Error using iManager Setup DNS

I'm trying to setup DNS on our server using iManager. Under Small Business
Setup, Setup DNS and am getting this error
The DNS server object (host , domain fs1) failed to initialize. Error:
eDirectory Interaction Failure
Can't find anything in the KB. Can anybody help me?
Thanks,
Kim

Anders,
I apologies. I did see that TID and when I went to follow the Fix section,
everything was already setup. After you pointed it out again I re-read it
and noticed that I did not follow the Additionally paragraph under the
steps. Once I did that everything seems OK. Sorry about that. Guess I
need to try and start getting more sleep so I pay attention. :-)
Thanks for helping.
Kim
"Anders Gustafsson" <[email protected]> wrote in message
news:[email protected]..
> Cti,
>> eDirectory Interaction Failure
>> Can't find anything in the KB. Can anybody help me?
>>
> Odd.. This was the first hit for me when I searched for that error:
> http://www.novell.com/support/search...200%2035444313
>
> - Anders Gustafsson, Engineer, CNE6, ASE
> NSC Volunteer Sysop
> Pedago, The Aaland Islands (N60 E20)
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
> Using VA 5.51 build 315 on Windows 2000 build 2600
>

Similar Messages

TS3991 When I try to use Outlook Setup for the iCloud on my PC I get an error message at step 2 of 7 Download Calender from iCloud as follows: "your setup couldn't be started because of an unexpected error"

When I try to set up MS Outlook using Outlook Setup for Icloud it fails at step 2 of 7 Download Calender from iCloud with error message "your setup could not be started because of an unexpected error" My iCloud calender in Outlook had previously been working, but was not reflecting the same scheduling information, so I tried to delete it and reinstall using the Outlook Setup for iCloud.
How can I get it to work again?

Hello, ksb2.
Thank you for visiting Apple Support Communities.
We are investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Cheers,
Jason H.

HT1899 Is Boot Camp Assistant supported in Mac OS X 10.8.1? I am getting an error "Boot Camp Assistant cannot be used. You must update your computer's Boot ROM firmware before using this setup assistant."

Please advice I am getting an error "Boot Camp Assistant cannot be used. You must update your computer's Boot ROM firmware before using this setup assistant."

No I have only one physical HDD. Here is a diskutil list result
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.3 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.4 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
Also here is a system info
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
15-inch, Late 2011
current situation
- I've recovered from external drive (mountain lion 10.8.1 ) which i prepared by Lion Diskmaker before.
Current issues:
1) I have Recovery HD but when I boot from it - Reinstall Mac OS X option is not working
2) I have EFI password and won't be able to clear it as well as reset PRAM
3) Boot Camp Assistant is not working as well with the error in the subject
Any ideas how to fix all of these?

Getting an error message while launching bootcamp ""Boot Camp Assistant cannot be used: You must update your computer's boot ROM firmware before using this setup assistant".

Need Help how to address problem with undoing partition from BootCamp Assistant- receiving error message
"Boot Camp Assistant cannot be used: You must update your computer's boot ROM firmware before using this setup assistant".
attempted solutions:
http://support.apple.com/kb/HT3964?viewlocale=en_en
http://support.apple.com/kb/HT1379?viewlocale=en_en
Mac HD is already MAc os Extended(journaled)
***problem still persists with above solutions.

No I have only one physical HDD. Here is a diskutil list result
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.3 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.4 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
Also here is a system info
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
15-inch, Late 2011
current situation
- I've recovered from external drive (mountain lion 10.8.1 ) which i prepared by Lion Diskmaker before.
Current issues:
1) I have Recovery HD but when I boot from it - Reinstall Mac OS X option is not working
2) I have EFI password and won't be able to clear it as well as reset PRAM
3) Boot Camp Assistant is not working as well with the error in the subject
Any ideas how to fix all of these?

"Windows Setup could not configure Windows to run on this computer's hardware" error using MDT

Good day. I am using Microsoft Deployment Toolkit to deploy images to a group of ClearCube R3080D bladed PCs. Below are the server details:
VMware virtual server with Server 2008 R2 Enterprise Service Pack 1
Microsoft Deployment Workbench Version 6.1.2373.0
Management Console 3.0 Version 6.1(Build 7601: Service Pack 1)
Windows Deployment Services Version 6.1.7600.16385
The image I am deploying to the blades is that of Windows 7 Enterprise x64 Service Pack 1 with Office 2010 and a few other third-party applications.
I have pushed this image to literally hundreds of blades successfully. I had a problem with one blade and found that the HDD was faulty. I RMA’d that HDD and installed the replacement. I pushed the same image to the blade and it works fine to the very end
then I receive the error ”Windows Setup could not configure Windows to run on this computer’s hardware.”
I have checked the BIOS configurations on this blade and they are identical to those of several known good blades. In fact, I swapped HDDs between a known good blade and the blade in question. The problem seemed to follow the HDD. Therefore, I assumed that
ClearCube sent a faulty HDD. I had the identical problems with a second HDD from ClearCube so I’m sure that the HDD is fine.
I have read through http://support.microsoft.com/kb/2466753
as well as many other questions posed by other folks and I have yet to find a good solution.
Again, this image works on all other blades that are of the same model and the HDDs are also of the same model. I'm quite confused!
Tony

