Error 'url not in active profile'
Sometimes when trying to log onto the internet (with my N85) I get the error: URL not in active profile. I change the connection (as I seem to have about 3 or 4 options to select with virgin, but that doesn't always help. I'm trying to open a bookmark, so not sure why its says its not in my profile.
I'm confused. Any suggestions as to what/where I should be looking.
I found a solution, restarting my phone seemed to fixed the problem.
Reminds me of when IT departments say "have to reboot your pc?" Simple, but effective in my case.
Similar Messages
-
Error : URL not called due to an error
Hi All,
I developed a Web Dynpro ABAp application and tested it through a user with SAP_ALL Profile, and am getting the following error message:
The URL http://sileccdev053.simondelhi.com:8000/sap/bc/webdynpro/sap/zadobe was not called due to an error.
Note
The following error text was processed in the system DEV : WebDynpro Exception:
The error occurred on the application server SILECCDEV053_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program CL_WDR_VIEW_ADAPTER===========CP
Method: IF_WDR_NW7_DELTA_RENDERER~CALCULATE_DELTA_BLOCKS of program CL_WDR_VIEW_ADAPTER===========CP
Method: IF_WDR_NW7_DELTA_RENDERER~CALCULATE_DELTA_BLOCKS of program CL_WDR_WINDOW_CONTENT_ADAPTER=CP
Method: SET_CONTENT of program CL_WDR_NW7_INT_WIN_ADAPTER====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server SILECCDEV053_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server SILECCDEV053_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 300 -u: PWCABAP -l: E -s: DEV -i: SILECCDEV053_DEV_00 -w: 0 -d: 20110215 -t: 111729 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
In ST22 we get the following:
WHAT HAPPENED:
The exception 'CX_WD_GENERAL' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WD_ADOBE_SERVICES==========CP' has to be
terminated.
ERROR ANALYSIS:
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_FP_API_REPOSITORY", which was raised in the program
"CL_FP_WB_HELPER===============CP",
specifically in line 7 of the (include) program
"CL_FP_WB_HELPER===============CM00V".
The cause of the exception was:
Object ZADOBE does not exist
Please Suggest something.
Cheers!!!
UmangHi Umnag,
I think this application is using any Adobe Form and there is any issue wth the form interface.
Please check syntax of the Adobe form as well as Form Interface. The Interface methods are throwing some exception which is not handled in the CL_WD_ADOBE_SERVICES.
You can put a break-point in the costructor of above class and pin-point the issue yourself.
Hope this helps!
Reagrds
Vineet -
Downloaded movie to ipad, won't play. error - url not available on this server
Downloaded a movie on the iPad, played it once. Now get error message the "url not available on this server". How do I fix?
Where did you rent them from?
iTunes? If so are they downloaded enough that they can be played?
If from another App, its best to contact the App developer. -
I'll pretty much just get a message that says something like google.com is invalid when I know it for sure it. Even if I just click on a link on like Gizmodo or something, I'll get that message. I'll close the message and then I'll click the link again and it would actually load up now.
== This happened ==
A few times a week
== A while ago. Perhaps a couple weeksClick here and request assistance.
(91679) -
Hi All,
I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
If anyone could assist with this is would be much appreciated.
Many thanks
Logs below:
<![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
<![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
<![LOG[Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
DateTime = "20141218122103.273000+000";
PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 1752;
]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
<![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
<![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
<![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
<![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
<![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
<![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
<![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
<![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
<![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
<![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80 CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
thread="1752" file="libsmsmessaging.cpp:8422">
<![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
<![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
<![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
<![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
<![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
<![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
file="tsmanagerutils.cpp:118">
<![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
<![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
file="tsmanagerutils.cpp:165">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
<![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
<![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
<![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">4005 can mean a few things, Some common can be The wrong BIOS time, or a a bad Hard drive. look at those two first.
-
Time Characteristics not become active gives error in BW 7.4
Hi Experts
We have imported IO's in BW 7.4. Some info Objects are active but some are not getting active specially Time Char.
It gives error while activating. I am attaching the error image. I am looking forward experts input how these Time Info objects can activate.
Thanks
SwetaThere may be inconsistencies with table entries for table 'RSDCHATHJ'. Please check them.
