Error uploading role in GRC CUP5.2

Hello,
I have uploaded role in GRC CUP5.2 for 1 system sucessfully,but when i try to upload for another system it says 0 object uploaded sucessfully out of 50.
Moreover i tried creating role munally,it does. again i tired to upload by dleting all except 1 role,it should show me 0 object uploaded sucessfully out of1,but mesage remain the same 0 object uploaded sucessfully out of 50.
Please advice
Thanks,
Prasant

Prasant,
It should say 0 out of 1 imported. Did you save and close the file before importing? Paste the error log here so we can further analyze the issue.
Regards,
Alpesh

Similar Messages

Error while uploading roles from quality to production

Dear friends,
I have to upload roles from quality to production.
I have downloaded it from qualtiy but while uploading to production it is giving me an error "File does not contain valid data".
Can anybody tell me what could be the problem and how to resolve it.
Thanks in advance
regards
Nirgun

HI matore,
the best way is to transport the roles from DEV to QA and then to production as julius suggested
are you trying for mass down load are single role
Mass download
go to PFCG >> utilities>> Mass download>> select all the roles which you want to move it to production
and execute save it on desktop
now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file which is saved in desktop and click ok
mass generation of roles
in the menu click on utilities>>mass generation>>give the role names with you have uploaded and click on execute select all click on genetate button
download a single role
go to PFCG>>in the menu click on role>>click on down load and save it on desktop
now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file and click ok
now you needs to manully generate the role
do the user comparison
hope this helps
thanks
kishore

Urgent! Upload role failed because of connector error.

Hi!
I try to upload roles from an R3 system. However, it failed
with an error "connection failed".
The connection is checked but I dont see anything wrong.
I guess it is a problem in the permission on the R/3 system.
Please help .Points guaranteed. Thx!

Hi jennifer,
              See this tread its helpful for u.
              Connection to SAP component system failed.Check the system settings.
   Regards,
Senthil kumar.K

Error while uploading roles.

Hi All,
I am trying to upload roles in RE as per the steps mentioned in config guide.
I just followed and completed all the pre-requiste for mass role import.
But when i am trying to upload txt file, which i downloaded from SAP system thru transaction /VIRSA/RE_DNLDROLES.
I am getting error "Error in processing role infomation. Role not imported".
Please help me in resolving this problem.
Thanks in Advance.
Regards,
Pravin

Hi Pravin,
here's what you need to do:
- create the role attributes (Business Process, Sub Process, Project/Release)
- create the download file in SAP via RE_DNLDROLES
- create the role information file (manually)
Format: tab delimited (role name, business process, sub process, release)
Z_AP_PAYABLE FINANCE ACCOUNTS_PAYABLE ALPHA_RELEASE
Z_AP_CLERK FINANCE ACCOUNTS_RECEIVABLE BETA_RELEASE
From the error message, it seems you have not created the info file.
Hope that helps,
Frank.

Role approver removed from role in GRC

Hello Experts,
I am a fresher to SAP GRC. Please help me on the below issue.
In SAP GRC 5.3, for some roles role approver has been removed and some roles automatically uploaded to GRC. The role that are uploaded to GRC should not be and while checking there is no change log for the role. For other roles for which role approver have been removed, also there is no log for which recent approver have been removed.
Can you tell how it happened and who did this or way to troubleshoot.
Thanks in Advance.
Biswaranjan

Hello samiran,
Thanks for your reply.
Yes we have already uploaded the OLD file. But my concern is how we can troubleshoot to find out how it was corrupted as no one did the change. we can find the change log for the approver change for any role in GRC 5.3 .
Or it is not possible to find out how it happened???
Regards,
Biswaranjan

Help! I could not upload roles from R/3 to EP60 -Stack13!!!

Hello!
I could not upload roles from R/3 to EP60 (NW SR01 Stack 13).
I Read "How to... Upload Roles from ABAP-based Systems"
The error I am getting is:
<b><b>Connection to SAP component system failed. Check the system settings.</b></b>
I am able to run all MSS, ESS, Best Practic iViews. Connection works between EP and R/3 for transactions!
There are in log:
#1.5
#0007E90949DE01890000000200000C580004051FA517544A#1131533378906#com.sap.portal.connectors.R3#sap.com/irj#com.sap.portal.connectors.R3#Zaitsev#54158####86548911510e11dacc260007e90949de#Thread[PRT-Async 15,5,PRT-Async]##0#0#Error#1#/System/Server#Plain###(R3/BW) Failed to get connection. Please contact your admin. #
Help!
Thanks,
Sergey.

