Error uploading file for OSS note 1644528

I am on release 6.04, service pack 40, of SAP HRCUS. I am trying to implement recently released note 1644528. I extract the zip file, save it, go to SFP, pull up form HR_F_W2_MULT_11 to be edited, and run transaction code FB_XDP_UP. I choose my file. It spins for a little while. Then I get the message "Error occurred while processing request". Don't know what the error is or why, or if it updated the form. (I suspect it did not as I did not get prompted for a transport request.) If I click on the error message, it just repeats itself. Has anyone experienced this and knows how to fix it?
Janice Ishee

That is interesting. Our Basis person says that note was applied this week. But note 1644528 in its prerequisites says "You have applied SAP Note 1630701 - Year End 2011 Phase I for U.S. Tax Reporter". It makes no mention of this second OSS note 1637361. I wonder if there is some sort of conflict there. I'll double-check with our Basis person to see if something might have gone wrong with its installation. Thanks

Similar Messages

Error Uploading Files - One or more files could not be uploaded

Hi, I used Adobe SendNow without any problems for years. Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files. Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again. If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files. I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

Hi,
Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
(The other way to upload files is to simply drag and drop them.) If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
You should now see the folder you just created. Open it up, and select the files you want to send.
If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

DRM-79819: Encryption error: Config file encryption is not valid for this m

Hi ALL,
Suddenly we got this error while running an export via batch utility. any ideas?
Error: DRM-79819: Encryption error: Config file encryption is not valid for this machine.

This could be an issue with your drm-config.xml file, the file that stores the DRM configuration information defined in the DRM Console. If a drm-config.xml was restored from an old backup or copied from another machine, this could well be the issue.
In this case, you can run the DRM Console to update the file and correct it. You may see a one-time error reported when the DRM Console starts up, but the Console app should correct the file automatically after reporting the error to the user.
If this does not resolve your issue, review the Windows App Event Log, to determine which DRM Server process(es) are also reporting this error (to narrow down any other potential issues with a config file for one of the DRM Server executables). I am guessing this error was observed in just the DRM Batch client, but related Event Log should also be present in the App Event Log.
HTH.
*** An additional note, if your issue proves to be the one above, you may need re-enter passwords on your defined Database Connections for defined DRM Apps. Try just re-running the DRM Console and re-saving the config initially, but be aware this may be a required additional step, re-entering the DB passwords after the updated encryption has been applied to the stored drm-config.xml file.
Edited by: 680314 on Jan 19, 2013 11:52 AM

"Error uploading file index.html. Click Resume to try again. If this problem persists, try again later. [550 /index.html: Not a regular file]"

When uploading to FTP Host it gives me this error "Error uploading file index.html. Click Resume to try again. If this problem persists, try again later. [550 /index.html: Not a regular file]" What does this mean and how can I fix it? I need to be able to upload my website and it is not allowing me to do so.

Hi
Are you still facing the same error ? Also, have you tried to export the file as html , does it shows same error ? You can upload the exported html to your server using any FTP client as an alternative.
Thanks,
Sanjit

Adobe Muse won't publish (Error uploading file)

After making simple animations using Adobe Edge Animate it seems as though none of the assets will publish with my site after importing them into Muse.
In Edge animate I saved for "web animation" and published. Then I went to muse and hit "place". I went to preview and everything works fine. When I go to publish there are always errors in uploading my assets with '.png' extensions.
Any help is much appreciated. I have completely scrapped my website and created another, reinstalled Animate and have renamed all my files, I'm not sure whats wrong here.
I got one animation working, and that can be seen here under the Photography section, but I have multiples that will be shown on my page at one time.
http://chasebodydesign.businesscatalyst.com

I get the error uploading file everytime I try publishing the animation.

File upload error: Error uploading file. Error moving uploaded file from temporary folder. (FILE_UPL

what causes this error:
File upload error: Error uploading file. Error moving uploaded file from temporary folder. (FILE_UPLOAD_ERROR)

On 5/17/07 4:26 PM, in article [email protected],
"Gü[email protected]" <> wrote:
>
> To my experience servers behave differently -- on some I really had to use
> 777, others are happy with 755.
>
> in regards to "any user" :: On most ADDT respectively MX Kollection - based
> backends I made the image & file upload feature available to user having e.g.
> the "levels" 1 & 2, but not 3 -- I wouldn´t expose something like this to all
> users
>
> Günter Schenk
> Adobe Community Expert, Dreamweaver
My backend is only for admin, so they are the only ones who can access the
upload pages. My concern is an images folder on the site being 777. Can't
anyone from the outside plant a file in that folder if they just know where
to find it using an ftp program? ?

Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

Any help is appreciated. Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
using photoshop elements 10 on imac with OSX 10.8.2
Thx

Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

LSO Content Player Error - HTTP Error 404 - File or directory not found

Hi All
Please could you assist.
I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
Result
Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
CPCFG.REPUS = username
ServerURL=http://iiscmshost.domain/LSO600/Content/ ok!
I was able to successfully publish the course from the Authoring Environment to the CMS server.
When selecting the starting the course from the portal with content player i get the following error.
HTTP Error 404 - File or directory not found
But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
Secondly can I change this reference to my LSO600/Content directory.
Please advise with any information. Point will be awarded.
Regards
Maahir

Dear Maahir,
We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
So, it seems like content player is not working properly. Bcoz we are launching course from http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
Could you please us know, how did you resolve the issue and tell me the cause of this issue.
Thanks and Regards
Obli

Cannot download Flash Player 10 due to - Error opening file for writing: Flash10d.ocx

Hello all,
I am having difficulty installing Flash Player 10. I open it up, and only 10% of the download bar finishes before I get the message:
"Error opening file for writing:
C:\Windows\system32\Macromed\Flash\Flash10d.ocx"
I am running Windows Vista with Internet Explorer, although I'm not 100% sure which version of IE it is and haven't found out how to check. I have McAfee for security, but I have already tried disabling the Firewall with no success.
My computer is new, so there's a chance that it already has Flash Player 10 on it since it belonged to someone else before it came to me, but I don't know how to check that either.
Any suggestions?
Thanks!

Let me clarify:
I have already tried disabling the firewall and running the installer again, but it didn't work.

Error opening file for writing when installing

I cannot install Flash on my Vista X64. I have tried running
the downloadable install and the online install. Any time I try to
run the install I get "error opening file for writing" when trying
to write C:\Windows\SysWOW64\Macromed\Flash\Flash9d.ocx.
I have uninstalled Fash first (it never worked anyway) and I
have rebooted. I even tried rebooting in Safe Mode but no matter
what I try, I cannot remove the existing Flash9d.ocx and installing
will not overwrite the existing file.
Even after uninstalling Flash and rebooting to safe mode,
Windows reports that flash9d.ocx is in use. So why is the file in
use after uninstalling?
Any help is appreciated.
Dale

Well, I finally figured out the problem with mine today. Of
course, I'd still like to know what nefarious purpose might be
involved with the Flash activeX file being loaded in memory even
after uninstall and reboot such that it cannot be removed from my
PC even in Safe Mode.
At least I got Flash working. I discovered that Flash was
disabled in IE.
In IE, go to Tools->Options->Programs and then Manage
Add-Ons. In my case, the ShockWave Flash Object was set to
disabled. I changed it to Enabled and I was able to install and use
Flash properly. Now I am just not sure I want to.
With the questionable practices of using the ActiveX control
even after uninstall, and making the file un-removable, along with
the extremely (in my opinion) dishonest practice of installing
Google Toolbar with Flash, I am hoping that Microsoft's Silverlight
puts Flash out of the market - and I'm no huge fan of Microsoft
either. With the new practices from Adobe, they are, in my opinion,
no better than any other spyware and malware purveyor on the market
- right up there with Napster and the dozens of follow-on products
that tricked users into installing unwanted software.

SAP Download to Excel2007 .Error occurs: file format is not valid

We met a problem when use BAPI EXCEL_OLE_STANDAED_DAT to generate local Microsoft excel 2007 file.
When open the generated excel 2007 file, Error occurs: file format is not valid. We do not know how to solve this trouble

what kind of data are you going for so that you have to use this specific FM?
i mean try using other FMs if its simple data...
one more thing is check what data is being downloaded, keeping a breakpoint just before downloading.

Scanning an uploaded file for viruses

Hi All,
I want scan an uploaded file for viruses.i there is any JAVA API where i can connect to Scan engine.
i have gone through the Symantic scan engine. where it provides the ICAP protocol to communicate with ScanEngine but i dont know how to communicate with that using java.
Please help me out with this.....
Thanks In Advance

Raghavendra_LR wrote:
Hi All,
I want scan an uploaded file for viruses.i there is any JAVA API where i can connect to Scan engine.
i have gone through the Symantic scan engine. where it provides the ICAP protocol to communicate with ScanEngine but i dont know how to communicate with that using java.
Well buddy i'm afraid there are no good open source solutions available for this however,we have commercial solutions provided by respective vendors.
[http://www.ciao.co.uk/McAfee_E_Business_Server_Java_API_Complete_package__5529793]
or the below provided a Java client / Local SDK libraries for which supports number of anti-virus softwares
[http://www.opswat.com/oesislocal.shtml ]
Hope that helps :)
REGARDS,
RaHuL

Erazer X700 new BIOS update flash is failing with 4 - Error: Rom file ROMID is not compatible

I am trying to apply the new Erazer X700 bios update from http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-erazer-x-series-desktops/le...
It fails when I run it in the admin cmd window, with message 4 - Error: ROM file ROMID is not compatible with existing BIOS ROMID. Any idea why I'm getting this failure?
Has anyone successfully applied the lastest X700 downloads?

I am also having this same exact issue. Any help would be greatly appreciated Lenovo.

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

[svn] 4561: Updated error. txt files for goodValidatorTest and patternFilterLoggingMessageFilterTest to fix failure on appservers other than Tomcat

Revision: 4561
Author: [email protected]
Date: 2009-01-16 10:59:37 -0800 (Fri, 16 Jan 2009)
Log Message:
Updated error.txt files for goodValidatorTest and patternFilterLoggingMessageFilterTest to fix failure on appservers other than Tomcat
checkintests: pass
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/validation/good ValidatorTest/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/validation/patt ernFilterLoggingMessageFilterTest/error.txt

Dude this worked fantastic. Thank you for posting.

Error uploading file for OSS note 1644528

Similar Messages

Maybe you are looking for