Error upgrading the firmware from 3.0 to ny version on WLC

Hi All,
Please help me on this issue:-
I am currently running 3.0 version on my WLC 4402 and i want to upgrade it to the latest versions. I am following the correct procedure mentioned in the cisco link but its failing.
The error is TFTP Path is getting as:c:\temp\/ error and the firmware is not getting uploaded,
Plz see the snap shot and let me know what am i doing wrong.

I forgot to add, please read the release notes to see which version you can upgrade to as this will have to be done in stages.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

Similar Messages

Too many errors after upgrading the firmware to 1.0.3.10 on Cisco RV180W wireless router

My company purchased one Cisco RV180W wireless router few days ago and it worked normal with default firmware version of 1.0.0.30. Today I upgraded the firmware to version 1.0.3.10, the users can still access this router via wired and wireless devices, but on the dashboard I observed two major problems, one is the CPU utilization always shows 100%, another is the more and more errors appearing, on the Syslog Summary panel "Error" log has been up to 625 and is still increasing, there is one message repeatedly displaying in the log, see in below:
Wed Nov 13 13:55:25 2013(GMT+0800) [rv180w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 100 failed. status=-1
Who can tell me what does this error message mean and how to elinate this error message ? also how to deal with 100% CPU utilization ?
Thanks.

Hello,
i have been looking at different VPN routers over the last few weeks and i was very close to buying the RV180W, but then i stumbled across many posts reffering to firmware issues, one issue is that the cpu sits at 100% useage, i just wondered if this is a bug in GUI or is the CPU actually max'd out? has anyone had any resolution into this?
also the firmware on the emulator is a newer version than is listed on the support page, does anyone know when 1.0.3.14 will be released for download?
when i buy a new product i like to ensure that the system is fully upto date before its put into use but i obviously dont want to add any performance issues from the ofset due to the CPU useage.
i also have a could of questions if anyone can help
the Ipsec VPN, will this work with the Built-in VPN client for apple devices? (New IOS7), i am unable to find a quickvpn application for apple IOS.
is the site-to-site IPSec VPN also compatible with the Cisco Wvrs4400n router?
thanks in advance.

My iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194

my iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194 ... now my phone is not working ... every time an error 3194 ... I can not update ios and drop naturally I do not Pogue. hosts cleaned, cut off the antivirus ... did everything I recommend in this case ((what do I do? (
on other machines the same ...

Some additional suggestions here that may help if you haven't tried them:
http://support.apple.com/kb/ts4451
Regards.

ORA-03113: Error while upgrading the Database from 11.1.0.6 to 11.1.0.7

Hi,
I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
ORA-03113: end-of-file on communication channel
Process ID: 20826
Session ID: 170 Serial number: 3
I am getting the same error when trying to create the new database using "DBCA".
Please provide me the probable outcomes.
Thanks
Amith

Below entries found in alert_orcl.log file
MMNL started with pid=15, OS id=20571
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Thu Dec 03 20:11:11 2009
ALTER DATABASE MOUNT
Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
MMAN (ospid: 20557): terminating the instance due to error 27103
Instance terminated by MMAN, pid = 20557
Below entries found in the Trace file generated
error 27103 detected in background process
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
*** 2009-12-03 20:11:14.727
MMAN (ospid: 20557): terminating the instance due to error 27103

Cannot upgrade the firmware.

I am using a BEFW11S4 router Version 4. When I checked the site and after a full day of messing around I found that the problem I was having was covered in the latest update. I downloaded the bin file and tried the upgrade process from the router management. It failed. leaving the router still working but still with my original problem. Went to user groups and read what i could find. I turned off virus program, firewall and connected directly to internet to download bin file. (did this 4 times) tried again. failed. still did not upgrade the firmware and read more and downloaded the utility It could not access the router - Login failed. tried to login to router and logged in fine. spent another 4 hours trying to find any other suggestions either on the linksys site and in the forums and could not find anything. Keep in mind I have been using cisco products for about 20 years now and I am fully qualified Network technician. Please don't annoy me with any more simplistic suggestions I need a workable solution since I have about two or three hundred of these types of units out there. My interim solution was to go to staples and pick up a $49 Belkin router that works just fine. The solution suggested by the linksys person on the phone was to pay $29 to maybe resolve the issue. can anyone see the economics in that?
P.S. went to the lela download link in the message at the top of this forum. It says to download lela click here. Did so and got a really nice demo. there was no download. so if anyone knows where to download that it might be worth a try.
Message Edited by tekkiefirst on 07-17-2008 03:22 AM

Try upgrading the firmware of router ... reset it & reconfigure it ... if it works ... that will be fine if not ... then possibly the router is gone bad ...

FAQ Broken: How do I upgrade the firmware on a WRT54G Wireless-G Broadband Router?

I tried to view the above question in the FAQ, but it goes to the answer for a different question.
I then tried "How do I upgrade the firmware on my router?" a little further down,
but it acts like I'm not authenticated, and won't accept my Linksys Forums e-mail address
and password. When I try the password recovery, it says my e-mail address is invalid.
Can someone please point me to instructions for upgrading the firmware on my WRT54G?
Specifically, someone told me that the router needs to be listening on the default 192.168.1.1
IP address, but mine is listening on 10.1.1.2. Do I need to change this just to flash new
firmware, because that will be a little painful.
Thanks,

Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - "Default Gateway of Your Router"...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
**To Check the Default Gateway of the router...Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
**To all the above setting using the wired computer.

