Error validating tranformation file

Hello all, I am trying to load a Data Package in BPC.
Created a flat file and tranformation file.
When validate the tranformation file I am getting the following error:
Validate has successfully completed
ValidateRecords = YES
Task name CONVERT:
No 1 Round:
Command CATEGORY does not start with *
Error: Validate with data file failed
I don't have a logic activated. I don't understand the error, whare I set the command Category?? this is a domension name instead a command.
Any Idea what am I doing wrong??
Thanks
Sergio

Thanks Pravin.
This is extrange I have tried all the combination for Header and Skip options but allways got the error.
I changed the transformation file as follow :
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ;
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category =*COL(1)
Entity =*COL(2)
P_ACCT =*COL(3)
P_Activity =*COL(4)
P_DataSrc =*COL(5)
RptCurrency =*COL(6)
Time =*COL(7)
Amount =*COL(8)
*CONVERSION
now the error is different:
Validate has successfully completed
ValidateRecords = YES
Task name CONVERT:
No 1 Round:
An exception with the type CX_SY_STRUCT_COMP_NAME occurred, but was neither handled locally, nor declared in a RAISING clause
Component Name '2008.OCT' of the Component 15 Contains an Invalid Character
Error: Validate with data file failed
any idea??
Thanks
Sergio

Similar Messages

Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file

Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
web application’s User Policy. I can use these services just fine using Nintex 2013 Workflow.
Open InfoPath Designer 2013.
Select Blank Form and click Design Form button.
Click “Data” tab.
Click “From Web Service” and select “From SOAP Web Service”
Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
Click Next.
Windows Security window pops up.
Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
Click OK. It prompts for credential multiple times.
I get below this error messages:
Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
InfoPath cannot find or cannot access the specified Web Service description.
The file is not a valid XML file.
Not enough storage is available to process this command.
We have a project that is in need of these services using InfoPath so any help is greatly appreciated.

Hi Brian_TX,
For your issue, try to the following methods:
Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
Replace all instances of "parameters" from the web service wsdl with the name "parameter"
There are some similar articles about the issue, you can have a look at them:
http://www.infopathdev.com/forums/t/23239.aspx
https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
Best Regards
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Import AOL Communicator mail failed. Error: no valid mbox files were found

I´m having problems to import (archived) AOL Communicator mail messages into Mac Mail. After choosing File > Mailboxes > Import data from "Other" and then selecting the the folders "LIbrary" > "Application Support" > "AOL Communicator" > "local" > "Archives.sbd", I always get the error message: no valid mbox files were found.
(Actually the Received and Sent files in the Archives.sbd subfolders are NOT highlighted, even though the Archives.sbd and it´s subfolders (like myaolmail.sbd) are.)
Mac Mini Mac OS X (10.4.5) AOL Communicator for Mac
Mac Mini Mac OS X (10.4.5)

Hi,
I am in the same situation (just posted myself!), and am trying this out right now:
http://www.apple.com/downloads/macosx/internet_utilities/aolserviceassistant.htm l
Maybe it will work for you?
Good luck,
Allyosn

I have an older version of itunes on my L drive. Everytime I try to download the newest version I get the error itunes.resources is not a valid short file name. Now I obtained an iphone and cannot sync the phone to my account because it wants me to upda

I have an older version of itunes on a separate drive. Everytime that there has been an update to itunes it will not let me update. Now I purchased an iphone and I hooked the phone up to the computer and it tells me I need to install the latest version of itunes. I downloaded to try it, but I keep getting an error message that says itunes.Resources is not a valid short file name. What can I do from here?

