Error upon closing or upload to Printer Cs6

Hi All,
I am getting an error upon closing my created business card.:
"The font AlienEncounters could not be embedded in the PDF document because of licensing restrictions. Stroked text will not be visible."
For one there is no Stroke to the text. Another is the fact even when saving out as a PDF high quality print PDF same thing.
I am over at an online print shop and am getting the same error upon upload. IT will not accept the file....?
Alien Encounters is the stock font that comes with Cs6 why am I getting this? I am not sure about saving as a PNG if I lose any rez?
Thanks for direction on this
SF

Jacob,
Thanks for stopping in... I am unclear on step 2
Also when trying to select all my text boxes it is not doing to well. It could be my way of layout??
I have two AI files within one document, the created logo in AI and then another AI file for a business card. The Alien Encounters Font does not have licensing bits as it states
when closing the saved file. I assume that is the problem.
Do you know if I will lose any res if (the artboard this file was created on) is actual size of 2x3.5 biz card and if I save it out as a PNG with 350ppi that should stay good enough for print? When I send it over to the printers and than they upload it to a 2x3.5 card stock to print it on... I know keeping it vector art thru and thru is best but it looks like I may need this work around
Thanks again
SF

Similar Messages

AE CC 2014 Error upon closing project "...layer named '10' is missing or does not exist...

Upon closing (or quitting) an After Effects CC 2014 project I'd been working on for several days I'm presented with the following error message dialog boxes 39 times:
In this comp I've masked the same piece of video into 38 triangles to create a transition effect. I named those layers "1" to "39" for organization. There are another 39 layers (the flip side of those triangles that come into view when I rotate the main triangles), and the masks of those layers are pick-whipped to the corresponding primary 39 layers.
Despite this error message, nothing is visibly wrong in the project. The video that's the source of those layers is NOT missing. I can see it. It's a 1920x1080 Apple Pro Res 422 Quicktime, sitting in the same folder as a bunch of other clips. If it WAS missing wouldn't I see the color bars placeholder? t tried reimporting the clip and option-dragging it back into those layers, but I get the same message.
Upon opening the project I get this message, 39 times:
Again, the software is apparently confused, thinking that something is missing when it's not.
So is this very complex project corrupted now? That would be a drag. At least it still seems to work, I just have to hit "OK" on these dialogs 78 times to open and close the project. I was expecting more for $50/month.
Thanks.
Shawn Marshall
Marshall Arts Motion Graphics

We found what the culprits were, but I don't know why they'd cause these error messages.
To recap, I have a piece of HD video that I've duplicated 39 times with a different triangular mask on each layer to re-create the whole frame (moving the anchor points of each layer as needed). The idea is that I then rotate those layers in 3D somewhat randomly, revealing a different video clip on the back side. To create the "B-side" video for the back sides I duplicated the original 39 faceted layers and parented each to its corresponding "A-side" piece. I created some opacity expressions to make the A-sides disappear halfway through their rotation with the B-sides appearing at the same point.
My plan was to vary the mask shapes on the A-sides to create variations on the transitions, so I enabled an expression on the masks and pick-whipped the mask shapes on the B-sides to their A-side counterparts. That seems to be the problem. Here's the expression (applied to layer 26B):
thisComp.layer("26").mask("Mask 1").maskPath
I repeated this for all 39 B-side layers. Then I duplicated that comp and inserted new video into the transition. At some point some part of the software decided some layers were missing or something, creating the above error messages. The comps still worked as designed; it was just error messages that I had to repeatedly dismiss. Once I deleted all of these mask expressions the error messages stopped.
Before deleting those expressions we tried renaming the layers (1-39) so they were unique within each comp (Train1, Rail1, etc) but that didn't work.
Feels like a bug.
Shawn Marshall
Marshall Arts Motion Graphics

Fatal error upon installing software for C4795 printer.

I'm trying to install the printer software for my C4795 on my laptop which is running Windows Vista (64 bit)...BUT...I keep getting a fatal error during the installation and then it proceeds to uninstall. I've tried all the recommended fixes but still get the same errors. The printer works fine on my desktop computer that is running Windows XP and wired into the printer. Any help would be appreciated.

