Error vss writers exchange 2010 windows backup

I have this error, when running windows backup on server with exchange 2010:
Writer name: 'Microsoft Exchange Writer'
   Writer Id: {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}
   Writer Instance Id: {400de426-a419-459f-a953-91026051bf91}
   State: [8] Failed
   Last error: Retryable error
I've rebooted the server several times, but without success.
Does anyone have any idea?
Thank you
Cristiano Ianiri

Hi,
Do you have any running AV software? If there is, please set the AV Exclusion on database file or disable AV temporarily.
From the description, you have restarted server several times. It didn't work. To narrow down the issue, could you please restart the Microsoft Exchange Information Store service again on the server where you did backup at your convenience?
After that, please run the VSSadmin list writers command to determine whether the writer state returns to a stable state.
Besides, please check the database that you want to backup to see if it is in healthy state. You can use the get-mailboxdatabasecopystatus cmdlet to check this.
If you have checked steps above, please increase the diagnostic logging level for the Exchange Writer and check if there is any clues.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Exchange 2010 DAG backup & Transaction logs

Hi,
What is Microsoft recommended best practise for Exchange DAG group backup in an environment where there are Active & multiple (2-3) passive copies of the databases?
Is it a good practice to backup transaction logs as frequently as possible in addition to daily full backup ? This I belive will allow to restore the DB to the latest possible state
using last good full backup & transaction logs (Like restoring SQL databases)
Thanks

Hi,
Windows Server Backup can't backup passive copy. If you want to backup both active and passive copies, you need to use DPM or other third party.
Here is a similar thread for your reference.
Exchange 2010 DAG Backup Best Practices
http://social.technet.microsoft.com/Forums/exchange/en-US/269c195f-f7d7-488c-bb2e-98b98c7e8325/exchange-2010-dag-backup-best-practices
Besides, here is a related blog below which may help you.
Backup issues and limitations with Exchange 2010 and DAG
http://blogs.technet.com/b/ehlro/archive/2010/02/13/backup-issues-and-limitations-with-exchange-2010-and-dag.aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2013 Window Backup failure - fails to clean up log files - error FFFFFFFC

Hello,
We currently have an Exchange 2013 - Exchange 2007 coexistence setup.
1x Windows Server 2008 R2 with Exchange 2007 CAS/HUB
1x Windows Server 2008 R2 with Exchange 2007 MBX
1x Windows Server 2008 R2 with Exchange 2013 CU 3 (all roles)
Since our current backup solution (Symantec Backup Exec 2010 R3) does not support backing up Exchange 2013 CU3 databases, we are using the builtin Windows Backup feature to backup the Exchange 2013 CU3 databases.
This has functioned for a while, until all of a sudden, the log files are not cleared anymore, causing our log disk to fill up.
Our Exchange 2013 server looks like this:
C: Windows + Exchange installation
D: Databases
E: Database Log Files
F: Archive Databases
G: Archive Database Log Files
S: Dedicated backup volume
The backup is scheduled to run every day at 21:00 hours, performing a full VSS backup of D:,E:,F: and G: to the volume S:
Windows backup log says the backup completed with exceptions, leaving the Exchange logs untouched and filling the drive.
The Windows Backup Command Line tools are NOT installed since they are not compatible with Exchange 2013.
In the eventvwr we can see the following error:
The Microsoft Exchange Replication service VSS Writer (Instance a33ec440-7f12-4c50-806b-1bc5ceaf8aad) failed with error FFFFFFFC when processing the backup completion event.
The command VSSADMIN LIST WRITERS displays the following:
Writer name: 'Microsoft Exchange Writer'
   Writer Id: {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}
   Writer Instance Id: {cf84a907-76dc-428c-90e0-c18a3f9db493}
   State: [1] Stable
   Last error: Retryable error
Restarting the Microsoft Exchange Replication (MSExchangeRepl) clears the writer error, same with a reboot, however the error comes backup after the next backup.
Any thoughts on how to resolve this issue?
Thanks.

