Error VRC105-This channel is currently off air so ...

On the old BT Vision software I used to have a Series Recording set for the 6:50pm edition on Newsround on the CBBC Channel and was able to play back the recording whether the channel was still on air or not.
Now I have the new BT Vision software I am still able to set a new series recording for that same edition of Newsround and it appears to record but if I try to play back the recording whether the channel is on air or not, in a red banner it says "VRC105 - This channel is currently off air so can't be recorded".
Why is it saying this? Especially when I am pressing play and it seems to think I am trying to record either the channel or record what I've recorded.
Has anyone else received this error? If you did, did you manage to fix this? And how did you fix this error?
Hope somebody can help me.
Thanks.

So am I talking to myself once again like my previous post on the BT Vision forum? http://community.bt.com/t5/BT-Vision/BT-Vision-update-2-days-early-Problems-with-box-after-update/td...
You'd think SOMEBODY may know what this error is!
And can reply and help me rectify the fault!
You'd think even a BT Administrator would even bother to take a read of my post issue and bother to investigate what's wrong and how to rectify the fault and bother to reply back to me personally or on my post.
But these BT Forums are so hopeless unless somebody can prove me wrong by replying with useful information as to how to correct this fault then I really might as well post in the Japanese alphabet if I knew the language or talk to a brick wall!

Similar Messages

  • When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

    When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

    Hi,
    Please download the updates directly from the link below:
    WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    Regards,
    Sheena

  • I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version.  How do I update my PHONE and why is an itunes update being confused for my iphone?

    I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version.  How do I update my PHONE and why is an itunes update being confused for my iphone?

    You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

  • When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported.  Is this a bug in Mavericks?

    When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported. 
    This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks).  So far as I know, all of the kit I am using is in good order (despite the file corruption reports).  So I am beginning to wonder if it could be due to a bug in Mavericks?  Both SSD drives have been formatted to MacOS Extended (journaled) format.  Should I have used a different format, I wonder?
    Has anyone else encountered this issue?
    Does anyone have a solution?
    Or an explanation that might help my investigation of the issue?
    Thanks guys,

    I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs. 
    I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
    I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try.

  • AIR, Acrobat/Reader XI 11.0.06 - There was an error opening this document. This file cannot be found

    Hi,
    After Adobe Reader and Acrobat updated to v11.0.06 I've started getting the following error message when I try to load PDF file into my AIR application on Windows (Vista and 7) machines: "There was an error opening this document. This file cannot be found."
    I'm loading PDF just like it's been described in Flex/AIR documentation. HTMLLoader loads html that looks like: <html><body><object id="PDFObj" data="app:/pdfs/test.pdf" type="application/pdf" width="100%" height="100%"></object></body></html>
    The file is in place and I've tried opening it from the Reader itself without any errors. When I uninstall Reader XI and install Reader X instead everything comes back to normal and the file is opened without an error.
    What was changed in the Acrobat/Reader 11.0.06 that it prevents PDFs from being opened from AIR application? Or was it changed even before 11.0.06?
    Kind regards,
    Roman

    Fyi, in addition to my earlier post, the other pc is using Adobe 8.1.1 and no other patch. I was trying to find 8.1.1 version but could not find a trust worthy site to load from. Do you think the error caused by using the 8.1.2 version? Thanks

  • SOAP channels in rwb showing error "No Adapters registered for this channel

    SOAP channels in rwb is showing error "No Adapters registered for this channel",
    what is the problem?
    i tried to locate and restart the SOAP adapter from Visual admin, but couldnt find it in visual admin, pls help in locating it in visual admin

    Hi,
    In Visual Admin, Cluster tab --> Server -> Services -> Deploy --> Radiobutton Application
    --> sap.com/com.sap.aii.af.soapadapter --> Press start / stop
    This way youmay restart the SOAP adapter.
    Also Please check if there is any cahce problem, Try to refresh it. & SAP Note- 856597
    Thanks
    Swarup

  • ERROR: This site is currently unavailable.

    I receive this message when I try to upload my site to Adobe Business Catalyst I signed up for the monthly subscription with one free hosting site. So is my site hosting still ABC?
    Not sure what's happening since my trail version stopped.
    ERROR: This site is currently unavailable. For more information please contact: muse.  what phone number do I use to contact Muse........ The support team at Adobe don't seem to know any answers.. I have been on the phone for hours and keep getting pasted from one person to the other...Here's what i want to do... design in Muse host in ABC, (hosting 5 sites) I have an adobe ID. I'v paid for Muse and hosting of one site....
    Hope someone can help!!!

    these are the messages i get. It's only giving me the option for a new site...but this is not a new site.....it's the same site that i had with the trail version......I did change from a pc to a mac... my site was palestine http://palestine21.businesscatalyst.com/

  • OSX error message - the software for this printer is currently unavailable

    OSX error message when loading driver for photosmart 7520 - "the software for this printer is currently unavailable.  Please contact the printer's manufacturer for the latest software."  