Welcome to the forums @MuzikizuM
I read your post about the installation error you are seeing for our Deskjet F2180. I would suggest trying out the steps in the guide below. Hopefully this will allow you to install the printer successfully!
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Let me know the results
Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Received GPF error upon closing Adobe Acrobat 8

Hello, does anyone know if there is a fix for this?
(1) In windows XP, Install Adobe acrobat 8 professional.
(2) Launch adobe, Click Help-->Check for Updates... to update to 8.1.2 or the latest.
(3) Launch adobe, again, select Edit-->Preferences, select "Documents" tab, turn on the checkbox "Enable Version Cue file-version manager".
(4) Download Adobe Acrobat 8.1 SDK
(5) Program a simple MFC to include the acrobat.cpp and acrobat.h from the SDK, and code a method like this and make a call to it:
#include "acrobat.h"
BOOL CTestApp::OpenAdobe()
COleException exceptionInfo;
CAcroApp acrobatApp;
TCHAR szErrorMsg[255];
CAcroAVDoc acrobatDoc;
if( !acrobatDoc.CreateDispatch("AcroExch.AVDoc", &exceptionInfo))
exceptionInfo.GetErrorMessage(szErrorMsg, 255);
AfxMessageBox(szErrorMsg, MB_OK|MB_ICONERROR);
CString strWindowTitle = "Adobe";
CString strFileName = "C:\\acrobat.pdf";
if(!acrobatDoc.Open(strFileName, strWindowTitle.GetString() ))
AfxMessageBox("Error Launch Adobe.", MB_OK|MB_ICONERROR);
return TRUE;
(6) Make sure there is a pdf file "acrobat.pdf" under the root of C drive.
(7) Run the MFC program, it will launch adobe and open C:\acrobat.pdf.
(8) Close adobe, receive following error:
The instruction at "0x0700558a" referenced memory at "0x0700558a". The memory could not be "read".
Click on OK to terminate the program
This issue seems only occurs after the latest patches are applied to adobe 8, and after the option in step (3) is turned on, and if launching adobe programmatically through API call.
Thanks in advance if anyone knows how to fix this or if there is something I can get from adobe to get it fixed.

So, you're enabling an option that requires a piece of software you don't have installed to function properly, and you're surprised it can cause unexpected behaviour?
Adobe Version Cue is a seperate product. It does not install with Adobe Acrobat. Why would you enable an option without actually knowing what it does, and then complain that it causes problems?
http://www.adobe.com/products/creativesuite/versioncue/

I opened up my photoshop (circa 2004) and got a message that it has expired (or somthing to that efffect). This CS2. It have the hardcopy. Upon closing it and reopening it I got a message that there was "serious error" and I needed to reinstall. Upon rein

I opened up my photoshop (circa 2004) and got a message that it has expired (or somthing to that efffect). This is CS2. I have the hardcopy. Upon closing it and reopening it I got a message that there was "serious error" and I needed to reinstall. Upon reinstalling with my hard copy I got the same error message. Any thoughts? Are all former versions of the creative suite disabled to promote use of "the cloud version"?

This Adobe document should help to explain the situation for CS2:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Error upon loading a video from the iTunes in the cloud

I bought a movie called Epic and when I tried to play on my Apple TV via streaming from the iTunes in the cloud it was playing until yesterday it start displaying an Error message "Error upon loading this video content". How long does it take for that to be corrected?

OK well, I think all that stuff about licensing is not true, unless explicitly stated
Just working off a gut feeling (or perhaps just wishing it weren't true)? I suggest actually checking:
https://www.google.com/search?q=us+rip+dvd+legal
http://en.wikipedia.org/wiki/Digital_Millennium_Copyright_Act
Typically any mention of ripping DVDs may get a topic removed from the ASC forums since it is discussion of an "illegal activity" and subject to Terms of Use.
The key thing here is if you upload a file to your library, then try to replace that same file with the same file name, iTunes will ignore it and NOT overwrite the file that's already there. You have to delete the file off first and THEN add to library again.
Correct, iTunes works on a file basis not a track label basis. That's why I said delete the old file. You could have 20 identical files with the same name (in different folders) and iTunes will add them all right next to each other. Nothing new in iTunes behavior there. In fact if you had gone to the location where the media file was stored and copied a new one over the old one with the same name I believe iTunes would still know it wasn't the original. You can, however, edit a file using a third party tool and save it in place and iTunes will accept the changes without having to re-add the file.