Hello,
Here is a blog for your reference.
http://blogs.technet.com/b/timmcmic/archive/2012/03/11/exchange-and-vss-my-exchange-writer-is-in-a-failed-retryable-state.aspx
If there is any useful information after you change the logging to expert, please free let me know.
Cara Chen
TechNet Community Support

Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration

Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1722
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 323
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1237
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 313
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 10060
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 311
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
    Lid: 15000   dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
    Lid: 15000   dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 10060
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 318
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 53361   StoreEc: 0x977
    Lid: 51859
    Lid: 33649   StoreEc: 0x977
    Lid: 43315
    Lid: 58225   StoreEc: 0x977
    Lid: 39912   StoreEc: 0x977
    Lid: 54129   StoreEc: 0x977
    Lid: 50519
    Lid: 59735   StoreEc: 0x977
    Lid: 59199
    Lid: 27356   StoreEc: 0x977
    Lid: 65279
    Lid: 52465   StoreEc: 0x977
    Lid: 60065
    Lid: 33777   StoreEc: 0x977
    Lid: 59805
    Lid: 52487   StoreEc: 0x977
    Lid: 19778
    Lid: 27970   StoreEc: 0x977
    Lid: 17730
    Lid: 25922   StoreEc: 0x977
    + CategoryInfo          : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
   0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName        : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!

Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Migrating Exchange 2007 to Exchange 2010; initial backup slow...

Just migrated about 300 Exchange 2007 mailboxes to Exchange 2010 database. Temporarily using Windows Server Backup for Server 2008 R2 to backup the databases to a remote storage. Initial full backup of the database is taking longer than 24 hours
for a 235 GB database and what is now 334,000 log files...as a result of the migration. Seems like a long time.
I tested network connectivity to and from the SAN, and the Exchange server and there are no server or disk I/O issues. Server is running 16 cores and 48 GB RAM. Is this normal for it to take this long to run through the consistency checks and
backups for this amount of data?
Fuel

Download Exchange server recovery tool that gives you best EDB recovery app for repairing EDB file data to PST Outlook format quickly. All users
can recover their Exchange EDB file and fix EDB to PST file with best EDB file converter software. Software works on whole versions of Exchange EDB file.
Read more:
http://www.microsoft.edbtopsthelp.com/

Exchange 2010 , Windows 2008 R2 and framework 3.5 SP1

Hi all ,
I have questation about protection exchange server 2010 with framework 3.51 SP1 running in the windows 2008r2 serveru . The DPM server is instaled in the windows 2012r2 server and supported version in this os is 2012R2 RU5 . After install i upgrade client
in the exchange serveru . and i the DPM console is status OK ? It is Ok ??? Or which client is running without fw 4.0 ? In another server I try run c:\Program Files\Microsoft System Center 2012\DPMAgentInstaller_KB3021791_AMD64 and this installer do not require
fw 4,0 .....
thanx
Falcon

Hi,
DPM 2012 R2 requires at least .NET Framework 4.0 and .NET Framework 4.0 works with Exchange 2010 SP3.
For more detailed information, please refer to the articles below:
Setup prerequisites
https://technet.microsoft.com/en-us/library/hh758058.aspx?f=255&MSPPError=-2147217396
Exchange Server Supportability Matrix
https://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error upgrading form exchange 2010 to exchange 2013

Hello,
I have Exchange 2010 sp3 running on win server 2012 R2 sp1 standanrd. I would like to upgrade to exchange 2013 and I read that installation of exchange 2013 is coexistent with exchange 2010 already installed. But When I try to install exchange 2013 I keep
getting this error :"Exchange server is in an inconsistent state. Only disaster recovery mode is available. Please use Setup /m:RecoverServer to recover this Exchange server." But after closing set up the server is still running
fine.

