Error "Video System Error: Unknown message: bindSuccss" when trying to play a movie in LR 5.3

Hi,
I'm getting the error listed in the title of this thread when I try to play a video. any ideas?
Dan

I have to say Im a little confused to. Following the steps outlined:
Desaturate in LR.
Export as a JPG (add to this catalog selected- for reimport)
Select image. Switch to Print Module
Print file.
No problems as expected. I dont see that there is any seting to adjust that will clear this issue.
Q. Is it consistent with every BW file or just some?
Aside from changing your workflow so as not to produce jpgs at all in favor of a Lightroom gallery for showing your clients the images, based on the info I have I cannot replicate the problem. So I will try first an optimization of the catalog.
Prefernces > General > Go to Catalog Settings > General > Relaunch and Optimize.

Similar Messages

HT1390 this movie requires quicktime which isn't supported by this version of iTunes, 10.6, when trying to play rented movies?

anyone ever gotten the message:this movie requires quicktime which isn't supported by this version of iTunes, 10.6, when trying to play rented movies?
how to fix it?

i also want to add that this video shows status " stopped (err = 503)"

HT1657 I got an error message when trying to play rented movies

I got this error message when I tried to play rented movies after downloading.
"We could be complete your iTunes Store request. An unknown error occurred (-42110). There was an error in iTunes Store. Please try again later."
Anyone has similar experience?

Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799

IE and FireFox crashing when trying to play QuickTime movie

I'm on a PC running Windows 2000 and QuickTime 7. I'm trying to play some movies of my own within a browser but am experiencing problems with the browsers crashing. Sometimes, they work the first time, but after that the browsers crash. The error messages are:
Microsoft IE has encountered a problem and needs to close.
firefox.exe has generated errors and will be closed by Windows.
I've been trying variations of the HTML code but here is the last one that actually worked the first time in FireFox but not anytime after that:
<OBJECTCLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"
CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab"
HEIGHT=405
WIDTH=720
<PARAM NAME="src" VALUE="VideoDetail_720-5K.mov" >
<PARAM NAME="CONTROLLER" VALUE="False" >
<PARAM NAME="HREF" VALUE="URL" >
<PARAM NAME="TARGET" VALUE="QuickTimePlayer" >
<EMBED SRC="VideoDetail_720-5K.mov"
HEIGHT=405 WIDTH=720
TYPE="video/quicktime"
PLUGINSPAGE="http://www.apple.com/quicktime/download/"
CONTROLLER="False"
HREF="URL"
TARGET="QuickTimePlayer"
/>
</OBJECT>
The movie is 8MB is size. I've checked my mime settings and the Flash player is not checked.
Can anyone tell me what I might be doing wrong?
Thanks,
Tana
PC Windows 2000

You've failed to enter a "source" for your HREF "target".
Use a complete URL to the QT file you wish the "quicktimeplayer" to "target" and your page should work as you want.

Error message when trying to play a movie

hi i am trying to watch a rented movie when i gat an error message suggesting trying later error number = (-42110) not sure why any help welcomed

Hi there, annalese2012!
I've done a little research on that error code for you and it looks like it is mentioned in an article we have online, located here:
iTunes: Possible iTunes Store errors
http://support.apple.com/kb/ts1424
The article suggested for dealing with that error code can be found here, and it is the advanced iTunes Store troubleshooting article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
It looks like this section in that article specifically has the information you might need:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Error message (-50) when trying to buy a movie on itunes store

Trying to buy a movie on itunes store, i'm getting an error msg: "Could not purchase "MOVIE". An unknown error occurred (-50). There has been an error in itunes store. Please try again later." This never occurred in the past. The problem doesn;t seem to be going away. How to fix this? Many thanks

it also happened to me trying to buy a song

Black Screen when trying to play iTunes Movies PLEASE HELP

This is my set up. I have an iMac running OS X (10.5) and a mac mini running (10.6) this mac mini is hooked up to my tv in the living room, it also is fitted with an external hard drive (this is where my itunes media folder is located for my mac mini). I enabled home sharing on both macs and they are both authorized to play my media. I recently downloaded two movies on my iMac and transferred them to my mac mini. Now here is the problem. I can play the movies fine on my iMac but when i try to play them on my mac mini all i get is a black screen with no sound. The movie is playing on the mac mini because i see the time bar moving but nothing is on the screen.
Please help.

In an attempt to consolidate numerous threads about video problems with Flash Player 11.2.202.228 I've created a new post where I'd like to have people who are still encountering this issue to either post or link to an existing post with their information.
Video investigation with Flash Player 11.2.202.228
We're asking for 4 pieces of information
1. A brief explanation of the problem
2. Did disabling hardware acceleration fix the issue
3. A sample URL
4. A copy of your dxdiag report
If you've already provided all 4 answers to us, thank you and please take a minute and copy the URL of your post (right click on the highlighted title of your post as shown in the example screenshot below) and paste it as a reply so your input is not lost.
If you haven't provided these answers, we ask that you take a few minutes and create a new post with the required information.

Itunes quits when trying to play purchased movies from itunes store

Mac OS X 10.4.10 Dual G5 No add ons. Everytime I try to play purchased movies or purchase a movie itunes quits. it seems this began after a recent updates as I noticed the issue when i tried to purchase a movie it downloaded and crashed while processing file. I tried to open a previously purchased movie and crash again. I rebuilt the xml file and cleared preferences. Any ideas?

Hi, did you find an answer to the problem, as I have the same one (with Wiindows 8)

Quicktime displays a question mark when trying to play a movie

hello, i upgraded to the latest version of quicktime for macosx, and since then it hasnt been able to play any movies, not even the ads on the quicktime website, it just displays the question mark. i tried updating the flash plugin but had a wierd problem. when i go to quicktime preferences and try to enable flash, it doesnt save the change, i enable it, the go to a new pane, but when i go back the box is unchecked, any ideas why this is happening. ive tried repairing permissions and restarting, but this does nothing. why cant i watch movies anymore????!!!!?!?? thanks in advance for any feedback.

