Error using Server 2008 SDK

I am getting the following error when attempting to generate and display a report via the java sdk:
This field name is not known. Details: errorKind Error in File {24EF9C46-F999-4426-B5A2-5B9435BD5235}.rpt: Error in formula fProdDetDesc: '{pCovCanDetbyAcct;1.ProdDetDesc}' This field name is not known. Details: errorKind
This error does not happen when I manually run the report on the Central Management Console or via Developer 2008.
Is there something in the report that the SDK does not support? Any help would be greatly appreciated.
Thanks
-Paul

Hey PaulMac,
Sorry I can't help, except in the "Misery loves company" department.  There was one article in the SAP KnowledgeBase, but it was referring to DB2, which doesn't apply in my case.
I have just seen the "errorKind" string in a message when trying to print/preview a CR 10 report running against a MAS 90 version 4.20 database.
Here is my message:
Error in formula <Record_Selection>. |'|'|The remaining text does not appear to be part of the formula. |Details: errorKind.

Similar Messages

  • Connecting 2 Different Cities using Server 2008 R2

    Dear Members....,
    we are using server 2008 r2 on our head office, as our company in expanding and the branch offices are opened at two another places. please guide me our future plans is as,,,,
    we are running server 2008 r2 on our head office, and we have opened two different branch offices one in the same city but 4 kilometer away from our head office and one branch office is in another city 300 kilometer away from our head office. our requirement
    is to connect both branch offices with head office. am i right that our requirements are as below......?
    ------a wan connection from our first branch office to head office.
    ------another wan connection from 2nd branch office to head office.
    both branch offices will join the domain in head office.
    Thankssssss
    Tahir Mehmood

    Hi,
    You can deploy the site-to-site VPN, then all your branch office can access your head office as in the head office.
    The related KB:
    Step-by-Step Guide for Setting Up a PPTP-based Site-to-Site VPN Connection in a Test Lab
    http://technet.microsoft.com/en-us/library/cc758271(WS.10).aspx
    The related thread:
    Windows Server 2012 Site-to-Site VPN
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/6087f1ef-0d88-47ba-9724-8ba6dfb91ff7/windows-server-2012-sitetosite-vpn
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Microsoft Report Viewer Redistributable 2008 setup encountered Error on Server 2008 R2 Enterprise

    Hi,               
    I need help Microsoft Report Viewer Redistributable 2008 setup encountered Error on Server 2008 R2 Enterprise.  I tried to install many time failed every
    time. Please advise how I fix this issue
    After click OK
    Here is the next error message

    This one might sort it.
    http://support.microsoft.com/kb/970652
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Oracle Patch 10.2.0.4 error - Windows Server 2008 x64