Best Practices for Upgrade UCS firmware from 2.0 to 2.2?

Hi
I have Cisco UCS system ( 2 FI, 4 Chassis with 32 Server ) running 2.0 firmware. Now I want upgrade to 2.2. When I check document "Upgrading Cisco UCS from Release 2.0 to Release 2.2", I see have 2 solution:
- 1. Upgrading from Release 2.0 with Auto Install -> Step simple but all server reboot at same time.
- 2. Manually Upgrading from Release 2.0. -> Step more complex but can upgrade server one by one.
My question:
- Can I "Upgrade the infrastructure firmware with Auto Intall but upgrade Server with Manual"?
- What is best for my case?
Thanks

Hi Phamcongtuan,
In UCS you can create host firmware policy that can be used to upgrade the firmware of your blades. Once you upgrade the infrastructure firmware, you can apply the host firmware policy to the service profiles of your blades. If you are using service profiles templates you will need to unbind the service profiles and apply the policy to the individual servers.
Host Firmware Package
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/cli/2-2/b_CLI_Firmware_Management_22/b_CLI_Firmware_Management_22_chapter_01000.html#concept_6982A188474A452CBFDBBDD7DD4921F3

MSI DR4-A,How do I upgrade the firmware? (How do I flash?)

I can't use my MSI DR4-A for anything now since i dont know how to upgrade the firmware (flash) can somebody please explain how to flash it better then the ReadMe file the lates update came with..cause i seriously don't understand the readme neither does any of my friends..so please help me someone...

I updated the Firmware yesterday, what I did was the following.
Downloaded the latest (2.50) firmware from the download page, and putted all the files (DVFLASH.EXE and 250D.BIN) on a floppy.
Went to Bootdisk.com and downloaded the win98SE OEM bootdisk (as suggested by others here) and ran the exe by using a second floppy.
Rebooted my pc with the newly created bootdisk in the floppy drive.
After a while you'll see the prompt.
Replace the bootdisk with the disk where DVFLASH.EXE and 250D.BIN is on and make sure the promt says A:\ (assuming this is your floppy drive).
Then type DVFLASH 250D.BIN
(also assuming the version is 250D.bin, which it is now atm).

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0

Dear SDN,
We are in the process of upgrading SAP 4.6b to 4.7 R/3 Enterprise.
Source Release:Windows 2000/Oracle 8.0.6/SAP 4.6b
Target Release:Windows 2000/Oracle 9.2.0/SAP R/3 4.7
Can anyone help us in explaining the procedure for upgrading the database from Oracle 8.0.6 to Oracle 9.2.0.
Thanks n Regards ,
Anantha Raman E.

Thanks Mr.Mohan
We tried to upgrade from 8.0.6 to 8.1.7 with the help of Inst Guides from service market place..the thing is we created another oracle home with new DBSID ither than the old DBSID...when we started the migration using 8.1.7 Data migration tool its not responding after the first phase CHECKING THE OLD DATABASE...
Pls help us in this regard
Whether we have to migrate or what...

I've upgraded the Discoverer from release 4 to 10.2.0.3

Hi guys,
I've upgraded the Discoverer from release 4 to 10.2.0.3 on two of my test systems.
the difference between the two test system is that one is SSL enable and the other one is not.
On the test system that is not SSL enabled users can access Discoverer via EBS fine but
on the tests system that has SSL enabled users cant so now they have to go directly to
the Discoverer link to access it. I've logged an SR with Oracle and they told me to edit the ssl.conf file
for the Discoverer side which I did and I placed the file directories and the locations of the certificates in that ssl.conf.
How can I get Discoverer to through EBS when SSL is enabled.
Thanks

Hi,
Firstly, you need to check that the ICX: Discoverer Launcher system profile has the correct https url to launch Discoverer.
Rod West

An error prevented the view from loading

I'm using SQL Server 2012 Express and I'm building a report with one table. I dragged and dropped two data set elements into the table that has two columns (Product Name and Product Description). Both the dataset elements have
a data type of varchar (50) in SQL Server 2012 Express. The table with those two elements is the only data I have in Design view. When I click on Preview, the Preview screen states 'An error prevented the view from loading.'. This is difficult
to diagnose, because in the Error List there are '0 Errors', '0 Warnings', and '0 Messages'. I would like help understanding if there is another error log I can observe to understand the issue, or if there are basic SQL Server 2012 Express Reporting
Services debugging techniques. Please help. Thank you,
Additionally, when I run the query in SQL Server 2012 Express and Reporting Services Query Designer the query results are correct.
Also, when I click the start debugging button, the report displays and I can export it to pdf, however the Previous still displays the error.

Well, funny stuff. I shut the solution down yesterday, then I booted my computer today and started the solution AND JUST LIKE MAGIC....it works. I can't explain it. Persistence pays, that's the answer sometimes.

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

I tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

Try Restoring it 3 times in a row and see if that works.
If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error.

I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK. It keeps telling me that this router is not supported. There is no firmware to roll back to. It worked fine until a power outage. HELP!

If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router.

Error upgrading the firmware from 3.0 to ny version on WLC

Similar Messages

Maybe you are looking for