That is a new one on me.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Error - 2048 not a valid movie file

hello,
I'm a NAPP member and had been following the photoshop TV casts on QT....however, now I get the error message 'error - 2048 not a valid movie file'...its an mpeg4 QT file, but I get the message whenever I attempt to play the downloaded file...or when I try to just watch the stream, it won't open the URL...these are the only movies that I'm having this problem with...as I can watch other movies from other sites w/o incident...NAPP hasn't replied to my inquiries except that they don't support the TV shows.
Any ideas?...would be appreciated...
Thanks...
G5 - dual 1.8 ghz - 2ghz ram Mac OS X (10.3.7) Dell Inspiron Core Duo notebook w/ XP home

T S
Thank you very much for the link to videolan.org. I was having the same problem playing downloaded Photoshop TV videos. I tried MPlayer which worked but was not comprehensible. I had never heard of videolan, but it works like a charm.
Thanks again.
17 PowerBook, 1.33 Ghz Mac OS X (10.4.6) 2 GB Ram, iWeb 1.1.1

REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
            fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
            createDeployment.Add(xName);
            createDeployment.Add(xPackageUrl);
            createDeployment.Add(xLabel);
            createDeployment.Add(xConfiguration);
            createDeployment.Add(xStartDeployment);
            createDeployment.Add(xTreatWarningsAsError);
            requestBody.Add(createDeployment);
            requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
                uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
            responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
            request.Method = method;
            request.Headers.Add("x-ms-Version", version);
            request.ClientCertificates.Add(certificate);
            request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
                        requestStream, System.Text.UTF8Encoding.UTF8))
                        requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
                response = (HttpWebResponse)ex.Response;
try
                statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
                        responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
                    requestId = response.Headers["x-ms-request-id"];
finally
                response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
                    uri.ToString(),
Environment.NewLine,
                    (int)statusCode,
                    statusCode,
                    responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
Shubhendu

Please find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G

"not a valid short file name" and "invalid character" install errors

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Symptoms
While upgrading or uninstalling a Windows software application (such as iTunes for Windows or QuickTime for Windows), you may receive one of the following error messages:
file name is not a valid short file name
The folder path 'folder name' contains an invalid character.
... where file name could be the name of any file, and folder name could be the name of any folder.
In the case of software that uses advertised shortcuts (such as recent versions of iTunes for Windows or Safari for Windows), the messages may also appear when attempting to launch software that has already been installed.
Resolution
The error messages are usually caused by damage to the installation database for the application. Clearing the installation database for the application by using the Windows Installer CleanUp utility can usually get you past the error message.
(1) Click [here|http://support.microsoft.com/kb/290301] first, and read the important information about the utility.
(2) Click the *Download the Windows Installer Cleanup Utility package now* link on that page to download a file titled msicuu2.exe.
(3) Open the msicuu2.exe file and follow the prompts to install it.
(4) In your Start menu click *All Programs* and then click *Windows Install Clean Up.* The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(5) Select the software you're getting the "not a valid short file name" or "invalid character" message for from the list and click Remove.
(6) Click OK in the confirmation dialog that appears.
(7) If you have multiple entries for the software you're getting the "not a valid short file name" or "invalid character" message for, repeat steps 5 and 6 for the other entries for the software.
(8) Click Exit.
(9) Restart the computer.
If you were getting the "not a valid short file name" or "invalid character" message when trying to upgrade or launch software, now try reinstalling the latest version of the software.
If you were getting the "not a valid short file name" or "invalid character" message when just trying to uninstall software, program files for the software in question will remain on the PC after it has been removed by the Windows Installer CleanUp utility. If you want to remove leftover program files, check in at the appropriate forum at [Apple Discussions|http://discussions.apple.com/index.jspa?categoryID=1] and ask which files can be safely removed.
This is the 1st version of this tip. It was submitted on March 24, 2010 by b noir.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Go to Microsoft website to fix installer file problems.
Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
Download and Install iTunes

