Error uploading 100+ Mb file with quota/limit settings adjusted
Hi,
We have a SharePoint Site, 2003 on IIS 6.
We recently encountered an issue where uploading file larger than 100Mb will give us an error message, "An expected error occured".
We tried uploading within 50Mb files and its successful.
Got googling for a resolution and found some that might have this issue resolved, on
http://support.microsoft.com/kb/925083
We have modified the settings as per mentioned recommendations but still facing same issue. Here's what we did:
Did we miss something out? or any other cofig needed to be changed?
May we know as well what are the other configs/settings that are related regarding the issue we encounter?
Many thanks in advance,
Jerson.
Looks like you've missed the Web Application Settings for maximum file upload. Your screenshot suggests that you're on SharePoint 2007.
There's a number of links and articles out there but this one should have the info you need: -
http://www.atalasoft.com/cs/blogs/jake/archive/2009/02/19/changing-maximum-upload-size-in-wss-3-0-and-moss-2007.aspx
Steven Andrews | SharePoint Professional | http://www.twitter.com/backpackerd00d | https://baron72.wordpress.com/
Similar Messages
-
Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.
Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams -
How do I upload a CSV file with embedded quotation marks into a table via ETL
I'm having a problem importing a CSV file via ETL that contains double-quotes, and prior solutions aren't helping. My data looks like this:
A
B114SA
CHLORASCRUB SWAB INS SUBASSEMB
A
S273SA
CHLORASCRUB MAXI INS SUBASSEMB
A
2AB286
WEB ZEE ANTISEPT 5410\4.5" CD
A
2AB512
WEB PDI PVP IODINE PREP PAD 3870/4.5
A
2AB542
WEB ZEE CLEAN WIPE NP5410/4.5
If I set the "Text Qualifier" to ' " ', then run it, it falls over on the third row, with the following error:
- Executing (Error)
Messages
Error 0xc0202055: Data Flow Task 1: The column delimiter for column "Column 2" was not found.
(SQL Server Import and Export Wizard)
Error 0xc0202092: Data Flow Task 1: An error occurred while processing file "H:\AS400_file_transfers\LIMS\ACTITEMPF.CSV" on data row 3.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - ACTITEMPF_CSV" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Any help?Full support for embedded quotes was added in SSIS 2012.
Which version are you using?
http://blogs.msdn.com/b/mattm/archive/2011/07/17/flat-file-source-changes-in-denali.aspx -
Upload new pdf file with the same name
We are trying to upload a pdf file with a specific name (i.e
file.pdf) that has links to it on many pages of a website. We need
the pdf file to keep the same name but when we try to upload it,
Contribute is being 'smart' and changing the name so as to not
overwrite the file on the server. But we WANT to overwrite the file
on the server. Any ideas on how we can achieve this in Contribute?
Thanks so much (in advance) for your help!Actually, we have the same problem and I believe the answer
lies in the abilities that your role has assigned to it. The
solution that ThinkInk gave works *if you are allowed to delete
files*. If your role doesn't have that permission, then it will
just upload another copy of the file and rename it.
It's rather irritating that there isn't more control over
this...our server is littered with *thousands and thousands* of
duplicate files that originate from this situation.
If your administrator wants you to be able to delete files as
well, then you could get him/her to give you that permission, and I
believe this will allow you to overwrite the file by using the
"Publish file from my computer" option described above. -
How can I upload and download files with uiXML?
I want to implement upload and download files with uiXML. In some previouse topic I got answare to look in AbstractPageBroker class in JavaDOC. I did it but this is a very-very little resolution description for this problem. I think for developers YOU (UIX Team) must in very quick time to put some examples on the NET because this is a nice technology but with adecvate samplase and developers guide it will be dead very soon. I digging this forum for information. I see many many people have same problems about this technology. They like it and want to use and try but documentation is very very poor.
WE WANT EXAMPLES and separate forum for UIX. I think it deserve this.
