Error using expdp on Oracle XE

Hi,
When I try and do an export in Oracle XE I get the following error:
D:\>expdp SYSTEM/vodafone SCHEMAS=XE_DATA DIRECTORY=dmpdir DUMPFILE=xedata.dmp
Export: Release 10.2.0.1.0 - Production on Thursday, 29 June, 2006 10:47:10
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Producti
n
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
Any ideas??
/John

Hi guys,
The problem was that Oracle didn't have access to the directory I created. So I created a directory in the Oracle home directory and it worked..
Thanks,
John

Similar Messages

Is incremental backup supported using expdp in oracle 10.1.0.2

Dear All,
I heard that incremental backup is not supported in expdp of oracle 10.1.0.2.Here we have a databse which is running in noarchivelog mode.We are not allowed to shutdown the database coz it's live one.......
Our database is growing daily by 1 gb.Current expdp backup is running upto 4 hrs.Size is laready 40gb.So Is there any way where I can take incremental backup?
Please suggest me the type of backup.I have one more quetion if we can use rman backup in noarchive log mode?
Thanks,
Kris

Dear Werner,
Thnaks for your quick reply.....Here are the errors when I try to do Rman backup in noarchivelog mode.......
RMAN> backup database;
Starting backup at 17-AUG-07
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=139 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 08/17/2007 13:29:38
RMAN-06056: could not access datafile 12
I have moved a datafile to different drive today .Is that anything got to do with the above error?
Thanks,
Kris

Signon page gives invalid OS error, using Firefox on Oracle Linux

Installed PeopleSoft HCM 9.2 (PT 8.53.02) using Oracle Virtualbox VM template. Installed X Windows and GNOME Desktop and virtualbox guest additions. When I connect to the signin page using firefox (17.x) on this same VM which is running Oracle Linux, I get the unsupported OS errror. Checked browser.xml and that looks fine.
Error: We've detected that your operating system is not supported by this website. For best results use one of the following operating systems ....
Any help would be appreciated.
Thanks
DS.

user13635748 wrote:
Interesting, I didn't know that. But the error message does list "Oracle Enterprise Linux" as one of the supported options.Hmmm, that's right, rather embarrassing. However, according to the all certification matrix that I can read on My Oracle Support, Linux is no where supported for web browsing.
Seems a bit paradoxal. It probably has to be reported to the support, I don't think that's a VM peculiar issue.
But why not using the web browser from the host instead of the one from the guest VM ? Will 'solve' if that's a Windows host...
Nicolas.
Edited by: N Gasparotto on May 8, 2013 9:18 PM

Oracle DLL Error using AQ (in Oracle 10g) from Visual Basic

Hi, everybody
I have a Visual Basic 6 (with SP 6) application which connect to Oracle through an ODBC connection. Not only the client but also the server use Oracle 10.2.0.3.
The application accesses to Oracle Queues by using OraAQ, OraDatabase, OraSession... objects.
Everything works all right until the moment of closing the application; when the OraAQ object is disposed, an error in a DLL occurs. The DLL is orageneric10.dll, and it causes a Windows error which closes the application. Windows XP is used as operating system.
The error only happens with the OraAQ object; other objects are disposed without any problem.
Please, if somebody have an explanation, let me know. It is a very important issue for us.
Thanks in advance

Has anyone discovered an answer to this yet? I get the same issue, but am struggling to find a solution anywhere.
(VB.NET on Visual Studio 2005, Flash CS5, Flash Player 10.1.85.3, AS3)

JDBC runtime error using data source (Oracle 9i server & Oracle 8i client)

Hi,
Wud someone help me with this? Why am I getting this run-time error?
D:\shilpa\javaprogs>java -classpath %classpath%;.; CreateMovieTables
javax.naming.NoInitialContextException: Need to specify class name in environmen
t or system property, or as an applet parameter, or in an application resource f
ile: java.naming.factory.initial
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
40)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243
at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.jav
a:280)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at CreateMovieTables.initialize(CreateMovieTables.java:18)
at CreateMovieTables.main(CreateMovieTables.java:101)
This is how I have created the data source:
public void initialize() throws SQLException, NamingException
          Context initialContext = new InitialContext();
          DataSource dataSource = null;
          dataSource = (DataSource) initialContext.lookup("jdbc/Oracle");
          connection = dataSource.getConnection();
I have set the classpath to: C:\j2sdk1.4.2_08\jre\lib where the jndi.properties file exists.
Here's the jndi file:
datasource.name=jdbc_1
datasource.url=jdbc:oracle:thin:@10.119.5.98:1521:sea77db0
datasource.classname=oracle.jdbc.driver.OracleDriver
datasource.username=tr1
datasource.password=tr1
What am I doing wrong? Cud someone help me with this? It's working fine when I don't use the data source. Maybe I am doing something wrong.
Regards,
Shipf1