Hi Sergey,
Good Morning, i am new to portal implementation, i request to u if u have the implementation steps of ESS and MSS packages could u please send that steps to my mail id: [email protected]
i am waiting for your reply.
Regards,
Jagadish Babu Kanikanti.

Roles in GRC ERM 5.3 (SP11)

Hello Gurus
We have a couple of dude about to import the Roles to ERM.
Our systems: GRC AC 5.3 (last SP) & SAP R/3 4.7 (SP53):
1) We have around of 450 Roles in BackEnd R/3. All they roles exisiting must being fed in the file downloaded of /VIRSA/RE_DNLDROLES??
2)We to use trx PFCG for maintain the Roles in the Company. Each week we to modify the roles for user's request and pure market's strategy. Those roles modified also must uploaded or updated in ERM?
Thanks for all.
Erick Verbena
SAP Basis
PROLAMSA

Hi Eric,
you can upload entire role in GRC from R/3 system but this will be a resource hungry practice. Better you update the role by increamental method.
Arpan

ERM error: Field ROLE not a member of INPUT

Hi Experts,
After upgrade to 11.2 I'm having this error.
It appears at the Define Authorization stage after I chose transactions and clicking continue.
The connectors and JCos are working.
Please assist.
Thx,
Vit V
edit: All XMLs reloaded and system restarted.
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Current Module: |RE| Conversation: |cnvRole| Screen: |scrSearchTransaction|
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Module#RE#Conversation#cnvRole#Screen#scrManageAuthorization#Action#continueTCodeSearch#
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Changing Screen: FROM: scrSearchTransaction TO scrManageAuthorization
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG com.virsa.framework.Context : clearScreenRep :   : 6 entries cleared from screen repositiory
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Handler found:class com.virsa.re.role.actions.AuthAuthorizationDataAction
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG SAPConnectorDAO.java@365:com.virsa.comp.connectors.dao.jdbc.SAPConnectorDAO.findByConnectorName()connectorId: 5; lngId: 1
2010-04-20 11:59:05,590 [SAPEngine_Application_Thread[impl:3]_39] DEBUG SAPConnectorDAO.java@365:com.virsa.comp.connectors.dao.jdbc.SAPConnectorDAO.findByConnectorName()connectorId: 5; lngId: 1
2010-04-20 11:59:05,590 [SAPEngine_Application_Thread[impl:3]_39] DEBUG com.virsa.service.sap.SAPConnectorHelper : getClientFromSLD :   : INTO the method SapConnectorDTO :com.virsa.service.sap.dto.SapConnectorDTO@3e0a2020[conClass=,system=COD200,appId=COD200,host=consit-sap,systemNo=00,client=200,userId=codcom,SystemLang=EN,sysId=cod,messageServerGrp=default,messageServerHost=consit-sap,password=xxxxx,type=ECC600,userName=,description=COD200,isSLD=true,isActive=true,isHRSystem=false]
2010-04-20 11:59:05,590 [SAPEngine_Application_Thread[impl:3]_39] ERROR Field ROLE not a member of INPUT
java.lang.Throwable: Field ROLE not a member of INPUT
     at com.sap.mw.jco.JCO$MetaData.indexOf(JCO.java:9534)
     at com.sap.mw.jco.JCO$Record.setValue(JCO.java:14923)
Edited by: Vit Vesely on Apr 20, 2010 12:10 PM

Hi guys,
The problem is finally resolved.
1. Implement SNOTE 1441463
2. Implement SNOTE 1443612
3. Register key for object /VIRSA/RE_OBJ_INFO
4. In SE03 >> Administration >> Set System Change Option. Change /VIRSA/ to modifiable
5. In Se11 open data type /VIRSA/RE_OBJ_INFO in change mode with the key from p. 3
6. Edit structure according to Note 1452772. Save and activate.
7. Implement SNOTE 1452772
8. Restart grc~reear (or the server)
...or wait for VIRSANH patch 12
Hopefully it will work for you aswell.
Kind Regards,
Vit

Adobe Muse won't publish (Error uploading file)

After making simple animations using Adobe Edge Animate it seems as though none of the assets will publish with my site after importing them into Muse.
In Edge animate I saved for "web animation" and published. Then I went to muse and hit "place". I went to preview and everything works fine. When I go to publish there are always errors in uploading my assets with '.png' extensions.
Any help is much appreciated. I have completely scrapped my website and created another, reinstalled Animate and have renamed all my files, I'm not sure whats wrong here.
I got one animation working, and that can be seen here under the Photography section, but I have multiples that will be shown on my page at one time.
http://chasebodydesign.businesscatalyst.com

I get the error uploading file everytime I try publishing the animation.

ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!

I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input!

Defaults Roles Doubt - GRC 10.0

Hi All,
I have a query regarding default roles in GRC. In the role search screen when the user selects a role, there will be a defaults roles column which shows all existing defaults roles for different systems maintained in GRC.
Actually our client requirement is that when a user selects role for ECC only defaults roles defined for ECC should show up. But currently default roles column shows all defaults roles defined in GRC.
Is it possible to achieve our scenario? Anyone came across same issue?
Regards,
Sai.

Dear Sai,
the behaviour is standard as you have defined parameter 2011 as ROLE. To change the output you might need help of an ABAPler.
Alternatively you can change parameter 2012 to REQUEST and then the requestor won't see the default roles as they are added to the request after submission. Only the approvers can see the added default roles.
Best regards,
Alessandro

How to change the "Page Flow Error - Unsatisfied Role Restriction" page

When you try to access a page and are denied authorization to it, Weblogic automatically redirects you to a
"Page Flow Error - Unsatisfied Role Restriction" page, on the bottom of which tells you what roles you have to be in in order to access the resource. My question is how can I change this page to match the general look and feel of my application?

I know you asked this almost a month ago, so you may have already figured it out... but you just need to add a handler for com.bea.wlw.netui.pageflow.UnfulfilledRolesException. Something like this:
@jpf:catch type="com.bea.wlw.netui.pageflow.UnfulfilledRolesException" path="roles-error.jsp"
You can put it at the class level of a specific page flow, or at the class level of WEB-INF/src/Global.app, which will apply it to all page flows.
Hope this helps.
Rich

Upload to Blurb fails after exactly 30 minutes (There was an error uploading your book's pages...)

After exactly 30 minutes after the upload has started, I get this error:
There was an error uploading your book's pages. Would you like to try again? The choices given are "Retry Upload" and :"Cancel"
When I retry, the same thing happens - fails after exacly 30 minutes. I am using a window 7 pc (with Service Pack 1) and using Lightroom 5.4. I have turned off my firewall and antivirus programs, rebooted, and connected directly to my router (not wireless) and ensuring my pc does not go to sleep, but did nothing I try wil help.
Anyone else get this? Any ideas? Thanks!

Hello,
I had this problem as well - the upload to Blurb would not work. Creation of a PDF and export as JPEG in the book module worked.
For me, the solution was to turn off the Windows Firewall while uploading. Now it works!
Two-in-Love (Photographe de Mariage en Suisse Romande)
http://www.two-in-love.ch

Error uploading photo book

I have a 50 page book I have ordered before using iphoto. It came out beautifully. I wanted to order another copy and now the book assembles fine, but I get an error during upload of the 50 meg book. The upload seems to work fine for about 7-10 meg, then stalls for about a minute, then zips up to 50 meg and there is an error message saying, there was an error uploading, please try again.
All this from the same computer I successfully ordered it from several weeks ago.
Any thoughts?
Also, does anyone know who I should contact at Apple about this??
Thanks,
Paul

here is the link to Apple's ordering problem page - http://www.apple.com/support/photoservices/account_troubleshooting/
Also note that you can do an exact reorder without uploading within 40 days - http://www.apple.com/support/photoservices/ordering_options/ - maybe that will help you out
Can Apple reprocess a previous order?
Apple stores the image files of book, card, and calendar orders for 40 days, and print orders for 20 days, from the date of purchase. We will be unable to reprocess an order on your behalf once the files have been removed from our servers. To ask Apple to reprint a previous order, please email us using the form below.
Note: Reprocessed orders will ship to the same address and be charged to the same credit card listed on the original order.
LN

Srm User interface - change settings : Error in role assignment

Hi Gurus,
Users are facing issue when they are changing settings in the SRM user interface site .
Go to SRM user interface SIte --> Change my settings --> change date format or decimal format .
When they save it --> Gets an error - error in role assignment .
What can be the issue. It's same in Dev and qa .
Waiting for your reply.
Points will be rewared .
Thanks
Munish Kumar

Hello Munish,
Laurent Burtaire wrote:
If you do a where-used for message number i gave you, you will find two message calls in methods from /SAPSRM/CL_PDO_MO_USER_ACCOUNT class.
Put a break-point to check if one of them is done. Problem cannot be due to missing authorization as there is no data in SU53 for concerned user.
Regards.
Laurent.

Error uploading role in GRC CUP5.2

Similar Messages

Maybe you are looking for