Tony?
What are you doing posting the same question 5 times, within 3 hours???
http://social.technet.microsoft.com/Forums/en-US/67f72721-da1b-42bc-b373-9064fe1a8245/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/9e7ca626-5b67-4a3f-ade0-4bac767e060f/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/8c508acc-ad40-4608-911c-fbfbc5e293fe/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdthttp://social.technet.microsoft.com/Forums/en-US/a8a98fce-0ddf-4a59-ba8a-9acab7de0c5e/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
If this post is helpful please click "Mark for answer", thanks! Kind regards

Yosemite Server: Apache shm errors with proxy_balancer | SASL errors using user alias

Dear OSX Server Ninjas,
I recently upgraded my 10.9.5 Mac mini running Server 3.2.2 to Yosemite + Server v4, directly to v4.0.3. The box serves the whole Mail/Cal/Contacts/VPN palette as well as some websites, Git repos and some custom software. See below for network setup.
After battling the most blatant issues (some easy to fix but hard to find, others hard on both), I'm almost back to a working server setup … but some things keep bugging me even after days of log-reading and OD tricks. In the last days, I have read countless discussions here as well as on stackoverflow/serverfault/apple.stackexchange and blogs, so I'll try to be as thorough and precise as possible to show what I have tried so far – sorry in advance for the long post
… and since you might not read to the bottom: Thanks in advance for any help, especially with the Apache problem!
My setup
OSX Server v4.0.3 running on Yosemite 10.10.1 ➞ both latest official releases
host + DNS
Hostname configured for public domain mydomain.net, web traffic on selected ports comes in through router NAT
Server has a static IP on the local subnet 192.168.178.0/24
Server running local DNS and performing lookups for all clients in the local subnet, forwarding to the router at 192.168.178.1
Primary zone for mydomain.net with records (A, NS, MX) pointing to said static IP
changeip -checkhostname is successful
Public IP is currently configured at the domain registrar through his name servers
SSL
Trusted third-party certificate installed for host.mydomain.net (Common Name + SAN for two subdomains)
Used to secure all services
Qualys SSL Test Grade B (capped due to OSX's openssl 0.9.x not being capable of TLS1.2 and Intermediate CA SHA-1 )
TLS working both inbound and outbound according to CheckTLS.com
OpenDirectory
Recreated after upgrade (probably not necessary, since issue persists), re-imported groups + users from WGM backup files
Only the server itself is bound to the directory, other devices just access services through network accounts (CRAM-MD5, MD5-Digest)
Problems
Apache shm errors: Apache fails to create slot memory when proxy module is enabled
As soon as I start a service which requires the Apache proxy_balancer module (e.g. Cal/Contacts, ProfileManager), this starts filling up my Apache's error log:
[Mon Jan 12 01:41:17.979882 2015] [proxy_balancer:emerg] [pid 2949] (28)No space left on device: AH01179: balancer slotmem_create failed for p26d9e669--1011640492
[Mon Jan 12 01:41:17.979894 2015] [:emerg] [pid 2949] AH00020: Configuration Failed, exiting
[Mon Jan 12 01:41:28.297127 2015] [slotmem_shm:error] [pid 3026] (28)No space left on device: AH02611: create: apr_shm_create(/private/var/run/slotmem-shm-p26d9e669--1001322955.shm) failed
[Mon Jan 12 01:41:28.297347 2015] [proxy_balancer:emerg] [pid 3026] (28)No space left on device: AH01179: balancer slotmem_create failed for p26d9e669--1001322955
[Mon Jan 12 01:41:28.297355 2015] [:emerg] [pid 3026] AH00020: Configuration Failed, exiting
When I increase the Apache LogLevel to trace1, I get this as well:
[Mon Jan 12 02:11:43.190303 2015] [slotmem_shm:debug] [pid 5501] mod_slotmem_shm.c(367): AH02602: create didn't find /private/var/run/slotmem-shm-p26d9e669-813569972.shm in global list
This causes the Apache to crash constantly, which is … unnerving. After googling around for a while, I tried the following steps:
Stop Services that use the Apache (Web, *DAV, ProfileManager)
sudo apachectl stop
Remove all orphan cache/slot files (.shm, ssl-cache, proxy.*) from /private/var/run
Reboot the server
Start up the Services again
Curiously enough, this worked for a while! But I was getting several log messages about dropped proxy connections, and sometimes the ProfileManager page would time out. Then, the issue started to reappear and does not seem to be fixed again with the steps above. I looked through the Apache config files and config plists for the Services in question, as well as the default config files. The only thing I have so far is that as long as there are no active proxy connections, the Apache runs smoothly – but all goes awry when slotmem files are created (a lot of them). Sometimes, I am able to turn on the Calendar service, but switching on Contacts produces the error … one time, I even got Calendar + Contacts running, and all went well until I enabled Profile Manager.
I found several error reports with similar or identical errors from other Apache 2.4.x users, but most of those were developer talk on mailing lists, or suggested steps that did not work for me (or were inapplicable on the OS X Server Apache environment).
SASL errors using user alias for WebDAV-Digest authentication
Short version: I am unable to authenticate through WebDAV-Digest with a user's alias (defined in Server Admin > Users > Context Menu > Advanced Options or WGM). Using the main short name of the same user works flawlessly. Password Server Error log just shows:
AUTH2: {234023578237md5hash2384234, mainshortname} WEBDAV-DIGEST authentication failed, SASL error -13 (password incorrect).
The password is 100% correct: When I set up a test CalDAV account and put in alias+PW, it did not work (OS X Dialog showed “could not be verified”, Server log as above). Leaving the password field filled and just switching the user to the main short name went through instantaneously, with the Server log showing
AUTH2: {234023578237md5hash2384234, mainshortname} WEBDAV-DIGEST authentication succeeded.
Notice the same MD5 hash and canonical short name, yet different results. I don't know if this is a new “feature”, a result of mail aliases being handled differently (at least I read that somewhere) …
Additional Questions
Should I configure the DNS for public use, instead of the Split-Brain configuration (local network gets local IP, outside traffic is directed by registrar NS)? I read several articles explaining that Split-Brain is common in large organizations, but might introduce weird networking issues. Entering the external IP as a Round Robin alternative for the internal does not seem sensible to me.
I also have a question concerning LDAP log entries like this one below, but I'll put that in this already open discussion:
=> bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)

