Error:verifier jar file not found

Hi,
I found problem "verifier jar file not found" while building a package in Aspects Developer Evaluation version.
Pls guide me regarding my problem if any body could.

Include the offcardverifier.jar file in your classpath, you will find this file under $java_card_kit-2_2_2\lib
Regards,
Amr.

Similar Messages

Aspects Developer "Verifier jar file not found error"

Hello all.
I'm working in a Java Card project and I have some troubles.
When I tried to compile, verify and load my solution in Aspects Developer's Software, I achieved the following error message: " could not found Verifier jar file".
So I couldn't test my applet nor simulate it.
Then I compiled myself (with Java Card's commands) and execute the verifier file provided with Java Card, and all was good, so i decided to test my java card applet on the simulator or the real card, both with Aspects Developer SW.
Then the error I got was "Read past end of stream".
What am I doing in the wrong way?What can I do test my applet in a Simulator?
Thank very much for your help.
Regards.
Mike L.

Hi,
This error message indicates that an incompatible version of the Java JDK is being used with Developer.
The release notes distributed with Developer are a little misleading. Currently Developer supports Java JDK versions greater than 1.2.2 but not 1.4.x. For example, I have JDK 1.3.1_06 installed on my machine.
Developer currently supports JavaCard development kit 2.1.2 and this specification restricts the versions of JDK that can be used. For more detail look at JCDevKit_User_Guide.pdf which can be found under <JAVA_CARD_INSTALL_DIR>\java_card_kit-2_1_2\doc\en\guides
Cheers,
Alasdair

I reinstalled my OS as I do every year or so. when I install CS4 I do not have Premiere Pro Adobe Premiere Pro Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists

Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists and that you can access it.

And what exactly? You have not provided any system info or other details.
Mylenium

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder. 
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the browser.cache.disk.enable pref on the about:config page to verify that the disk cache is enabled (should be true).

Error 1311, Source file not found, measurementstudio5.cab

I'm installing Measurement Studio for Visual Studio 6.0 and I encounter: Error 1311 Source file not found, measurementstudio5.cab
Any ideas?

Hello David,
I am also experiencing an Error 1311, but during the install of LabVIEW 2012 and 2013 (64-Bit).
Win7 x64, Acer laptop.
First problem I encounter is:
After putting in my info and agreeing to the licence agreements, the first error pops up says the followign:
NI LabVIEW Run-Time Engine 2011 SP1:
Error 1310. Error writing to file: Crogram Files (x86)\Internet Explorer\Plugins\LV2011ActiveXcontrol.dll. Verify that you have access to that directory.
Options: Abort/Retry/Ignore
Things I've tried:
Retry button--never get's past the error.
Uninstalling Internet Explorer and restarting--Still assumes that it's there, and error remains.
Reinstalling updated Internet Explorer and restarting -- no change.
Checking the directory file and verifying that permissions for every user and System is set to full control -- No change.
The only way to get past this error seems to be to press the Ignore button.
A few moments after ignoring the first error, another error pops up. It says:
NI Labview Run-Time Engine 2011 SP1:
Error 1311. Source file not found: C:\Users\[my U/N]\Desktop\National Instruments Downloads\LabVIEW 64-bit\2013\Products\LabVIEWruntime_mft.cab. Verify that the file exists and that you can access it.
Options: Retry/Cancel
Things I've tried:
Verifying that the file exists (it does) and that I have access to it (I do) and checking the permissions to verify full control --no changes.
Retry -- does nothing.
Cacel --aborts the installation and indicates instal failure.
Can you help me with this? I've installed LV on two other computers and they worked fine, but my laptop simply doesn't want to take the install.
Thank you in advance,
Thomas

ERROR 1311: Source File Not Found. Data1.cab

Hi
Trying to install upgrade Acrobat Pro XI on Server 2003. We already have Acrobat Pro 9 installed.
Install starts and is halted midway by message "Error 1311: Source File not found. Data1.cab. Verify that the file exists and that you can access it."
Heeeelp me please. Thanks

See the following help document:
Errors 1311, 1335, 2350 :
http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html

Error 1311 Source file not found

Hi.
I have tried to repair my Adobe Acrobat 9.0 because it's not working. I got Error 1311 source file not found.
then the following path c\ProgramFiles(x86)\Adobe\Acrobat9.0\Setup\Files\{AC76BA86-1033-F400-BA7E-000000000004}\D ata1.cab
Verify that the file still exists and that you can access it.
What do I do now? I can't open any PDF files from the net.
Also, I have rec'd the following: Unable to find Adobe PDF resource files.
C\ProgramData\Adobe\AdobePDF\Settings\*.joboptions Then it said you must have administrator privileges to install these files. Contact your local administrator. How do I do this? I am the administrator on my home computer!