Error in xml file validating to xml schema

Hey,
I am getting the following error while validating xml file to its schema:
The error is:
SAMPLEITEMDLFILE.xml:2,139: no declaration found for element 'WMWROOT'
The XML document SAMPLEITEMDLFILE.xml is NOT valid (1 errors)
schema file:
<?xml version="1.0" encoding="utf-8" ?>
<xs:schema id="ItemDownload" targetNamespace="http://www.manh.com/ILSNET/Interface" elementFormDefault="qualified"
xmlns="http://www.manh.com/ILSNET/Interface" xmlns:xs="http://www.w3.org/2001/XMLSchema" version ="2007">
<xs:include schemaLocation="Item.xsd" />
<xs:element name="WMWROOT" nillable="true" type="WMWROOT" />
<xs:complexType name="WMWROOT">
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" name="WMWDATA" type="WMWDATA" />
</xs:sequence>
</xs:complexType>
<xs:element name="WMWDATA" nillable="true" type="WMWDATA"/>
<xs:complexType name="WMWDATA">
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" name="Items" type="ItemList" />
</xs:sequence>
</xs:complexType>
<xs:element name="Items" nillable="false" type="ItemList" />
<xs:complexType name="ItemList">
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" name="Item" nillable="true" type="Item" />
</xs:sequence>
</xs:complexType>
</xs:schema>
This is the part of PL/SQL code thru which I am generating the xml:
UTL_FILE.put_line (l_out_file, '<?xml version="1.0" ?>');
UTL_FILE.put_line (l_out_file, '<WMWROOT');
UTL_FILE.put_line (l_out_file, 'xmlns="http://www.manh.com/ILSNET/Interface"> ');
UTL_FILE.put_line (l_out_file, '<WMWDATA>');
UTL_FILE.put_line (l_out_file, '<Items>');
I am validating it in stylus studio tool.
Can any1 tell me where I am goin wrong?

Hi,
I am using databse version 10.2.0.03. I am getting the output of xml file like tis:
<?xml version="1.0" ?>
<WMWROOT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.manh.com/ILSNET/Interface ItemDownload.xsd">
WMWDATA>
<Items>
<Item>
<action>Save</action><UserDef8>10074</UserDef8><active>Y</active><availableonweb>N</availableonweb><cost>285.93</cost><desc>HP DESKJET PRINTER (EMBLA)</desc><HarmCode><Identifier>9019.20.0000</Identifier></HarmCode><Item>R145-794</Item><InventoryTracking>Y</InventoryTracking><LongDesc>HP DESKJET PRINTER (EMBLA)</LongDesc><LotControlled>Y</LotControlled><SerialNumTrackInbound>Y</SerialNumTrackInbound><SerialNumTrackInventory>Y</SerialNumTrackInventory><SerialNumTrackOutbound>Y</SerialNumTrackOutbound><StorageTemplate><Template>Each</Template></StorageTemplate><XRefs><XRef></XRef></XRefs>
</Item>
</Items>
</WMWDATA>
</WMWROOT>
My plsql code is like tis:
SELECT /*rule*/
XMLELEMENT (
"Item",
XMLFOREST (action AS "action",
Userdef8 AS "UserDef8",
active AS "active",
availableonweb AS "availableonweb",
cost AS "cost",
description AS "desc"),
XMLELEMENT ("HarmCode",
XMLFOREST (Identifier AS "Identifier")),
XMLFOREST (
Item AS "Item",
inventorytracking AS "InventoryTracking",
Longdesc AS "LongDesc",
lotcontrolled AS "LotControlled",
serialnumtrackinbound AS "SerialNumTrackInbound",
serialnumtrackinventory AS "SerialNumTrackInventory",
serialnumtrackoutbound AS "SerialNumTrackOutbound"),
XMLELEMENT ("StorageTemplate",
XMLFOREST (Template AS "Template")),
XMLELEMENT (
"XRefs",
XMLELEMENT ("XRef", XMLFOREST (XRefItem AS "XRefitem")))).
getclobval ()
----------------------------------------writing to utl file-------------
l_out_file :=
UTL_FILE.fopen (lv_path,
-- lv_out_file,
'testingitemsdl.xml',
'W',
32767);
UTL_FILE.put_line (l_out_file, '<?xml version="1.0" ?>');
UTL_FILE.put_line (l_out_file, '<WMWROOT');
UTL_FILE.put_line (l_out_file, 'xmlns="http://www.manh.com/ILSNET/Interface"> ');
UTL_FILE.put_line (l_out_file, '<WMWDATA>');
UTL_FILE.put_line (l_out_file, '<Items>');
FOR i IN lc_item_info
LOOP
UTL_FILE.put_line (l_out_file, i.item);
END LOOP;
UTL_FILE.put_line (l_out_file, '</Items>');
UTL_FILE.put_line (l_out_file, '</WMWDATA>');
UTL_FILE.put_line (l_out_file, '</WMWROOT>');
UTL_FILE.fclose (l_out_file);