Internal Server Error when trying to upload and manage files

The instructor was experiencing this difficulty on Tuesday 1/13, after the notice was closed. I just
went into their site again(1/14/09 2:48pm), launched iTunes U and received the same error after clicking on 'Upload And Manage Files' in their iTunes U page.
I was able to reproduce the same error on our iTunes U site.
https://deimos.apple.com/WebObjects/Core.woa/EditFiles/indiana.edu

I have only found two that work correctly. They were created the same way and permissions are the same. I don't know why one works over the other.
/Indiana University/Project Sites/Oncourse Team - FAIL
/Indiana University/Project Sites/SyllabusTest - Success
/Indiana University/Project Sites/CHEN-TES 101 01 - FAIL
/Indiana University/Project Sites/UITS Podcast Team - FAIL
/Indiana University/Project Sites/ePortfolio Playgroun - FAIL
/Indiana University/Project Sites/Testong - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 OC DEV C201 DEV2 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14438 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14552 - success
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14392 - FAIL

Error upon submitting form (SWF/Flex)

I often get this error upon submitting a SWF(Flex) LC form. The workflow proceeds just fine, but it acts like Workspace is having an issue cleaning up. Does anyone have any experience with what this is?
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at MethodInfo-12904()
at lc.core::DefaultResponder/fault()
at lc.core::Token/callFaultHandlers()
at lc.core::Manager/handleFault()
at lc.core::Manager/handleFaultEvent()
at MethodInfo-2828()
at lc.core::DefaultResponder/fault()
at mx.rpc::AsyncToken/http://www.adobe.com/2006/flex/mx/internal::applyFault()
at mx.rpc.events::FaultEvent/http://www.adobe.com/2006/flex/mx/internal::callTokenResponders()
at mx.rpc::AbstractOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::faultHandler()
at mx.rpc::Responder/fault()
at mx.rpc::AsyncRequest/fault()
at NetConnectionMessageResponder/statusHandler()
at mx.messaging::MessageResponder/status()
This is my method that submits the form.
private function OnAllDocumentsUploaded(event:Event):void {
status_box.Flash("The DCF is being submitted to the server for processing!");
// remove any Rejections
delete form_data.Role.Rejected;
lcConnector.setSubmitData(form_data);

No, I don't. It's intermittent. I thought it perhaps happened when I threw up a <mx:Box> just before data submission to let them know the data was being submitted, but that's not it.
My fear is there is something I am leaving hanging, but there isn’t enough documentation on writing Flex forms for LC to really know what that might be.
I can't imagine what would be trying to talk to the task after the form has been closed.

Uploading for prints: are files resized automatically?

My files are >20 MB, but I just want some postcards etc. Will iphoto automatically resize, or will the upload go at max resolution, in which case the upload is going to bog down unless I go to someplace with a faster connection. Thanks for any tips.

Books, calendars and cards are converted to PDF files at 300 dpi for uploading and printing. I'm not sure about prints but the iPhoto prefs indicate that prints are set at 300 dpi max. Don't know if that's for local printing only but I don't think so.
Click to view full size
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

MBP (13-inch, early 2011) goes into hibernation instead of safe sleep upon closing the lid (only when using battery power)