Hi,
Based on my research, the issue can occur when the Exchange server object already exists within Active Directory.
Thus, I’d like to confirm the following information:
1. Does your new Exchange 2013 server have the same server name with the previous one?
2. Have you change your Exchange 2010 server name to legacy.domain.com?
Here is a similar thread you can refer to:
http://social.technet.microsoft.com/Forums/exchange/en-US/20bab6f7-56e6-49b9-94df-48707fb915f7/installation-errorfresh-install-on-a-fresh-clean-server-2012?forum=exchangesvrgeneral
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange 2010 server backup.

What is the best practise to take the Exchange server 2010 servers.
We have 4 servers in DAG with 1 active and 3 passive copies. We are currently taking Full backup in the weekend and differential backup daily. We use HP Data Protector for taking backup. Current DB size is 450GB.
What is the prefered method of backup (Differential or Incremental).
If we take incremental backup will it purge logs from all the exchange servers in DAG.

Hi,
Yes, Incremental backup will truncate the transaction log files. Here is an related blog below, please refer to the "DPM 2010 (beta) or every other 3rd party" section.
Backup issues and limitations with Exchange 2010 and DAG
http://blogs.technet.com/b/ehlro/archive/2010/02/13/backup-issues-and-limitations-with-exchange-2010-and-dag.aspx
A similar thread which may help you for your reference.
http://social.technet.microsoft.com/Forums/en-US/e76d57a5-5536-4c43-95b8-ea2a636ba054/dpm-2010-and-exchange-dag-recommended-way-to-backup
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Error when Installing Exchange 2010