Today the same error occurred on a customers server.
We don't use Calendar or Contacts.
We only have some websites configured and want use NetInstall for deployments.
As soon as I disable the Profilemanager the httpd starts over and other websites and NetInstall via HTTP are working fine.
When I reenable Profilemanager the httpd processes are gone and I see the same stuff in Apache's error log...

Setup DNS in Snow Leopard HELP!!!!!!!

I would like to have step by step instructions on setting up DNS in Snow Leopard.
Now I can setup DNS in Leopard Server with my eye's closed, but SLS is giving me
trouble.
The only service I have running at present is DNS.
The problem is SLS what to enter in the nameservers zone field.
I am using readsrv for the server name, when setup asks for a dns name I entered macbook.com
So the final FQDNS should read readsrv.macbook.com.
Also how does the Reverse DNS setup in SLS ???
Leopard Server would automatically create this field, but I do not see this in SLS DNS Settings.
I get this error in terminal.
macbook:~ sls$ sudo changeip -checkhostname
Primary address = 192.168.1.30
Current HostName = macbook.com
The DNS hostname is not available, please repair DNS and re-run this tool.
Thank you all in advance, please help me out.
Message was edited by: Mike Darland

Here, you'll want to get a registered domain or use something severely unlikely to get issued as a real domain (host.mikedarland or some other such domain), unless you're tied in with the folks that have the macbook.com domain registered. Folks are activating new top-level domains (TLDs) like .travel. I'll refer to the domain and the zone example.com here, as this is an RFC-preferred domain name for (duh) an example domain.
Get a good and restorable backup of your disk before you start.
Launch Server Admin.
Select the target server, select DNS, stop DNS.
Select Settings.
Select the forwarding server(s) as your upstream ISP DNS server(s).
Select Zones.
Clean out all of the zones you see there.
Add a forward primary zone for example.com. (note that trailing dot), and select the DNS server for that zone as 192.168.1.30 or whatever the address of your host. (And as an aside, I'd get out of 192.168.0.0/16 just as soon as I could manage it, as that messes up VPN routing if/when you get there.)
You'll get a reverse zone created gratis.
Add an A record for hostnames; here using "hostname".
For testing: aim one of your clients at the DNS server at 192.168.1.30 (or whatever the IP address) via explicit selection in Network Preferences or such. Aim dig hostname.example.com, and (presuming that kicks back an address), aim a dig -x w.y.y.z query to test the reverse translation.
After you have it all working, aim your clients at the box via explicit specification for via DHCP setting. Do not reference the ISP settings directly.

Error while filling setup table for Sales

Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SG

Hi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ

Domain Registrar's for use with own DNS?

Hi Everyone,
We have a DNS server on-site and want to use it to host our own records. We have setup the necessary zones etc. Local requests work well, (our website is hosted on-site by a separate dedicated IIS server). When users connected to our LAN go to 'harrodsschool.co.uk'
they are taken to the website as per expected, but the website can't be accessed from outside. We need to forward DNS requests to our server. We have not yet registered a domain with anybody, the only DNS registrars I know of, only allow you to use their
managed DNS services. Are there any that will redirect requests to our server for us?
Thanks,
Rowan

Hi Rowan,
If we want to resolve our domain name through internet, we need to purchase a domain name.
After we purchase the domain name, we need to point a NS record to your DNS server.
For detailed information, please consult with your ISP.
Best Regards.
Steven Lee
TechNet Community Support

Use of Public DNS Server

I have an iMac, Mac Mini and a Macbook Pro connected to a Airport Extreme Base Station. I normally use a Public DNS Server and I am not sure where to put the DNS URLs. Do I put them on the individual computers or is there somewhere in the Airport Extreme Base Station that they go? where ever they belong please provide location and instructions. Thanks.