Thank you Pat.
A couple of things...
First off I am disabled and sometimes a little slow on the uptake.
Subsequent to my first query, I was successful in downloading the Adobe
Reader XI. However it only allows me to view PDF's that reside on my
computer. If however I want to look at any docs on the web or that people
send me via e-mail I cannot see them They flash for a moment, like a tease
and then say there was a catastrophic crash with not much after that.
If I follow your instructions below, I presume that I will be deleting the
A R X1 as well and as it was very very difficult to get it is the first
place, would you be able to help me with a reinstall?
I think what happened is that my grandson did a "cleanup" on my computer
and deleted only parts of programs...and thus the part that are missing
will not allow for the subsequent updates.
So...thank you for your patience and confirm that I should uninstall and
using the cleaner and then reinstall using the links you provided?
Thank you so much!
Sass
On Wed, Oct 29, 2014 at 1:40 AM, Pat Willener <[email protected]>

Error 1308.Source file not found

During installation of Desigtime Component of Identity Manager I get an message:
"Error 1308.Source file not found: C:\Identity Center\DATA_UNITS\IC_DESIGNTIME_71\Setup\program files\SAP\IdM\Identity Center\...\Windows-Change authentication method for RSA Auth Mgr user.dept. Verify that the file exists and that you can access it."
Then I have option to Retry (which does not work); Ignore or Abort.
Please help
Edited by: Junaid Maniya on Dec 31, 2009 8:22 PM

Hello
Sounds like you got a corrupt installation file.
Step 1: Download it again from SAP
Step 2: Extract with 7-zip

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Error 1308.Source file not found with 9.4.2 Admin Install point

I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?

I am having the same problem, all the relevant info was already covered in the "thewaker" post above.   I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
    Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks.

OMF Error 139 ( mob file not found)

Just in case anyone else encounters this problem... I've seen posts about it in the past, but I'm not sure it ever got answered. I got error 139 when trying to export an OMF from 7.2 - long story short, the problem turned out to be that I was trying to make an OMF that was bigger than 2gig. It was 2.01 gig. Apparently the old 2gig file size limit still applies to OMFs in Logic. I don't know why. The workaround was to split the song into 2 sets of audio files and make 2 OMFs. In response to earlier discussions of error 139, having 24-bit files was not a problem, nor was files from different volumes/locations.
Also, this may have been suggested before, but if you are having trouble importing or exporting an OMF of a very long session, note that Logic has a limit on how long a song file can be, but that the limit is in BARS(2158 bars), not TIME, so you can always use a slower tempo (i.e. 50% or 25% of actual tempo if you want to maintain a relationship to the click) to make your session longer in time but not in bars. Maybe we won't need workarounds by the time Logic 8.0 comes out. But I'm not complaining, I think 7.2 is the best Logic ever and I've been using it since...um.. well, since Notator.

hello folks,
I have Windows XP home Firefox v1.0.6.
removed old java in Add/Remove programs.
cleared the "Temporary Internet Files" folder that contained C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5.
tried to load jre-1_5_0_04-windows-i586-p-iftw.exe for the third time, and the install still hangs up.
J2SE Runtime Environment 5.0 Update Installer Information : Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\2XFKL4VY\je150000[1].cab. Verify that the file exists and that you can access it.
and,
Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\EEIDPHGA\jp150040[1].cab. Verify that the file exists and that you can access it.
here's the thing, I cannot surf to "Content.IE5" folder in my "Local Settings\Temporary Internet Files" folder, but I can plug in the directory in the address bar of Windows Explorer & see the "Content.IE5" folder.
I do not see "je150000[1].cab" or "je150000[1].cab" in there.
Am I using the wrong program to fresh install Java for Firefox in XP?
Is there something wrong with my operating system?
monitoring this thread.....
thanx.

Error 1311 Source file not found? Plus another error. I need help bad!