Regards,
Jagan -
Activation error: Printer not activated, error code 20
I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
ReyWhat operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Error Table /CRYSTAL/PERS_VALUE could not be activated
Dear expert,
I'm upgrading BOE to SP3 and then after that SP3 FP3.3.
I got a problem when upgrading to SP3, it's on BW side when importing Transport Request file:
Personalization transport (K900693.r21 and R900693.r21)
The error log is:
Following objects not activated/deleted or activated/deleted w. warning:
Table /CRYSTAL/PERS_VALUE could not be activated
(E- Nametab for table /CRYSTAL/PERS_VALUE cannot be generated )
Table /CRYSTAL/PERS_VAR could not be activated
(E- Nametab for table /CRYSTAL/PERS_VAR cannot be generated )
I've read SDN thread:
Re: SAP IK Transports Error
SAP IK Transports Error
And OSS note:
1484086 - TABLE /CRYSTAL/PERS_ could not be activated when importing transports for SAP Integration XI 3.1 SP3
Roland Hoeller says the problem happens when you apply the SP3 transports on a SAP system that never had any SAP IK transport files installed.
But actually all the BW transport files in the initial installation of BOE XI 3.1 was imported successfully. Including the problematic transport file K900580.R21 and R900580.R21
It was imported with status 'Warning' below:
R21K900580 JJI Business Objects Personalization objects
And the error log is:
Following objects not activated/deleted or activated/deleted w. warning:
Table /CRYSTAL/PERS_VALUE was activated with warnings
(W- Enhancement category for include or subtype missing )
Table /CRYSTAL/PERS_VAR was activated with warnings
(W- Enhancement category for include or subtype missing )
Then that note advises to use BW transport file from:
a. previous version (eg. FP2.6) then re-import the problematic SP3 BW transport file
b. use BW transport file from later Fix Pack (eg. FP3.1, FP3.2, or FP3.3)
Since i'm upgrading to FP3.3, i go with option (b).
But i notice that in the installation files of FP3.3 there's no file K900693.r21 and R900693.r21 in the extracted folder 'transport'.
The installation file i used is:
BOBJINTGRSAP03P_3-10007514.EXE
I even checked (FP3.2 and 3.1) but that file is not there too.
BOBJINTGRSAP03P_2-10007514.EXE
BOBJINTGRSAP03P_1-10007514.EXE
How to get the correct K900693.r21 and R900693.r21 files?
Thank you very much.
Kind regards,
aswinDear Stratos,
I found out the answer for this.
Apparently in new FP release (eg. FP3.3), SAP replaced that TR:
R21K900693 JJI Business Objects Personalization objects
with:
R21K900705 JJI Business Objects Personalization objects
That's why it no longer exists.
Kind regards,
aswin -
URL not found error while loading photo on Linux
Hi,
I have a AIR 2.0 appliaction which works perfectly well on Windows but while I run it on Linux Loader object can't load any photo. I tried many path variations but I always get Error #2035: URL Not Found.
Here's how I load a photo (with hard coded URL)
_imageLoader.load(new URLRequest("/home/piotr/105755/damage_photos/17.jpg"));
I'm sure that "/home/piotr/105755/damage_photos/" path is correct. I pasted it to files explorer address text input and expected directory was opend. I'm also sure that 17.jpg file exists in that directory.
When I trace IOError message it says: Error #2035: URL Not Found. URL: app:/home/piotr/105755/damage_photos/17.jpg
My questions are:
What "app:" does in my URL... can it cause the problem? If yes, how can I get rid of it?
Is there anything specific about UNIX systems and Loader that should I know about?
How can I load file from hard drive other way than by Loader object?
I use AIR 2.0 SKD, Flex 4.5 SKD and Ubuntu 10.04. Could anyone help me, please?Hi,
Just a test, can you try to do this:
var f:File = new File(File.userDirectory.nativePath+File.separator+"105755"+File.separator+"damage_photos" +File.separator+"17.jpg");
_imageLoader.load(new URLRequest(f.url)); -
Error in Windows 7: User Profile Service was not logged on. The user profile can not be loaded. Administrator profile and the code does not work. What do I do?
