Error: web template does not exist in master system

I have Bex 7x query. I wnat to publish it on SAP enterprise portal (EP 7.0 SP19).
When I create a Bex iview and provide link of query, I get following error in preview:
The webtemplate <queryname> does not exist in master system.
Could you please let me know what can be the root cause of this error?
Regards,
Deepti

Dear Deepti,
Can you please make sure that Web template "0ANALYSIS_PATTERN" is acive in your system. If not, please activate it from
Business content.
You can check this by following below steps:
Please run TX SE38 and Execute Report RS_TEMPLATE_MAINTAIN_70 and enter the template name and execute.
If you could see the HTML code , this means it is activated.
Could you also please confirm me the settings you have in TX RSCUSTV27.
Regards,
Arvind

Similar Messages

The Web template does not exist in the master system

We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?

Make sure the template exists in the system which is configured in the iView property.
There should be a one to one mapping between BI and EP systems.
You cannot connect 2 BI system to one EP system and configure BI JAVA

WEB TEMPLATE DOES NOT EXIST IN Q

Hello
First we created 15 reports in D and transported those reports to Q. Everything worked fine.
Then we created 3 new reports in D. The wemtemplate assigned to those reports is a new webtemplate created saving an already existing webtemplate (an which is already transported to Q) with a new name.
The 3 new reports work in D. But once transported to Q, they don't work there:
The initial exception that caused the request to fail was:
The Web template "Z..." does not exist in the master system
Please, does anybody know the solution for this issue?
Thanks in advance!
Jon

Can you open the new web template in the Q system using the web application designer? It seems, looking at the error message, that it is not transported.

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Tax Code does not exist in the system (T007A)

Hi All
When we try to create a receipt for a particular expense type in ESS Travel & Expenses, we get the follwing error "Tax code Z0 does not exist in the system (T007A)". Upon creating a tax code Z0 it gives the following error "Tax code does not exist in the system (T007A)". When we change the Receipt currency to USD instead of Bristish Pound it gets accepted without the error. It works perfectly fine when expense report created using GUI. The error occurs only when we create the expense report using Portal ESS T&E. I was not able to find anything related to this in the SDN. If any of you could help me out, that would be great.
Thanks, Raj

Hello Mr. Raj!
I checked the related issues that other customers reported.
I came up with a list of things you can try that may help you solve your issue.
a) Check if the field V_706D_B-LAND1 is filled with the home country in the IMG step 'Define Global Settings'. So may I ask you to check. Moreover, if this is not the reason, may I also ask you, if you get the same error when using our backend test transaction PR_WEB_1200? Thank you,
b) Could you please check that you don't have any expense type with value " "(blank) in the tax code field in V_T706B1?
c) Apply Note 1129853 - Web: Input tax code for credit card receipts
d) Please follow in IMG:
Financial Accounting
Travel Management
Travel Expenses
   Master Data
    Control Parameters for Travel Expenses
     Define Global Settings
Input Tax
Country                                       { Your country here }
Enter an input tax code for 0% input tax [    ] <<<
If here it's blank, this must be filled with a tax code. I found this out when I set the field "Input Tax per Travel Expense" then I get a warning "Enter an input tax code for 0% input tax".
The reason for this is that in your system, you don't have a "blank" tax code and it looks for this entry. Please kindly define a tax code in this setting.
I hope I was able to help you with this information.
Wilian Segatto
SAP Support - HCM/XSS

PO does not exist in the system

Hi,
While creating sales order PO not given and saved the Sales order with out PO No. Again in change mode realised that PO not given and when im trying to give PO following are the error message.
Purchase order 428264 does not exist in the system (see long text)
Message no. V1583
Kindly send the responses.
Thanks
Madhu.