If You have any more detailed documentation would be nice to put on the net. I have uixdemo.zip file but this is in very early fase of development. I downloaded it before fwe months. And now I can't find it anymore on youre site. What happend?Attila -
I went back and re-read the JavaDoc for AbstractPageBroker and MultipartFormItem and put together the following sample PageBroker based on the description from the JavaDoc:
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import javax.servlet.ServletConfig;
import javax.servlet.ServletContext;
import oracle.cabo.servlet.BajaContext;
import oracle.cabo.servlet.Page;
import oracle.cabo.share.util.MultipartFormItem;
import oracle.cabo.servlet.xml.UIXPageBroker;
* An extension of UIXPageBroker which stores all uploaded
* files in the temporary directory.
public class UploadingPageBroker extends UIXPageBroker
* Override of AbstractPageBroker.doUploadFile() which saves
* all files to the temporary directory.
protected String doUploadFile(
BajaContext context,
Page page,
MultipartFormItem item) throws IOException
// Get the location of the file to create in the temp directory.
// Of course a real application probably wouldn't upload files to
// the temp directory - just using this contrived example to
// demonstrate basic uploading support.
File file = _getFile(context, item);
if (file != null)
// Create a FileOutputStream. Of course, a real application would
// probably want to buffer the output
FileOutputStream out = new FileOutputStream(file);
// Write out the file
item.writeFile(out);
// Close up the output stream
out.close();
// We can return a value here to add to the PageEvent
// if so desired.
return null;
// Gets the File for the item that we are uploading
private File _getFile(
BajaContext context,
MultipartFormItem item
// Get the file name
String name = item.getFilename();
// If we don't have a file, bail...
if (name == null)
return null;
// Get the path to the temporary directory
File dir = _getTempDir();
// Return the File object
return new File(dir, name);
// Returns the path to the temprary directory
private File _getTempDir()
// Get the temporary directory from the ServletContext
ServletConfig sConfig = getServlet().getServletConfig();
ServletContext sContext = sConfig.getServletContext();
return (File)sContext.getAttribute("javax.servlet.context.tempdir");
In this sample, each uploaded file is simply saved in the temporary directory. You'll want to replace the code that creates the FileOutputStream for the uploaded file to use whatever OutputStream makes sense for your application.
BTW - I used the following UIX page to test this out:
<?xml version="1.0" encoding="UTF-8"?>
<page xmlns="http://xmlns.oracle.com/uix/controller">
<content>
<pageLayout xmlns="http://xmlns.oracle.com/uix/ui">
<contents>
<form name="uploadForm" usesUpload="true">
<contents>
<fileUpload name="uploadedFile"/>
<submitButton name="upload" text="Upload"/>
</contents>
</form>
</contents>
</pageLayout>
</content>
</page>
Hope this sample helps with the uploading part of your question. I'll see if I can provide a download sample in a later post. -
Uploading document using Powershell is throwing error- There is no file with URL
Hi.
I am trying to upload multiple documents to a sub folder in a library using powershell.
I am getting the error as : ForEach-Object : Exception calling "Add" with "3" argument(s):
"<nativehr>0x80070003</nativehr><nativestack></nativestack>There is no file
with URL 'server/TestLibrary/User_image/ab_3f_wht_ist_small_gif.gif' in this Web."
I have used the below code:
function UploadImages($weburl)
$docLibraryName = "TestLibrary"
$localFolderPath = "C:\Users\Imgs\user_image"
Add-PsSnapin Microsoft.SharePoint.PowerShell -erroraction silentlycontinue
$web = Get-SPWeb -Identity $webUrl
$docLibrary = $web.Lists[$docLibraryName]
$subFolderName="user_image"
Add-PsSnapin Microsoft.SharePoint.PowerShell -erroraction silentlycontinue
$web = Get-SPWeb -Identity $webUrl
$docLibrary = $web.Lists[$docLibraryName]
#Attach to local folder and enumerate through all files
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles() | ForEach-Object {
#Create file stream object from file
$fileStream = ([System.IO.FileInfo] (Get-Item $_.FullName)).OpenRead()
$contents = new-object byte[] $fileStream.Length
$fileStream.Read($contents, 0, [int]$fileStream.Length);
$fileStream.Close();
write-host "Copying" $_.Name "to" $docLibrary.Title "in" $web.Title "..."