    Hello!
    Could you please give your comments if you have seen errors described below? It appeared during the Oracle Patch 10.2.0.4 installation in Windows Server 2008 x64.
    *************installActions2010-08-06_11-02-02PM.log******************
    Using paramFile: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.0
    Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
    All installer requirements met.
    The commandline for unzip:
    C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ../stage/Components/oracle.swd.jre/1.5.0.11.0/1/DataFiles/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
    The commandline for unzip:
    C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
    The commandline for unzip:
    C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui.core\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
    The number of files bootstrapped for the jre is 551.
    The number of files bootstrapped for the oui is 71.INFO: Environment Variables:
    INFO:      ORACLE_HOME =
    INFO:      PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Acronis\BackupAndRecovery\;H:\oracle\S50\102
    INFO:      CLASSPATH =
    INFO: Username:Administrator
    INFO: Install area Control created with access level 1
    INFO: Oracle Universal Installer version is 10.2.0.4.0
    INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
    INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
    INFO:
    *** Welcome Page***
    INFO: Initializing install inventory
    INFO: Setting up install inventory
    INFO:
    *** Specify Source Location Page***
    INFO: Initializing OUI Shiphome access setup
    INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
    INFO: fetch the file: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\stage/shiphomeinfo.properties
    INFO: Performing operation for OUI Shiphome access setup
    INFO:
    *** Select a Product to Install Page***
    INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.patchset.db, 10.2.0.4.0, >10.2.0.4.0, [ ][OH:2]'. Received the value from the default settings.
    INFO:
    *** Select Installation Type Page***
    INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
    INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom'. Received the value from the default settings.
    INFO: install properties filename: C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/oracle.patchset.db_Custom.properties
    INFO:
    *** Specify Home Details Page***
    INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'H:\oracle\S50\102'. Received the value from the UI page.
    INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'S50102'. Received the value from the UI page.
    INFO: Initializing OUI Oracle Home access setup
    INFO: Setting variable 'ORACLE_HOME' to 'H:\oracle\S50\102'. Received the value from the UI page.
    INFO: Loading shiphomepropertiesfrom C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/shiphomeproperties.xml
    INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
    INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rat_10.2.0.4.0' to 'H:\oracle\S50\102/oracle_prod'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr_10.2.7.1.0' to 'H:\oracle\S50\102/ccr'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.11.0' to 'H:\oracle\S50\102\jdk'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.4.0' to 'H:\oracle\S50\102\OPatch'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.5.0.11.0' to 'H:\oracle\S50\102\jre\1.5.0'. Received the value from the variable calculation.
    INFO: Performing operation for OUI Oracle Home access setup
    INFO: SRVM ClusterInfo.IsLocalOnly() called. Return value obtained is 'false'.
    INFO: The CRS clusterware location for 'oracle.crs 10.1.0.2.0' is not found.
    INFO: This is not a cluster system.
    INFO: Node selection page will not be shown.
    INFO: Defaulting prerequisite location to 'C:/ORACLE_Patch_10.2.0.4_Windows/WINDOWS_X86_64/p6810189_10204_MSWIN-x86-64/Disk1/stage/prereq'.
    INFO:
    *** Product-Specific Prerequisite Checks Page***
    INFO: Entry point:oracle.patchset.db_Custom
    INFO: Starting Prerequisite checks : Fri Aug 06 23:04:20 EEST 2010
    INFO: Checking checkToInstallCCR
         This is a prerequisite condition is to check if the ccr component need to be installed or ignored for installation.
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking CompatibilityChecks
         This is a prerequisite condition to check whether the Oracle Home specified by the user already contains any installed product which is incompatible with the product being installed.
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Prerequisite checks completed : Fri Aug 06 23:04:20 EEST 2010
    INFO: oracle.ons Product Location: Empty path specified.
    INFO: oracle.sysman.repository.db Product Location: Empty path specified.
    INFO:
    *** Language Selection Page***
    INFO:
    *** Specify Local Host Name Page***
    INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to '79SSO-LS'. S_LOG_VAR_VALTYPE_CLONE
    INFO: Setting languages [fi, en] for patch 'Oracle Notification Service Patch 10.2.0.4.0 '
    INFO: Setting languages [fi, en] for patch 'Enterprise Manager Repository DB 10.2.0.4.0 '
    INFO: *** Entering Component: oracle.ons installation
    INFO: Setting variable 's_sharedOH' to 'false'. Received the value from the variable calculation.
    INFO: Setting variable 's_patchtmpLocation' to ' '. Received the value from the variable calculation.
    INFO: Setting variable 's_opmnRemotePort' to '6200'. Received the value from the variable calculation.
    INFO: Setting variable 's_opmnLocalPort' to '6101'. Received the value from the variable calculation.
    INFO: Calling Query generalQueries10.2.0.2.0 getOSName
    SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
    "C:\Program Files\Oracle\Inventory\logs\installActions2010-08-06_11-02-02PM.log"
    "C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.err"
    "C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.out"
    INFO: User Selected: Yes/OK
    *************installActions2010-08-06_11-02-02PM.log******************
    **************oraInstall2010-08-06_11-02-02PM.err***********************
    Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries occurred..
    java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries
         at getOSName.performQuery(getOSName.java:16)
         at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2498)
         at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject_s_operatingSystem(Unknown Source)
         at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject(Unknown Source)
         at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:646)
         at oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:1477)
         at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2430)
         at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3844)
         at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
         at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
         at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
         at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
         at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
         at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
    **************oraInstall2010-08-06_11-02-02PM.err***********************
    ***************oraInstall2010-08-06_11-02-02PM.out**************************
    **************oraInstall2010-08-06_11-02-02PM.out*************************

    A similar error is mentioned in MOS Doc 840965.1 (Upgrading Agent 10.2.0.3 To 10.2.0.4 Using OUI Is Failing With "Abnormal program termination") - not sure if the scenario and solution can help in your case.
    HTH
    Srini