After reading your posts, I noticed that my eyes were bleeding...
Wud someone help me with this?
Cud someone help me with this?
Thanks. It worked. BUt, IF i wanna ...
I don't[b] wanna...
what shud i do then?
Thought I should return the favor encapsulating the essence of this writing style:
So, IF i cud, I wud, but If i don't wanna shud i anyway?
Just funnin around... Good luck on your problem though.
Darn it, my eyes are bleeding again!

Using expdp in database with database vault gives error-39165

Hi,
Please help me with the below mentioned scenario.
I have oracle database 10.2.0.2 and DATABASE VAULT installed on top
of it.
I am trying to export one table DM05 beleonging to DIP schema and
dump it as expdip.dmp. I issue the following command for this.
But it stops with the error mentioned below.
expdp dip/oracle directory expdp_dir tables="DIP".\"DM05\" dumpfile=expdip.dmp
ORA-39165: Schema DIP was not found.
ORA-39166: Object DM05 was not found.
ORA-31655: no data or metadata objects selected for job
Job "DIP"."SYS_EXPORT_TABLE_01" completed with 3 error(s) at 07:02:28
Thanks and Regards,
Dipesh

hi
Oracle Error : ORA-39166: Object string was not found.
Cause: If exporting or importing over the network, either the user specified an object name that was not found in the source database or else the user lacked the proper EXP_FULL_DATABASE or IMP_FULL_DATABASE role that would allow them to access the object another in another schema. For importing from files, the user specified an object name not found in the dump file set.
Action: Retry the operation using the correct object name.
Hope this helps
CHeers

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

Error when trying to use LogMiner with Oracle 8.1.6.0.0

Hi everybody,
I'm trying to use LogMiner with Oracle 8.1.6.0.0. When I execute the following code with SQL*Plus, I have an error.
BEGIN
DBMS_LOGMNR.START_LOGMNR
(options =>
dbms_logmnr.dict_from_online_catalog);
END;
The error displayed by SQL*Plus is:
PLS-00302: 'DICT_FROM_ONLINE_CATALOG' must be declared.
Please, how to solve this problem?
Thanks you in advance for your answers.

user639304 wrote:
Hi everybody,
I'm trying to use LogMiner with Oracle 8.1.6.0.0. When I execute the following code with SQL*Plus, I have an error.
BEGIN
DBMS_LOGMNR.START_LOGMNR
(options =>
dbms_logmnr.dict_from_online_catalog);
END;
The error displayed by SQL*Plus is:
PLS-00302: 'DICT_FROM_ONLINE_CATALOG' must be declared.
Please, how to solve this problem?
Thanks you in advance for your answers.Looking at the 8.1.7 doc set (the oldest available on tahiti) I get no hits when searching for 'dict_from_online_catalog'. Searching the 9.2 doc set turns up a reference. Looks like you are trying to use an option that isn't available in your version of Oracle.

JDriver error using WLS6.1 w/ Oracle 8.1.7

Hello,I am getting the error listed when starting my weblogic server after creating a connection pool and datasource through the weblogic (6.1) console. I am currently using the jDriver 5.1.0 oracle kit. I used this kit previously with the WLS6.0sp1 installation and had no errors.Any suggestions? Thanks in advance!-Christine--***** BEGIN ERROR*******Starting Loading jDriver/Oracle .....-------- LOGIN ERROR CODE: 24327---------- LOGIN ERROR CODE: 24327<Aug 17, 2001 1:40:22 PM EDT> <Error> <JDBC> <Cannot startup connection pool "ConnPool" weblogic.common.ResourceException:Could not create pool connection. The DBMS driver exception was:java.sql.SQLException: ORA-24327: need explicit attach before authenticating a user - (user/********)--*****END ERROR******--

