Error WAD second Datasource

Hi,
when I add a second Datasource to my WAD with the same query as the first one I get the error "You have no authorization for the component queryXY".
When I delete the second datasource. Everything works finde.
Any ideas what to do?
Thanks!

I want to apply the following document. On page then the following is written: "
Open the BEx Web Application Designer and create a new web template. In the web template create two data providers both containing the query we have just created. Call the first data provider‘DP_TABLE’(or any other name you like) and the second one ‘DP_SELECTION’. "
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
For me it seems that with the second datasource the data for reposting is limited....
Copy the query is for sure a solution but with increased maintenance.

Similar Messages

I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is i

I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is incorrect.... please help

Ok, since this forum is for Photoshop Standard and Photoshop Extended, we don't know much about Photoshop Elements. There is a Photoshop Elements forum and I'll link it for you since they best know how to field your questions.
Photoshop Elements
Good luck on it!
Gene

Error in Validating datasource

I'm installing LivCycle on SUSE 10 with Weblogic 11g and Oracle 10.
When trying to validate, the following error occurs:
Validating datasource...
Datasource Fail
Name:IDP_DS
JNDI:IDP_DS
Data source settings failed validation. Failed to find/lookup datasource IDP_DS. The datasource may not be configured or may have failed to come online or is not accessible outside the LiveCycle application.
ALC-LCM-120-301: Data source settings failed validation. Failed to find/lookup datasource IDP_DS. The datasource may not be configured or may have failed to come online or is not accessible outside the LiveCycle application.
Datasource Fail
Name:RM_DS
JNDI:EDC_DS
Data source settings failed validation. Failed to find/lookup datasource EDC_DS. The datasource may not be configured or may have failed to come online or is not accessible outside the LiveCycle application.
ALC-LCM-120-301: Data source settings failed validation. Failed to find/lookup datasource EDC_DS. The datasource may not be configured or may have failed to come online or is not accessible outside the LiveCycle application.
Any ideas?
Thanks!

Are you using secured data sources? More here:
http://blogs.adobe.com/livecycle/2010/04/livecycle_on_weblogic_-_securi.html
http://blogs.adobe.com/livecycle/2010/09/increasing-weblogic-as-jdbc-connection-pool-size- for-livecycle-content-services-es2.html

TypeError: Error #1116: second argument to Function.prototype.apply must be an array

Hi Frnds
             I m loading an external swf into my swf using flex event.
          e.target.content.addEventListener(FlexEvent.APPLICATION_COMPLETE,centerSWFLoad);
but after this line it throws runtime 1116 error.please guide why this error occur and tell me which parameter i have to make array?
is it adobe frame work ecxeption or something else.kindly guide the solution.
TypeError: Error #1116: second argument to Function.prototype.apply must be an array.
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at mx.managers::CursorManagerImpl/marshalCursorManagerHandler()[C:\autobuild\3.2.0\framework s\projects\framework\src\mx\managers\CursorManagerImpl.as:980]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.managers::CursorManagerImpl/registerToUseBusyCursor()
    at mx.managers::CursorManager$/http://www.adobe.com/2006/flex/mx/internal::registerToUseBusyCursor()
    at mx.controls::SWFLoader/set showBusyCursor()
    at mx.core::Container/createComponentFromDescriptor()
    at mx.core::Container/createComponentsFromDescriptors()
    at mx.core::Container/createChildren()
    at mx.core::UIComponent/initialize()
    at mx.core::Container/initialize()
    at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
    at mx.core::Container/http://www.adobe.com/2006/flex/mx/internal::childAdded()
    at mx.core::Container/addChildAt()
    at mx.core::Container/addChild()
    at mx.c
    at mx.core::UIComponent/initialize()
    at mx.core::Container/initialize()
    at mx.core::Application/initialize()
    at centerswf/initialize()
    at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::childAdded()
    at mx.managers::SystemManager/initializeTopLevelWindow()
    at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::docFrameHandler()
    at mx.managers::SystemManager/docFrameListener()
Thanks in advance
    Vineet Osho

Thanks sir for your response.i am using flex builder three for both my application and swf that i load at runtime through swfloader.
i also go through the marshling problem forum and your reply in that forum.but couldnot find the solution.
can you please explain me what is the problem in my case and how to resolve that.the release build of my application is running perfect on some system but some time shows problem.

