Error validating app unable to process Info.plist

"Unable to process application Info.plist validation at this time due to a general error. Please try again later."
My Googling has turned up no alternatives other than Apple's servers are congested and I just need to keep trying every so often. This error first appeared for me yesterday afternoon. Anyone else seen this or have some alternate solutions?

Turns out that I needed to remove armv6 from Architectures in Build Settings. Unfortunately I already submitted a support ticket, I hope this helps someone else.

Similar Messages

Garageband 10- "system overload, audio driver unable to process info in time"

I have a project with 3 tracks, drums (via the new drummer feature), guitar (recorded with rocksmith cable), and vocal track (recorded with the standard built in mic). I put it on ITunes and can listen to it fine on there but I want to edit it more. I didn't have any issues with playback until yesterday when I got the "disk to slow or system overload" message. I got that to go away by saving the project in a different folder. Now today I'm getting the "system overload, audio driver unable to process info in time" error. I've heard RAM is the problem and that I should increase my RAM? I brought up the activity monitor app but it doesn't say anything about how to increase my RAM, can you help me out? Activity monitor reads as follows...
Physical mem- 4.00 GB
Memory Used- 3.98 GB
Virtual Memory- 10.01 GB
Swap Used- 1.33 GB
App Memory- 1.08 GB
File Cache- 224.5 MB
Wired Memory- 1.12 GB
Compressed- 1.56 GB

It may be a problem of not enough RAM, yes. 4GB is not much. It will help, if you close all other apps, before recording, also restarting the Mac will help, if you are using any incompatible, older applications, that may have a memory leak.
If your Mac can support more memory, try to upgrade the RAM: Which model of Mac do you have, and which MacOS X version?
In Yosemite you can see how to upgrade the RAM, if you open the  menu in the upper left corner of the screen. Select "About this Mac", then click the "Memory" tab in the panel: It will show you the memory slots and if you can extend it. There is also a link to "Memory Upgrade Instructions".

10.5.6: "Unable to load Info.plist exceptions (can't get exceptions URL)"

Hi, all. I just upgraded my iMac G5 to 10.5.6 using the software updater. Now when I'm working with a terminal window open, I get messages like this:
Computer:~ mine$
Broadcast Message from [email protected]
(no tty) at 22:34 EDT...
Mar 30 22:34:29 Computer /System/Library/Frameworks/PubSub.framework/Versions/A/Resources/PubSubAgent.ap p/Contents/MacOS/PubSubAgent[1563]: Unable to load Info.plist exceptions (can't get exceptions URL)
Broadcast Message from [email protected]
(no tty) at 22:34 EDT...
Mar 30 22:34:31 Computer /Applications/iPhoto.app/Contents/MacOS/iPhoto[1562]: Unable to load Info.plist exceptions (can't get exceptions URL)
I am completely at sea. Can anyone please help? Thanks.

Hello, I have the same problem!
The same broadcast messages: Unable to load Info.plist exceptions (can't get exceptions URL)
also I can't install nor 10.5.7 update, nor combo update. I receive the same Install Failed error message. I tried archive and install from original system DVD. Allways the same error message:
Install Failed
The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for a replacement.
Did you find any solution?
Zoli

Failed to Open FR report With Error code 500 - 'unable to process request'

I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
    at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
        at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServer

It is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com

When I view email on my iPad, I get an error message saying "unable to process your request" . How do I correct this?

When I access my iPad email, I get an error message saying "unable to process your request" How do I correct this?

Start with the basics. Force close mail and reset your iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't help, you might want to consider resetting your router by unplugging it from power for about 30 seconds. That can help at times even if all of your other devices are connecting to the Internet. I suggest this, because the message that you are getting may be due to a bad connection to the Internet.

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please help

Wait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.

Hello!!! I Reenroll "Developer Enterprise Program" but error:We are unable to process your request. Help pleeeeees!

Hello!!! I Reenroll "Developer Enterprise Program" but error:We are unable to process your request. Help plees!
Development period ended six months ago.

???????

