Error: Validity of Certificate from list with PSE type PSE ends in 3 da

Hello,
our system is reporting the followin warning
Error: Validity of Certificate from list with PSE type > PSE < ends in 1 days, more notes on system log (SM21)
We check the transaction STRUST and STRUSTSSO2, the certificate between ERP and EP expires today. The ERP system is SAP R/3 Enterprise and EP release is 6.20
Please how can we create the certificate in that releases of SAP ERP and EP, we only found information about this procedure in the newest releases.
Thanks

Hi
Is the SAP Logon certifiacte goiogn to expire??From Portal to ERP??
If this is PSE then follow this [Link.|http://help.sap.com/saphelp_nw2004s/helpdata/EN/a6/f19a3dc0d82453e10000000a114084/frameset.htm]
Regards
Ajay

Similar Messages

Error : Validity of certificate (...) PSE SSL ends in 1 day

Dear all,
I have a certificate problem with my WAS system.
"Validity of certificate from list with PSE type >SSL Client (Standard)< ends in 1 day, for more information, see the SAP System Log (transaction SM21)"

==> I have a BSP website https://services.aquasambre.be/service which is using a certificate valid until June 14th 2006.
==> I go through transaction SM21, but there is no further information.
==> I go through transaction STRUST,
> PSE System 
--> Red cross for "SNC (SAOCryptolib)
> SSL Server
--> Green (ok) but fields "begin/end of validity" are empty
> SSL Client anonymous
--> Green (ok) but fields "begin/end of validity" are empty
> SSL Client standard
--> Green (ok) but fields "begin/end of validity" are empty
==> I go through the amazing SAP documentation... "I'm a bit lost"
... Maybe have you already encountered this kind of problem... do you have an advice for me ?
Nico
PS : My problem occurs after installation of support packages.
PPS : Why are they all on holiday ??? ;o)

I have found where the cerficate fails :
using program SSF_ALERT_CERTEXPIRE -->
Client SSL (standard) SSLC DFAULT
Certificat personnel
CN=Client, OU=I0020211069, OU=SAP Web AS, O=SAP Trust Community, C=BE 01.01.2038
Liste des certificats (Lste Certif.)
 1 = CN=extn12.nrb.be, OU=I0020211069, OU=SAP Web AS, O=SAP Trust Community, C=D 01.01.2038
 2 = EMAIL=[email protected], CN=vdeler, OU=nrb logiciels, O=nrb logiciels, L=hers 18.08.2005
I can have the same information using STRUST. 
So if I go through OSS note 499386, the solution seems to be "generate a new PSE (with the same name) and resend a certificate request to SAP"
--> Could someone tell me how I can send a request to SAP to renew the concerned certificate ?

[svn:fx-trunk] 10943: Fix to dragging from List with multiple-selection

Revision: 10943
Author:   [email protected]
Date:     2009-10-08 15:46:27 -0700 (Thu, 08 Oct 2009)
Log Message:
Fix to dragging from List with multiple-selection
- The fix is to postpone the selection commit until we make sure the user has not started a drag gesture.
- Exclude the dragEnabled, dropEnabled, dragMoveEnabled properties for DropDownList
QE notes: None
Doc notes: None
Bugs: None
Reviewer: Deepa
Tests run: checkintests, mustella List, DropDownList
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DropDownList.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as

Can we have the 'select list with submit' type within a tabular form?

An item can be the "Select list with submit' type so a form has no problem with it. However, when I built a tabular form manually, I couldn't find this type. There are only three types avaiable: "named", "static", and "dynamic".
Is it possible to have the "submit" type so columns of the tabular form can be dynamically rendered based on the user inputs?
Another question I have is how to dynamically build the tabular form with decode func. For example, if the value of col_1 is 'val_1', then build a select list in col_2; otherwise null in col_2.
I tried to use
select col1,
decode (col1, 'val_1', select htmldb_item.select_list_from_lov(2, first, 'lov1') from dual, null)
from....
where....
But it didn't work.
I'd like to know whether it's feasible to have something like that.
TIA.
Message was edited by:
Luc

