Error variable could not be replaced

friends
we recently went through upgrade to 3.5.
after the upgrade we are having problems in executing queries.
one such error says "error variable 0Fyear could not be replaced"
bascially we have sap exit variable which brings fiscal year. and we have defined offsets on it so that it brings previous two years.
initially when i enter selection in variable screen i get the message saying error variable 0FYEAR could not be replaced and when i still execute the query i get the result but it shows up the same value for all three years.
looks like its not taking offsets.
do u think its got something to do with the variable. since its sap exit variable ?
thanks

Bhanu
as you said it could be because of fiscal year variant.
after upgrade when i am trying to run a query on my multiprovider i am getting error message saying
Determination of characteristic Fiscal Year Variant is not permissible
and in description it says
in a multiprovider a characterstic value can only be uniquely determined for a character if its been set to same value in all data providers.
it says one of the cube is not defined with Fiscal year period Z1 (this is the value in all other cubes) and has to be defined.
i have a multiprovider which is actually pulling data from 4 cubes. as per the procudure given from the error message this is what i have done
infocube definition---time charactersticsextras-structure specific properties of infoobject.
under constant column i have Z1 value for fiscal year variant. i deleted this value for the multiprovider. and i was able to run queries on the multiprovider.
for all my cubes in update rules fiscal year variant is defined as constant Z1. but still under structure specific properties of infoobject in respective infocube i see it only for 3 cubes and for one cube its missing.
now since this problem came up the other solution what i have is to set Z1 for all the cubes under my multiprovider.
though the system is open the column constant is greyed out. and i actually tried to transport from dev but for some reason i am not able to.
for all my cubes in update rules. fiscal year variant is defined as constant Z1.

Similar Messages

  • Layout: Error UPP_LB062 Variable could not be replaced in row

    Hi everyone,
    I'm quite new in Planning and tried to create a simple manual planning layout in SEM-BPS on a BI 7.0 system, using two characteristics as lead columns and three characteristics as header.
    For one of the characteristics (Calendar year/month) in the lead columns I tried to enter a variable (settings: characteristics=Calendar year/month; text replacement=medium; replacement type=fixed value; restictions of values required by user=true; selection conditions=some values of Calendar year/month)
    but after selecting the variable name it is deleted from the row and the error message UPP_LB062 appears with thext "Variable ... could not be replaced in row"
    Do you have any idea what is wrong here?
    Thanks a lot for your help!!
    Thomas

    All I needed to do was to execute "Set Variables in order to select values for my user.

  • Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

    Hi all,
    I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
    I am having a variable named filename and archivefilename and two fileconnections  one is originalfiles and archivefiles
    archivefilename=replace( @[User::filename],"datafiles","archive")
    orginalfiles connection is an expression =@user:filename
    archivefies connection is an expression=@user:archivefilename
    the filename comes from reading the folder that contains those files
    public void Main()
                string[] filenames;
                filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
                Array.Sort(filenames);
                Dts.Variables["filelist"].Value = filenames;
                Dts.TaskResult = (int)ScriptResults.Success;
    The folder c:\luminis\archive\ exists
    why I am getting this error
    My filesystem task : destinationpathvariable =false
    destinationconnection:archivefile
    overwrite=true
    operation=movefile
    issourcepathvariable=false
    sourceconnection=original file
    why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
    sohairzaki

    there may be 2 problem...
    1> specify a target directory only, not with the file name. 
    OR
    2> Try using the unc,path format \\computername\sharename\
    let us know your observation...
    Let us TRY this | Mail me
    My Blog :: http://quest4gen.blogspot.com/

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • Error 1406.Could not write value Adobe ARM

    Hi all,
    I have tried to install the new version of Adobe Reader XI, but I keep getting the following error messages.
    I have tried to follow suggestion by others on the web as to how to sort this problem out.
    I have uninstalled adobe reader and restarted the computer.
    tried to download again but still get the error message.
    The full error message I got was,
    Error 1406.Could not write value Adobe ARM to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
    I went to the registry HKEY_Local_Machine and then to the above location.
    in the right hand side of the registry editor is listed ADOBE ARM   "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe"
    I have tried to delete this entry but my system wont let me.
    I am running Windows 7 ultimate 32 bit
    I have 4 Gb RAM
    I have an Intel core2 Quad Q6600 @2.40Ghz
    I run Zone Alarm Extreme Security with virus protection.
    I hope someone can help as I want to install Adobe Reader.