Error: Server was unable to process request. --- Object reference not set

Hi All,
I am using ALSB 2.6.
In the project, i have requirement to do transformation of incoming request with CData Tag and getting a response from the remote service.
I have configured the Proxy Service and Business Service with a message route in which transformation is happening using replace action and adding a XSLT there.
While sending the request from ALSB Test Console , its doing the transformation correctly as follows:
Transformed Request at ALSB
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<lif:MultipleTermLifeQuotePublic xmlns:lif="https://www.farmerslife.com/LifeNetWS/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<lif:xmlInput>
<TERM_LIFE_RATE_QUOTE>
<Quote_Request Quote_Sequence = "100">
<Face_Amount>
1000.00
</Face_Amount>
<Gender>
male
</Gender>
<Age>
100
</Age>
<Level_Term_Years>
100
</Level_Term_Years>
<Type>
string
</Type>
<Nicotine>
true
</Nicotine>
<CIR_Amount>
1000.00
</CIR_Amount>
<State>
string
</State>
<Waiver_Premium>
false
</Waiver_Premium>
</Quote_Request>
</TERM_LIFE_RATE_QUOTE>
</lif:xmlInput>
</lif:MultipleTermLifeQuotePublic>
</soapenv:Body>
After transformation, when its passing through Business Service its giving the followin error at ALSB console
<soap:Body xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Fault>
<faultcode>soap:Server</faultcode>
<faultstring>
Server was unable to process request. ---> Object reference not set to an instance of an object. </faultstring>
<detail/>
</soap:Fault>
</soap:Body>
[b]When i am sending the same request through SOAP UI, I am getting a correct response.
Can any one guide me what to do regarding this, where i am going wrong.
Please try to reply as soon as possible. Its an urgent issue.

That error you're getting is a typical error message from Windows web services. It simply means there was something unspecified that was wrong with your message. You'll need to find a way to extract the actual message being sent in both the "good" and "bad" cases and look at the differences. You can do that in ALSB with a "Log" action.

SOAP Parsing Error: Server was unable to process request

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05 Information Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05 Information SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05 Information SOAP: completed the processing
2010-05-10 13:15:05 Information SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06 Error The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

Source structure;
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SOR_test xmlns:ns0="http://MTSINDIA/TEST/SingleValue">
   <ITEM>
      <sSlsOrderCode>100</sSlsOrderCode>
      <sDlrCode>200</sDlrCode>
      <sRejectReason>300</sRejectReason>
      <nCircleCode>400</nCircleCode>
   </ITEM>
</ns0:MT_SOR_test>
Final Target strucutre accept Web Service
<?xml version="1.0" encoding="UTF-8"?>
<ns1:SalesOrderReject xmlns:ns1="http://tempuri.org/"><ns1:SalerOrderRejXML><ITEM><sSlsOrderCode>100</sSlsOrderCode><sDlrCode>200</sDlrCode><sRejectionReason>300</sRejectionReason><nCircleCode>400</nCircleCode></ITEM></ns1:SalerOrderRejXML></ns1:SalesOrderReject>
The above result is the test result which I got from using CONCAT and CONSTANT function si graphical mapping which is not a feasible solutin. It works in small strucutres but where the data structure is big (lets say 40 nodes) and coplex structure than it will fail.
Cannot use XSLT as CDATA will come in picture. Any other options?

Manage app unable to process requests

Hi i added simplified Chinese to my app ( not submitted yet) and then tried to delete the default language english.
Now the app shows in manage apps without a name just icon and when i click icon to edit app it says unable to process request.
I tries to add another app tp use in its place since i am ready to submit binary but cannot add a name as Apple says name used ( which is my other app)
What can I do !! please help
Thanks
Rajiv

Also experiencing this. Have been waiting 4 days for a resolution from support.

SOAP Error : Server was unable to process request. Key cannot be null.#

HI, When I process SOAP call from ABAP using class csoaptransporthttp->request_response, I am getting following error message:
"Server was unable to process request. > Key cannot be null.##Parameter name: key"
Is anybody as the clue to resolve this error ?

Hi,
if you're doing a SOAP client - did you compare with this example:
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d053e74911d6b2e400508b6b8a93/content.htm
Regards,
Michal Krawczyk

Error while accessing Child Form process info

I've created my Process task Adapter and attached it to "AD User" Process Definition.
When I try to retrieve information about AD Groups from the child form of UD_AD_USER (form named AD_RSC), I get the following error:
ERROR,28 okt 2007 15:08:26,765,[XELLERATE.DATABASE],select obi_key, UD_ADUSER_VERSION from UD_ADUSER where obi_key=5
java.sql.SQLException: ORA-00904: "OBI_KEY": invalid identifier
the problem is that there's NO field named OBI_KEY in the standard UD_ADUSER table.
The same thing happens when I'm trying to access child form data through Xellerate API
( getChildFormDefinition(long plParentFormDefinitionKey, int pnParentFormVersion) or getProcessFormChildData(long plChildFormDefinitionKey, long plProcessInstanceKey) )
is it some king of bug? I haven't found anything at metalink :(

I have no issues getting child table information using the APIs... I am doing it on both 9.0.1.X versions and 9.0.3.X versions. I would suggest looking at how you are getting the process keys.. (i.e., are you mapping it in through the adapter, getting it from findObjects, etc)... and also look at your configuration of the child tables and make sure everything is active and kosher.
If you post the rest of your code, I might be able to help you.
Cheers,
Deborah

Info.plist: Unable to verify icon demenstions, no icon found.