You could use a region of type PL/SQL function
returning SQL query to dynamically build this kind of
tabular form. However if you want to use the built-in
multi-row insert, update and delete processes, all
items in a column must have the same display type. Marc, thanks for the quick reply. I appreciate it.
I got your idea. However, I need to have the javascript 'ToggleAll' as the heading so the form works as same as the built-in one. If I put the query definition into a pl/sql procedure, where I can put this html tab attribute? It can not be inside the checkbox function, otherwise the checkbox of any row would act as same as the header.
I hope I've made this clear.
To Vikas: It's our clients who want this, not us. :(

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran K

HI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K

Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
Saras

You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

iTunes is required to initially activate the phone. Back when the iPhone 3G was sold, you would take it out of the box and see a "Connect to iTunes" screen. She HAD to connect to a computer in order to begin using the phone. Does she remember what computer this was?

Error while deleting certificate from key storage in visual admin.

Hi,
I am reconfiguring SSO with our ERP system.
I need to delete certificate of abap system.
when i try to delete certificate from visulal admin>server>services>key storage>ticketkeystore
i get error stating
com.sap.engine.services.keystore.exception.BaseRemoteException:Remote call errored
at com.sap.engine.services.keystore.impl.KeystoreManagerManagementimpl.deleteEntry(KeystoreManagerManagementimpl.java:83)
Pls help
Thanks & Regards
Raj Kiran

I solved it.
Visual Admin > Key Storage service ....
1) Take note of all your Entries under the "TicketKeystore" view. You could export all of your Entries here except for the "SAPLogonTicketKeypair" in case you need this to be replaced by a new one
2) Select the "TicketKeyStore" view and DELETE it
3) Create the "TicketKeyStore" view again. It should be empty now.
3) Recreate the SAPLogonTicketKeypair, and import all of the ones that you exported in step (1)
Hope this helps
Cheers

JList run time errors when removing items from list

Hi there
I am having trouble removing items from a JList. For a While it was working fine and now it outputs runtime errors everytime samething gets removed from the lsit
Here is the code
//declare
public class Consumertab1gui extends JPanel implements ActionListener
     public static JList conList = null;
     private static DefaultListModel model = null;
// Create a list with some items
model = new DefaultListModel();
conList = new JList(model);
//set the size of cells in the list with the length of the string
conList.setPrototypeCellValue("Lenght 1234567890");
conList.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
conList.addListSelectionListener(new ValueReporter());
//set a scroll onto the list
JScrollPane conScroll = new JScrollPane(conList);
add(conScroll,c);
//when the button gets pressed to drop the selected item the following code is called
private void dropConsumer()
int selItem=0;
componentsV.comVRemove(conList.getSelectedValue().toString());
selItem=conList.getSelectedIndex();
System.out.println("No:"+(model.getSize()-1));
System.out.println("S:"+selItem);
remConList(selItem);
dropCon.setEnabled(false);
//which in turns calls this
public void remConList(int pos)
     model.remove(pos);
when the model.remove(pos) code is executed the following runtime errors are given:
java.lang.NullPointerException
at Consumertab1gui$ValueReporter.valueChanged(Consumertab1gui.java:197)
at javax.swing.JList.fireSelectionValueChanged(JList.java:1321)
at javax.swing.JList$ListSelectionHandler.valueChanged(JList.java:1335)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:187)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:214)
at javax.swing.DefaultListSelectionModel.removeIndexInterval(DefaultListSelectionModel.java:546)
at javax.swing.plaf.basic.BasicListUI$ListDataHandler.intervalRemoved(BasicListUI.java:1561)
at javax.swing.AbstractListModel.fireIntervalRemoved(AbstractListModel.java:160)
at javax.swing.DefaultListModel.remove(DefaultListModel.java:478)
at Consumertab1gui.remConList(Consumertab1gui.java:38)
at Consumertab1gui.dropConsumer(Consumertab1gui.java:58)
at Consumertab1gui.actionPerformed(Consumertab1gui.java:46)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
can anyone spot any mistakes in the code or suggest possible resons as to why these run time errors occur?
Thanks
alexis

java.lang.NullPointerException
at Consumertab1gui$ValueReporter.valueChanged(Consumertab1gui.java:197)The NullPointerException occurs at line 197, in the valueChanged method of your ValueReporter inner class. I have looked through your post several times but I don't see where you posted that method. Anyway, that is where you should look.
PC²

How to select value from list with multiple selections ?