Configuring the AirPort Extreme with the DNS makes it so that you do not have to configure each individual computer on the WLAN, the DNS settings will be handed down to the devices when they are given their internal IPs, but as long as the base station does not have a competing/conflicting DNS setup, configuring each individual device, as suggested by Carolyn, works also.
However, something strange can happen sometimes when you use a public DNS setup. I use the one Carolyn suggests, OpenDNS, but I cannot access any of the webpages of my ISP with this configuration. I have Todo en Uno (All in One), a service that provides cable, telephone and internet service from my local cable company, CableVisión. So with the OpenDNS setup I cannot configure the digital options for my telephone service, such as blocking and unblocking Int'l long Distance calls. I have to remove the OpenDNS setting to do so. But I created a work around using Locations in the Network settings. I have one Location with my ISP's DNS settings and another Location with OpenDNS settings. I can quickly switch between the two when I need to access my ISP's website.
Dah•veed

I have this error trying to setup the environment : ORA-32101

i have this error trying to setup the environment :
the execution :
[]-pedro:/home/pedro/modelo_v4>./occiteste
inicio do programa
antes do env _environment
Can’t set the environment: Error while trying to retrieve text for error ORA-32101
[]-pedro:/home/pedro/modelo_v4>
here is a piece of the code :
Model.h
#pragma once
#include <iostream>
#include <stdlib.h>
#include <stdio.h>
#include <ctype.h>
#include <string>
#include <occi.h>
using namespace oracle::occi;
using namespace std;
private:
int ret;
Environment* env;
Model .cpp
Modelo::Modelo(void)
try
env = Environment::createEnvironment(Environment::DEFAULT);
catch (SQLException ea)
cerr << "Error : " << ea.what();
ret = 1;
[]-pedro:/home/pedro/modelo_v3>ldd occiteste
libocci.so.10.1 => /opt/users/ora10g/lib/libocci.so.10.1
libclntsh.so.10.1 => /opt/users/ora10g/lib/libclntsh.so.10.1
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libstd_v2.so.1 => /usr/lib/hpux64/libstd_v2.so.1
libCsup.so.1 => /usr/lib/hpux64/libCsup.so.1
libc.so.1 => /usr/lib/hpux64/libc.so.1
libnnz10.so => /opt/users/ora10g/lib/libnnz10.so
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libuca.so.1 => /usr/lib/hpux64/libuca.so.1
[]-pedro:/home/pedro/modelo_v3>
thanks

yes , the OBJECT gives the same result
the platform is HP-UX 64 bits :
/opt/aCC/bin/aCC DD64    -AA -DOCCI_NO_WSTRING=1 DD64 -D_RWSTD_MULTI_THREAD -I/opt/users/ora10g/rdbms/demo -I/opt/users/ora10g/rdbms/public -I/opt/users/ora10g/plsql/public -I/opt/users/ora10g/network/public -DHPUX -D_REENTRANT -DHPUX_KTHREAD -DSLXMX_ENABLE -DSLTS_ENABLE -DSS_64BIT_SERVER -DBIT64 -DMACHINE64 -DORAIA64 -DHPUX_IA64 -c Main_Program.cpp
/opt/aCC/bin/aCC DD64    -AA -DOCCI_NO_WSTRING=1 DD64 -D_RWSTD_MULTI_THREAD -I/opt/users/ora10g/rdbms/demo -I/opt/users/ora10g/rdbms/public -I/opt/users/ora10g/plsql/public -I/opt/users/ora10g/network/public -DHPUX -D_REENTRANT -DHPUX_KTHREAD -DSLXMX_ENABLE -DSLTS_ENABLE -DSS_64BIT_SERVER -DBIT64 -DMACHINE64 -DORAIA64 -DHPUX_IA64 -c Modelo.cpp
/opt/aCC/bin/aCC +DD64 -o occiteste Main_Program.o Modelo.o -L/opt/users/ora10g/lib -locci -lclntsh   `cat /opt/users/ora10g/lib/sysliblist` -lm
[]-pedro:/home/pedro/modelo_v4>ls -la
DEFAULT is used for creating an Environment object; it has no thread safety or object support.
OBJECT is for creating an Environment object; it uses object features.
SHARED is for creating an Environment object.
NO_USERCALLBACKS is for creating an Environment object; it does not support user callbacks.
THREADED_MUTEXED is a thread safe mode for creating an Environment object, mutexed internally by OCCI.
THREADED_UNMUTEXED is a thread safe mode for creating an Environment object; the client is responsible for mutexing.
EVENTS supports registration for event notification used in Oracle Streams Advanced Queuing.
USE_LDAP supports registration with LDAP.

Install Adobe Premiere Elements 10 using the setup.exe in the root folder

I am trying to make an SCCM install package for PremiereElements_10_LS15_win64. I am following the directions I found here http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html and I am using a Win7 SP1 machine with a new NT profile that does have admin rights. The error I receive is, "Install Adobe Premiere Elements 10 using the setup.exe in the root folder."
Also, when I try to use AAMEE 2.1 I am told that when I use the containing the setup.exe and the .msi that "A valid installer could not be found."

Hi Chris,
First of all, you will not be able to package PSE 10 using AAMEE. It needs to be packaged only using the xml method, that you tried and got the error.
So, here is want i want you to try.
> Take a Win 7 machine with a fresh OS installation.
> Follow the above article that you have properly i.e. create the application.xml.override.
> Test the xml package by running the command mentioned under step 2 using the command prompt.
Check if that works.