Here's a weird problem:
If I build the app for ad-hoc distribution, it runs fine on the iphone 4. I see the icons, everything is good.
Now I do a app-store-distirbution, and this error comes up :
Iphone/ Ipod Touch: info.plist: Unable to verify icon dimenstions, no icon found. You must define CFBundleIcons, CFBundleIconFiles, CFBundleIcondFile or provide a default Icon.png that is 57x57
Ipad: info.plist: Unable to verify icon dimensions, no icon found. You must define CFBundleIcons, CFBundleIconFiles, CFBundleIcondFile or provide a default Icon.png that is 72x72
If I open up the IPA file with Winzip, I can see all the icons in the correct directory.
I have tried this on a new empty FlashBuilder project where I changed nothing except the Application ID and the ICON files.
I have the app set to high-resolution, so there should be no need for a 57x57 icon.
I'm using the Windows version of FlashBuilder 4.5
What is up Adobe?

Which program are you using to develop in? If it's Flash Pro then you go into the iOS settings and under Icons you choose the icons to use for each size that it lists. The one used for the iPhone icon is 57x57 in size. The one used by a Retina display is 114x114.

Problem when transfer app to another developer account - Unable to process request

Hi, I create one app and I sell it to another dev.
When I try to transfer my the app to the other developer account, by clicking in the 'transfer app' button in itunesconnect, I receive the following error message.
Unable to Process Request
Your request could not be processed. For additional help, send an email [email protected]
All my apps receive the same error if I try to tranfers them.
I send an email now to itunesconnect, but I want to know if more people have the same problem.

I found all the app, its status is Ready for Sale. As long as Iclick Transfer app,
Will appear ：
Unable to Process Request
Your request could not be processed. For additional help, send anemail to [email protected]
I found the answer them mechanically , including many developershave responded to this question , and them did not realize theseriousness of the problem. We always perfunctory and did notrespect us , do not them will not have their own tests to see you. I was full of accessories these screenshots.
I tried operating system windows8.1, ubuntu13.1, Mac OSX10.9.1, isthe same problem.
I tried the browser : IE11.0, GoogleChrome_version_33.0,FirefoxESR,
Opera12.15, Safari5.1.7, all of the same problems are tried.
I am very angry , because I could not transfer app, speaking lostan order , the loss sum of money, but
More serious is my personal reputation and integrity iscompromised. I am very unhappy, very angry. them have such acavalier attitude , and perfunctory answer, do Steve Jobs is gone,you will like this?

Unable to process your transaction error in istore

Hi all,
I am working on istore implementation process in R12.
I had created the new business contact user, and login into the istore using the created contact user login.
I got following error while selecting the item to adding the shopping cart.
Error message is:
Unable to process your transaction. The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.API_MISSING_ID (COLUMN=ACCT_ROLE). Unable to create a valid contact for the given party id (party_id = 8333)
Also this erroris not the consistent, I got this error while newly created user entered into the istore. After some trying it will work for the same user . But already created old users working fine.
Also i executed the invalid object query, i found some of the ASO objects are invalid.
ASO_BI_QOT_APR_MV - MATERIALIZED VIEW- invalid
ASO_BI_QOT_CUST_MV - MATERIALIZED VIEW- invalid
ASO_BI_QOT_RUL_MV - MATERIALIZED VIEW- invalid
ASO_BI_QOT_SG_MV - MATERIALIZED VIEW- invalid
ASO_BI_RSG_PRNT_MV- - MATERIALIZED VIEW- invalid
Please help on this issue.
Thanks
Prab

Please see if any of below links help you:-
11.5.10/ R12: Troubleshooting Shopping Cart, Checkout and Order Submission in Oracle iStore [ID 580149.1]
R12: Oracle iStore Add Item to Cart Error: "The Operating Unit Is Either Invalid Or It Cannot Be Derived." [ID 756497.1]
12: Oracle iStore Order Error: "Unable to Process your Transaction. The Operating Unit is either Invalid or it Cannot be Derived" [ID 880086.1]
12: Oracle iStore Submit Order After Creating Address Error: "This Site is Not a Valid Site for Given Bill to Customer Account/Customer Account and API_MISSING_ID(COLUMN=ACCT SITE)" [ID 1134624.1]
Thanks,
JD

Error validating app unable to process Info.plist

Similar Messages

Maybe you are looking for