Error: Vendor 500075 does not have a bank account in transaction currency

Hi Experts,
I am getting a hard error while trying to post Vendor FI invoice.
Error: Vendor 500075 does not have a bank account in transaction currency
Message no. Z0066
Please advise.
Regards,
Simar

Hello,
Please check ob28 ( or ggb0 ) to see if you are using any validation rule to this process. This message Z0006 seems to be
a custom message defined by your company.
Regards,
REnan

Similar Messages

Reactivating users via pwpolicy gives error "User does not have a shadowhash account"

Hi All,
I've got a OS X (10.8) server running Open Directory and File Sharing. We deal with a lot of free lance people so accounts are often being deactivated and reactived.
A user is first created by submitting to an internal form that starts an applescript that creates the user account, password, and sets a hardExpireDateGMT that disables the account on the individual's out date. It also adds them to specific file sharing groups etc. This works perfectly for us.
Our problem stems from when we "re-hire" people. Again an internal form is used to start an applescript. This script searchs the OD for the user to make sure they actually have been in the system. If it finds the user it sets a new temp passoword, updates any contact info, and then uses "pwpolicy -enableuser" to reenable the user. Our error occurs at the last step during the "enableuser". We get the error "User <username> does not have a shadowhash account>"> However, we can manually enable the user through Workgroup Manager.
Is there a way to create the shadowhash account via the command line? Or is there a better way then pwpolicy to reenable the user?
Thanks!

Hi,
Here are a few Microsoft articles that provide the suggestions to troubleshoot this issue below:
Error: The security database on the server does not have a computer account for this workstation trust relationship
http://technet.microsoft.com/en-us/library/ee849847(WS.10).aspx
Domain Controller does not allow interactive logon, shows error “The security database on the server does not have a computer account for this
workstation trust relationship"
http://support.microsoft.com/kb/2015518
But if you cannot log onto the Windows Small Business Server with administrator permissions, it is hard for us to troubleshoot this issue. You may need
to restore the system from backup. For the detailed steps, you may refer to the following Microsoft TechNet article:
Recover the Operating System or the Full Server
http://technet.microsoft.com/en-us/library/cc794282(v=WS.10).aspx
Regards,
Arthur Li
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected] .
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Loans document error Document header does not have a reconciliation key

Hi All,
I am trying to post a loans document through EK25 and while saving the document following erros is coming
Formal error: Document header does not have a reconciliation key
Message no. >0037
Diagnosis
You tried to post a document but a reconciliation key is missing from the document header. Since mass processing does not apply here (where the reconciliation key is automatically created) you must enter a reconciliation key.
System Response
Error message. Processing is terminated.
Procedure
Contact your system administrator.
Procedure for System Administration
If the program error occurred in an
SAP standard program, enter a problem message
Own program, correct the program
Any input appreciated.
Thanks,
VR

Hi,
You need to assign the reconcilation group to the SAP user ID you are using to post the loan document.
The reconciliation group is required if user-specific reconciliation keys are to be proposed automatically.
The reconciliation group is freely selectable.
Go to the following path in IMG-
IMG->Financial Accounting->Contract Accounts Receivable and Payable->Basic Functions->Postings and Documents->Document-.Define Default Values->Maintain Rules for Reconciliation Key Default Values->Maintain Reconciliation Groups for Default Values
Maintain the SAP User ID that you are using along with a reconciliation group.
After, you maintained the user ID and saved it, try to post the loan document again.
Hope it helps..
Thanks,
Amlan

Every time I try to access iTunes Connect, I got this error: Apple ID does not have permission to access iTunes Connect.

I had register at iOS developer program. But every time I try to access iTunes connect, I got this error: Apple ID does not have permission to access iTunes Connect.

Hi any luck with this? I have a developer program as well but still shows same msg as above.
Thanks in advance.

Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard

Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard
Regards,
Amar

See the "More Like This" section over there ===============>
In the future, search before posting.