Also you don't have to have any additional 5.1.0 oracle kit here. WLS6.1
bundles the oracle drivers and the necessary libraries. can you check if
your path is pointing to the right bin folder for the 817 libraries.
sree
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
Hi Christine
Can you do a dbping from the machine where you start the wls server?
java utils.dbping ORACLE scott tiger servicename(as in tnsnames.ora)
sree
"christine" <[email protected]> wrote in message
news:[email protected]...
Thank you for your quick reply, Sree. Unfortunately, both the clientversion of
oracle and the classes12.zip that ships with that version are correct.
In
addition,
the service name is in the tsnames.ora file.
What is puzzling is that we used this same connectionpool/datasource/oracle/weblogic
configuration when running weblogic 6.0sp1 with no errors. The only
thing
that
has changed in our configuration is that we upgraded to weblogic 6.1.
Any other thoughts?
Thanks again in advance!
-Christine
"Sree Bodapati" <[email protected]> wrote:
Make sure you are using proper client version of the oracle client
software.
And the classes12.zip that ships that version.
And most importantly make sure you have the service name , in the
tnsnames.ora file in the oracle client folder <oracalhome>/network/admin.
hth
sree
"christine" <[email protected]> wrote in message
news:[email protected]...
Hello,I am getting the error listed when starting my weblogic serverafter
creating a connection pool and datasource through the weblogic (6.1)
console. I am currently using the jDriver 5.1.0 oracle kit. I used
this
kit previously with the WLS6.0sp1 installation and had no errors.Any
suggestions? Thanks in advance!-Christine--***** BEGIN
ERROR*******Starting Loading jDriver/Oracle .....-------- LOGIN
ERROR
CODE: 24327---------- LOGIN ERROR CODE: 24327<Aug 17, 2001 1:40:22 PM
EDT>
<Error> <JDBC> <Cannot startup connection pool "ConnPool"
weblogic.common.ResourceException:Could not create pool connection. The
DBMS
driver exception was:java.sql.SQLException: ORA-24327: need explicit
attach
before authenticating a user - (user/********)--*****END ERROR******--

Error when Connect to Oracle using JSP

DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver()); There is no problem with this code in Java, but when i used it in JSP, the error occured.
java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
I am using JRUN Web Server, i don't know how to Configure JRUN to use JSP with Oracle.

the problem is that your JDBC driver is not in the classpath of your servlet. Add the jar file to the WEB-INF\lib folder of your web application.
i don't know how to Configure JRUNSorry, but in order to achieve anything, you'll have to RTFM.

Error using setTimestamp and ojdbc14 against Oracle 7.3.4

I am having a problem setting a timestamp value against Oracle 7.3.4 and Oracle 8.0.6 databases.
Here's the code:
public Tester
(String passedUsername, String passedPassword, String passedHostName, String passedPort, String passedSID)
throws SQLException {
// Establish a database connection
try {
Class.forName("oracle.jdbc.driver.OracleDriver");
} catch (ClassNotFoundException e) { throw new SQLException("Can't find class oracle.jdbc.driver.OracleDriver"); }
StringBuffer myStringBuffer = new StringBuffer(50);
myStringBuffer.append("jdbc:oracle:thin:@");
myStringBuffer.append(passedHostName);
myStringBuffer.append(":");
myStringBuffer.append(passedPort);
myStringBuffer.append(":");
myStringBuffer.append(passedSID);
Connection myConnection = DriverManager.getConnection(myStringBuffer.toString(), passedUsername, passedPassword);
myConnection.setAutoCommit(false);
// Insert the test record
PreparedStatement myPreparedStatement = null;
try {
myPreparedStatement = myConnection.prepareStatement("insert into test_table(date_field) values (?)");
myPreparedStatement.setTimestamp(1, new Timestamp(System.currentTimeMillis()));
myPreparedStatement.execute();
} finally {
if (myPreparedStatement != null) myPreparedStatement.close();
Here's the error that occurs under Oracle 7.3.4:
java.sql.SQLException: ORA-01024: invalid datatype in OCI call
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:573)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1891)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1093)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2047)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1940)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2709)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:589)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:656)
     at Tester.<init>(Tester.java:46)
     at Tester.main(Tester.java:62)
Here's the error that occurs under Oracle 8.0.6:
java.sql.SQLException: ORA-03115: unsupported network datatype or representation
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:573)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1891)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1093)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2047)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1940)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2709)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:589)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:656)
     at Tester.<init>(Tester.java:46)
     at Tester.main(Tester.java:62)
Note that the table in the insert statement does not have to exist. You can even replace the statement with a garbage statement.
The error is produced regardless.
The code is being compiled under JDK 1.4
I am using the latest version of the JDBC drivers (i.e. ojdbc14.jar)
The code works fine under Oracle 8.1.7 and 9.0.1
My code needs to access all four of these database version, sometimes concurrently, so I can only use a single driver class (i.e. I can't swap out ojdbc14.jar for classes12.zip).
Any feedback would be appreciated!