  • Printer redirection using Server 2008 R2 RDS

    Hi
    I have a server 2008 R2 (not a domain controller) running as a remote desktop session host with 2 remote XP SP3 client PCs connecting to it. Up until Friday last week these client PCs could successfully print via the redirected printer using the RD Easy
    Print Driver. As from this week though all printing has ceased! No updates have been installed on either server or clients in the interim. When I try to send a test print from the server (logged on using RD 7 for XP) it tells me that the test print has failed,
    do I want to run the troubleshooter? If I say yes then the troubleshooter fails with an unexpected error, the details of which include error code 0x80070057. If i try to print from the server using notepad I get the error "the parameter is incorrect". If I
    print from wordpad the document appears briefly in the queue but nothing prints. If I manually add a printer (using specific printer driver - not easy print driver) and choose the correct redirected port and then print using this printer, the print job appears
    briefly in the queue and then disappears - nothing appears in the print queue on the client PC and nothing prints. Initially printing like this caused the client TsWpfWrp.exe to fail but upgrading the version of TsWpfWrp.exe stopped this problem. I have tried
    updating to .net 4.0 on the client PC, upgrading from RD 6.1 to 7.0, XP SP2 to SP3 all to no avail.
    Does anyone know the solution to this problem? I am at a complete loss as to the way forward. I have checked all group policies and set all the correct permissions on the spool and PRINTERS folder in system32 on the server and nothing seems to help.
    Thanks for your help!

    Hi,
    Please try to check the following items.
    1.      
    Remove the Remote desktop easy print from Print Management console.
    2.      
    Remove the complete package.
    3.      
    Then install the Remote desktop easy print driver again.
    Please also check if the
    fenableRDR key still exists in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd.
    Technology changes life……

  • DL 360 G5 blue screen USB error on server 2008 installation

    Hi i am getting a error "USB, Blue screen followed by a memory dump while trying to install server 2008 on my DL360 G5, I have already tried the Smart start dvd (recommended to fix the problem on other forums) downloaded at the drivers web page for the server, i have the same problem. any help would be greatly appreciated bugcode_Usb_drivererror

    Hi:
    You may also want to post your question in the HP Business Support Forum -- DL Servers Section.
    http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264

  • Occasional groups of iSsciPrt Errors on Server 2008 R2 - CIFS vols on ReadyNAS3200

     I have a Windows Server 2008 R2 serving 4 volumes via iSCSI and a Netgear ReadyNAS 3200.  One user reported getting an error trying to save to the network. Looks like the below happened at the same time:
     All events have same time stamp (6/12/2014 2:07:16 PM)
    Event ID: 129 (Warning)  ISCSiPort  "Description cannot be found"
    Event ID: 9 (Error) iSCSIPrt "Target did not respond in time for a SCSI request   (x21)
    Event ID: 39 iScsiPrt "Initiator send a task management command to reset the target."
    Event ID: 27 iScsiPrt "Initiator could not find a match for the initiator task tag in the received PDU"
     I opened a ticket with Netgear, and they gave the NAS a clean bill of health. Only other things I noticed on the unit was that the time was off and the one of the bonded LAN ports was showing an amber link status rather than green.
     So I don't have a lot of experience with iSCSI and I'm not sure what the next steps would be.  This doesn't happen often, but it may be part of some reoccurring problems.  Any advice appreciated.
    James A. Helfer | COMPUTER SYSTEMS ADMINISTRATOR WTW ARCHITECTS | PITTSBURGH PA

    Hi,
    When the issue occurs, whether all users have the same issue or just the specific user?
    If all users have the same issue, it could be the connection between your server and the NAS.
    Please try the following suggestions one by one:
    1. Upgrade the NIC driver to the latest version
    2. Disable TCP Chimney offload
    Information about the TCP Chimney Offload, Receive Side Scaling, and Network Direct Memory Access features in Windows Server 2008 
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;951037
    3. In HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Disk, edit or add the TimeOutValue entry to set it to 60 seconds in decimal format ((0000003c in hexadecimal).The default is 10
    -- To edit the value for the TimeOutValue entry if it already exists, double-click  the entry, enter the new value, and click OK.
    -- To add the TimeOutValue entry if it does not yet exist, right-click anywhere in the list of values, and then click New > DWORD value. Name the new value TimeOutValue, and then double-click it to edit the setting. 
    If you have any feedback on our support, please send to [email protected]

  • How to create a Web Authentication Meathod using Server 2008 r2 ?