Shared Services API - Error when getting datasource weblogic/pool/PooledConnectionDataSource

Hello,
I have a program that connects to shared services using Java APIs. The code is usually working fine on other environment.
This one is on EPM version 11.1.2.1 and I get an error after this procedure --> system = CSSSystem.getInstance(context, "");
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.RegistryUtils buildConnFromDriverManager
WARNING: Check whether Oracle Home and Instance environment variables are defined appropriately. RootCause : weblogic.jdbc.sqlserver
.SQLServerDriver
Error when getting datasource weblogic/pool/PooledConnectionDataSource
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.RegistryUtils createNewConnection
SEVERE: Failed to create connection from data source. RootCause:weblogic/pool/PooledConnectionDataSource.
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.exceptions.RegistryException <init>
INFO: Registry Exception Occured - Failed to create new database connection using datasource.RootCause:[weblogic/pool/PooledConnecti
onDataSource]
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.Registry lookupComponentsWithException
INFO: EPMREG-11045
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.exceptions.RegistryException <init>
INFO: Registry Exception Occured - Failed to create new database connection using datasource.RootCause:[weblogic/pool/PooledConnecti
onDataSource]
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.Registry lookupWithException
INFO: EPMREG-11038
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.exceptions.RegistryException <init>
INFO: Registry Exception Occured - com.hyperion.hit.registry.exceptions.RegistryException: Failed to create new database connection
using datasource.RootCause:[weblogic/pool/PooledConnectionDataSource]
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.Registry lookup
INFO: EPMREG-11038
Jan 27, 2015 9:36:44 AM com.hyperion.css.registry.RegistryManager RegistryManager
SEVERE: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PR
ODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
java.lang.NullPointerException
        at start.initialize(start.java:84)
        at start.Sample(start.java:59)
        at cc.main(cc.java:10)
I guess it is something with the SQLServer driver.Do you have any ideas?
My ORACLE_HOME and ORACLE_INSTANCE are set correctly.
Thanks in advance,
Regards,
Nicolas

Hello,
I finally got it working!
I added the weblogic libraries located under EPM/Middleware/wlserver_10.3/server/lib, and now it works fine.
It was a pain to find it out, because the error message did not specify that it was a missing library..
Anyway, if it helps, here is the list of external libraries I am using:
"wlssapi.jar"
"wlssapi-internal.jar"
"wlss-datatier.jar"
"wlss-descriptor-binding.jar"
"wlssdiameter.jar"
"wlssechosvr.jar"
"wlss-mbeaninfo.jar"
"WLSSSecurityProviders.jar"
"wlthint3client.jar"
"wlw-langx.jar"
"wlw-langx-ja.jar"
"wlw-langx-ko.jar"
"wlw-langx-zh_CN.jar"
"wlw-langx-zh_TW.jar"
"wlw-wsee-soapfault.jar"
"xmlparserv2_sans_jaxp_services.jar"
"xmlrpc-2.0.1.jar"
"audit-client.jar"
"castor-1.0.5.jar"
"com.bea.core.apache.commons.pool_1.3.0.jar"
"commons-lang-2.1.jar"
"css.jar"
"dms.jar"
"interop-sdk.jar"
"ojdl.jar"
"quartz.jar"
"regexp.jar"
"registry-api.jar"
"scheduler_ces.jar"
"sqljdbc.jar"
"wf_ces_utils.jar"
"wf_eng_agent.jar"
"wf_eng_api.jar"
"wf_eng_server.jar"
"wlcipher.jar"
"wlclient.jar"
"wlcommons-logging.jar"
"wlconnector.jar"
"wldb2.jar"
"wldeploy.jar"
"wlinformix.jar"
"wl-j2ee-client.jar"
"wljarbuilder.jar"
"wljmsclient.jar"
"wljmxclient.jar"
"wllog4j.jar"
"wlnmclient.jar"
"wlpool.jar"
"wlsafclient.jar"
"wls-api.jar"
"wlss.jar"
"wlss_i18n.jar"
Thank you all for your help.
Regards,
Nicolas

Sapinstallation error in second step Install common system File.