Error 1406. Setup cannot write the value mlcfg32.cpl

Hi to all. I am attempting to upgrade Office 2007 Standard to Office 2013 Pro. I have used the OCT tool to create a custom MSP. On some machine the upgrade fails. It is always the same error (see below).
[quote]
Error 1406. Setup cannot write the value mlcfg32.cpl to the registry key \Software\Microsoft\Windows\CurrentVersion\Control Panel\Cpls. Verify that you have
sufficient permissions to access the registry or contact microsoft product services (PPS) for assistance. For information about how to contact PSS, see
C:\Users\......
[/quote]
I have attempted the following:
1.Log on to the computer by using an Administrator user account.
2.Start Microsoft Windows Explorer.
3.On the Organize menu, click Folder and search options.
4.Click the View tab.
5.Under Hidden files and folders, click Show hidden files, folders, and drives.
6.Click to clear the Hide extensions for known file types check box.
7.Click to clear the Hide protected operating system file (Recommended) check box, and then click OK.
8.On the Warning dialog box, click Yes.
9.Open the following folder: C:\Users\All Users\Microsoft\Office\Data\
10.If you are running Office 2007, right-click Opa12.dat or if you are running Office 2003, right-click Data.dat, and then click Properties.
11.Click the Security tab.
12.Click Advanced.
13.Click the Permissions tab.
14.Click to select Everyone in the Permission entries list, and then click Edit.
15.Click to select the Full Control check box.
16.Click OK four times. If these steps do not resolve this issue, delete the Opa12.dat, the Opa11.dat file or the Data.dat file from the following folder, and then restart an Office 2007 program, an Office 2003 program or an Office XP program
C:\Users\All Users\Microsoft\Office\Data
Has anyone seen this issue previously?
Kind Regards,
Phil.

Hi Phil,
Thank you for your questions. Have you uninstalled Office 2007 from the machine before the Office 2013 installation?
I believe you've already seen this KB article before, the steps above are quoted from it:
http://support.microsoft.com/kb/838687
As can been seen from the article, the steps above are specific to Method 4. There are three other Methods mentioned in the article, have you ever tried them? If not yet, I would suggest you to have a try:
Method 1: Set the permission for the Everyone group of the registry subkeys that are listed in the error message to Full Control.
Method 2: Disable the third-party application.
Method 3: Try the installation again in
Let me know if the issue persists after the steps above, we'll take a further look then.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error during Performing Setup - SD Sales Orders...

Hi gurus,
I am getting an error while Performing Setup - SD Sales Orders by following the below steps from SAP best practices document for Sales Overview cube(0SD-C03).
In the Display IMG view choose Data Transfer to the SAP Business Information Warehouse à Settings for Application-Specific DataSources à Logistics à Managing Extract Structures à Initialization à Filling in the Setup Table  Application-Specific Setup of Statistical Data  SD-Sales Orders - Perform Setup.
ERROR MESSAGE IS: "Error determining rate: foreign curr. local curr.
USD date 11/06/2005(doc. 9153)"
Thanks.
Syed.
Note: This topic is marked as questions and will be rewarded with points.

hi Syed,
you can use transaction SNOTE,
and menu go to->sap note browser, find if that oss note is there. this note quite old (2001).
manually, you can check program LSCUNF01 (SE38),
and compare with following (for r/3 4.6a - 4.6d),
depend on your r/3 version.
please ask basis help.
FORM ABWCT_EXIST
Delta 001
Context Block
FORM abwct_exist USING loc_curr for_curr exc_date
                                         value(exc_type).
*------- DATC enthält das invertierte Datum -
CONVERT DATE exc_date INTO INVERTED-DATE datc.
Delete Block
Insert Block
*----- TCURV als erstes lesen, falls Invertierung aktiv -
IF tcurv-kurst NE exc_type OR tcurv-mandt NE mandt.
    SELECT SINGLE * FROM tcurv CLIENT SPECIFIED
           WHERE kurst       = exc_type
            AND   mandt       = mandt.
ENDIF.
Delta 002
Context Block
      ENDIF.
    ENDIF.
Alter Eintrag nicht verwendbar -
ELSE.
Delete Block
*----- TCURV als erstes lesen, falls Invertierung aktiv -
    IF tcurv-kurst NE exc_type OR tcurv-mandt NE mandt.
      SELECT SINGLE * FROM tcurv CLIENT SPECIFIED
             WHERE kurst       = exc_type
              AND   mandt       = mandt.
    ENDIF.
Insert Block