    HI, i am a NewBee in Server Managment. am using windows server 2008 R2 Enterprise Edition, with 2 NiC One is Connected to modem other one connected to Lan , using ICS for internet . i have 80 client computers , all clients have access to unlimited internet,
    i want to control them without 3rd part application, or  Create a Web authentication username and Password for users , is there any possible way to create a web authentication server in server 2008 r2 ? plz give me a proper guideline.....

    Hi,
    According to your description, my understanding is that you want to configure web authentication that allow the client to connect to Internet by password and user name.
    I am afraid that no function within Windows Server 2008 R2 may fulfill your requirement. 
    For better control of your clients, I would recommend you to configure the Windows Server 2008 R2 as an RRAS (dial-up) router(use NAT to assign private IP address for the internal network), and connect to the clients with intermediate device, such as hub,
    switch. Cooperate with NPS to provide authentication for network connection.
    3rd party software/device should be needed for configuring web authentication. Here is a deployment scenario just for your reference:
    Web Authentication Using LDAP on Wireless LAN Controllers (WLCs) Configuration Example
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/108008-ldap-web-auth-wlc.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Best Regards,           
    Eve Wang                                                                                            

  • DNS and Active Directory error 4000 server 2008

    Hello all,
    My network skills aren't very good and I'm facing a dilemma. First off we have two Windows servers on the network. The newest is 2008 Standard (named Vader) and the other is 2000 (dells3). Obviously I'd like to get rid of the 2000, but the people in charge
    of my budget haven't given me the option to do so and it's the only back up we have.
    Earlier in the week we had lots of problems. One of our nas boxes locked everyone out who was mapped to it and it would only let me log in through the web portal. Two of our Macs our marketing department uses suddenly locked up and wouldn't let them back
    in (both were part of the Active Directory). A second nas box won't let certain people map to it and for awhile I had issues logging into Vader itself.
    I believe all of these problems are connected to some issues on Vader and possibly in conduction with dells3. In Server Manager under DNS I get error 4000 "The DNS server was unable to open Active Directory. 
    This DNS server is configured to obtain and use information from the directory for this zone and is unable to load the zone without it.  Check that the Active Directory is functioning properly and reload the zone. The event data is the error code."
    Then under Active Directory Domain Services I get error 2042 "It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded
    the tombstone lifetime. Replication has been stopped with this source."
    Followed by more text I can post if needed.
    Under File Services error 1202 "The DFS Replication service failed to contact domain controller  to access configuration information. Replication is stopped. The service will try again during the
    next configuration polling cycle, which will occur in 60 minutes. This event can be caused by TCP/IP connectivity, firewall, Active Directory Domain Services, or DNS issues."
    And finally if I try to open Active Directory Domains and Trusts "The configuration information describing this enterprise is not available. The server is not operational."
    I'm not sure where to start or what to post that might help. Any and all help is appreciated.
    Edit: Also I can only add dells3 as the DNS on Vader in the DNS Manager if I try to add Vader to itself I get an error.

    It's the other way around.  Overall, I'm advising ripping the 2008 server out of AD and adding it back . Let's look at this as a series of steps:
    1.) You do a force demote of the 2008 server because it's tombstoned.  This means the 2008 server is no longer a DC. You are doing a force because it doesn't have the ability to replicate.  If it could replicate, we'd just do a graceful demotion
    and be done with it.
    2.) Once the 2008 server is demoted, we go to the 2000 server which holds the only good copy of AD.  From that server we run a metadata cleanup using the ntdsutil utility.  We use that utility to clean out references to the 2008 server which is
    no longer a DC.
    3.) Once you have a clean AD, you can then promote the 2008 server back into Active Directory.  Make sure Vader is pointing to Dells3 as its primary DNS server before promoting or you'll run into issues.
    Hopefully that clarifies things. 