Well, unless someone else chips in here to help, your other option is to contact Apple's technical support. Their U.K. phone no. is: (44) 0870 876 0753
I could be wrong, but as I understand it, if you've never contacted Apple before for the particular Mac you're calling about, then your 90 days of complimentary phone support will begin from your very first call.
Here is the "Contacting Apple Support and Service" page:
http://www.apple.com/support/contact/
...and the phone numbers are here:
http://www.apple.com/support/contact/phone_contacts.html
Meanwhile, you can always send some feedback to Apple about your experience here:
http://www.apple.com/macosx/feedback/
MacBook Pro 15" Mac OS X (10.4.8)

HT4095 Keep getting a error when trying to play rented movie we could not complete your itunes store request. an unknown error occurred (-42110)

I downloaded a HD movie for rental and every time i go to play it i get a error saying we could not complete your Itunes store request. a Unknown error occurred (-42110)

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Error when trying to play embedded movie

SecurityError: Error #2148: SWF file http://wings-of-lifedotcom/zodiac-code-video/zodiac-code-video.swf cannot access local resource D:\Users\Matthew\My Documents\MS Data Systems\wings-of-life.com\the-zodiac-code.flv. Only local-with-filesystem and trusted local SWF files may access local resources.
at flash.net::NetStream/play()
at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_play()
at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_load()
at fl.video::VideoPlayer/load()
at fl.video::FLVPlayback/doContentPathConnect()
Why is this happening?

This is from a page that works correctly:
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','360','height','280','title','about us','src','about_us_2008','quality','high','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','about_us_2008' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="360" height="280" title="about us">
<param name="movie" value="about_us_2008.swf" />
<param name="quality" value="high" />
<embed src="about_us_2008.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="360" height="280"></embed>
</object></noscript>
This is from the page that does not:
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','360','height','236','title','zodiac-code-video','src','zodiac-code-video','quality',' high','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version= ShockwaveFlash','movie','zodiac-code-video' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="360" height="280" title="about us">
<param name="movie" value="zodiac-code-video.swf" />
<param name="quality" value="high" />
<embed src="zodiac-code-video.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="360" height="236"></embed>
</object></noscript>
The only difference is the movie name. I just cut and pasted the code from an existing page and put in the name of the new movie. Why does it not work?
Thank you.

"This Movie could not be played" Message appears when trying to play video?

I have synced a number of vids to my iPhone 3G running 2.2 software.
This has been done thru iTunes which has a feature that advises you BEFORE you try and sync the file if it is in a compatible format and size. If not, then you cannot sync it.
I have been using a third party Vid file type converter to convert various files into iPhone compatible .mp4 files with sizes of either 320 X 240 or 640 X 480.
All worked well until today. I had just finished playing such a vid with no problems and when I went to replay it I got this message:
"THIS MOVIE COULD NOT BE PLAYED"
I then went thru my 26 vids that I had synced to my iPhone and found that 12 of them would no longer play????????
NOTHING changed...How could a vid that played fine suddenly not play anymore, along with a number of others that previously played with no problems?
I cannot think of what specific parameters are the same in those 12 files that make up the group that will no longer play?
I did a "Hard Shut Down" of my iPhone and then Reset all Settings...nothing worked?
Tonite, when I get home and have access to iTunes, I will delete and re-sync some of the now unplayable vids to see if they will be accepted for syncing and if so, if they will now play again?
In the meantime, is anyone else having similar problems? Cause? Fix? Workarounds?
Any advise would be much appreciated, as I do NOT want to lose the ability to view these vids, or any others like them, that may no longer play on my iPhone!
Thanx..
Chuck Proche

Thankyou for the two replies.
I have some good news but I still am concerned about why this happened?
Using iTunes, I deleted then re-synced the video files that wouldn't play and now all of them play again.
As I don't know why this problem occured, I am concerned about it happening again...it is NOT fun to have to delete and reload all of these vids, but, at least I know that there is some kind of "workaround"!
If anyone has an idea of WHY this happened and, perhaps how to prevent it in the future, I would appreciate that input despite the fact that all my vids now play again.
Chuck Proche

Director crashes when trying to play quicktime movie

I'm using Director MX 2004 and Quicktime 7.
I've imported a .mov quicktime file into my cast, then
positioned it in the score. Everytime the playhead reaches the
movie file, director crashes. (unexpectedly quit message).
I've just updated to Quicktime 7.1.1 but I'm still having the
same problem.
Please help!

Thanks Jay...
I try to change the codec of my QT movie...
But in MAC the proyector runs ok but in Windows not, please
be quick in the develop of QuickTime Asset Xtra !!!

I'm getting an error when trying to play movies

I keep getting this error when trying to play my movies:
This movie requires QuickTime, which is not supported by this version of iTunes.

radio662 wrote:
Same here. I hope it is something with Perian and not a new Apple view to not support anything from outside anymore as they have dumped front row too. They might want to force us into downloading movies through the iTunes store only?
it's not just videos from the "outside" - i'm having this issue with brand new material downloaded from itunes. specifically, doctor who season 6 part 2 and futurama season 8.

Error 2000 with quicktime on trying to play rental movie

When trying to play a movie in i-tunes I get this error message.How do I go about it.

For anyone else interested, the details are here (thanks, Peter):
http://interactive.usc.edu/members/ppreuss/2008/03/itunesmovie_rental_error4211.html

Error "Video System Error: Unknown message: bindSuccss" when trying to play a movie in LR 5.3

Similar Messages

Maybe you are looking for