I get the following error when attempting to run setup /PrepareAD /OrganizationName:vdh -- Clean Install of Exchange
Entry DN: cn=X400,cn=409,cn=Address-Templates,cn=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Add error on entry starting on line 47: Object Class Violation
The server side error is: 0x207d An attempt was made to modify an object to include an attribute that is not legal for its class.
The extended server error is:
0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data 590479
An error has occurred in the program
Connecting to "labkord-wdad01.lab.bhavingpatel.com"
Logging in as current user using SSPI
Importing directory from file "c:\tmp\C5C.tmp"
Loading entries
1: CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry DN: CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry modified successfully.
2: CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry DN: CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry modified successfully.
3: CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry DN: CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry modified successfully.
4: CN=409,CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry DN: CN=409,CN=Address-Templates,CN=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry modified successfully.
5: cn=X400,cn=409,cn=Address-Templates,cn=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Entry DN: cn=X400,cn=409,cn=Address-Templates,cn=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Add error on entry starting on line 47: Object Class Violation
The server side error is: 0x207d An attempt was made to modify an object to include an attribute that is not legal for its class.
The extended server error is:
0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data 590479
4 entries modified successfully.
An error has occurred in the program
If someone knows how to resolve this please let me know. I'm having issues getting it to work.
BTW I ran setup /PrepareSchema already....I can't get this crap to work, is it just me? it's starting to drive me off the wall....
.......ok after manually adding the cn=x400 i now get this error:
Entry DN: cn=X400,cn=409,cn=Address-Templates,cn=Addressing,cn=vdh,cn=Microsoft Exchange,cn=Services,cn=Configuration,dc=lab,dc=bhavingpatel,dc=com
Add error on entry starting on line 182: Object Class Violation
The server side error is: 0x207d An attempt was made to modify an object to include an attribute that is not legal for its class.
The extended server error is:
0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data 131517
An error has occurred in the program
setup logs:
[6/19/2014 10:42:40 PM] [2] Entering ScHavePermissionToCreateDSObject
[6/19/2014 10:42:40 PM] [2] Leaving ScHavePermissionToCreateDSObject
[6/19/2014 10:42:40 PM] [2] User has enough permissions to update templates.
[6/19/2014 10:42:40 PM] [2] Entering CAtomOrgCtChildren::ScInstallTemplates
[6/19/2014 10:42:40 PM] [2] Entering ScCreateTempFileName
[6/19/2014 10:42:40 PM] [2] Leaving ScCreateTempFileName
[6/19/2014 10:42:40 PM] [2] Entering ScSubstituteStringInFile
[6/19/2014 10:42:40 PM] [2] Leaving ScSubstituteStringInFile
[6/19/2014 10:42:40 PM] [2] ScRunLDIFScript (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\exmisc.cxx:888)
Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
[6/19/2014 10:42:40 PM] [2] CAtomOrgCtChildren::ScInstallTemplates (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:816)
Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
[6/19/2014 10:42:40 PM] [2] Leaving CAtomOrgCtChildren::ScInstallTemplates
[6/19/2014 10:42:40 PM] [2] CAtomOrgCtChildren::ScUpdateTemplates requires that a user have at least Exchange Administrator permissions on the organization object. Templates will be updated in the organization when update is run by a user with the
correct level of permissions. If update has ever been run by a user with Exchange Administrator permissions at the Organization Level, then templates have already been updated, and this message can be safely ignored. (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:1508)
Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
[6/19/2014 10:42:40 PM] [2] CAtomOrgCtChildren::ScUpdateTemplates (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:1559)
Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
[6/19/2014 10:42:40 PM] [2] Leaving CAtomOrgCtChildren::ScUpdateTemplates
[6/19/2014 10:42:40 PM] [2] CAtomOrgCtChildren::ScAddDSObjects (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:216)
Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
[6/19/2014 10:42:40 PM] [2] Leaving CAtomOrgCtChildren::ScAddDSObjects
[6/19/2014 10:42:40 PM] [2] mode = 'Install' (61953) CBaseAtom::ScSetup (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:535)
Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
[6/19/2014 10:42:40 PM] [2] ScSetupAtom (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:897)
Error code 0XC1037AE6 (31462): Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory.
[6/19/2014 10:42:40 PM] [2] Leaving ScSetupAtom
[6/19/2014 10:42:40 PM] [2] [ERROR] An error occurred. The error code was 3238230758. The message was Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory..
[6/19/2014 10:42:40 PM] [1] The following 1 error(s) occurred during task execution:
[6/19/2014 10:42:40 PM] [1] 0. ErrorRecord: An error occurred. The error code was 3238230758. The message was Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory..
[6/19/2014 10:42:40 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred. The error code was 3238230758. The message was Extending the schema in the Active Directory failed. Please consult the error log
LDIF.ERR in your TEMP directory..
[6/19/2014 10:42:40 PM] [1] [ERROR] An error occurred. The error code was 3238230758. The message was Extending the schema in the Active Directory failed. Please consult the error log LDIF.ERR in your TEMP directory..
[6/19/2014 10:42:40 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/19/2014 10:42:40 PM] [1] Finished executing component tasks.
[6/19/2014 10:42:40 PM] [1] Ending processing.
[6/19/2014 10:42:40 PM] [0] The Exchange Server Setup operation did not complete. For more information, visit http://support.microsoft.com and enter the Error ID.
[6/19/2014 10:42:40 PM] [0] End of Setup
[6/19/2014 10:42:40 PM] [0] **********************************************

You try to install E2010 with SP3 or SP1?
E2010 SP1
Can you please paste the setup logs here?
The error of the log is above.
You have Enterprise Admins credentials when you try to execute Setup.com
/PrepareAD?
Yes. I have all the Admin rights
You
try to install exchange via GUI or unattended setup ?
Both same error.