  • Error using Acrobat portfolio SDK with Flash Builder

    Hi all
    I've been trying to customize a navigator portfolio for Adobe Acrobat X using Flash Builder 4.5. I was running this proyect as Navigator but I received the following Flash Player error:
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at acrobat.navhost.app::SingleNavApp/set productConfig()[C:\dev\A10_1R1_Sandbox\Acrobat\Viewer\AcroView\Portfolio\Flash\Libs\NavHo stUtil\src\acrobat\navhost\app\SingleNavApp.as:333]
    at com.adobe.app::AppPrefsBinding/productConfig()[C:\dev\A10_1R1_Sandbox\Acrobat\Viewer\Acro View\Portfolio\Flash\Libs\NavPreviewShared\src\com\adobe\app\AppPrefsBinding.as:93]
    at com.adobe.app::AppPrefsBinding/refresh()[C:\dev\A10_1R1_Sandbox\Acrobat\Viewer\AcroView\P ortfolio\Flash\Libs\NavPreviewShared\src\com\adobe\app\AppPrefsBinding.as:76]
    at Function/<anonymous>()[E:\dev\4.x\frameworks\projects\framework\src\mx\binding\utils\Bind ingUtils.as:180]
    at mx.binding.utils::ChangeWatcher/wrapHandler()[E:\dev\4.x\frameworks\projects\framework\sr c\mx\binding\utils\ChangeWatcher.as:557]
    at flash.events::EventDispatcher/dispatchEventFunction()
    I've installed Acrobat portfolio SDK into Flash Builder and I have followed the documentation of Building a Navigator from http://learning.adobe.com

    Ok, finally got this working.  Many hidden gotchas. 
    1.  You have to make a Trust File for your custom panel.  This is actually in the SDK, around page 53, so my bad -- but the problem is that there is no feedback from the Adobe application if you don't have this.  The application just hangs.  It should produce an error message "can't find trust file, etc.".  This should not be that hard to implement.
    2.  The latest Flex SDK does not seem to work in Bridge CC or other similar applications.  You have to use Flex SDK 3.x, apparently, and this is NOT in the documentation.  Not only should you set the default SDK in Flex Builder to 3.x (I'm using 3.6) but you have to edit the build.properties file to make sure it's pointing to the correct folder, eg: C:/Program Files/Adobe/Adobe Flash Builder 4.7 (64 Bit)/sdks/3.6.0.  Fortunately Flash Builder 4.7 comes with 3.6 installed.  If you have an older version, it's likely to be completely different.
    More info in this thread: http://forums.adobe.com/thread/1114153.

  • DCOM error - 10010 - Server 2008 R2 Standard

    My server is generating a DCOM error with GUID : 995C996E-D918-4A8C-A302-45719A6F4EA7
    I did some research and found that this should be due to Auto play being enabled, I disabled it and restarted the server but the DCOM event is still happening.
    Another DCOM event is also generated by GUID B286F068-5B17-4AE8-989B-8F9A199C47BA which refer to an HP printer DLL, no one is having any issue with the printer so wondering why it is logging that event.
    Any idea ?
    Thanks

    Hi,
    Regarding to Event ID: 10010 Source: DCOM, please refer to the following thread. It provided the possible causes
    of DCOM Event ID 10010.
    DistributedCOM Error ID 10010
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/77b1db1d-f186-4515-8f7d-2241942eb9b7/distributedcom-error-id-10010?forum=winservergen
    Based on current situation of this problem, please use
    sfc /scanfile command to scans integrity of this specified DLL file. And then check the printer and make sure that install exactly the right drivers. Meanwhile, please find if can update
    the printer driver.
    By the way, you can use
    regsvr32 <filename> command to re-register the DLL file. Then please monitor if the Event ID 10010 still persists.
    Hope this helps.
    Best regards,
    Justin Gu

  • Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

    Hi All
    Please help
    my server not working showing display error window server 2008 r2  error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
    Please help me how to resolve this issue ???
    thnaks !!!

    Hi,
    If there is any external device plug into your computer, please unplug it and restart the Server.
    You can also test the issue in Safe mode.
    If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
    Kate Li
    TechNet Community Support

  • Error while unpacking program, code 2 Win Server 2008

    When trying to run an application (specifically "Image for Windows" by Terabyte Unlimited), I receive the following error message:
    "Error while unpacking program, code 2. Please report to author."
    I have seen numerous hits for this error while searching Google and nearly all of them point to an issue with a Windows Update. However, it's nearly always for Windows Vista.
    I'm getting this error Windows Server 2008.
    I have another machine running Windows Server 2008 that does not have this issue.
    Is this an issue with a particular Windows Update or could something else be the cause?