Getting Error: Config file does not have IDStore WLS Administrator Username

I am configuring OIM/OAM in HA mode following the EDG:
- Enterprise Deployment Guide for Oracle Identity Management
- 11g Release 1 (11.1.1.5)
I am at step
- 10.4.5 Creating Users and Groups for Oracle WebLogic Server
I am executing this command:
- idmConfigTool.sh -prepareIDStore mode=WLS input_file=wls.props
Where wls.props has these values:
IDSTORE_HOST: admin.mycompany.com
IDSTORE_PORT: 389
IDSTORE_BINDDN: cn=orcladmin
IDSTORE_USERNAMEATTRIBUTE: cn
IDSTORE_LOGINATTRIBUTE: uid
IDSTORE_USERSEARCHBASE: cn=Users,dc=mycompany,dc=com
IDSTORE_GROUPSEARCHBASE: cn=Groups,dc=mycompany,dc=com
IDSTORE_SEARCHBASE: dc=lispa,dc=local
POLICYSTORE_SHARES_IDSTORE: true
and I am getting this error:
Config file does not have IDStore WLS Administrator Username
Any idea why ?

I have added to the property files:
IDSTORE_SYSTEMIDBASE : cn=systemids,dc=mycompany,dc=com
But its not solving the issue.
Here is the log:
Jun 3, 2013 10:01:55 AM oracle.idm.automation.util.Util setLogger
WARNING: Logger initialized in warning mode
Jun 3, 2013 10:01:59 AM oracle.idm.automation.impl.oid.handlers.OIDIntegrationHandler validateInputParams
SEVERE: Config file does not have IDStore WLS Administrator Username
Please advise on how to resolve this issue

PSCS5 Error 22: Window does not have a constructor.

I am having a problem running scripts in PS CS5.
When I try to run the load files into stack script, which works fine on CS5 on my laptop running Windows 7 64bit.n (i7 Processor, 4gb Ram)
I am running the same operating system on my main pc (i7 Processor 6gb ram), and am using the 32bit version of PSCS5.
For some reason however I get the following error when trying to run the load files into stack script.
Error 22: Window does not have a constructor.
Line.388
-> var w = new Window(res);
I have tried trashing my preferences and reinstalling photoshop but neither has worked.
Any suggestions on how to fix would be welcome.
Regards
Robyn

Something similar has come up in the Mac-Forum:
http://forums.adobe.com/message/2982064#2982064
Might not be of use to you, though, but it seems to have been solved somehow …

CS5 - Error 22:Window does not have a constructor

I've been experimenting with some old sccripts on the Photoshop CS5 pre-release and they seem to work fine except any that have a user interface.Scripts that run fine on CS2, CS3 and CS4 throw a "Error 22:Window does not have a constructor" error message. I was wondering if anyone else had noticed this and if they were aware of any changes as regards to scripting with CS5 and also how to correct the issue.
CJ

Dear All,
I have been bothered by this same Photoshop error 22 when trying to use the Photomerge feature or any other of the Automate features in CS5.
My computer is a Windows 7 32bit machine but this should definitely apply to Windows 64bit machines and possibly the same logic may apply to Mac but I do not know.
I didnt find a permanent solution but I did find a temporary fix which will at least allow you to use the function for one opening of the program however if you close and reopen photoshop the problem returns.
Temporary Fix Instructions:
1. Locate the file "Adobe Photoshop CS5 Prefs.psp" on your computer and delete it or move it elsewhere. (I assume by doing this you may lose *** of your photoshop preferences but it will allow you to use photomerge and HDR so you choose)
2. On Windows this file can be found in the User folder under C:\**USER NAME**\AppData\Roaming\Adobe\Adobe Photoshop CS5\Adobe Photoshop CS5 Settings\ (Replace **USER NAME** with the Windows 7 account user name)
3. After deleting this file or temporarily moving it out of that folder you can then open Photoshop CS5 and use the Photomerge feature as much as you'd like.
4. As soon as you close Photoshop CS5 the program automatically makes a new Adobe Photoshop CS5 Prefs.psp file so when you try to reopen the program it will not work again.
I hope this may be helpful to some people and I hope that Adobe can fix this issue, I have not and dont plan on submitting this as a bug report to Adobe, being that I do not personally own the program (still in 30 day trial) but anyone who would like to, please feel free to do so.

