
Transaction code....
Program name........ RSORAHST
Problem class....... K    SAP Web AS Problem
Development class... SBAC
Module name......... dbds
Line................ 798
Table name.......... 235
Field name.......... EXE
Documentation for system log message BY 2 :
After the attempt to call a database operation, the database system has
returned the error code specified in the message, which indicates that
the operation concerned could not be executed successfully.
Technical details
File................ 018863
Position............ 0000235620
Entry type.......... h      ( Database Error (Non-SQL)       )
Message ID.......... BY 2
Variable parts...... 235       EXE                                       dbds    798
The given program associated with this job SAP_PERIODIC_ORACLE_SNAPSHOT but this is run successfully on the test server.
Can somebody tell me the error & the rectification for the same
Thanks & regards
Shishir

Please check
- ST22 for dumps
- alert<SID>.log of the database
- dev_w18 tracefile
Do you use the same patches on both DEV and this system?
Markus

I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

ITunes 6.0.3.5 installer crashed - IDriver.exe Unhandled exception

Just downloaded and attempted to install iTunes 6.0.3.5 on Windows XP Media Center Edition. installer crashed, IDriver.exe. Anyone else seeing this. Some details below.
Unhandled exception at 0x77511029 in IDriver.exe: 0xC0000005: Access violation reading location 0x0000005c.
ole32.dll!77511029()
ole32.dll!77511002()
ole32.dll!7751138f()
ole32.dll!77510052()
ole32.dll!7750fe4b()
ole32.dll!7750d878()
ole32.dll!7750d7e5()
ole32.dll!7750d95f()
rpcrt4.dll!77ef3ae8()
ole32.dll!77510332()
ole32.dll!775101c3()
rpcrt4.dll!77e9d4e5()
ntdll.dll!7c91056d()
ole32.dll!774fd3d0()
ole32.dll!774fe39c()
ole32.dll!7752962e()
ole32.dll!77601a25()
ole32.dll!7752fd56()
ole32.dll!7752fee4()
ole32.dll!774fee88()
user32.dll!77d51042()
IDriver.exe!0044b476()
IDriver.exe!00468ed1()
IDriver.exe!004699c8()
kernel32.dll!7c816d4f()
kernel32.dll!7c8399f3()

hi Madam!
hmmm. i couldn't turn up anything specific at event ID:
http://www.eventid.net/display.asp?eventid=26&eventno=2271&source=Application%20 Popup&phase=1
(i'm not a subscriber, so i can't follow up their "M" links ... not that there was anything specific to the IDriver.exe anyway.)
hmmmm. if you
b do
start running into problems, and you've got the time, it may be worth getting an install log to the moderators:
Gayle B, "If you are experiencing installation issues...", 06:20pm Oct 12, 2005 CDT
still at the early stage of troubleshooting these, i'm afraid, so i can't give you much more feedback than this. maybe keep checking in every day or so to check on any developments?
love, b

TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

Any answers how to fix it? All Im getting is error for the past 3 days!

Error upgrading idriver.exe

Similar Messages

Maybe you are looking for