HI,
i have a list with multiple selections where i show email address retrieved from database.
what i want to do is to send the selected email address to the invoiceedit.jsp.
please look at the following code which gives you the better idea.
<td class='smalltext'><select name="email" size="3" multiple="multiple">
 <%
 Connection conn = null;
 Statement stmt = null;
 Statement stmt_contactperson = null;
 Statement stmt_address = null;
 try{
 conn = getREConnection();
 stmt = conn.createStatement();
 ResultSet rs = null;
 rs = stmt.executeQuery("SELECT PROPERTYID, VALUE FROM PROPERTIES WHERE ENTITYID="+ g_strGroupID+" AND NAME = 'invoice_default_email'");
 int numofrows = 0;
 while(rs.next())
 %>
 <option value="<%= rs.getString("VALUE") %>" selected="selected"> <%= rs.getString("VALUE") %> </option>
 <%
 }//end of while
 %>
 </select>
 <a href="invoiceedit.jsp?entityid=<%=g_strGroupID%>&add=1">Add</a>
 <a href="invoiceedit.jsp?entityid=<%=g_strGroupID%>&email_to="> Edit</a> </td>thanks

Use a form button instead of a link so that you can send it as a request parameter to the server. In the server side just use HttpServletRequest#getParameterValues() to obtain all values for the given parameter name. If you really need a link rather than a button, then use Javascript to submit the form on click of the link.
That said, your design is bad. Java code belongs in Java classes, not in JSP files. Database access logic belongs in a DAO class. Business and controlling logic belongs in a Servlet class. Only presentation logic belongs in the JSP file. Avoid scriptlets as much as possible and use JSP EL and/or JSTL instead.

UnsupportedOperationException Error while removing object from List

Hi,
I need to remove a set of objects from List if it contains similar objects as the other one.
Follwing is the code snippet of the above scenario...
List selectedPaxList = new ArrayList();
TreeSet seatAssignedPaxlist= new TreeSet();
selectedPaxList.add("1");
selectedPaxList.add("2");
selectedPaxList.add("3");
seatAssignedPaxlist.add("1");
seatAssignedPaxlist.add("2");
if(selectedPaxList.containsAll(seatAssignedPaxlist))
selectedPaxList.removeAll(seatAssignedPaxlist);
If i do this in java program it executes fine without any error.But if I do the same in JSP I am getting the following error......
java.lang.UnsupportedOperationException
at java.util.AbstractList.remove(AbstractList.java:167)
at java.util.AbstractList$Itr.remove(AbstractList.java:432)
at java.util.AbstractCollection.removeAll(AbstractCollection.java:351)
Plz... help me to resolve the issue

java.lang.UnsupportedOperationException
at
java.util.AbstractList.remove(AbstractList.java:167)
at
java.util.AbstractList$Itr.remove(AbstractList.java:43
2)
at
java.util.AbstractCollection.removeAll(AbstractCollect
ion.java:351)
That stack trace looks wrong to me.
ArrayList overrides the remove method, so it
shouldn't be using the method in AbstractList. That's what I thought, too. There is either something missing or it's not an ArrayList. In fact the javadoc of AbstractList.remove sais:
"This implementation always throws an UnsupportedOperationException."
So it really looks like another subclass is used.
Also
the object it is trying to remove is a list (from
your exmaple it should be a String)
I could be wrong.These are just the code references not the parameters, I think.
-Puce

Unable to create a Driver object from driver with Media type string CTC PHO

Hi All,
I am trying to develop a siebel cti adapter for avaya.
I have loaded a custom dll into siebel server but it is throwing error "SBL-CSR-00500: Unable to create a Driver object from driver C:\Mydriver\cti.dll with Media-Type-String CTC Phone ".
It has been long time without any progress.
Please help
Thanks
Nishant