Hi,
I am taking two different posts from this thread:
1st:
1. Sales order been created with out PO number.
2. In the change mode system allows to key in PO number.
3. When keying in the PO number system throws an error ' PO 12345 does not exist in the system".
Now my query is how to find the right PO number.
Following are the long text.
Purchase order 12345 does not exist in the system (see long text)
Message no. V1583
Diagnosis
You are creating an order for a consolidated company and must eliminate internal business volume. For this reason, the system tries to determine if the related purchase order exists. This is not the case, however.
Procedure
Enter the relevant purchase order number
This sounds as you go to T. Code: VA02, Keyed-in your Sales Order No. and then hit "Enter". Now inside Sales Order, you are trying to key-in P.O. No.
Now, 2nd post:
Im sorry the issue is not resolved yet. The PO No which user is keying in the sales order is quite unique. When i checked the previous PO's in that series it is there. But the issue is for the given set of sales area it is not there.
Following are the steps performed:
1. In VA02 in search critria given the series (OCJ*).
2. There are set of sales orders available for the given series.
3. But these series of sales order are from different set of sales area.
4. There are no sales order available in the series for the given sales area.
Kindly suggest whether im missing any config setting?
Which suggests as you go to T. Code: VA02, and inside field: Sales Order, you Press F4 (or you have entered P.O. No. under Tab: Search Criteria).
Now, there are few queries:
1. Have you entered P.O. No. within Sales Order, while created? If not, then how come System will search for Sales Order, having specified P.O. No.?
Secondly,
If, you are searching through F4 and you have created Sales Order with the same P.O. No., then within new window that pops-up; go to tab: Sales Document according to Customer PO No.
Field: Purchase Order No.
key in your filter condition (P.O. series with appropriate *) and make Field: Maximum hits, blank. System will throw all the Sales Order, having P.O. Series based upon filter condition.
Now, SORT the output based upon either "Purchase Order No." or "Sales Org".
Hope, i have understood your query, now.
Best Regards,
Amit.
Note: Remember, if there is no such Sales Order with desired P.O. No., system will not list-out it in search. To do so, you have to attach P.O. No. within Sales Order under field: Purchase Order.

Support, please add a place for the Z30 and fix the "The specified template does not exist or is empty" error on this page

Please get the web site designers to fix this forum. There is no Z30 "place" and there is an error message that shows up every time.
The specified template does not exist or is empty

Make sure the SharePoint Server is joined to Active Directory. Also validate that the Web Application Application Pool account is running as a Domain User (rather than say Network Service).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Error: Requested resource does not exist with SAP WebAS..deployed an ear

hi,
i deployed an application using SDM gui deployement manger.   the application is built using struts,spring etc. I have also created a datasource with Oracel 9i succesfully and hav associated it with the application.
When i try to access the application using the struts based path i get an "<b>ERROR 404:- Error: Requested resource does not exist</b>". I also tried accessing the index.jsp page directly without struts paths but dont know why i get an error "<b>File [appContext/admin/index.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].</b>"
The same ear is working perfectly fine with IBM WSAD but not in SAP Web AS ?? is there any configuration issues that i need to address ?? Kindly help me ASAP !!
Regards,
Vaibhav

Hi,
The Required server log contents are as follows:-
#1.5#000CF1AFC124017A000000020000067000041B1D550F525C#1155712701853#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server#Plain###Runtime error in compiling of the JSP file <C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp> !
The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
     com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
Exception id: [000CF1AFC124017A000000000000067000041B1D550F4D94]#
#1.5#000CF1AFC124017A000000030000067000041B1D550F5C88#1155712701868#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/doculine#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error##Plain###Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:117)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.getClassName(JSPServlet.java:238)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.compileAndGetClassName(JSPServlet.java:429)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:169)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
     at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1001)
     at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:560)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:209)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
     com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.validate(JSPParser.java:243)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.initParser(JSPParser.java:348)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:105)
     ... 37 more
#1.5#000CF1AFC124017A000000050000067000041B1D550F5F94#1155712701868#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server/WebRequests#Plain###Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
Exception id: [000CF1AFC124017A000000030000067000041B1D550F5C88]#

DBCA in silent mode gives "template does not exist" error

We successfully created a database using the DBCA in silent mode like this:
dbca -silent -responseFile dbca.rspThen, attempting to create a second database on the same machine with a slightly different response file, we get the following error:
dbca -silent -responseFile dbca.rsp2
Template General Purpose does not exist. Please specify an existing template for database creation.The "General Purpose" template was used in the original database creation. It does exist. No logfile is created. Any ideas what could be causing this?