Adobe Reader XI Install Error 1325 AI_RecycleBin is not a valid short file name

Adobe 10 worked fine on my computer, when I did the update for Adobe XI I got this error. I tried a couple of times to redownload and install with no success. Adobe Reader 10 wouldn't work either. I did a restore on my computer back before the Reader update and that did not get Adober Reader back to working.
I have been through the Adobe Help & Support, and Community. I have used the uninstaller programs and checked anything and everything I found in those two places. I even tried to install Reader 9 to no avail.
I am ready for some help and ideas?

In your post https://forums.adobe.com/thread/1572490 you show message 'Documents is not a valid short file name'. Now you have the same problem with AI_RecycleBin?

Unable to install Safari 5: "not a valid short file name" error

Hi all,
Previous thread has been archived, but I thought I'd post an update on this issue, since we finally solved it!
To recap, I was getting an error on trying to install Safari which said "<username> is not a valid short file name", and the installation would fail. If installing under an admin username with a shorter name, the installation would succeed, but the same error message would occur for the original user when trying to launch Safari, during the initial configuration process. The problem also plagued some other installation processes, including (for example) Adobe Acrobat updates.
The problem turned out to be related to our redirection of user's profiles (My Documents, Application Settings etc.) to a fileserver. These are pointed to a file share named users on each office's primary file server, and this works fine for most purposes. However, we did not allow users read access to the "users" folder on the server in which their individual user directories were located (this was so users could not browse a list of employee names in this folder). This turned out to be causing the problem; by allowing read access to the folder, all the issues where cleared up.
Anyway, I hope this helps anyone else who may have experienced the same problem!

Excellent news, lab.
Many thanks for letting us know the resolution.

Error validating the transformation file

Hi All,
We have a Sales Application for which we are loading the data through flat file. The data file has been created and uploaded using UJFS. The transformation file is giving error while validating saying that conversion files do not exist. We have maintained the conversion files for each of the dimensions in BPC except the ones that have to loaded with a constant. Any help on the folllowing error log: The conversion files exist in the company folder. Please advise
[Start validating transformation file]
Validating transformation file format
Validating options...
Validation on options was successful.
Validating mappings...
Validation on mappings was successful.
Validating conversions...
The conversion file does not exist. (ZTIME.XLS)
The conversion file does not exist. (ZACCOUNT.XLS)
The conversion file does not exist. (ZPRODUCT.XLS)
The conversion file does not exist. (CHANNEL.XLS)
The conversion file does not exist. (ZENTITY.XLS)
Validation on conversions was successful.
Creating the transformation xml file. Please wait ...
Transformation xml file saved successfully.
Connecting to server ...
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
[The list of conversion file]
Conversion file: DataManager\ConversionFiles\ZTIME.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\ZACCOUNT.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\ZPRODUCT.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\CHANNEL.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\ZENTITY.XLS!CONVERSION
Task name CONVERT:
XML file (...BUDGET\SALES\DATAMANAGER\CONVERSIONFILES\ZTIME.CDM) is empty or is not found
Cannot find document/directory
Error: Validate with data file failed
Thanks,
Santosh