Exchange 2010 SP1 install fails with -1603 error

I am getting a -1603 error when installing Exchange 2010 SP1. Installation fails when copying files/removing old version with the following error:
[10/01/2010 23:17:06.0823] [2] Beginning processing uninstall-MsiPackage -ProductCode:'6574fdc2-40fc-405a-9554-22d1ce15686b' -LogFile:'C:\ExchangeSetupLogs\InstallSearch.msilog'
[10/01/2010 23:17:06.0847] [2] Removing MSI package with code '6574fdc2-40fc-405a-9554-22d1ce15686b'.
[10/01/2010 23:17:09.0400] [2] [ERROR] Unexpected Error
[10/01/2010 23:17:09.0401] [2] [ERROR] Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
[10/01/2010 23:17:09.0401] [2] [ERROR] Fatal error during installation
[10/01/2010 23:17:09.0409] [2] Ending processing uninstall-MsiPackage
[10/01/2010 23:17:09.0411] [1] The following 1 error(s) occurred during task execution:
[10/01/2010 23:17:09.0412] [1] 0. ErrorRecord: Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
Does anyone know how to resolve this?
Thanks,
greg

Hi Frank,
I've the same problem when I try to install the SP2.
When I try to install RU 4v2, 5 or 6, then comes error 2771. So I waiting for SP2 in the hope, a full install of the SP will fix this.
But the setup broke with the following entries:
[12.07.2011 19:51:59.0379] [0] Setup will run the task 'uninstall-msipackage'
[12.07.2011 19:51:59.0379] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU''
[12.07.2011 19:51:59.0379] [1] Die Active Directory-Sitzungseinstellungen für 'Uninstall-MsiPackage' lauten: Vollständige Gesamtstruktur anzeigen: 'True', Konfigurationsdomänencontroller: 'LicPDC.kh-lichtenstein.local', Bevorzugter globaler Katalog:
'LicPDC.kh-lichtenstein.local', Bevorzugte Domänencontroller: '{ LicPDC.kh-lichtenstein.local }'
[12.07.2011 19:51:59.0379] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU'
[12.07.2011 19:51:59.0410] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
[12.07.2011 19:52:04.0551] [1] [ERROR] Unexpected Error
[12.07.2011 19:52:04.0551] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Schwerwiegender Fehler bei der Installation. Error code is 1603.
[12.07.2011 19:52:04.0551] [1] [ERROR] Schwerwiegender Fehler bei der Installation
[12.07.2011 19:52:04.0613] [1] Ending processing uninstall-msipackage
The MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1' ist the SP1.
Actual System: Server2008R2SP1 / Exchange2010SP1 RU3v3
It is possible to solve this problem?
Rene Hubert - Systemadministrator - DRK KH Lichtenstein gGmbH
I too have this
problem.

Exchange 2010 - The certificate status could not be determined because the revocation check failed.

I have tried everything I have found online to get my DigiCert to work.
I have exported the cert and imported it into my child domains and they look perfect.
It is just my parent domain having issues.
netsh winhttp show proxy
does show my correct proxy server for http and https and port 8080
I have tried name, FQDN and IP address.
In the Bypass-list I have tried none, *.domain.com, and a list of all domains and child domains in my forest.
I have flushed the cache
certutil -urlcache crl delete
certutil -urlcache ocsp delete
and rebooted the Exchange 2010 (Windows 2008 R2) server
No matter what, I still see in my Server Configuration for the parent domain's DigiCert cert the message
The certificate status could not be determined because the revocation check failed.
with a red X on the left hand icon. Again, Child domains all say "The certificate is valid for Exchange Server usage."
Note: In spite of having the red X, I was able to assign via EMS the services.
Webmail works fine. Outlook Anywhere fails... I suspect it is due to my red X problem.
Suggestions?
Thanks in Advance
Jim.
Jim.