We never did get to the bottom of the mysterious "template does not exist" error, but went with a solution that is better:
1. we used the already-existing database to create a clone template:
dbca -silent -createCloneTemplate -sourceDB OLD_SID -sysDBAUserName sys
-sysDBAPassword XXXX -templateName old_sid_copy.dbc
-maintainFileLocations true
-datafileJarLocation /local/opt/oracle/product/10.2.0/assistants/dbca/templates (Note the use of the -maintainFileLocations switch)
2. edited the template file, replacing all instances of OLD_SID with NEW_SID
/local/opt/oracle/product/10.2.0/assistants/dbca/templates/old_sid_copy.dbc
3. create the clone using the new template
dbca -silent -createDatabase -templateName old_sid_copy.dbc
-gdbname NEW_SID.MYHOST.COM -sid NEW_SID
-datafileJarLocation /local/opt/oracle/product/10.2.0/assistants/dbca/templates
-responseFile NO_VALUE -characterset WE8ISO8859P1

Template interpretation failed. Template does not exist.

Hi Gurus,
We are configuring SRM 7.0 ( SPS06) with ECC6 ( Ehp4) without Portal, but when I go to Webbrowser ( SiCF..BBPSTART service) and click on any function like Shop...the gives error 'Template interpretation failed. Template does not exist. " ....after going throug some threads we added ~GENERATEDYNPRO' with value '1'u2026.in Service BBPSC02..etc...then system shows SAP GUI screen in the web Browser for Shop function for example...
Since in the Config Guide. for SRM 7.0..To configure the portal-independent navigation frame...we need to define below steps..
1. RFC connection of type H (HTTP) to the SAP ERP back-end system under SM59
2.Enter the HTTP connection defined above, but without the suffix, in the Customizing activity Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
3.Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business Client (NWBC) for HTML.......which is not defined yet....
Can anyone please confirm me..whether I'm right or anything need to be corrected ...
Thank you in advance.
Regards
Naren

Thanks.
Now I am able to see SRM web browser Screen w/O Portal ...its really nice compare to SRM5.0
As per Config guide It happned after doing below steps .....
SAP Supplier Relationship Management (SAP SRM) supports various flexible deployment variants.
Note
You can use the flexible deployment variants in SAP Supplier Relationship Management 7.0 (SAP
SRM 7.0) on SAP enhancement package 1 for SAP NetWeaver 7.0 SPS06.
3.1 Portal-Independent Navigation Frame and Inbox
3.1.1 Portal-Independent Navigation Frame Configuration
Using the Portal-independent navigation frame, you can use SAP Supplier Relationship Management
(SAP SRM) applications without using SAP NetWeaver Portal.
Procedure
To configure the portal-independent navigation frame, proceed as follows:
1. In Customizing for SAP Supplier Relationship Management, define the following settings:
n Activate the Portal-independent navigation frame in Customizing for SAP Supplier
Relationship Management under SRM Server Technical Basic Settings Portal-Independent
Navigation Frame Activate/Deactivate Portal-Independent Navigation Frame .
n Define an RFC connection of type H (HTTP) to the SAP ERP back-end system under SRM
Server Technical Basic Settings Define RFC Destinations , or use transaction SM59. The name of
the connection must end with one of the following character sequences:
l For a non-secure connection, use_HTTP.
Example: SAP_ERP_HTTP.
l For a secure connection, use _HTTPS.
Example: SAP_ERP_HTTPS.
n Enter the HTTP connection defined above, but without the suffix, in the Customizing activity
Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
n Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in
transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business
Client (NWBC) for HTML.
Thnaks

Error message "resource does not exist"

C6; have unistalled and reinstalled ovi store three times; now I get into the store, but when attempting to download app, get error message "resource does not exist". what is that???

hey guys just updating you all.. i wrote previously how my ovi store wasn't working, it gave me an error message 'resource does not exist'. i did soft/hard reset, also uninstalled ovi store and reinstalled STILL it wasn't working. It lasted a day. And today it's working fine. i think it was a problem with their server. It sorted it self out
But guys i did contact the team, and i got a reply that said i should do the following if it still doesn't work:
1. GO TO MENU
2. GO TO INTERNET
3. CLICK ON WEB
4.GO TO OPTIONS
5. GO TO CLEAR PRIVACY DATA
6. DELETE CATCHE AND COOKIES
That should apperantly work.
If not guys, then i wouldn't worry. Just like mines, yours should sort it self out

Error: Object "Dot11BandSelect" does not exist.