    Truthfully, I don¹t know the difference.
    Okay here is what happened:
    I purchased a new Mac because my old one was on the fritz.  They put all of
    my old programs on my new computer including my old Adobe Acrobat 7.0
    Standard.  Since I purchased a newer computer, I gave the old one to my
    assistant.  But the Apple people replaced the hard drive on the old one, so
    none of the old programs were in the system.  I purchased Adobe Acrobat XI
    Standard for the new computer and figured I could just reload the old
    acrobat on the old computer. But I had to buy new windows and parallels
    programs in order to get the parallels program to work on the old computer.
    Here¹s what it looks like:
    New Computer:
    Old Windows
    New Acrobat
    Old Parallels
    Old computer
    New Windows
    New Parallels
    Old Acrobat
    How much more messy could this get?
    Maybe I should put all of the old stuff on the old computer and all of the
    new stuff on the new computer?
    Or, maybe I should just update everything? Prior to this everything worked
    fine. . .
    But, what do you think?
    Dionne L. Wade, Esq.
    Law Office of Dionne Wade
    1301 Main Avenue, 2nd Floor
    Clifton, New Jersey 07011
    Office 973.340.4662
    Fax: 973.340.4775
    INTERNET CONFIDENTIALITY NOTICE:
    This transmission is intended only for the use of its indicated recipients
    and may contain information that is privileged, confidential and exempt from
    disclosure under applicable law.  If the reader of this transmission is not
    an intended recipient, you are hereby notified that any dissemination,
    distribution or copying of the transmission is strictly prohibited.  If you
    have received this transmission in error, please immediately notify us by
    telephone (collect call if long distance) and/or by e-mail, delete the
    transmission from your system and destroy any printed copies which you may
    have made of the transmission.

  • Cannot open pfd files error 1606 could not access network location %APPDATA%/

    Error 1606 could not access network location %APPDATA%/
    I have adobe reader 8.1.3 installed and cannot uninstall it as i get the same error message as when i try to open files or download the new version. When I type %appdata% into run nothing comes up. I have been through lots of other threads and cannot find a solution so ive made my own please help!

    You can download the Windows Installer Cleanup Utility from here http://support.microsoft.com/kb/290301/ - run the downloaded installer, then start the
    program from Start | Programs | Windows Install Clean Up.  Select Adobe Reader, then click 'Remove'.
    N.B. I've heard that this program can cause problems if Office 2007 is installed; don't use it if you have Office 2007!
    The above tool helps you to uninstall Adobe Reader, but it will not fix the basic problem with the corrupt %APPDATA% environment variable.  You can try to fix it with http://fixitcenter.support.microsoft.com/
    P.S. this software is still beta; I strongly recommend to make a System Restore Point before proceeding.  Let us know if you need any help with this (and please state your Windows version if you do).

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • Error: "Document could not be saved"