    C:\Users\administrator>net helpmsg 2
    returns with
    The system cannot find the file specified.
    The package may be corrupt.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • WDS on server 2008 std breaking .WIM files

    Hi,
    SUMMARY - 'Importing images into WDS seems to break them'
    I'm a bit green so i appologise if I'm being stupid. I'm installing and configuring WDS and MDT deployment within a mixed MS 2003 domain environment. We need to be able to deploy 32 bit images and the server will be used for servicing images as well
    as deploying and so (I think) I need to use Server 2008 standard as creating catalogue files on x64 systems for x86 images doesn't work.
    So - the system is:
    Server 2008 standard x86 edition; WDS Deployment Services Role; MDT 2012 Update 1; ADK 8, config manager tools for trace32.exe.
    I have imported win7 boot and install images directly from the original DVD .iso files, both x86 and x64. Both capture and setup images work ok. I've added network drivers to these successfully. I can deploy vanilla win7 x86 and x64 using WDS - this works
    fine.
    So my issue is: I've deployed vanilla windows 7 to a desktop, installed applications, updated config as nessecary etc. Booted using the appropriate capture image and captured a .wim file. I've copied this to my WDS server and imported it as an install
    image. When I try and deploy the image it fails just after the 'expanding windows files' stage. After looking in log files the error seems to be 'selected image file does not have a resource section'.
    I've gone back to the WDS server, exported these image files and tried to mount them using DISM - I get the same error: "1812 The specified image file did not contain a resource section"
    Mounting fails.
    Now I've tried mounting the .wim files using dism BEFORE I import them into WDS and they mount without any issues. As soon as I import them and export them again they will not mount any more.
    Please help, I don't know what else to try! :)
    Some things I've thought but can't find answers to: Can you use 2008 standard to deploy Windows 7 at all? (server is earlier version of windows)
    Is the apparent importing into WDS issue a red herring? Could it be that these images are broken from capture? Is there a way to test this without deploying the image using a USB stick instead of WDS?
    I've tried uninstalling the ADK and installing WAIK instead. Exactly the same result. Here are some choice extracts from dism.log:
    2015-03-02 17:33:18, Info                  CBS    Failed to find a matching version for servicing stack: C:\Users\softset\AppData\Local\Temp\MDTUpdate.2544\Mount\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.2.9200.16384_none_060a6d2998b13f25\
    [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
    2015-03-02 17:33:18, Info                  CBS    Failed to find servicing stack directory in online store. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
    2015-03-02 17:33:18, Info                  CBS    Failed to get proc address for CMP_GetServerSideDeviceInstallFlags [HRESULT = 0x8007007f - ERROR_PROC_NOT_FOUND]
    2015-03-02 17:33:18, Info                  CBS    Failed to load CfgMgr32 DLL. [HRESULT = 0x8007007f - ERROR_PROC_NOT_FOUND]
    2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 Failed to mount the image. - CWimImageInfo::Mount(hr:0x80070714)
    2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:999 - CWimManager::InternalOpMount(hr:0x80070714)
    2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2247 - CWimManager::InternalCmdMount(hr:0x80070714)
    2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070714)
    2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0x80070714)
    2015-03-03 15:29:27, Error                 DISM   DISM.EXE: WimManager processed the command line but failed. HRESULT=80070714

    Hello JPNhingy,
    How to do you capture the .wim file?
    About the question: Can you use 2008 standard to deploy Windows 7 at all? The answer is: Yes, you can use the Windows Server 2008 to deploy Windows 7.
    You could create a capturer image in WDS, for more information, please take a look at the following article.
    http://social.technet.microsoft.com/wiki/contents/articles/11680.creating-a-capture-image-in-wds.aspx
    Additionally, you could use the sysprep to generalize the install image.
    https://technet.microsoft.com/en-us/windows/preparing-an-image-using-sysprep-and-imagex.aspx
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Start Menu Folder Redirection In Windows Server 2008 R2 (Via GPO) For Windows 7 Professional