    I searched the web for you and found this.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=51994...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Error: cartridge not suitable for this printer after switch off and on

    HI,
    I have an officejet 6310 all-in-one. After printing and switching it off and switching it back on the next day, I get the message (translated from Dutch):
    catridge error:
    Rightside cartridge isnot suitable for this printer
    Switching it off, removing either the right-hand cartridge or even both cartridges doesn't solve this issue. Anyone has an idea how to solve this?
    Thanks in advance,
    Ronald.

    Hi - Not sure why the other link didn't work.  Here is the URL to the document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00831987&tmp_task=solveCategory&lc=en&dlc=en&cc​...
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

    I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

    Hi ..
    Which OS X is installed on your Mac ?
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
    Make sure your Mac OS X software is up to date.
    Disconnect the iPad from your Mac.
    Open System Preferences > Software Update > Check Now
    If any updates are required, make sure to restart your Mac after the updates are installed then connect your iPad and see if iTunes recognizes it under Devices.

  • I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

    I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David's MacBook Air.sparsebundle" is already in use.

    I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
    What now?
    Macbook Air.
    Was working fine for the past year until now.

    See more like this on the right.. this is the most common error reported here since mountain lion came out..
    Or read C12.. http://pondini.org/TM/Troubleshooting.html
    Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap.

  • "The server responded with an error. The server is currently unreachable or the connection was blocked"

    Hi, since this morning i receive this message on my Mac Air (10.8.5) when i open iCal (which is synced through iCloud): "The server responded with an error. The server is currently unreachable or the connection was blocked". You know what it can be?
    Thanks for your help!

    Are you behind a firewall at work or elsewhere?  Does you calendar sync with some other system like google (could be the google server is not responding)?  All we know from the message is that your mac cannot reach the server.  Maybe try later.  Are you using wifi or have an ethernet connection to the router?

  • Error: the object is not currently contained in a document

    When I do a save or switch to other pages, I get the following error:
    "Translate error: Error: the object is not currently contained in a document"
    The web page I have open then doesn't render correctly in the window - although it looks fine in a browser. I already tried deleting the cache file and even the entire personal configuration file. How do I fix this? I am using Dreamweaver CS6, by the way.

    I've had a look at your medium.html page in a couple of browsers, as well as in the W3C validator.
    I suspect Dreamweaver is having a problem with the external JavaScript that's loaded on line 20. It's coming from a remote server, and is likely to take some time to load. There also seems to be a problem with the "Begin Widget Config" comment on line 21.
    I noticed that Source Code in both Firefox and Chrome display the Begin and End comments in a different colour from other HTML comments. Also the W3C validator complains about the opening angle bracket of the comment on line 21. When I copied the code into Dreamweaver and removed the template markup, I noticed that Dreamweaver also failed to display the comments in grey. But when I deleted the HTML comment tags and reapplied them, they turned grey.
    It sounds like a long shot, but it looks as though there is something unusual about the characters in the comments on lines 21 and 42. Open the main template, delete those comments, and add them again (or leave them out - they're not necessary).
    If editing the comments doesn't fix the problem, I suggest that you try deselecting the option to display external files (View > Display External Files toggles the option on and off). Alternatively, comment out the reference to the script on searchschoolsnetwork.com while you're working with the files locally.

  • "There was an error opening this document" Adobe PostScript Driver creates corrupt PDF's.

    Hello,
    Just looking for a point in the right direction or some answers to a problem that has been plaguing a few of our users.
    We use Adobe reader X and Adobe Post Script driver as a means to print a document as a PDF.
    However, a few of our users are experiencing the problem where as the every so often a PDF created comes up with the "There was an error opening this document.  The file is damaged and could not be repaired." Message. these documents always vary in size but average around 20 - 30 kb, These seem to be complete anomolies and are corrupted from the off. The only solution we have found for this is a complete rebuild. But we have no idea what is causing this, as we are using the latest version of Adobe Reader. Also, a document that will print corrupted on one go, will print fine on the next.
    Thanks.

    Hi Lori,
    Thanks for your reply currently all users access these PDF's through the standalone reader and users on the most up to date version of Adobe Reader X are not using protected mode as we have had it turned off for a while to fix other problems.
    Thanks

Maybe you are looking for