Hi Santosh,
I am sure you would done it correctly. However, just to be on the safer side, lets revisit all the steps.
From BPC excel, we create a new conversion. Check the name of the worksheet (not the workbook). By default, it will be Conversion. You can change it to something else also. Lets say, we change it to Account. So, the sheet's name is Account. We validate and save the conversion as myconversion.xls. This will create another file named myconversion.cdm. Check the location properly while saving the conversion file. The location would be
HTTP://server_name/appset/application/DataManager/ConversionFiles.
Save it under company folder.
Go to the server, where BPC has been installed. Go to the folder
\Webfolders\appset\application\DataManager\ConversionFiles
Check whether the conversion file is present or not. We should have both "myconversion.xls" and "myconversion.cdm".
Create a new transformation file. Under the *CONVERSION section, We define the conversion file to be used. The format would be
Dimension_Name=conversion_file_name.xls!sheet name
In our example, it would be myconversion.xls!account. (check the use of the conversion file name and the sheet name).
Save and validate the transformation file. Mostly, the issue is around the conversion file name and the sheet name. Check all the steps.
Hope this helps.

"1325 Error: iTunesHelper.Resources is not a valid short file name"

I recently got a new hard drive, and I tried to drag all of my iTunes information to it, and it did. But when I opened iTunes, it said that it was not installed properly and that if I wanted to get cd track names I would have to install it again. So I deleted it, and now when I try to reinstall iTunes, I get the following error:
"1325 Error: iTunesHelper.Resources is not a valid short file name" I don't remember if it was iTunesHelper or iTunesMiniplayer, but it was one of the two. I have tried everything I can think of to fix this. I have tried doing a system restore, getting rid of the registry information for the entire apple corp. folder, and searching for anything iTunes and deleting it. HOW DO I FIX THIS!? I need iTunes to put music on my ipod (which also got deleted during this).
PLEASE HELP!!

Ok first of all never try just copying a program folder again. You always need to do an fresh install.
Try uninstalling iTunes, then going into C:\Documents and Settings\<<Your user Name>>\Application Data\and rename the "Apple Computer" folder to "_Apple Computer"
Then go to C:\Documents and Settings\All Users\Application Data\ and rename the "Apple Computer" folder to "_Apple Computer"
Then go to My Documents > My Music and move the files iTunes Library.itl and iTunes Music Library.xml any where else. Do not delete them.
Then go to C:\Program Files and delete the iTunes folder if it is still there.
Then reboot.
Then try re installing.
After you have that copy your music files to the new PC and use the File > Add Folder option to add them to iTunes. Use the other import features under File to import the other music data

Error 1325 (not valid short file name) during JRE setup

Attempting to setup tle latest version of JRE on Windows XP Pro (either with online or offline setup), after configuration check, an error message box appears, saying
"Documenti is not a valid short file name"
The related error code is 1325.
What may be the cause of this issue?
Thanks in advance :-)

Sorry for the inconvenience, but I've posted this message in a wrong section... can you delete it, please?

ERROR OGG-00446 No valid log files for current redo sequence 142

2011-02-03 14:26:41 ERROR OGG-00446 No valid log files for current redo sequence 142,
thread 1, error retrieving redo file name for sequence 142, archived =0,
use_alternate = 0Not able to establish initial position for begin time 2011-02-03 14:25:17.
Is this an error finding the redo logs or is this an error finding the archive redo logs.

Yes. It depends - is that sequence number in the current log group, or is it in an archived redo log?

Error creating AIR file: Unable to build a valid certificate chain for the signer.

Hi, My boss got a certificate from Thawte, and I'm getting this error message when building my AIR app.
Error creating AIR file: Unable to build a valid certificate chain for the signer.
I'm on windows XP.
thanks,
steve

To manage your code signing certificate, please see
http://www.adobe.com/devnet/air/articles/signing_air_applications_print.html
The error you are seeing is typically caused by exporting a cert without the trust chain. On Windows, in IE, you can manage your keystore by going to
Internet Options > Content > Certificates
When you export the certificate needed for signing your app, be sure to check “Include all certificates in the certificate path, if possible”.

Error validating tranformation file

Similar Messages

Maybe you are looking for