    Hi,
    I'm having the problem where a redirected start menu appears empty. Using
    server 2008 R2 and the clients are Windows 7 Professional; i am getting empty start menu.
    Note:- Same is working perfectly fine with Windows
    XP machines.
    I believe the policy is set up correctly.
    Setting: Basic (Redirect everyone's
    folder to the same location)
    Path: \\10.x.x.x\redirection\StartMenu
    Options:
    Grant user exclusive rights to Start Menu - Disabled 
    Move the contents of Start Menu to the new location - Disabled 
    Also apply redirection policy to Windows 2000, Windows 2000 server, Windows XP, and Windows Server 2003 operating systems  - Enabled 
    Policy Removal Behavior - Leave contents
    Start Menu and Taskbar
    Policy
    Setting
    Comment
    Clear history   of recently opened documents on exit
    Enabled
    Clear the   recent programs list for new users
    Enabled
    Do not keep   history of recently opened documents
    Enabled
    Do not search   for files
    Enabled
    Lock all   taskbar settings
    Enabled
    Lock the   Taskbar
    Enabled
    Prevent   changes to Taskbar and Start Menu Settings
    Enabled
    Remove access   to the context menus for the taskbar
    Enabled
    Remove All   Programs list from the Start menu
    Enabled
    Remove common   program groups from Start Menu
    Enabled
    Remove Default   Programs link from the Start menu.
    Enabled
    Remove   Documents icon from Start Menu
    Enabled
    Remove   Downloads link from Start Menu
    Enabled
    Remove   Favorites menu from Start Menu
    Enabled
    Remove   frequent programs list from the Start Menu
    Enabled
    Remove Games   link from Start Menu
    Enabled
    Remove Help   menu from Start Menu
    Enabled
    Remove   Homegroup link from Start Menu
    Enabled
    Remove links   and access to Windows Update
    Enabled
    Remove Music   icon from Start Menu
    Enabled
    Remove Network   Connections from Start Menu
    Enabled
    Remove Network   icon from Start Menu
    Enabled
    Remove   Pictures icon from Start Menu
    Enabled
    Remove   programs on Settings menu
    Enabled
    Remove Recent   Items menu from Start Menu
    Enabled
    Remove Run   menu from Start Menu
    Enabled
    Remove Search   Computer link
    Enabled
    Remove Search   link from Start Menu
    Enabled
    Remove See   More Results / Search Everywhere link
    Enabled
    Remove the   Action Center icon
    Enabled
    Remove user   folder link from Start Menu
    Enabled
    Remove user's   folders from the Start Menu
    Enabled
    Remove Videos   link from Start Menu
    Enabled
    Please help !
    Regards Zargar Muneer

    Hi Zargar,
    >>Using server 2008 R2 and the clients are Windows 7 Professional; i am getting empty start menu.
    This is normal, for we disabled the option
    Move the contents of Start Menu to the new location. This option is enabled by default and it will automatically move the existing content to the new location.
    At this moment, we can manually copy the files we want from the local locations.
    Best regards,
    Frank Shen

Maybe you are looking for

  • Adobe Air won't install on my windows 7 computer 64 bit.

    I have copied my log files. I have read forums. I am afraid to get into my registry or use disk cleaners. I'd appreciate any help. I am not able to paste the log into this message. Thanks

  • WiFi Security Option No Longer There in 1.0.1 Update??

    Is the Security Option under the WiFi/Settings no longer there in 1.0.1 Update?? Without it there, it is no longer allowing me to get on 128BIT HEX WEP encrypted WiFi Networks. Thanks, Scott K.

  • How to rotate jserv log files?

    Hi all, We are using 9iAS 1.0.2.1, which has Apache 1.3.12/Jserv 1.1 How to rotate jserv log files? We have 'rotatelog' to rotate httpds_access_log etc.., but no such program for jserv log. (Tomcat has extended rotatelog to jserv, but what about Jser

  • Syncing problem with Iphone 4

    I have an Iphone 4 and purchased an audiobook through Itunes. I synced my phone last night but the book does not show up ANYWHERE on my phone. Help would be appreciated.

  • Unsolicited Remote Desktop Connection

    A large number of users on my SBS2008 domain receive the following message at frequent intervals "computername\admin wants to connect to this machine.Click OK to disconnect your session immediately or click cancel to stay connected.Otherwise you will