Hi,
Only to say that we have the same problem like you:
- Error ORA-01024 when connection to Oracle 8.0.1 on Sun Solaris
- Error ORA-03115 when connection to Oracle 8.1.5 on Windows
We are thinking about upgrading Oracle. Is it the only solution?
Thank you

If use MSSQ , when oracle rac node reboot, client get TPEOS error

Hi, all
in my tuxedo applicaton, if we use Single Server, Single Queue mode , when reboot any Oracle RAC node, our application is ok, client can get correct result. but if we use MSSQ（Multi Server, Single Queue) , if Oracle RAC node is ok , our application also is ok. but if we reboot any Oracle RAC node, client program can continue run, get correct result, but always get TPEOS error , for this situation， server can get client request, but client can not get server reply, only get TPEOS error.
our enviroment is :
oracle RAC ,10g 10.2.0.4 , two instances ,rac1 rac2, and two DTP services s1 and s2, set s1 and s2 services TAF is basic
tuxedo 10R3 , two nodes ,work in MP model ，use XA access oracle rac database，services have Transaction and not Transaction
OS is linux AS4 U5, 64bits
service program use OCI
can any one encounter this problem ?

Hi, first thanks you
in ULOG file , only have failover information, not any other error message, in client side also has no other error.
not use MSSQ, ubb file about MSSQ config
SERVERS
DEFAULT:
CLOPT="-A "
sinUpdate_server SRVGRP=GROUP11 SRVID=80 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinUpdate_server SRVGRP=GROUP12 SRVID=160 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinCount_server SRVGRP=GROUP11 SRVID=240 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinCount_server SRVGRP=GROUP12 SRVID=320 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinSelect_server SRVGRP=GROUP11 SRVID=360 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinSelect_server SRVGRP=GROUP12 SRVID=400 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinInsert_server SRVGRP=GROUP11 SRVID=520 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinInsert_server SRVGRP=GROUP12 SRVID=560 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDelete_server SRVGRP=GROUP11 SRVID=600 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDelete_server SRVGRP=GROUP12 SRVID=640 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDdl_server SRVGRP=GROUP11 SRVID=700 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDdl_server SRVGRP=GROUP12 SRVID=740 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
lockselect_server SRVGRP=GROUP11 SRVID=800 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
lockselect_server SRVGRP=GROUP12 SRVID=840 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
#mulup_server SRVGRP=GROUP11 SRVID=1 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
#mulup_server SRVGRP=GROUP12 SRVID=60 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinUpdate_server SRVGRP=GROUP13 SRVID=83 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinUpdate_server SRVGRP=GROUP14 SRVID=164 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinCount_server SRVGRP=GROUP13 SRVID=243 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinCount_server SRVGRP=GROUP14 SRVID=324 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinSelect_server SRVGRP=GROUP13 SRVID=363 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinSelect_server SRVGRP=GROUP14 SRVID=404 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinInsert_server SRVGRP=GROUP13 SRVID=523 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinInsert_server SRVGRP=GROUP14 SRVID=564 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDelete_server SRVGRP=GROUP13 SRVID=603 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDelete_server SRVGRP=GROUP14 SRVID=644 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDdl_server SRVGRP=GROUP13 SRVID=703 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDdl_server SRVGRP=GROUP14 SRVID=744 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
lockselect_server SRVGRP=GROUP13 SRVID=803 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
lockselect_server SRVGRP=GROUP14 SRVID=844 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
#mulup_server SRVGRP=GROUP13 SRVID=13 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
#mulup_server SRVGRP=GROUP14 SRVID=64 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
WSL SRVGRP=GROUP11 SRVID=1000
CLOPT="-A -- -n//120.3.8.237:7200 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP12 SRVID=1001