#Add file
$folder = $web.getfolder($docLibrary.Title + "/" + $subFolderName)
write-host "folder is " $folder
$spFile = $folder.Files.Add($folder.Url + "/" + $_.Name, $contents, $true)
$spItem = $spFile.Item
Write-Host -f Green "Added Images to Library !!!"
$web.Dispose()
How to fix this?
ThanksHI,
Is the name of the image or the sub folder name the issue?
I have the images with the name as "ab_3f_wht_ist_small_gif.gif". folder name "User_image"
There are underscores on the file name, but there is no space. When I add the file from the library (using the UI), the image is getting added.
But adding through the powershell is giving the issue.
I have checked this:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/e810ad03-81ef-4fa6-aab8-ddc896a13ebf/getting-error-during-uploading-a-document-using-powershell?forum=sharepointdevelopmentprevious
but did not help.
Thanks -
Hello,
an upload of a new PARFile ends with the foll. error.
Anybody seen before?
com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.updateObject(ApplicationRepositoryService.java:717)
at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.storeApplication(ApplicationRepositoryService.java:389)
at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:306)
... 34 more
Caused by: com.sap.sql.log.OpenSQLException: Cannot assign a java.io.ByteArrayInputStream object of length 0 to host variable 18.
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setBinaryStream(CommonPreparedStatement.java:838)
at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setBinaryStream(PreparedStatementWrapper.java:401)
at com.sapportals.portal.pcd.pl.AttributeHeadersTable.storeAttribute(AttributeHeadersTable.java:431)
at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:248)
at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:541)
at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:616)
at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:640)
... 54 moreHi Nicolas,
In you development server,
1. Create a new iview (With new from PAR file option). The iView wizard gives you the option to choose the PAR file available on your development portal.
2. Now create a Transport Package. Navigate to System Administration - Transport - Export.
Navigate to your Transport Folder in PCD.
Now Create a new Transport Package and add the iView to the package (iView created earlier from PAR file).
3. Now go to Transport Package properties and Make sure, you are changing the property id prefix to * .
This will include every object associated with the iView while manually exporting.
4. Now click on the EXPORT button. This will export the required PAR file with. This in turn create an EPA file. save it to your desktop.
5. Now in Quality server,
Do the manual Import.
Navigate to System Administration - Transport - Import.
Browse the EPA file on your desktop and say IMPORT.
This way, you will be able to get your PAR file as well as your required portal object (here the iView) in quality server.
Hope this helps,
Cheers!!!!!
Biroj...
Points for useful answer will be appreciated.
Edited by: Biroj Patro on May 12, 2009 8:40 PM -
Problem in File Sender Adapter in File with quotes
Hi experts.
We're having a problem in File Sender Adpapter.
We've configured the adapter with FCC. We use the fieldSeparator = ; to convert the file to xml.
The problem arises when between two ; appears a quote. For insantce in this line:
HUMALVAL MASCOTAS S.L.;"AV/DE EUROPA SN;P.IND.ALCORCO;28922;ALCORCON;40.349968;-3.847452;
The adapter shows this error:
More elements in file csv structure than field names specified.
If the line was (without "):
HUMALVAL MASCOTAS S.L.;AV/DE EUROPA SN;P.IND.ALCORCO;28922;ALCORCON;40.349968;-3.847452;
everything would work correctly.
How could we solve this?
Thanks in advance.
Regards.Hi,
Please use xml.enclosureSign=u201C in your sender FCC.
Hopes this helps to you.
Regards,
P.Rajesh -
I'm trying to upload a PDF file (file type BIN) in SAP using the method cl_gui_frontend_services=>gui_upload.
This method in turn calls the routine GUI_BIN_UPLOAD in program LSFESF03 which then in turn calls the routine "virus_scan".
At the end the GUI_UPLOAD method comes back with SY-SUBRC = 7 (UNKNOWN_ERROR). SY-MSGID = VSCAN and SY-MSGNO = 036.