I have contacted DigiCert and they said the cert is working per their utility, hence the problem is outside the scope of their support.
I have followed, several times, http://support.microsoft.com/kb/979694
http://www.digicert.com/help/ reports all is well.
The DigiCertUtil.exe reports all is well and happy.
I have run
netsh winhttp set proxy proxy-server="http=myproxy:8080;https=myproxy:8080" bypass-list="*.mydomain.com"
Current WinHTTP proxy settings:
Proxy Server(s) : http=myproxy:8080;https=myproxy:8080
Bypass List : *.mydomain.com
I have flushed the cache using the commands
certutil -urlcache crl delete
certutil -urlcache ocsp delete
I still see in my Server Configuration for the parent domain's DigiCert cert the message
"The certificate status could not be determined because the revocation check failed."
with a red X on the left hand certificate icon.
To verify the cert via command line:
certutil -verify -urlfetch c:\mail_domain_com.cer
LoadCert(Cert) returned ASN1 bad tag value met. 0x8009310b (ASN: 267)
CertUtil: -verify command FAILED: 0x8009310b (ASN: 267)
CertUtil: ASN1 bad tag value met.
I suspect this is why I cannot get Outlook Anywhere to connect.
Child domains show a happy certificate icon. Parent domain does not.
Still scratching my head.
Thanks all!
Jim.

Exchange 2010 Mailbox Recipient List changing

I’m running up against a brick wall.
This is the Exchange 2010 server (non SBS, running on W2012 Std physical, not Hyper-V). Customer did their own migration from Exchange 2003 several months ago, but were never able to complete decommissioning their old Exchange 2003 server, which I did.
I ran through cleanup on the new Exchange 2010 (Windows 2012) server. Their primary A/D is another Windows 2003 server, and did cleanup of DNS, etc.
They've been having a problem with a specific user (Debra) even before I decommissioned the old Exchange. Email on her new Win 8.1 system is flaky -- sometimes it works, sometimes it sort of works and sometimes it doesn’t work at all – meaning
that sometimes she gets mail in/out and other times she can send out mail, but people will get NDRs trying to send her email, and other times Outlook 2013 just says “disconnected”. Saying that, they have other users on Win 8.1 with no issues at all.
So, yesterday we created a whole new, different user name (Debra1) -- different email address, different display name, and deleted her old account (Debra) from both Exchange and AD. That didn't help. It worked for a while, and then stopped working.
Today, we reloaded her machine from scratch. The customer’s IT person on site just called me to report that not only are things still not working, but get this: if he goes to EMC, he does NOT see the new user account (Debra1) we created yesterday
for Debra, but the old one (Debra) which we deleted is appearing, And, another user (Anna) that we deleted yesterday is showing up in EMC.
But Active Directory on the win 2003 server shows the new Debra1 account, and the old Debra and Anna accounts do NOT appear.
What am I missing? What could be causing Exchange to reload mailbox users??
Thanks in advance!
Kevin Weilbacher
-Kevin Weilbacher (SBS MVP)
"The days pass by so quickly now, the nights are seldom long"
KW Support MVP Blog
MVP's do NOT work for Microsoft. We give our time freely to support the SBS community!

Hi Kevin,
From your description, I recommend you run the Get-Mailbox cmdlet and check if user Debra1 is in the list.
What's more, you can click Actions -> Refresh on right side of EMC to update users.
Besides, if a user cannot send or receive emails using Outlook , I recommend you check if OWA has the same issue at first.
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Unable to generate two Exchange 2010 reports

i
I am using SCOM 2007 R2 and I am not able to pull the below Exchange 2010 reports in SCOM. till Last month its working fine and now the issue started.
1. Report Name: Microsoft.Exchange.2010.Reports.Transport.Platform.TopUsers
Error Message
Date: 2014-09-12 22:02:22
Application: System Center Operations Manager 2007 R2
Application Version: 6.1.7221.81
Severity: Error
Message: Cannot initialize report.
Microsoft.Reporting.WinForms.ReportServerException: An internal error occurred on the report server. See the error log for more details. (rsInternalError) ---> Microsoft.Reporting.WinForms.ReportServerException: For more information about this error
navigate to the report server on the local server machine, or enable remote errors
   --- End of inner exception stack trace ---
   at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo()
   at Microsoft.Reporting.WinForms.ServerReport.GetParameters()
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args)
Microsoft.Reporting.WinForms.ReportServerException: For more information about this error navigate to the report server on the local server machine, or enable remote errors
2.Microsoft.Exchange.2010.Reports.SLA
Error Message:
An error has occured during report processing.
Query execution failed for dataset 'OutageBreakdown'
For more information about this error navigate to the report server on the local server machine, or enable remote errors.
Please help us to resolve this issue.
Donald D'souza (http://donald-scom.blogspot.com/)