Error using eclipse from oepe with weblogic 12.1

I have written a very simple jsp and have tried to run it on the eclipse. I cannot start the server as it says jdk1.7_0_9 is unexpected. I have used the new server wizard, i believe, correctly and have tried to the path to java-home without spaces.
Can anybody help?
quick note:
this is how my setDomainEnv looks like:
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
@REM *************************************************************************
@REM This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
@REM
@REM This script initializes the following variables before calling commEnv to set other variables:
@REM
@REM WL_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
@REM this script to switch between Sun or BEA or just have the default be set.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server. Depends directly on which JAVA_VM value is set by default or by the environment.
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DOMAIN_PRODUCTION_MODE
@REM - The variable that determines whether the workshop related settings like the debugger,
@REM testconsole or iterativedev should be enabled. ONLY settable using the
@REM command-line parameter named production
@REM NOTE: Specifying the production command-line param will force
@REM the server to start in production mode.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E24329_01/web.1211/e21048/overview.htm).
@REM *************************************************************************
set WL_HOME=C:\Oracle\Middleware\wlserver_12.1
for %%i in ("%WL_HOME%") do set WL_HOME=%%~fsi
set BEA_JAVA_HOME=C:\Progra~2\jdk1.7.0_09
set SUN_JAVA_HOME=C:\Progra~2\jdk1.7.0_09
if "%JAVA_VENDOR%"=="Oracle" (
     set JAVA_HOME=%BEA_JAVA_HOME%
) else (
     if "%JAVA_VENDOR%"=="Sun" (
          set JAVA_HOME=%SUN_JAVA_HOME%
     ) else (
          set JAVA_VENDOR=Sun
          set JAVA_HOME=C:\Program Files (x86)\Java\jdk1.7.0_09
@REM We need to reset the value of JAVA_HOME to get it shortened AND
@REM we can not shorten it above because immediate variable expansion will blank it
set JAVA_HOME=%JAVA_HOME%
for %%i in ("%JAVA_HOME%") do set JAVA_HOME=%%~fsi
set SAMPLES_HOME=%WL_HOME%\samples
set DOMAIN_HOME=C:\Oracle\Middleware\wlserver_12.1\samples\domains\wl_server
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
set LONG_DOMAIN_HOME=C:\Oracle\Middleware\wlserver_12.1\samples\domains\wl_server
if "%DEBUG_PORT%"=="" (
     set DEBUG_PORT=8453
if "%SERVER_NAME%"=="" (
     set SERVER_NAME=examplesServer
set DERBY_FLAG=true
set enableHotswapFlag=
set PRODUCTION_MODE=
set doExitFlag=false
set verboseLoggingFlag=false
for %%p in (%*) do call :SET_PARAM %%p
GOTO :CMD_LINE_DONE
     :SET_PARAM
     for %%q in (%1) do set noQuotesParam=%%~q
     if /i "%noQuotesParam%" == "nodebug" (
          set debugFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "production" (
          set DOMAIN_PRODUCTION_MODE=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "notestconsole" (
          set testConsoleFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "noiterativedev" (
          set iterativeDevFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "noLogErrorsToConsole" (
          set logErrorsToConsoleFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "noderby" (
          set DERBY_FLAG=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "doExit" (
          set doExitFlag=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "noExit" (
          set doExitFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "verbose" (
          set verboseLoggingFlag=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "enableHotswap" (
          set enableHotswapFlag=-javaagent:%WL_HOME%\server\lib\diagnostics-agent.jar
          GOTO :EOF
     ) else (
          set PROXY_SETTINGS=%PROXY_SETTINGS% %1
     GOTO :EOF
:CMD_LINE_DONE
set MEM_DEV_ARGS=
if "%DOMAIN_PRODUCTION_MODE%"=="true" (
     set PRODUCTION_MODE=%DOMAIN_PRODUCTION_MODE%
if "%PRODUCTION_MODE%"=="true" (
     set debugFlag=false
     set testConsoleFlag=false
     set iterativeDevFlag=false
     set logErrorsToConsoleFlag=false
@REM If you want to override the default Patch Classpath, Library Path and Path for this domain,
@REM Please uncomment the following lines and add a valid value for the environment variables
@REM set PATCH_CLASSPATH=[myPatchClasspath] (windows)
@REM set PATCH_LIBPATH=[myPatchLibpath] (windows)
@REM set PATCH_PATH=[myPatchPath] (windows)
@REM PATCH_CLASSPATH=[myPatchClasspath] (unix)
@REM PATCH_LIBPATH=[myPatchLibpath] (unix)
@REM PATCH_PATH=[myPatchPath] (unix)
call "%WL_HOME%\common\bin\commEnv.cmd"
set WLS_HOME=%WL_HOME%\server
if "%JAVA_VENDOR%"=="Sun" (
     set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx512m
     set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx512m
) else (
     set WLS_MEM_ARGS_64BIT=-Xms512m -Xmx512m
     set WLS_MEM_ARGS_32BIT=-Xms512m -Xmx512m
set MEM_ARGS_64BIT=%WLS_MEM_ARGS_64BIT%
set MEM_ARGS_32BIT=%WLS_MEM_ARGS_32BIT%
if "%JAVA_USE_64BIT%"=="true" (
     set MEM_ARGS=%MEM_ARGS_64BIT%
) else (
     set MEM_ARGS=%MEM_ARGS_32BIT%
set MEM_PERM_SIZE_64BIT=-XX:PermSize=128m