Has anyone else received Error:Object "Dot11BandSelect" does not exist. when configuring the 802.11 settings on a 4400 WLC runing ver. 6.0.196.0
If so what did you do to resolve it.
Thanks
Barry

6.0.196.0 is a deferred code.
http://www.cisco.com/web/software/Wireless/Deferral/Software_Advisory_6_0_196_0.html
Are the global band select enabled, are you getting this error when enabling bandselect on a WLAN's advanced tab.

Error - Account group does not exist, check classification assignment

Hi Guys,
I am having an BP replication issue from CRM to R3 when i create BP from Web IC with role UTIL_IC. BP gets replicated to R3 if i create BP from GUI.
Bdoc Error - Account group does not exist, check classification assignment
i have completed all the required configuration as below
Setup of no range for BP and assigned to grouping
PIDE settings in R3
Setup if account identification profile in IS solutions
Thanks,
Nitin

Nitin,
Refer to [this|BP replication error; &[this|Contact Person Replication From CRM to R/3; thread.

ALE error - variant LOGSYS does not exist?

In trying to setup ALE within SAP (ECC 5.0) to send a material master IDOC from the ERP to XI. I followed the ALE Quick Start guide and several other resources on the net including IDOC Cookbook and others. When I try to select transaction BD10 (Send Material Master), it returns the following error:
Variant LOGSYS does not exist
The long text is:
Variant LOGSYS does not exist
Message no. DB612
Diagnosis
You selected variant LOGSYS for program RBDSEMAT.
This variant does not exist.
Procedure
Correct the entry.
In trying to narrow down the problem, I created a minimal scenario of just sending the MATMAS IDOC from one client to another on the same system and I get the same error.
My first thought was the logical systems for the two
clients were not setup correctly, but they seem okay. I'm using the 'PRODUCTION' logical system that came with the IDES version we installed (client 811) and trying to send to a new client I setup as logical system VM1CLNT300 (client 300) on the same system.
RFC Destinations test okay, partner profiles, ports, and the distribution model seem okay.
Googling for that error message above produced nothing that I could get an answer from. Any ideas?
Thanks,
-tim

Yes, both logical systems are there. Additionally, each
client has been set to the appropriate logical system:
client 811 -> PRODUCTION logical system
client 300 -> VM1CLNT300 logical system
-tim

Copy response to FTP Device failing - ERROR: E_NOENT - File Does Not Exist

I have a asset subscription that encodes and delivers to a FTP server when a checkbox is ticked in an asset's metadata.
Whilst the clip is transcoded and delivered, the copy response reports a failure with the message: 'ERROR: E_NOENT - File Does Not Exist: <filename>.<eextension>' referring to the transcoded file
The subscription has 3 responses, A WMV, a FLV and a JPG compression, all of which work if I export the asset manually.
It doesn't matter which response I put first in the Subscription as they all report the error and stop the other 2 responses.
I have had a search through the previous discussions, but couldn't find any answers.
I am running a fresh install of OSX Server 10.5.5 with just Final Cut Server installed, and everything is up to date (Pro Apps and FCSvr, Java etc).
The only other apps installed are:
Fibrejet 2.7.3
Flip4Mac WMV Studio Pro HD 2.2.1.11
Adobe CS3 Flash Video Encoder

I am having a similar issue. All I am trying at the moment is a nuts and bolts copy to an FTP device. I have checked and rechecked remote directories, permissions, and login info. My copy response will transcode to a web-friendly quicktime, then fails trying to copy, saying the file doesn't exist.
I think I am missing a fundamental part of the process but reading through the manuals hasn't turned up solutions.

Error: web template does not exist in master system

Similar Messages

Maybe you are looking for