CLOPT="-A -- -n//120.3.8.238:7200 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP13 SRVID=1003
CLOPT="-A -- -n//120.3.8.237:7203 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP14 SRVID=1004
CLOPT="-A -- -n//120.3.8.238:7204 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
if we use MSSQ ,ubb file about MSSQ config is
*SERVERS
DEFAULT:
CLOPT="-A -p 1,60:1,30"
sinUpdate_server SRVGRP=GROUP11 SRVID=80 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinUpdate11 REPLYQ=Y
sinUpdate_server SRVGRP=GROUP12 SRVID=160 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinUpdate12 REPLYQ=Y
sinCount_server SRVGRP=GROUP11 SRVID=240 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinCount11 REPLYQ=Y
sinCount_server SRVGRP=GROUP12 SRVID=320 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinCount12 REPLYQ=Y
sinSelect_server SRVGRP=GROUP11 SRVID=360 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinSelec11 REPLYQ=Y
sinSelect_server SRVGRP=GROUP12 SRVID=400 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinSelect12 REPLYQ=Y
sinInsert_server SRVGRP=GROUP11 SRVID=520 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinInsert11 REPLYQ=Y
sinInsert_server SRVGRP=GROUP12 SRVID=560 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinInsert12 REPLYQ=Y
sinDelete_server SRVGRP=GROUP11 SRVID=600 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDelete11 REPLYQ=Y
sinDelete_server SRVGRP=GROUP12 SRVID=640 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDelete12 REPLYQ=Y
sinDdl_server SRVGRP=GROUP11 SRVID=700 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDdl11 REPLYQ=Y
sinDdl_server SRVGRP=GROUP12 SRVID=740 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDdl12 REPLYQ=Y
lockselect_server SRVGRP=GROUP11 SRVID=800 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=lockselect11 REPLYQ=Y
lockselect_server SRVGRP=GROUP12 SRVID=840 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=lockselect12 REPLYQ=Y
#mulup_server SRVGRP=GROUP11 SRVID=1 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=mulup11 REPLYQ=Y
#mulup_server SRVGRP=GROUP12 SRVID=60 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=mulup12 REPLYQ=Y
sinUpdate_server SRVGRP=GROUP13 SRVID=83 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinUpdate13 REPLYQ=Y
sinUpdate_server SRVGRP=GROUP14 SRVID=164 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinUpdate14 REPLYQ=Y
sinCount_server SRVGRP=GROUP13 SRVID=243 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinCount13 REPLYQ=Y
sinCount_server SRVGRP=GROUP14 SRVID=324 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinCount14 REPLYQ=Y
sinSelect_server SRVGRP=GROUP13 SRVID=363 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinSelec13 REPLYQ=Y
sinSelect_server SRVGRP=GROUP14 SRVID=404 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinSelect14 REPLYQ=Y
sinInsert_server SRVGRP=GROUP13 SRVID=523 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinInsert13 REPLYQ=Y
sinInsert_server SRVGRP=GROUP14 SRVID=564 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinInsert14 REPLYQ=Y
sinDelete_server SRVGRP=GROUP13 SRVID=603 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDelete13 REPLYQ=Y
sinDelete_server SRVGRP=GROUP14 SRVID=644 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDelete14 REPLYQ=Y
sinDdl_server SRVGRP=GROUP13 SRVID=703 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDdl13 REPLYQ=Y
sinDdl_server SRVGRP=GROUP14 SRVID=744 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDdl14 REPLYQ=Y
lockselect_server SRVGRP=GROUP13 SRVID=803 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=lockselect13 REPLYQ=Y
lockselect_server SRVGRP=GROUP14 SRVID=844 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=lockselect14 REPLYQ=Y
#mulup_server SRVGRP=GROUP13 SRVID=13 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=mulup13 REPLYQ=Y
#mulup_server SRVGRP=GROUP14 SRVID=64 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=mulup14 REPLYQ=Y
WSL SRVGRP=GROUP11 SRVID=1000
CLOPT="-A -- -n//120.3.8.237:7200 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP12 SRVID=1001
CLOPT="-A -- -n//120.3.8.238:7200 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP13 SRVID=1003
CLOPT="-A -- -n//120.3.8.237:7203 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP14 SRVID=1004
CLOPT="-A -- -n//120.3.8.238:7204 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
about above ubb file ,has any error ? or not correct use MSSQ
look forward to you answer,thanks.