This leads me to believe that SAP is expecting that you've properly set up the virus scan profile in the IMG. Do you know if setting up Virus scan profile will resove this problem?
Have anyone come acros this issue?
Please advise how I can resolve this issue!!!!
We're using NW 2004S, ECC 6.0 , Basis 7.00Dear anilkumar86
Do you get any error/dump ?
Can you share with us a little bit of your code ?
Do you see anything strange when debugging ?
Is this a standard or custom application ?
Is the PDF a normal one or encrypted ?
Please provide more info so that we can better help you.
Kind Regards
/Ricardo Quintas -
Error in opening a file with name in chinese characters with Runtime.exec
The issue at hand is when I try to open a file with file name containing chinese characters in a localized environment in Windows through the following java code:
Runtime.exec("rundll32 SHELL32.DLL,ShellExec_RunDLL {File_With_FileName_containing_Chinese_character}");
the following error is thrown by windows.
Cannot open file "C:\??.txt".
with the exception
java.io.IOException: CreateProcess: [Ljava.lang.String;@f5da06 error=2
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:66)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:566)
at java.lang.Runtime.exec(Runtime.java:428)
at java.lang.Runtime.exec(Runtime.java:364)
at java.lang.Runtime.exec(Runtime.java:326)
at Launcher.main(Launcher.java:26)
When I try to use the same command (shown below) from the Windows Run command, the file opens sucessfully
rundll32 SHELL32.DLL,ShellExec_RunDLL {File_With_FileName_containing_Chinese_character}
Please suggest.
Thanks in advanceThis may be a file association problem. To solve that:
In Windows 7:
1. Right-click the file,
2. Select "Open With"
select [Your Program Here]
3. Check always use this program.
In Windows XP:
1. Locate the file as you have described above
2. Right click the file
3. Select Open with from the pop-up menu
4. Click Choose default program…
5. Select Excel in the Recommended Programs box
6. Check Always use the selected program to open this kind of file
7. Click on OK.
1. Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
2. Take a registry backup using the steps given here
3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
4. Exit Registry Editor
5. Undo Step 1 to make Excel available.
6. Restart the computer and verify it the issue is fixed.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire -
Uploading a text file with unknown number of texts
Hi ,
i have a flat file with around 10,000 record's.
each material number followed by different lengths & unknown number of text's separated by delimiter '$',
that need to be saved using save_text function module.
the file is as follows,
record 1 : material1$text1$text2$text3
record 2 : material2$text1$text2$text3$text4$text5$text6$.....
record 3 : material3$text1$text2$text3$text4$text5
record 4: material3$text1
- - - - - - - - - - - - so on ....
i created the following structure , to split and save each text separated by '$' , to save in TLINE of save_text function module.
types : begin of ty_file,
matnr type mara-matnr,
text1 type string,
text2 type string,
text3 type string,
text4 type string,
text20 type string,
end of ty_file.
i have uploaded the file and saved in table it_file type ty_file.
loop it_file into wa_file.
split wa_file at '$' in to matnr text1 text2 text3 text4 ....... so on.
endloop.
please, suggest me an alternate way to reduce the code, instead of creating a structure like above, so that each splitted text
stores in a single variable and is passed to TLINE of corresponding material, in save_text function module
thanks
vikiHi,
The flat file contains , material No. followed by it's text , each text sepearted by '$' symbol.
For each material i have to get all lines of text, and passed to tables paramter of save_text.
The Number of text' for each material is varying.
