Error whe displaying more than one message in af:messages

Hi all,
I'm having an issue trying to display many messages in the af:messages component. While debugging, I have watched the FacesContext and they are all there (let's say there are 4 messages) and only the last one is displayed when we come back to the page...
any ideas?

Forget it!! I just forgot to set the first parameter when adding a message to the context (wrong interpretation of its purpose!)

Similar Messages

Error: You have more than one Creative players connected. - Recovery Tool for ZEN

My Zen 4GB cannot be turned on anymore after a failed firmware upgrade (The installation hung up). I tried to run the firmware upgrade executable file again but the player must be on. So I tried to hardware reset by switching the power slide on while pressing the play button, but it still doesn't start. I downloaded and ran the Recovery Tool while the player was connected, but an error message appeared: "ERROR: You have more than one Creative players connected. Please remove all but one, click "OK" to exit and then run this program again." - There was no other players connected but the ZEN. Please help... What can I do

I have this very exact same problem with the same model. Did you ever find a solution to this?

Reply to More than One Message ??

How can I reply to more than one message at a time? In other words the same answer for say 20 emails.
I tried applying a rule and it didn't take.
Thanks

Hi,
If all the intended recipients are in your Address Book you could add them to a Group there and then Email the Group.
You could manually Add all the Address to the Address Field.
It is fair to say that some people don't like that as all the Email Address appear on all the sent emails and that might "break" some peoples' idea of Privacy.
You could put them all in the BCC field (once you have displayed it) but then again some people have filters against receiving those.
9:51 PM Monday; February 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How do I display more than one region as a modal popup?

Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
     modal: true,
     autoOpen: false,
     width: 650,
     height: 450,
     buttons:{ Calculate: function(){calculateTotal();},
                     Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
    {$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.

Magali wrote:
Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
{$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.First build your dialog for new ID (please replace NEWREGIONID with your region static id)
$( function(){
$('#NEWREGIONID').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
And now you could open or close the dialog
$('#NEWREGIONID').dialog('open');

How to display more than one documents on windows 8 desktop?

how to display more than one documents on windows 8 desktop?

Adobe Reader Touch doesn't show more than one file on screen and doesn't show them on the desktop. Apparently these are very old fashioned things that Microsoft doesn't think we'll want to do any more and calls them "legacy" to make them sound antiquated.
If you want to do these things use the legacy Adobe Reader, a much more powerful and flexible app (and not obsolete in the slightest). http://get.adobe.com/reader . There are no legacy apps in the Windows App Store.

Can I delete more than one message at a time

Is it possible s to delete more than one message at a time and can I stop it putting them back on my phone once deleted??
any help would be appreciated.
thanks
allisongs

This question was answered here I think:
https://discussions.apple.com/message/6799512#6799512

HT6114 I cannot select more than one message at a time to delete from the trash. Any ideas will be appreciated

I cannot select more than one message at a time to delete from the trash. I did not have this problem before I updated to Maverick. What am I doing wrong?

This works in many different ways and in lots of apps.
Hold down the command key and you can select from a list (leaving some not checked) to exclude them from the delete process.
To empty all of the trash folder use command-a keys to "select all" and then the delete key to remove them.

How do I select more than one message at a time for archiving

I want to archive multiple messages into one archive folder. How do I select more than one message at a time?

Really appreciate the help. Many thanks

How to handle more than one message coming from an async BPEL in a sync BPEL process?

Here is the scenario,
Sync process A is calling an Async process B and Async process B is developed in such a way that it is returning more than one message to sync process A, how you will handle those messages in sync process A?

As durga said, its a wrong design, you will have issues in real time. You wont get the response back most of the time. It can be otherway around, async is waiting for sync process.
Change your design or provide what is your use case below, we can think of which design suits you.
Thanks,
Vijay

Displaying more than one display attribute in a tree component problem

Hi,
I have a parent table and child table, I want to display a parent table's display attribute and below that i want to display child tables two display attributes (while defining the rule for a tree compoment).
What i'm getting is :
I can able to display more than one "display attributes" for my parent table, but when i'm trying to implement that for my child table under my parent table. I am only geting the blank folder structure without names.
For example:
Parent table: Deparetment(id, name)
child table: Employee(id, firstName, lastName)
What i want is:
In a Tree:-
(Department name): software below that i want display both (firstName and LastName) stephen Fleming
for that employee.