Hi,
I am installing the SOLMAN on Linux RHEL5 and i am facing the error in second step Install common system File .
sapinst.log ERROR Logs ;
Output of /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh is written to the logfile installsapinit.sh.log.
WARNING 2011-08-15 09:56:21.770
Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.774
MUT-03011 Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.913
FCO-00011 The step installSAPInit with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_System|ind|ind|ind|ind|system|0|installSAPInit was executed with status ERROR ( Last error reported by the step: Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found).
Can any one please help me on this...

Hello,
the "uname" command is part of the coreutils package on RHEL. Please check if the coreutils package is installed:
rpm -qa | grep -i coreutils
If the coreutils package is not installed you can install it with
yum install coreutils
Regards,
Frank

Error when activating datasource

Hello,
I am trying to create a new transaction data datasource assigned to a flat file source system. When i hit the check i get no errors but when i try to activate the activation fails with errors. The error Message No. RSO404 says "Error when activating Datasource". We are on BW 7.0 stack 12.
Has anyone seen this? It is hard to troubleshoot it when i get no real errors to go on. It is a very simple three field datasource with one characteristic, one key fig, and an additional currency characteristic. The key fig is in external format and references 0CURRENCY. Does anybody have any insight?
Thanks,
TMS

Hi TMS,
I am facing exactly the same problem here...
transactional datasource for flatfile gives me errors DO313, RSO404 and then RSDS106
We are on:
SAP_ABA            700               0011 SAPKA70011
SAP_BASIS     700               0011 SAPKB70011
PI_BASIS            2005_1_700 0011 SAPKIPYJ7B
SAP_BW            700               0012 SAPKW70012
FINBASIS            600               0008 SAPK-60008INFINBASIS
BI_CONT            703               0005 SAPKIBIIP5
SEM-BW            600               0008 SAPKGS6008
Did you manage to find a solution?

Error When Activating DataSource in BI

Hi,
I have created a Generice Data Source in source system and replicated the same in BI. I am getting error 'Error when activating Datasource '.
Kindly give me some suggestion how to rectify it.
Regards,
Sangeetha.A

Hi,
First check whether u have activated the data source in the transaction RSA6. Also, check whether the data source which you activated is listed in transaction RSA5.
Regards,
Krishna.

Error with transporting datasource

Hello,
I have an issue activating a datasource. I created a generic datasource called 'ZHIP_TD_CLOSE_INV_BALANCE' within BW - i.e the source is BI and NOT R/3. I created transformation from datasource to Cube and loaded data. Everything is working fine. Now when I transport the datasource from Dev to Quality the transport failed. The error log says 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310' & 'Error when activating DataSource ZHIP_TD_CLOSE_INV_BALANCE WP1CLNT310'. I do not have an infosource to begin with. So then when I go and try to activate the datasource in Quality, I get the same message i.e. 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310'. How do I fix the error and get the transports through? Remember, the existing config works fine in Dev. Thanks for your help in advance.
Thanks
Nisha

what objects are you trying to transport along with the data source ? If you have transfer rules along with this request then might be you would get this error. Also check if your source conversion is maintained correctly. you can check that in RSA1 > Tools > Conversion of Source system names.
Here maintain the system conversion. Once done, recreate a transport request with only data source and transport. Once done replicate and transport your other objects.

Event error extract in datasource 0FI_GL_4

Hi Guru's,
        please help me a serious problem.
In r/3 when Iam double cliking on my datasource I'm not able to display the datasource or change it.
the error displayed is MSG TEXT: [event with errors extract in datasource 0FI_GL_4].
I have enhanced the datasource as per 4.6 but here the version is ecc5 r/3.
even in rsa5 I'm not able see the datasource fields or change.
Regards
KM

Hi Robert,
     Event with errors Extract in DataSource 0FI_GL_4
     Message no. R8287
     Problem class very important
     Along with 0FI_GL_4 the folowing datasources are also having the same problem.0FI_GL_6,0FI_GL_7,0FI_TX_4.
    Please help us in this issue, waiting for your favourable answer.
Thanks & Regards
KL Chand