Hi tomhowell,
According to your description, my understanding is that you got an error when you created a site from a custom site template after migrading SharePoint 2010 to your server.
Did you have the original solution file of the site template? Please re-deploy the solution to your SharePoint site, then create a site from the new site template, compare the result.
Also use SPDisposeCheck to indentify the memory leak:
http://archive.msdn.microsoft.com/SPDisposeCheck
http://www.fewlines4biju.com/2012/11/detected-use-of-sprequest-for.html
Here are some similar posts for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3a25eb86-8415-4053-b319-9dd84a1fd71f/detected-use-of-sprequest-for-previously-closed-spweb-object-please-close-spweb-objects-when-you?forum=sharepointdevelopmentprevious
http://social.msdn.microsoft.com/Forums/en-US/50ce964f-94a6-4fda-abc0-caa34e7111f1/error-detected-use-of-sprequest-for-previously-closed-spweb-object-occurs-when-new-site-gallery
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

RFC error "No authorization to send IDOCs with message type ..."

Hi all,
I have now tried just about everything I could think of, applied all the notes mentioned on this forum but still no luck. Can anyone please help ...
I have got a file to idoc scenario, the status in the sxmb_moni is successful, but the outbound processing logs an error. When I go to transaction SM58 I get an error for the user XIAFUSER with the message "No authorization to send IDOCs with message type WPUUMS".
I have tried giving this user SA_ALL access and still got the same error thus concluding that this is not an authorisation error.
Any suggestions?
Regards,
Liesel

Hi Liesel,
The RFC destination that you have put in IDoc communication channel must be present in your SAP XI system, transaction SM59 also.
Please check if the user id/Password that you have given has all the authorization.
Also check the User ID and passwrord in SM59 in R3 and see if a Remote Login is possible.
There is also some configuration by which the clients are allowed / blocked from receiving Idocs from XI. Basis guys can do it for you. Please approach your basis consultant. Hopefully that helps..
Regards,
Abhy Thomas

Error : No authorization to send IDocs with message type MATMAS

Hi All,
My scenario is FILE-XI-IDOC.
I am getting chequered flag in SXMB_MONI,but in that under outbound status I am getting red flag.
When I check in SM58 I am getting message as "No authorization to send IDocs with message type MATMAS".
Do I need to give any authorizations on XI side or on R/3 side?
If so, what is the authorization required?
I could not find the note :837595.

You use the IDoc Adapter in the Exchange Infrastructure and you try to use the IDocs to receive or send data. For these IDocs, an attempt is made to load the IDoc metadata from an R/3 reference system with an SAP NetWeaver Release lower than 6.20.
This occurs either at runtime, whereby the relevant messages run into 'System error' status, or when you use transaction IDX2 during manual loading of the metadata. In this case, the reference ystem is called by RFC and the logon user of the RFC destination does not have the necessary authorizations for determining the metadata.
Solution
In transaction PFCG, extend the role of the logon user by adding the following authorizations:
Authorization object S_RFC
 Field name RFC_TYPE value FUGR
 Field name RFC_NAME value EDIMEXT, SDTX
 Field name ACTVT value 16
Authorization object S_IDOCDEFT
 Field name ACTVT value 03
 Field name EDI_CIM value ' '
 Field name EDI_DOC value TXTRAW01
 Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
 Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
 Field name ACTVT value 03
 Field name DICBERCLS value
from the note mentioned above.
Regards
Bhavesh

Workflow Ends in Error " No auth to send IDocs with message type ORDRSP"

Hello All,
I have created an RFC user with limited Authoprizations including WE* tciodes and a few ME* transactons for an ALE Set up. I want to make sure i would not be giving more authorizations (extensive) to this RFC user and assign Just required authorizations. So i started testing testing and the inbound IDOC ended in error with a message " No auth to send IDocs with message type ORDRSP" Message no. SR053. Is there any way to find out what is the missing authorization object for the User. Any inputs would be really apprecaited.
Br,
Sri

Hi !
Becaus alle this happens in beckgound, things are a bit difficult but solvable....
What you should do is a "Authority trace" ... as follows....:
- Go to the ST01
- Mark "Authorisation Check"
- Swich the trace on for your Workflow user
- Execute the Workflow until the error uccurs
- Go back to the ST01
- Press the "Analyze" button and see what error occurs
Dont forget to swicht the trace off... otherwise the tracefiles become realle BIG !
Regards
rainer
Some Reward poins would be nice if that helped....

Error: Validity of Certificate from list with PSE type PSE ends in 3 da

Similar Messages

Maybe you are looking for