Error 22: Window does not have a constructor.

Hi
I am getting the following error message when I try to run scripts in PSE11, including the PSE scripts like PhotoMerge. I have tried reseting my preferences, rebooting my mac, rebuilding the db3 file, and reinstalling the action. None have worked. These actions did work before. Does anyone have any experience or advice to offer on this one please? Thanks, Jo
"Error 22: Window does not have a constructor.
Line: 30
-> var dlgwin = new Window('dialog', 'Supply Tracker',);
This arises when running the CDW Supply Tracker script, which was working fine.
thanks in advance, Jo

I seem to have fixed this by deleting the preferences. At first holding cmd-opt-shift whilst starting PSE editor was not giving me the delete preferences option, but I found there was a sneaky version of PSE editor running and hiding on my mac, and once I forced it to quit, and restarted the Mac, I was able to use the above way of deleting the preferences.

Error 22: Window does not have a constructor. when opening photomerge . panorama ??????

Whats up???   Error 22: Window does not have a constructor. when i select photomerge / panorama on my imac.    ( elements 11)

Try resetting the PSE preferences by
   1. Close Elements.
   2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
   3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
One of the similar threads is found here http://forums.adobe.com/thread/622755 which is for Photoshop but should work for PSE as well.
Thanks,
Garry

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

Document Sequence Information Does not Exist for Bank Account

Hello,
Oracle E-Bus Suite: 11.5.10.2
OS: Windows 2003
We are facing the problem while executing the ARPLABIM - Bank Statement Import program, 'Document Sequence Information Does not Exist for Bank Account'.
We have already reviewed Oracle Metalink Document: Document Sequence Information Does not Exist for Bank Account: Doc ID: Note:147773.1.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3345134018905587318::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,147773.1,1,1,1,helvetica
But the profile option Sequential Numbering cannot be set to Not Used due to certain funcational limitations. Please advise any other workaround.
Thank you

Adith,
There are only two options:
1. Setup document Sequence. OR
2. Change the profile either the user level who runs this program (assuming a batch user name) or at the resp or application level. Not necessarily at the site level.
Thanks
Nagamohan

My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.

My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.

How to use multiple iPods, iPads, or iPhones with one computer

Cant login to itunes anymore, Keep getting error Apple ID does not have permission to access iTunes Connect.

Cant login to itunes anymore with any of my iphones. I have 3. Now I get an error with the following for any phone I try: Apple ID does not have permission to access iTunes Connect. I have 2 separate Apple Id Accounts for each phone, both get the same error.
My password is correct and so is my apple id. Nothing has changed since I first set it up a long time ago. Worked fine in October.
Anyone have a clue what to do?
Dont even get the option to sync anymore....doesnt highlight.

See the "More Like This" section over there ===============>
In the future, search before posting.

Error message: $host does not have a method 'resetDataPermsCheck'

LiveCycle Designer 8.05.
I am trying to reset the data in a subform. It is working great in certain subforms in my form. However, some of the code is as follows:
if (form1.P1.docSF.new_revision.rawValue == "0") {
// do something
} else {
xfa.host.resetData("form1.P1.newdoc_numberSF");
With this code, I receive an error (in the Warnings panel) that says "$host does not have a method 'resetDataPermsCheck'", yet the subform fields still reset properly. If I move the "xfa.host.resetData..." line out of the "else" section into the "if" section, the error message goes away.
Any idea what might be going on?

Welcome to the forum.
Could someone point to the cause of the error.Could you please mention the complete error message ( the ORA-xxxxx code ) and your database version ( the result of: select * from v$version; )

Error: Vendor 500075 does not have a bank account in transaction currency

Similar Messages

Maybe you are looking for