MBP details
13-inch MacBook Pro, early 2011 (model identifier: MacBookPro8,1)
Running Yosemite, OS X 10.10.1 (however, problem started while using Mavericks)
2.5 GHz Intel Core i5
4 GB memory
Symptoms
* the MBP goes into hibernation instead of sleep upon closing the lid on battery power (i.e., when AC adapter is NOT connected)
-- problem does not occur when AC adapter is connected
* putting the computer to sleep by other means does not induce the problem; these other means include:
-- [i] option+command+Power,
-- [ii] Apple Icon --> Sleep,
-- [iii] in Terminal: pmset sleepnow
* the battery is NOT getting drained at all; if I close the lid on 87%, the battery is still at about 87% when I get the MBP back up and running
To be as clear as possible:
(1) MBP is on and in use (power source: battery); battery is at X%
(2) the lid is then closed
(3) the battery indicator light glows bright for about 10 seconds, then shuts off, and with it so does the MBP (all fans and sounds cease)
(4) opening the lid and pressing any key on the keyboard does nothing (the computer is not sleeping)
(5) to turn the MBP back on, I must hit the power button once; this brings up and the gray screen and loading bar indicative of returning from hibernation
(6) log in; battery is still at X%
Attempted Solutions / Fixes
There are Apple Discussions addressing similar MBP issues, many of which at least have work-arounds, if not full-blown solutions. However, I have tried many of the proposed work-arounds and solutions; nothing has solved my problem. Such attempted solutions include:
* made sure EFI/SMC firmware was up to date
* updated all software
* logged in as a different user
* booted in Safe Mode
* reset the PRAM
* repaired disk permissions using Disk Utility
* repaired additional disk permissions in recovery mode (a la this chron.com advice)
* ran the Apple Hardware Test multiple times (short test while plugged in, short test on battery, extended test while plugged in, extended test on battery)
* booted from an external known-good OS on USB drive
* reseated the RAM
* used MemTest to test the RAM's health (it was good)
* tested my battery's health with the app Battery Health (it is healthy!)
* booted my computer with one stick of the MBP's original RAM at a time (figured "why not?")
* booted my computer using other sticks of RAM
* checked my power management settings using PMSET in the terminal (e.g., pmset -g); tried various hibernation modes (e.g., sudo pmset -a hibernationmode X, where X=0,1,3, etc)
* searched/grepped through my power management logs and Console messages to look for googleable items (e.g., pmset -g log | grep WORD, where WORD=failure, sleep, etc); still have not found help online
* brought the MBP to a Mac Genius
-- he ran some further tests, but found nothing;
-- he re-installed my OS as a hopeful-hail-mary-just-maybe-last-ditch effort; the problem persisted!
-- we both agreed that we had ruled out a software cause
-- he offered me to leave my MBP to get fixed for a flat fee of $300.00 (which after a couple weeks of trying to figure this out is starting to sound more and more reasonable)
Given that it is likely not a software issue, what hardware might it be? By booting from an OS on an external drive, I think I've ruled out a bad hard drive or hard drive cable. Also, given that inducing sleep in any way other than closing the MBP's lid does not cause the problem, it seems there might be a wire (or something) in the hinge section of the MBP that gets moved when the lid is closed possibly causing some kind of short circuit...or something.
If someone with more experience interpreting Console messages, for example, can help, I'd be happy to provide some logs, or any additional information.
Thank you for your time and consideration.

Ok, this is a crazy-simple, quasi-embarrassing fix, but I'll post it anyway just in case anyone is having a similar problem (for example, this guy: Changes to pmset being ignored).
Some time around late last August / early September (2014) this issue began happening for me (specifically, issue = closing lid while on battery power induces hibernation / shut down instead of sleep --- independent of hibernation mode). Maybe it was when I upgraded to Yosemite (not sure what the exact date of that was). As detailed in my original post, I frantically tried everything I could think of... At that time, however, I had quite a few presentations and posters to create and present at meetings and conferences, so I held off fixing it for a couple of months and returned to it this past week, where I tried a few more things listed above, but again to no avail...
This morning, I simply tried fudging around with all my power management settings again (via pmset in Terminal). The simplicity of the fix surprised me. But now that I understand it, I know it is likely the same fix for other threads I've read, such as the one above:
(TLDR in bold)
(1) Take note of your power management settings (Terminal: pmset -g custom)
(2) Is the "standby" flag set to 0? If so, set it to 1. Wa-la! Done.
This fix is crazy and embarrassing b/c I was so close to it for so long. I tried changing my hibernation modes multiple times (sudo pmset -a hibernatemode X, where X=0,1,3,25,etc). I read about manipulating other PMSET settings that helped other people with newer MBPs, like "autopoweroff" and "autopoweroffdelay" --- settings that I do not have on the MBP early 2011 (check your settings: pmset -g cap). And most amazingly of all, I even messed with the "standbydelay" setting, trying to make it so long that my computer should never go into hibernation... Yet, from what I can tell by looking over my notes, I never simply set "standby" from 0 to 1.
There are interesting questions that arise due to this fix. For example, why did this problem persist on clean installs of OS Yosemite? Is "standby" being set to 0 the Yosemite default? I'm not sure. If it is, then Kappy was right: this was normal behavior... It just wasn't always the normal behavior...at least not for my MBP. Normal behavior (hibernatemode 3) used to be (and now is again) that the MBP goes into safe sleep, and then only after an allotted amount of time will it go into full-blown hibernation.
NOTE: the "standby" and "standbydelay" PMSET settings are not available in some earlier MBP models (e.g., my brother has a 2010 and does not have these settings); so if you're having a similar problem with an earlier model, this fix might not be of any help to you.