Please kindly suggest me , how many variables i need to create to hold each splitted text and store it in Tline
I wrote the below program assuming that the material number has maximum of 20 texts, it's working fine. But, what if the number of texts exceeds 20.
file :
4907507$ Druckrolle$ Durchmesser: 218 mm$ Länge: 750 mm$ Rollenwerkstoff: 1.4301/1.4541$ Oberfläche: gummiert$ Stärke Gummierung: 10 mm$ Näscher E 71224$$$$$$$$$$$$$$
1149598$ Tragrolle$ mit Stützringen$ Norm: ähnlich DIN 22112$ Durchmesser: 89 mm$ Mantellänge: 800 mm$ Form der Achsenden: A2$ Achsdurchmesser: 25 mm$ Achsanflachung: SW 18$ Einlegelänge: 808 mm$ Achslänge: 834 mm$ Lagerbezeichnung: 6305$ Anzahl Stützringe Form A: 6$ Anzahl Stützringe Form B: 4$ Anordnung links: 4$ Anordnung mittig: 6$ Anordnung rechts: 4$ Qualität Stützringe: N$ Durchmesser Stützringe: 159 mm$ Anzahl Zwischenhülsen: 7$ Anzahl Schlussscheiben: 2$ Erbö 3111.800.05.68
file upload
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
CHANGING
file_name = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = gd_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HAS_FIELD_SEPARATOR = '$'
TABLES
DATA_TAB = It_data.
loop at it_data into wa_data.
split wa_data-line at seperator into matnr_txt text1 text2 text3 text4 text5
text6 text7 text8 text9 text10 text11
text11 text12 text13 text14 text15
text16 text17 text18 text19 text20.
move matnr_txt to wa_material-matnr.
move text1 to wa_material-text1.
move text2 to wa_material-text2.
move text20 to wa_material-text20.
append wa_material to it_material.
clear wa_material.
endloop.
loop at it_material into wa_material.
WA_LINE-TDFORMAT = '*'.
WA_line-TDLINE = wa_material-text1.
APPEND WA_LINE TO IT_LINE.
WA_LINE-TDFORMAT = '*'.
WA_line-TDLINE = wa_material-text2.
APPEND WA_LINE TO IT_LINE.
WA_LINE-TDFORMAT = '*'.
WA_line-TDLINE = wa_material-text20.
APPEND WA_LINE TO IT_LINE.
G_THEAD-TDNAME = wa_material-matnr. " material number
G_THEAD-TDID = pa_id. " 'GRUN',
G_THEAD-TDSPRAS = pa_langu. " EN
G_THEAD-TDOBJECT = pa_obj. " MATERIAL
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = G_THEAD
SAVEMODE_DIRECT = 'X'
TABLES
LINES = IT_LINE
clear : wa_line, g_matnr.
refresh it_line.
endloop.
Edited by: jvsvijay on Jul 28, 2011 12:51 PM
Edited by: jvsvijay on Jul 28, 2011 12:53 PM
Edited by: jvsvijay on Jul 28, 2011 12:55 PM -
Problems uploading a text file with line feed characters from Windows
Hi,
I am using the FM GUI_UPLOAD to load a text file in which at the end of each line there is a line feed character. When I upload the file, the FM interprets the entire file as ONE record; it does not recognize the line feed character at the end of each file line. I am using the parameter in the FM "HAS_FIELD_SEPARATOR" and it does not do anything to remidiate this issue.
The funny thing is that WS_upload works like a charm and it separates every line in the text file according to the line feed character at the end of each file line.
Why a FM that is obsolete would work better and with less effort than the new one? We are on 4.6c and will go to ECC6.0 May 2009.
Can anybody recommenced a way to process this type of file using GUI_upload?
The file to process is downloaded from a bank Website into a Windows PC. Sending the file to Unix first is not an option.
Thanks,
Pierre Martinez
Edited by: Pierre Martinez on Aug 15, 2008 1:09 AMHi,
I have done that and Notepad does NOT interpret the line feed character. The file looks all messed up. Notepad does NOT split the data into records. The Hex character at the end of each file line is 0A.
The user will download the file into a Windows desktop from the bank's website and from there an ABAP program needs to read it and parse it. But the ABAP program can not even catch the entire file with gui_upload. WS_upload can catch it with no issues.
I tried catching the file into an internal table of data type string using GUI_upload, but it only catches two bytes of the file and nothing else.
I will try catching the file in some other type of data type for the internal table in gui_upload.
Once I catch it, I can split the file by the line feed character. I need to catch it first, but "my glove" is not big enough. Defining the internal table for the gui_upload as character is a guessing game since I really do not know how big the text file is since GUI_upload will put it in a one record.