HP G5384sc desktop pcHello
Unfortunately I did not manage to fix my computer yet. My printer is broken so I bought a new one, but since I do not have administrator rights, I can not connect the new printer, so I have to write all-installing notes down with pencil and simultaneously translate them into Danish so it is a very slow process. I'll tell you if it succeeds, otherwise there is of course the primitive way to buy a new computer, but it's the same as giving up. Not yet.
Until now, many thanks for the good suggestions.
Kind regards
Birgeres -
When I try to activate my home sharing on iTune I get this error message."home sharing could not be activated because an error occurred(-2146762487)" .How can I solve this problem?
I have a brand new iMac with all the newest updates etc etc, Safari logs me in without any problem but iTunes etc is just not working.. and I have the same message...Any ideas how to resolve this?
"Home Sharing could not be activated because an error occurred (5506)." -
Activity profile for planning does not seem to work..
Hi,
All I need is to trigger a custom idoc filled in a custom FM and to be sent when the planning button in vt01n or vt02n is clicked and then save button is clicked. I have everything else setup..
Message type is SHPMNT
output type is ZEDI
have a process code in place
partner profile in place...
so i set the activity profile too
for custom shipment type zout - profile name zxxx and the variant maintained has the message type set as zedi and medium as 6.
what is missing...output is not triggered !!
pl help...Hello, Slabby01.
Thank you for the question. Try closing all open applications and power cycle the device. Test the results after processing these steps. If the issue persists, try going through the troubleshooting steps in the second article below.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Troubleshooting Siri
http://support.apple.com/kb/ts4079
Cheers,
Jason H. -
These errors only appear on my laptops. Running FBMW Add Ons with grease money on 1 laptop , and the other laptop does not have these installed. The problem started 3 days ago.
From Firefox Error Console:
Warning: Error in parsing value for 'background-image'. Declaration dropped.
Source File: https://support.mozilla.com/en-US/questions/new?product=beta&category=b2&search=IN+FB+Mafia+Wars+getting+this+message+++Unexpected+Error+has+occurred.+++Requested+URL+not+found%3A++400+++What+do+I+do%3F&showform=1
Line: 0
These types of errors appear whenever I try doing any new actions in Mafia Wars.Hello everyone with AVG, I have the simple solution. 1) Open your AVG Antivirus File 2) Under Tools, Open Advance Settings 3) On the left side, Click on LinkScanner 4) On the Box on the right-hand side... Unclick "ENABLE SURF-SHIELD" Click OK on the bottom of the page. PROBLEM FIXED
-
I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.
Where exactly did you get this phone?
Do you have a SIM in the phone?
There are 2 primary causes for this.
Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it. -
I get this error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
Here is my code:
import fl.transitions.*;
import fl.transitions.easing.*;
//Assign CLICK listeners for each menu button
Home.addEventListener (MouseEvent.CLICK, buttonClicked);
Big_Square_Baling.addEventListener (MouseEvent.CLICK, buttonClicked);
Wrapping.addEventListener (MouseEvent.CLICK, buttonClicked);
Chopping.addEventListener (MouseEvent.CLICK, buttonClicked);
Tillage.addEventListener (MouseEvent.CLICK, buttonClicked);
Raking.addEventListener (MouseEvent.CLICK, buttonClicked);
//Make the buttons look like buttons
Home.buttonMode = true;
Big_Square_Baling.buttonMode = true;
Wrapping.buttonMode = true;
Chopping.buttonMode = true;
Tillage.buttonMode = true;
Raking.buttonMode = true;
//This loader is used to load the external swf files
var loader:Loader;
//URLRequest stores the path to the file to be loaded
var urlRequest:URLRequest;
//This array holds all the tweens, so they
//don't get garbage collected
var tweens:Array = new Array();
//Stores the current page we are displaying
var currentPage:MovieClip = null;
//Stores the next page that we are going to display
var nextPage:MovieClip = null;
//This function is called when a menu button is clicked
function buttonClicked (e:Event):void {
//Create a new loader instance
loader = new Loader();
//If we clicked the first button, we load the the Home page
if (e.target == Home) {
urlRequest = new URLRequest("Home.swf");
loader.load (urlRequest);
//If we clicked the second button, we load the Big Square Baling page