set MEM_PERM_SIZE_32BIT=-XX:PermSize=128m
if "%JAVA_USE_64BIT%"=="true" (
     set MEM_PERM_SIZE=%MEM_PERM_SIZE_64BIT%
) else (
     set MEM_PERM_SIZE=%MEM_PERM_SIZE_32BIT%
set MEM_MAX_PERM_SIZE_64BIT=-XX:MaxPermSize=256m
set MEM_MAX_PERM_SIZE_32BIT=-XX:MaxPermSize=256m
if "%JAVA_USE_64BIT%"=="true" (
     set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_64BIT%
) else (
     set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_32BIT%
if "%JAVA_VENDOR%"=="Sun" (
     if "%PRODUCTION_MODE%"=="" (
          set MEM_DEV_ARGS=-XX:CompileThreshold=8000 %MEM_PERM_SIZE%
@REM Had to have a separate test here BECAUSE of immediate variable expansion on windows
if "%JAVA_VENDOR%"=="Sun" (
     set MEM_ARGS=%MEM_ARGS% %MEM_DEV_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="HP" (
     set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="Apple" (
     set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
@REM IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
if NOT "%USER_MEM_ARGS%"=="" (
     set MEM_ARGS=%USER_MEM_ARGS%
set JAVA_PROPERTIES=-Dplatform.home=%WL_HOME% -Dwls.home=%WLS_HOME% -Dweblogic.home=%WLS_HOME%
@REM To use Java Authorization Contract for Containers (JACC) in this domain,
@REM please uncomment the following section. If there are multiple machines in
@REM your domain, be sure to edit the setDomainEnv in the associated domain on
@REM each machine.
@REM
@REM -Djava.security.manager
@REM -Djava.security.policy=location of weblogic.policy
@REM -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
@REM -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
@REM -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %EXTRA_JAVA_PROPERTIES%
set ARDIR=%WL_HOME%\server\lib
pushd %LONG_DOMAIN_HOME%
@REM Clustering support (edit for your cluster!)
if "%ADMIN_URL%"=="" (
     @REM The then part of this block is telling us we are either starting an admin server OR we are non-clustered
     set CLUSTER_PROPERTIES=-Dweblogic.management.discover=true
) else (
     set CLUSTER_PROPERTIES=-Dweblogic.management.discover=false -Dweblogic.management.server=%ADMIN_URL%
if NOT "%LOG4J_CONFIG_FILE%"=="" (
     set JAVA_PROPERTIES=%JAVA_PROPERTIES% -Dlog4j.configuration=file:%LOG4J_CONFIG_FILE%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %CLUSTER_PROPERTIES%
set PRE_CLASSPATH=C:\Oracle\Middleware\wlserver_12.1\samples\server\examples\build\serverclasses
set JAVA_DEBUG=
if "%debugFlag%"=="true" (
     set JAVA_DEBUG=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE
     set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole...
) else (
     set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -da
if NOT exist %JAVA_HOME%\lib (
     echo The JRE was not found in directory %JAVA_HOME%. ^(JAVA_HOME^)
     echo Please edit your environment and set the JAVA_HOME
     echo variable to point to the root directory of your Java installation.
     popd
     pause
     GOTO :EOF
if "%DERBY_FLAG%"=="true" (
     set DATABASE_CLASSPATH=%DERBY_CLASSPATH%
) else (
     set DATABASE_CLASSPATH=%DERBY_CLIENT_CLASSPATH%
if NOT "%DATABASE_CLASSPATH%"=="" (
     if NOT "%POST_CLASSPATH%"=="" (
          set POST_CLASSPATH=%POST_CLASSPATH%;%DATABASE_CLASSPATH%
     ) else (
          set POST_CLASSPATH=%DATABASE_CLASSPATH%
if NOT "%ARDIR%"=="" (
     if NOT "%POST_CLASSPATH%"=="" (
          set POST_CLASSPATH=%POST_CLASSPATH%;%ARDIR%\xqrl.jar
     ) else (
          set POST_CLASSPATH=%ARDIR%\xqrl.jar
@REM PROFILING SUPPORT
set JAVA_PROFILE=
set SERVER_CLASS=weblogic.Server
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %WLP_JAVA_PROPERTIES%
set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -Dwlw.iterativeDev=%iterativeDevFlag% -Dwlw.testConsole=%testConsoleFlag% -Dwlw.logErrorsToConsole=%logErrorsToConsoleFlag%
if "%PRODUCTION_MODE%"=="true" (
     set JAVA_OPTIONS= -Dweblogic.ProductionModeEnabled=true %JAVA_OPTIONS%
@REM -- Setup properties so that we can save stdout and stderr to files
if NOT "%WLS_STDOUT_LOG%"=="" (
     echo Logging WLS stdout to %WLS_STDOUT_LOG%
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stdout=%WLS_STDOUT_LOG%
if NOT "%WLS_STDERR_LOG%"=="" (
     echo Logging WLS stderr to %WLS_STDERR_LOG%
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stderr=%WLS_STDERR_LOG%
@REM ADD EXTENSIONS TO CLASSPATHS
if NOT "%EXT_PRE_CLASSPATH%"=="" (
     if NOT "%PRE_CLASSPATH%"=="" (
          set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%;%PRE_CLASSPATH%
     ) else (
          set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%
if NOT "%EXT_POST_CLASSPATH%"=="" (
     if NOT "%POST_CLASSPATH%"=="" (
          set POST_CLASSPATH=%POST_CLASSPATH%;%EXT_POST_CLASSPATH%
     ) else (
          set POST_CLASSPATH=%EXT_POST_CLASSPATH%
if NOT "%WEBLOGIC_EXTENSION_DIRS%"=="" (
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.ext.dirs=%WEBLOGIC_EXTENSION_DIRS%
set JAVA_OPTIONS=%JAVA_OPTIONS%
@REM SET THE CLASSPATH
if NOT "%WLP_POST_CLASSPATH%"=="" (
     if NOT "%CLASSPATH%"=="" (
          set CLASSPATH=%WLP_POST_CLASSPATH%;%CLASSPATH%
     ) else (
          set CLASSPATH=%WLP_POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
     if NOT "%CLASSPATH%"=="" (