Regarding the error, please also try the following methods:
Error message when you try to generate a report in System Center Operations Manager 2007: "Cannot initialize report"
http://support.microsoft.com/kb/942865
SCOM - "Cannot initialize report" error
http://blogs.technet.com/b/csstwplatform/archive/2009/02/16/scom-cannot-initialize-report-error.aspx
SCOM R2 Console error message: Cannot initialize report.
http://thoughtsonopsmgr.blogspot.com/2010/04/scom-r2-console-error-message-cannot.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

MS Exchange 2010 Sp3 Ent Migration to Exchange 2013

Hello,
We currently have 2 Exchange 2010 SP3 servers in 1 DAG. Both servers host CAS, Mailbox and Hub Role.
I want to introduce a 3rd Exchange 2013 Server and slowly move users onto a new DAG I build in Exchange 2013.
Can I create a 3rd Exchange 2013 Server with CAS and Mailbox Server Role and make the 3rd Exchange server (2013) a member of the existing (2010) CAS array then slowly perform local move requests for users mailboxes
from my Exchange 2010 DAG to the Exchange 2013 DAG without any disruption to my outlook, OWA and AS clients?
Exchange 2010 (Windows 2008 R2)
Exchange 2013 (Windows 2012 R2 DataCenter)

Hi,
In Exchange 2013, all Outlook connectivity (Internal and External) takes place over Outlook Anywhere(RPC/HTTP). Thus, CAS array which is used internal for RPC/TCP protocol (MAPI) no longer exists in Exchange 2013.
For your coexistence environment and the plan to migrate all mailboxes to Exchange 2013 in the future,
we need to set all virtual directories for CAS 2013 and enable Outlook Anywhere for Exchange 2010. If the mailbox is moved to Exchange 2013, the Outlook client would connect to the server which is set in Outlook Anywhere External host name
and Internal host name instead of CAS array. If all configurations are proper, CAS 2013 would also proxy the service requests for Exchange 2010 users.
Here are some reference about Client Connectivity in an Exchange 2013 Coexistence Environment:
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
Exchange 2013 Client Access Server Role
http://blogs.technet.com/b/exchange/archive/2013/01/25/exchange-2013-client-access-server-role.aspx
Exchange Server 2013 Client Access Server High Availability
http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
Exchange 2010/2007 to 2013 Migration and Co-existence Guide
http://msexchangeguru.com/2013/05/10/exchange2013-migration/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Winnie Liang
TechNet Community Support

Uninstall/Reinstall Exchange 2010 in coexisting Exchange 2003

Hi,
Can we uninstall Exchange 2010 without any affect to Exchange 2003 in the co-existing environment? I installed Exchange 2010 in existing Exchange 2003 and tried to configure for both Exchange exist in our domain. Somehow the Exchange 2010 crashed
and now it cannot start, only stuck in Initializing process. I want to uninstall and then reinstall but I don't know if doing this will cause any problem to the Existing Exchange 2003. Could someone tell me?
Thanks,
Jim

You don't have to uninstall and reinstall server, just rebuild base server with OS with what it had earlier and recover Exchange 2010 with /m:recoverserver switch.
Recover an Exchange Server
I assume you still have Exchange 2010 database backup or original files for restore if needed and this is just OS crash and can not be repaired scenario
Blog:
http://exchangeshare.wordpress.com/

Error vss writers exchange 2010 windows backup

Similar Messages

Maybe you are looking for