Error while transporting Datasources in Production

Dear All,
I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
Such errors have occured for most of the Datasources.
Can anyone let me know
1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
2) The possible solution to correct the error.
Request your kind help to overcome this problem.
Regards
Shalabh

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error with standart datasources

Hi all,
i'm activating standart datasources on CRM, i first transefered the application component hierarchy and second the data sources i want to use.
When i test any of the transfered data sources (RSA3) i get an error, the log says:
"The extraction program does not support object 0SLS_ACTIV_TEXT"
(taking 0SLS_ACTIV_TEXT as example).
Any clue on how to solve this ?
thx in advance.

solve it activating metadata for data sources on transaction BWA5.
thanks anyway.

Error while creating datasource

I am getting this error while creating the datasource on console of html page.
java.lang.NullPointerException
     at weblogic.management.console.utils.MBeans.getMBeanClassNameFor(MBeans.java:1153)
     at weblogic.management.console.actions.mbean.EditMBeanAction.getMBeanClass(EditMBeanAction.java:210)
     at weblogic.management.console.actions.mbean.EditMBeanAction.getDialogTypeKey(EditMBeanAction.java:188)
     at weblogic.management.console.actions.internal.InternalActionContext.setAction(InternalActionContext.java:158)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:170)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5360)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)

well thankx for the inputs. well but te screen dosent move from tht point. as we enter a datasource name, it gives this error. and we havent logged into anywhr to give the access credentials.
am wondering how then whts the point in knowing the username and pwd if i give edit datasource .
thankx

Error while creating datasource from table MBEWH

Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.

Hi Zakir,
      This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and   create one datasource...
   so, you need to check that   related table also.. for that MBEWH table..
    ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay

T4CConnection Error while creating datasource in SOA 11g

Hi All,
i getting the below error while creating the data source with an oracle database in oracle SOA 11g. I trying to create the datasource in the weblogic console page. The error is specifically coming while testing the database connection.
However, i am able to telnet the database box on this particular port.. Also this used to be a working connection earlier and i am able to create the same datasource from other similar SOA 11g instance...
the error details are:-
java.sql.SQLRecoverableException: IO Error: Connection reset
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:428)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at utils.dbping.main(dbping.java:204)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at oracle.net.ns.Packet.receive(Packet.java:293)
at oracle.net.ns.DataPacket.receive(DataPacket.java:104)
at oracle.net.ns.NetInputStream.getNextPacket(NetInputStream.java:315)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:260)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:185)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:102)
at oracle.jdbc.driver.T4CSocketInputStreamWrapper.readNextPacket(T4CSocketInputStreamWrapper.java:124)
at oracle.jdbc.driver.T4CSocketInputStreamWrapper.read(T4CSocketInputStreamWrapper.java:80)
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1136)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1113)
at oracle.jdbc.driver.T4C8TTIdty.receive(T4C8TTIdty.java:668)
at oracle.jdbc.driver.T4C8TTIdty.doRPC(T4C8TTIdty.java:575)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1120)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308)
please let me know in case any of you know the fix..

i also used the weblogic jar to do a db ping.. and it errored out with the above error. however if i db ping from any other app server it works... below is the success response from another server and the command used..
[applmgr@g3te2soa lib]$ java -classpath /u01/app/Middleware/wlserver_10.3/server/lib/weblogic.jar utils.dbping ORACLE_THIN apps appsuat abc1.xyz.net:1525:oru1
**** Success!!! ****
You can connect to the database in your app using:
java.util.Properties props = new java.util.Properties();
props.put("user", "apps");
props.put("password", "appsuat");
java.sql.Driver d =
Class.forName("oracle.jdbc.OracleDriver").newInstance();
java.sql.Connection conn =
Driver.connect("jdbc:oracle:thin:@abc1.xyz.net:1525:oru1", props);
is it some netwrok issue.. but why is then the telnet working for the same server on this port ????

Error WAD second Datasource

Similar Messages

Maybe you are looking for