Error using Oracle Database Gateway for DRDA

Hello All,
We're encountering issues while trying to query a table using a db link to DB2 database.
We are running oracle 11g R1 on windows and we have DB2 installed on the box. We've installed database gateway for DRDA also on the same box. The gateway is running on a different home location within the same machine. But we get the following error while trying to query across the db link. Would be great if you can take a look and suggest appropriate changes.
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from UDB
Here's how we configured the gateway:
Listener:
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=DB2)
(ORACLE_HOME=E:\app\Oracle\product\11.1.0\db_1)
(PROGRAM=g4drsrv)
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=E:\app\Oracle\product\11.1.0\db_1)
(PROGRAM=extproc)
Tns:
dg4drda.idc.oracle.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xpone.idc.oracle.com)
(PORT = 1521))
(CONNECT_DATA =
(SID= DB2))
(HS=OK)
initDB2.ora
HS_COMMIT_POINT_STRENGTH=255
HS_NLS_DATE_FORMAT=YYYY-MM-DD
HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P1
HS_RPC_FETCH_REBLOCKING=off
HS_RPC_FETCH_SIZE=32767
HS_FDS_FETCH_ROWS=20
FDS_CLASS=DG4DRDA_DB2UDB
DRDA_CONNECT_PARM=xpone.idc.oracle.com:50000
DRDA_REMOTE_DB_NAME=SAMPLE
DRDA_PACKAGE_COLLID=ORA11
DRDA_PACKAGE_NAME=G2DRSQL
DRDA_PACKAGE_CONSTOKEN=A929B170D366FB00
DRDA_RECOVERY_USERID=ORADRDA
DRDA_RECOVERY_PASSWORD=ORADRDA
DRDA_ISOLATION_LEVEL=CS
DRDA_DISABLE_CALL=TRUE
DRDA_CODEPAGE_MAP=codepage.map
heres how we created the db link:
CREATE DATABASE LINK udb CONNECT TO ORACLE IDENTIFIED BY "welcome1" USING 'dg4drda.idc.oracle.com';
and this was the sql executed
select * from employee@udb;
Really appreciate your assistance.
Regards
Krishna

Hello Mike,
Here's the entire listener entry (I've changed the SID to DB2. Consequently I have also changed the SID in tns and gateway init under folder "11.1.0\tg_1\dg4drda\admin"
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = XPONE)(PORT = 1521))
SID_LIST_LISTENER=
     (SID_LIST=
          (SID_DESC=
               (SID_NAME=DB2)
               (ORACLE_HOME=E:\app\Oracle\product\11.1.0\db_1)
               (PROGRAM=g4drsrv)
          (SID_DESC=
               (SID_NAME=PLSExtProc)
               (ORACLE_HOME=E:\app\Oracle\product\11.1.0\db_1)
               (PROGRAM=extproc)
I've also added the necessary IP entry to my host file.
Here's the listener log. I've grabbed it for 2 consecutive attempts to bind the package.
<msg time='2010-02-11T11:11:25.562-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Trace information written to e:\app\oracle\diag\tnslsnr\xpone\listener\trace\ora_752_2136.trc
</txt>
</msg>
<msg time='2010-02-11T11:11:25.562-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2010-02-11T11:11:25.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>
</txt>
</msg>
<msg time='2010-02-11T11:11:25.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Started with pid=752
</txt>
</msg>
<msg time='2010-02-11T11:11:25.593-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
</txt>
</msg>
<msg time='2010-02-11T11:11:25.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=1521)))
</txt>
</msg>
<msg time='2010-02-11T11:11:28.031-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2010-02-11T11:11:28.062-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2010-02-11T11:11:29.546-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=8080))(Presentation=HTTP)(Session=RAW))
</txt>
</msg>
<msg time='2010-02-11T11:11:29.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:29 * service_register * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:45.015-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:44 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=E:\app\Oracle\product\11.1.0\db_1\bin\sqlplus.exe)(HOST=XPONE)(USER=Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1076)) * establish * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:47.500-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:47 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:49.890-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:49 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=E:\app\Oracle\product\11.1.0\db_1\bin\sqlplus.exe)(HOST=XPONE)(USER=Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1077)) * establish * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:53.500-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:53 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:54.343-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:54 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=E:\app\Oracle\product\11.1.0\db_1\bin\sqlplus.exe)(HOST=XPONE)(USER=Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1078)) * establish * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:56.515-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:56 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:12:02.531-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:02 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:12:11.546-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:11 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:12:13.140-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:13 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1080)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:12:13.156-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:12:13.390-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:13 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1081)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:12:13.437-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:12:35.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:35 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:13:41.718-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:13:41 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:14:11.765-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:14:11 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:14:14.781-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:14:14 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:14:23.796-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:14:23 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:15:53.843-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:15:53 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:16:11.875-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:16:11 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:16:26.890-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:16:26 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:17:35.921-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:17:35 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:17:37.546-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:17:37 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:17:42.203-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=8080))(Presentation=HTTP)(Session=RAW))
</txt>
</msg>
<msg time='2010-02-11T11:17:42.218-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:17:42 * service_died * orcl * 12537
</txt>
</msg>
<msg time='2010-02-11T11:17:54.265-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>System parameter file is E:\app\Oracle\product\11.1.0\db_1\network\admin\listener.ora
</txt>
</msg>
<msg time='2010-02-11T11:17:54.281-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Log messages written to e:\app\oracle\diag\tnslsnr\xpone\listener\alert\log.xml
</txt>
</msg>
<msg time='2010-02-11T11:17:54.281-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Trace information written to e:\app\oracle\diag\tnslsnr\xpone\listener\trace\ora_3060_3104.trc
</txt>
</msg>
<msg time='2010-02-11T11:17:54.281-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2010-02-11T11:17:54.296-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>
</txt>
</msg>
<msg time='2010-02-11T11:17:54.296-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Started with pid=3060
</txt>
</msg>
<msg time='2010-02-11T11:17:54.296-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
</txt>
</msg>
<msg time='2010-02-11T11:17:54.328-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=1521)))
</txt>
</msg>
<msg time='2010-02-11T11:17:56.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2010-02-11T11:17:56.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2010-02-11T11:18:06.562-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:06 * service_register * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:09.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:09 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:12.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:12 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:18.625-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:18 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:39.625-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=8080))(Presentation=HTTP)(Session=RAW))
</txt>
</msg>
<msg time='2010-02-11T11:18:39.625-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:39 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:42.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:42 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:48.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:48 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:19:00.687-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:00 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=E:\app\Oracle\product\11.1.0\db_1\bin\sqlplus.exe)(HOST=XPONE)(USER=Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1095)) * establish * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:19:03.625-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:03 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:19:17.140-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:17 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1096)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:17.171-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:17.265-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:17 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1097)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:17.296-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:20.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:20 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1098)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:20.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:20.671-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:20 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1099)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:20.703-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:21.640-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:21 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:19:23.015-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:22 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1100)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:23.046-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:23.156-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:23 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1101)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:23.187-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
And finally, the listener is starting from Oracle Home and I do not have any other Oracle products installed.
Thanks a billion for all your suggestions.
Regards
Krishna