          set CLASSPATH=%POST_CLASSPATH%;%CLASSPATH%
     ) else (
          set CLASSPATH=%POST_CLASSPATH%
if NOT "%WEBLOGIC_CLASSPATH%"=="" (
     if NOT "%CLASSPATH%"=="" (
          set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
     ) else (
          set CLASSPATH=%WEBLOGIC_CLASSPATH%
if NOT "%PRE_CLASSPATH%"=="" (
     set CLASSPATH=%PRE_CLASSPATH%;%CLASSPATH%
if NOT "%JAVA_VENDOR%"=="BEA" (
     set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
) else (
     set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
and this is hom my startWebLogic looks like:
@REM --- Start Functions ---
GOTO :ENDFUNCTIONS
:stopAll
     @REM We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
     if NOT "X%ALREADY_STOPPED%"=="X" (
          GOTO :EOF
     @REM STOP DERBY (only if we started it)
     if "%DERBY_FLAG%"=="true" (
          echo Stopping Derby server...
          call "%WL_HOME%\common\derby\bin\stopNetworkServer.cmd" >"%DOMAIN_HOME%\derbyShutdown.log" 2>&1
          echo Derby server stopped.
     set ALREADY_STOPPED=true
GOTO :EOF
:classCaching
     echo Class caching enabled...
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dlaunch.main.class=%SERVER_CLASS% -Dlaunch.class.path="%CLASSPATH%" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp %WL_HOME%\server\lib\pcl2.jar
     set SERVER_CLASS=com.oracle.classloader.launch.Launcher
GOTO :EOF
:ENDFUNCTIONS
@REM --- End Functions ---
@REM *************************************************************************
@REM This script is used to start WebLogic Server for this domain.
@REM
@REM To create your own start script for your domain, you can initialize the
@REM environment by calling @USERDOMAINHOME\setDomainEnv.
@REM
@REM setDomainEnv initializes or calls commEnv to initialize the following variables:
@REM
@REM BEA_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server.
@REM JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
@REM PATH - JDK and WebLogic directories are added to system path.
@REM WEBLOGIC_CLASSPATH
@REM - Classpath needed to start WebLogic Server.
@REM PATCH_CLASSPATH - Classpath used for patches
@REM PATCH_LIBPATH - Library path used for patches
@REM PATCH_PATH - Path used for patches
@REM WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
@REM JAVA_VM - The java arg specifying the VM to run. (i.e.
@REM - server, -hotspot, etc.)
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DERBY_HOME - Derby home directory.
@REM DERBY_CLASSPATH
@REM - Classpath needed to start Derby.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM CLASS_CACHE - Enable class caching of system classpath.
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E24329_01/web.1211/e21048/overview.htm).
@REM *************************************************************************
@REM Call setDomainEnv here.
set DOMAIN_HOME=C:\Oracle\Middleware\wlserver_12.1\samples\domains\wl_server
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
set USER_MEM_ARGS=-Xms32m -Xmx200m -XX:MaxPermSize=350m
@REM Start Derby
set DERBY_DEBUG_LEVEL=0
if "%DERBY_FLAG%"=="true" (
     call "%WL_HOME%\common\derby\bin\startNetworkServer.cmd" >"%DOMAIN_HOME%\derby.log" 2>&1
set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS%
set SAVE_JAVA_OPTIONS=
set CLASSPATH=%SAVE_CLASSPATH%
set SAVE_CLASSPATH=
if "%PRODUCTION_MODE%"=="true" (
     set WLS_DISPLAY_MODE=Production
) else (
     set WLS_DISPLAY_MODE=Development
if NOT "%WLS_USER%"=="" (
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.username=%WLS_USER%
if NOT "%WLS_PW%"=="" (
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.password=%WLS_PW%
if NOT "%MEDREC_WEBLOGIC_CLASSPATH%"=="" (
     if NOT "%CLASSPATH%"=="" (
          set CLASSPATH=%CLASSPATH%;%MEDREC_WEBLOGIC_CLASSPATH%
     ) else (
          set CLASSPATH=%MEDREC_WEBLOGIC_CLASSPATH%
echo .
echo .
echo JAVA Memory arguments: %MEM_ARGS%
echo .
echo WLS Start Mode=%WLS_DISPLAY_MODE%
echo .
echo CLASSPATH=%CLASSPATH%
echo .
echo PATH=%PATH%
echo .
echo ***************************************************
echo * To start WebLogic Server, use a username and *
echo * password assigned to an admin-level user. For *
echo * server administration, use the WebLogic Server *
echo * console at http:\\hostname:port\console *
echo ***************************************************
@REM CLASS CACHING
if "%CLASS_CACHE%"=="true" (
     CALL :classCaching
@REM START WEBLOGIC
echo starting weblogic with Java version:
%JAVA_HOME%\bin\java %JAVA_VM% -version
if "%WLS_REDIRECT_LOG%"=="" (
     echo Starting WLS with line:
     echo %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
     %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
) else (
     echo Redirecting output from WLS window to %WLS_REDIRECT_LOG%
     %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS% >"%WLS_REDIRECT_LOG%" 2>&1
CALL :stopAll
popd
@REM Exit this script only if we have been told to exit.
if "%doExitFlag%"=="true" (
     exit
ENDLOCAL
please help!

How are you deploying - from an IDE, or weblogic.Deployer or the console...?
With console....
Have you opened an SR with Oracle?
Not yet. How to do it?

Error using iManager Setup DNS

Similar Messages

Maybe you are looking for