    Hi all!
    I regularly receive an error, "Document could not be saved", in OS X after a while of usage. It can come after 10 minutes of usage, or after 10 hours of usage. It affects ALL open applications and documents, and doesn't solve with anything but a restart of the entire system. I haven't found any relation to working with any specific application – it seems to happen at random while using any application. And as I said, it affects the entire system and all applications once it happens.
    I've also tried this solution (posted elsewhere), but with no luck:
    Restart Lion, and Before you hear the chime, hold down Cmd + R, to access Lion Recovery.
    Click the Utilities item in the Menu Bar, then click Terminal.
    In the Terminal window, type resetpassword and hit Return.
    The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
    At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
    Does anyone know of any other solution to this problem? Or does anyone know the reason for it?
    I should also mention that I experienced another problem recently, whereby my computer begun to sometimes (but not always!) show a progression bar at startup. This bar could take between 5-15 minutes to finish. This kept happening for maybe two weeks' time, until finally one day the computer wouldn't startup at all. It would come to show the dark grey Apple logo on the light grey background, and then suddenly shut off before reaching any further. I did a complete wipe out of the hard drive and re-install of the system, and since then haven't experienced the "progression bar"-problem anymore. I read somewhere that this problem could be a sign of harddrive failure or damage, but I still wonder if that is correct. Could the above mentioned "Document could not be saved"-problem also be related to a hard drive damage?
    Thanks in advance for your assistance
    Regards
    Alex

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HELP ME!!!! itunes wont open, error says could not open key......

    I attempted to update itunes to the newest upgrade, and the upgrade was unsucceful, and now this error comes up everytime i try to open itunes (it wont open at all). the error says
    Could not open key:
    HKEYLOCALMACHINE\Software\Classes\.wav\OpenWithList\iTunes.exe.
    Verify that you have sufficent access to that key, or contact your support personnel.
    This makes no sense since this is on my home PC

    hmmm. okay, if you're currently just getting the "itunes has encountered an error ..." let's try the following technique.
    preliminaries
    download and save a fresh copy of the itunes 6.0.1.3 installer to your hard drive. (eventually we're going to run the install from there rather than online.)
    iTunes 6.0.1.3 Installer
    switch off any antivirus and antispyware applications prior to any uninstalls, installs or repair installs.
    uninstall
    use the complete uninstall instructions given in the following document to remove your existing itunes and quicktime:
    Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
    ... and if you run into problems on the uninstall, try using the Installer Cleanup utility:
    Description of the Windows Installer CleanUp Utility
    reboot after uninstalling.
    reinstall
    remember to switch off your antivirus and antispyware.
    reinstall itunes using the 6.0.1.3 installer you downloaded previously.
    if you get the "itunes has encountered a problem ..." error message again after that install, first check to see if your Quicktime will launch. if you get an error message when you try to launch quicktime, try using the following technique:
    iTunes 6 for Windows unexpectedly quits when opened
    keep us posted on your progress.
    love, b

  • VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

    Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    Hello All,
    I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues. 
    Any suggestions on the issue i am facing
    error is :
    could not read result repository: unknown transaction id in results:
    or
    could not read result repository: unknown request id in results: 
    Thanks
    Satish

    Hi Kotapati,
    >>Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
    If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
    In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
    If possible, I suggest you could share me simple load test for us so that we will further help you.
    You could upload your load test to OneDrive and then copy link here.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When I try to save a photo, I get error message Could not complete your request because of a program error.  What's wrong?

    I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error."    I exit Elements, try again, same error. 
    In past I had this problem but it resolved when rebooted PC.  This time, PC reboot does not help.
    I cannot save anything i do in elements!!
    What's wrong?  Any suggestions how to fix this?   Anyone know what the program error is

    Please mention your PSE version and underlying OS.
    Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
    Regards
    Kishan

  • Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
    The platforms don't matter, but you still need file transfer that doesn't corrupt files...

  • While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

    I have restored one web application in SharePoint Server 2010 from a different domain and  can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
    that  "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
    What may be the reason? Please help me to solve this issue since I am stuck up on this .
    Regards 
    Mine1981

    Hi Nico
    Martens,
    Thank you for your reply. But
    how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
    Please help me to solve the
    issue.
    Regards
    Mine

  • TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

    I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
    I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

    Hi, I disabled the antivirus and the firewall. Same result
    I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
    Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
    My iphone 5 is not jailbroken, and is a factory unlocked phone.
    Any other suggestion?
    Pls help

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

Maybe you are looking for