Error while Exporting dump using Expdp

Hi Guru's
When i started to export schema by giving the following command
staging/********@XXXXX schemas=abcdirectory=DUMPDIR dumpfile=tnfhc_291210.dmp logfile=exp_tnfhc_291210.log schema is not exported successfully. it started to give the following error.
ORA-31694: master table "STAGING"."SYS_EXPORT_SCHEMA_10" failed to load/unload
ORA-19502: write error on file "/home/oracle/dumpdir/tnfhc_291210.dmp", blockno 263773 (blocksize=4096)
ORA-27072: File I/O error
Additional information: 4
Additional information: 263773
Additional information: 131072
Job "STAGING"."SYS_EXPORT_SCH
{code}
Kindly help to take backup..
Thanks & Regards
Sami.

ORA-19502: write error on file "/home/oracle/dumpdir/tnfhc_291210.dmp", blockno 263773 (blocksize=4096)
ORA-27072: File I/O error
Additional information: 4some sort of Operating System error; like volume is 100% full
what clues exist in OS log files?

How to use expdp and impdp in oracle 12c on a pluggable database

Hi,
I have a pluggable database in a container DB. I have to use expdp to export a table and later import the table into another pluggable database.
How can i tell expdp to which pluggable database I want to connect?
Thanks,
Sarayu

Then
1. Add newpdb to tnsnames.ora ?
2. connect to pluggable database create a directory.
sqlplus sys/<password>@newpdb as sysdba
create or replace directory exp_dir as '/u01/app';
grant read, write on directory exp_dir to scott;
3. export emp table of scott user. -- with sys user
expdp directory=exp_dir dumpfile=TDUMP.DMP TABLES='SCOTT'.'EMP'
username: sys@newpdb as sysdba
password: <password>
Regards
Mahir M. Quluzade
Paste here result.

Error using expdp on Oracle XE

Similar Messages

Maybe you are looking for