else if (e.target == Big_Square_Baling) {
urlRequest = new URLRequest("Big_Square_Baling.swf");
loader.load (urlRequest);
//We load the Big Square Bale Wrapping page since we know that the home page or the Big Square Baling page
//is not clicked
else if (e.target == Wrapping) {
urlRequest = new URLRequest("Wrapping.swf");
loader.load (urlRequest);
//We load the Chopping page since we know that the home page, the Big Square Baling page, or the
//Big Square Bale Wrapping page is not clicked
else if (e.target == Chopping) {
urlRequest = new URLRequest("Chopping.swf");
loader.load (urlRequest);
//We load the Tillage page since we know that that the home page, the Big Square Baling page, the
//Big Square Bale Wrapping page, and the Chopping page is not clicked
else if (e.target == Tillage) {
urlRequest = new URLRequest("Tillage.swf");
loader.load (urlRequest);
//We load the Raking page since we know that the home page, the Big Square Baling page, the
//Big Square Bale Wrapping page the Chopping page, and the Tillage page is not clicked
else {
urlRequest = new URLRequest("Raking.swf");
loader.load (urlRequest);
//We want to know when the next page is finished loading
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, fileLoaded);
//This function is called, when we have finished loading a content page
function fileLoaded(e:Event):void {
//The loader contains the page we are going to display.
nextPage = e.target.content;
//Let's animate the current page away from the stage.
//First, we need to make sure there is a current page on the stage.
if(currentPage != null) {
//Tween the current page from left to the right
var tweenX:Tween = new Tween(currentPage, "x", Regular.easeOut,
currentPage.x, 500, 1, true);
//Decrease the alpha to zero
var tweenAlpha:Tween = new Tween(currentPage, "alpha", Regular.easeOut,
1, 0, 1, true);
//Push the tweens into an array
tweens.push(tweenX);
tweens.push(tweenAlpha);
//currentPageGone will be called when the tween is finished
tweenX.addEventListener(TweenEvent.MOTION_FINISH, currentPageGone);
//There is no current page, so we can animate the next
//page to the stage. The animation is done in
//the showNextPage function.
else {
showNextPage();
//This function animates and displayes the next page
function showNextPage():void {
//Tween the next page from left to the center
var tweenX:Tween = new Tween(nextPage, "x", Regular.easeOut,
-200, 0, 1, true);
//Tween the alpha to from 0 to 1
var tweenAlpha:Tween = new Tween(nextPage, "alpha", Regular.easeOut,
0, 1, 1, true);
//Push the tweens into an array
tweens.push(tweenX);
tweens.push(tweenAlpha);
//Add the next page to the stage
addChild(nextPage);
//Next page is now our current page
currentPage = nextPage;
//This function is called when the current page has been animated away
function currentPageGone(e:Event):void {
//Remove the current page completely
removeChild(currentPage);
//Let's show the next page
showNextPage();To help figure out what's wrong, you can use an absolute path to your SWF files. (Such as "C:/Program Files/My Project/MySWF.swf") If the error goes away, then the filename is correct and there is simply some confusion as to where the local path is. Remember that the parent project (your main.swf) should be in the exact same directory as the SWFs being loaded)
~Plystire
Maybe you are looking for
-
Hi Everybody I just want to know that if my Coherence server becomes dead due to any failure (like network etc.) how do my client (running on .NET) will get a notification for that from server. And how could I implement failover for coherence. Thanks
-
Why do I keep seeing error 107?
I try and download the trial of Adobe After Effect [CS5] but everytime I see the error message saying that it can't connect to adobe.com [error 107] I've looked at the solution page and done everything on there but it still won't let me download it
-
i have garrys mod on steam and i also have counter strik and when i play everthing is purple and black also people have the giant word error in them
-
Hi All , i need to change the Material type SFG to FG with New account Detemination .how to do it? what are the FI settings i have to do ? Here i have to Change Few Materials on Semifinished to Finished so that New Valuation Class with separate GL ac
-
Problem after Implementing BADI
Hi all, I implemented BADI MB_MIGO_BADI it was working fine, but it was deleted and again trying to implement second time it is showing the message Implementation ZTEST_MIGO migrated (see long for instructions) and choose enhancement spot and i impl