Thanks. -
Re: Upload a flat file with multiple field seperators
HI Experts,
In my reports program iam trying to upload the data with in flat file with multiple seperators
but data is not uploading can ypu please suggest the solution.
Is there any function module to upload with multiple field seperators
Example of flat file:
E1234 JOHN BB HYD IN EN
E1234,BURE,BH,DSNR,IN,EN
E1236 KIWI KW HYT IN EN
E1237;BRAD;BW;MSRD;IN;EN
Thanks & Regards,
Raghusagar.GHI Raghu,
Use the function module 'GUI_UPLOAD'.
In that you have to specify the field_separator value = 'X' in export section.
Regards,
S.C.K -
Upload local TRU file with GUI_UPLOAD in ECC6
Hi all,
i need to upload a file with no "CR/LF" characters in a migration project from 46C to ECC6 system
in 46C, the FM WS_UPLOAD is working well :
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
filename = input_f1
filetype = 'TRU'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = '300'
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = ITAB_IN
EXCEPTIONS
This FM is obsolete in ECC6 and the GUI_DOWNLOAD FM populates only one line of the internal table. It means only 300 characters
and all the remaining file is ignored :
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = input_f1
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB_IN
EXCEPTIONS
Can any one tell me how can i read such file entirely in my internal table??
Thank youTry changing your code as this sample code snippet:
TYPES: BEGIN OF ex_upload,
record(800) TYPE c,
END OF ex_upload.
DATA: ex_itab TYPE STANDARD TABLE OF ex_upload,
wa_upload TYPE ex_upload.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file1
filetype = 'ASC'
* HAS_FIELD_SEPARATOR = 'X'
TABLES
data_tab = ex_itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17 -
Error uploading Document: "This file is empty" when it's not.
Hi all!
We're using an on-prem SP2013 farm.
We've recently received reports of an error received when trying to upload a document to a library. Specifically the error reads:
"This file is empty and needs content to be uploaded"
This occurs most often when using Chrome and the drag/drop feature to upload the doc.
However, the file is not empty, and if the user tries again a few minutes later, or manually uploads the doc, it works fine.
Any suggestions on how to resolve this as it's starting to really irritate our users?
Thanks!Hi,
According to your description, my understanding is that the error occurred when you uploaded documents to SharePoint using drag/drop feature in chrome.
Per my knowledge, we can upload office documents such as word, excel which are empty to SharePoint. But if we upload empty txt files to SharePoint, the error will occur.
Did you try to upload txt files to SharePoint?
Before you upload the files, I recommend to check the size of the files.
I also recommend to check the ULS log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS to see if anything unexpected occurred.
Best regards.
Victoria
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
Problem with message mapping ...
Hello, I have problem with message mapping. I implemented SOAP-to-RFC scenario. The source message is of type http://sntcz.cz/xmlns/holidays:MT_Holiday, the target message of type urn:sap-com:document:sap:rfc:functions:Z_GET_SUPERIOR. But some error
-
HT4836 How to make icons visible on Launchpad?
I downloaded Lion im my i Mac but no icons apear in Launchpad.
-
Installing Webdb 2.1 on Solaris big problem
"You entered an incorrect system password or an incorrect TNS names alias" error message while I was installing the Webdb 2.1 on Sun Solaris. During configation : In installer I entered other new home: ORACLE_HOME=/u01/app/oracle/product/webdb Host N
-
[MBA 2013] Choppy Scrolling in Safari and Adobe Reader
Hey guys just got my baby from the local Apple store a few days ago. This is my first ever Apple product and I am loving it in many ways... except for an issue with scrolling and animations. Despite having installed the latest drivers I am still gett
-
Backed up iPhone, will unplugging during later sync alter my backup files?
Ok my iPhone needs to be replaced and I was told to come home and do a backup of my data and come in to Apple tomorow to exchange for a new phone. I hooked up iPhone to iTunes and ran backup which took about 30 minutes or more. No problem. Then I unh