Error 1311. Source file not found. S:\Documents and Settings\Owner\Local Settings\Temparary Internet Files\content.IE5\45UJKXYZ\ja150000[ 1 ].cab. Verify that the file exists and that you can access it.
That appears when trying to install Java 5 update. What can I do to fix that?
This is another error I've got.
hs_err_pid424 error
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x64DAD49
Function=Java_sun_awt_windows_WToolkit_printWindowsVersion+0x1CB9
Library=C:\Program Files\Java\j2re1.4.2_08\bin\awt.dll
What's those mean and how can I fix them? Plus after installing J2re1.4.2_08 I get a fuzzy looking screen and lines look doubled or outlined some.

hello folks,
I have Windows XP home Firefox v1.0.6.
removed old java in Add/Remove programs.
cleared the "Temporary Internet Files" folder that contained C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5.
tried to load jre-1_5_0_04-windows-i586-p-iftw.exe for the third time, and the install still hangs up.
J2SE Runtime Environment 5.0 Update Installer Information : Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\2XFKL4VY\je150000[1].cab. Verify that the file exists and that you can access it.
and,
Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\EEIDPHGA\jp150040[1].cab. Verify that the file exists and that you can access it.
here's the thing, I cannot surf to "Content.IE5" folder in my "Local Settings\Temporary Internet Files" folder, but I can plug in the directory in the address bar of Windows Explorer & see the "Content.IE5" folder.
I do not see "je150000[1].cab" or "je150000[1].cab" in there.
Am I using the wrong program to fresh install Java for Firefox in XP?
Is there something wrong with my operating system?
monitoring this thread.....
thanx.

Error 1311 - source file not found...m182.cab

Good Morning,
I am trying to reinstall Crystal Reports XI on a blade server and the installation will not complete. I receive message, "Error 1311. Source file not found: Z:\win32\m182.cab. Verify that the file exists and that you can access it."
I did a complete uninstall of Crystal Reports and removed the Crystal folders from program files directory as well. Is this a file that may be downloaded"
Thanks,
T.I. Walker
Clarendon Health Systems

Crystal Reports XI has 2 disks that I am using. It never completes installing from disc1, this is when the error occurs. It never advances and prompts to install disc2.
thanks

Hypervisor: Create Standalone Real-Time Application (Error at deploying: File not found)

Hello,
I am using Hypservisor. With "Build Specifications" in the project explore I want to create a standalone real-time application.
In my first try I only want to print some texts onto the real-time console (HyperTerminal) using the function "RT Debug String.vi". I built the real-time application successfully and got the rtexe-file locally on the windows system. But as I tried to deploy the application to the target system, I got the error: "File not found". Please check the attached file "error.txt" for details.
I don't understand which file is not found. Or I used "\" as path separators. Is it wrong? I'd appreciate if you'd have any idea of the problem. Thank you very much.
Regards,
Scarletice
Solved!
Go to Solution.
Attachments:
ERROR.txt ‏1 KB
builds.zip ‏153 KB

Hello Casey,
Thank you very much for your reply and your interest in our project. We are using Real-Time Hypervisor for the setup of our test stand. We use the Windows system to show the GUI and the Real-Time system for the real-time machine control and online data storage. We use shared variables and shared memory for the data exchange between the two systems.
The system works generally quite fine now. But we still have to face new problems at each step forwards. I'm sure, I'll have more questions. I'd appreciate your advices. Thanks sincerely.
Best regards,
Scarletice

SMD uninstallation error "ORADBPAR.XML" file not found.

Hello Experts,
I was doing System preparation in solution manager through Solman_setup.In step 6.5 I came across Install Diagonostic agent .I checked in my system that older version of SMD is installed that may cause problem in future so I decided to uninstall it and install newer version of SMD7.3.I downloaded the SMD file and started sapinst with sudo access to uninstall it.Now I am getting an error saying ORADBPAR.XML file not found.I checked for this file but I could not find .Plz help me out to find this file and resolve the issue.
Thanks
Aditya Roushan

Hi Carole,
I had older version of SMD(7.01) installed in my system.I tried uninstalling this with sapinst downloaded with SMD7.2 so i got this error.I had to download the SMD7.01 from market place (you willl get this in archive) and then uninstall the SMD using this sapinst (which came with 7.01 version).i could do this successfully.Hope this will help you
@Jose:Thanx for ur reply but using sudo had no problem.I uninstalled older SMD7.01 and installed SMD7.2 using sudo privilege only.
Thanks
Aditya Roushan

Error:verifier jar file not found

Similar Messages

Maybe you are looking for