HP ePrint from excel add-in: Error while getting driver name for printer

Trying to use add-in for ePrint from excel/word I get, "error while getting driver name for printer \\...HP DesignJet 800PS 42 by HP," with an option to select "OK" and that same message repeats with each printer in our network, and then it doesn't allow me to print using the add-in. However, I can print normally to HP Go Web, open up Print and Share, then print it from there. This happens with excel and word. I have Office Suite 2007.

Hello modameister,
Sorry you are having issues with this printer and the ePrint add-on. There are a couple of questions I would like you to answer please.
1. What operating system are you using? (XP,VISTA,7,MAC OS X)
2. What and how much data are you trying to print?
3. Have you tried to copy and paste the data into a different application or tried using the snip it tool?
4. Are you receiving any .dll errors (mscms.dll)
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

End routine error upon trying to transport

Hello folks,
Getting a RC 8 upon trying to transport an end routine piece to our QA environment.
No syntax error upon trying to check the code in the end routine. The custom infoobject that i m trying to populate in this code is set to 'Initial' in the transformational rules. Plz can you share any clues there. This transformation is attached to an Infocube.
Here is the code:
data: v_fiscper(3) type n.
loop at RESULT_PACKAGE assigning <result_fields>.
    clear v_fiscper.
    v_fiscper = <result_fields>-fiscper+4(3).
    case v_fiscper.
      when '001' or '002' or '003'.
       concatenate 'Q1,' <result_fields>-fiscyear
           into <result_fields>-/bic/zfiscqtr.
      when '004' or '005' or '006'.
       concatenate 'Q2,' <result_fields>-fiscyear
           into <result_fields>-/bic/zfiscqtr.
      when '007' or '008' or '009'.
       concatenate 'Q3,' <result_fields>-fiscyear
           into <result_fields>-/bic/zfiscqtr.
      when '010' or '011' or '012'.
       concatenate 'Q4,' <result_fields>-fiscyear
           into <result_fields>-/bic/zfiscqtr.
    endcase.
endloop.
Appreciate help on this one.
Cheers !!

How is InofObject zfiscqtr implemented?
Additional:
Try to use RSA1 transport connection.
Select your transformation, cube and so on and collect all necessary objects.
Regards
Andreas
Edited by: Andreas Schindler on Nov 26, 2009 10:24 AM

I get this error upon launching PS5: "could not open a scratch file because the file is locked .."

I get this error upon launching PS5: "could not open a scratch file because the file is locked or ou do not have the necessary access privileges. Use the 'properties' command in the Windows Explorer to unlock the file". The applicaiton will not launch.
Supporting information - I recently changed the scratch disk from C drive to D drive (the back up/restore drive). The application wont launch so I cant change it back to the C drive.
Questions:
- How to I fix this .. from windows explorer how do I find "the file" that the error message refers to?
- Other ways to fix this?
Thanks Steve

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

Problem: An error occured during the uploading process.

Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.

Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Error upon closing or upload to Printer Cs6

Similar Messages

Maybe you are looking for