Hi,
do you use ADF ? If yes, have a look at "master table with inline detail" option when dragging the master View
Frank

Displaying more than one column in TreeControl

Hi,
I have three tables ( LaborOperation, LaborIndex, LaborData). In TreeControl, i am displaying the following table columns,
LaborOperation ->operationid,
LaborIndex -> indexid,
LaborData -> date, value.
i want to be like this.
+ Operation Id(Single Column)
+ OperationIndex(Single Column)
-OperationData(Multiple Column)
I can able to display single column values in tree control by setting the nodedifinition property in tree control. i can't able to display more than one column in tree control.
any idea about this problem
thanks in advance.
-Nainar

Arun Prasath wrote:
I want to display more than one row in a multiple columns of a single row.
For example,
In oracle apps, there are multiple tax lines for a single invoice. Each tax lines having their own entry in tax detail table.
When i try to display a single invoice's details in a single row i found the difficulty.Hmm did you see the title of the forum? Oracle Database » General Questions !
May be you want to check the Oracle Apps forum?
Aman....

How to display more than one column with for each

Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1     Item2     Item3
Item4     Item5     Item6
Item7     Item8     Item9
Item10
End for each

Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser

Display more than one interactive report on a page

Hi,
is it possible to display more than one interactive report on a page.
Thanks for any idea
Norbert

You can't display two on one page, but it is possible to have multiple conditional interactive reports. See Duncs most excellent blog:
http://djmein.blogspot.com/2008/03/multiple-interactive-reports-on-one.html
This is probably an unsupported approach.
Cheers
Shunt

Error- Enter no more than one partner type of location

Hi,
Iam using SRM4.0,
iam facing one error message "Enter no more than one partner type of location"when user approving the shopping cart
pleae needs your help
Raghuveer.B

Hi,
check whether the note 1155724 is relevant four your release (the text may be not relevant, but the coding shold help).
If you have any BBP_DOC_CHANGE_BADI implementation deimplement it and retest.
Regards,
Peter

How to create combobox to display more than one columns

I need kind help with the following question. As the combobox includes two pieces--textbox and the combobox list. Then how to create a combo box bean, which is based on table EMP(empno number(6), ename varchar2(40)) records for example, to achieve these features:
1) allow more than one columns to be displayed in its records list--e.g., I need to show these records:
empno (value) ename (label)
103 David M Baker
104 David M Baker
105 Kelly J Volpe
106 Krista F Carpenter
107 Michelle P Silverman
The two 'David M Baker's are different employees, but unfortunately, with the same name.
2) allow combo box list to return the column value 'empno' even though it shows both columns as above. i.e., if user picks the second record above, then the combobox list returns 104 to the textbox in the background, but the 'David M Baker' is displayed on the textbox. Of course the combobox list may return 'David M Baker' if needed when there is only one column in the list as the current standard feature.
3)allow partial match search by typing in some letters. i.e., if user types in the textbox of the combobox letter 'K' or 'k' then the partially matched records
105 Kelly J Volpe
106 Krista F Carpenter
should be automatically displayed in the combobox list, not the whole list as above; then user may double click to choose one of the two or if user continues to type in 'R' or 'r', then the uniquely matched record 'Krista F Carpenter' is displayed in the textbox and the 106 is returned to the textbox.
4) as a bonus if it's doable, allow combobox to return values to different textboxes when its records list has more than one columns.
The reason I need these features is that I am working on the project migrated from Microsoft Access applications to centralized Java version web application. We at beginning promised to users community that Java swing will provide all the GUI user friendly features Microsoft Access has, but now we got stucked--we ate our words and got tons of complains from our users community. This is just the most needed component I posted here. I really hope that Java would add all the default GUI user-friendly features to compete with MS since its Win95 GUI has been accepted as industry standard. And most users are used to it. They claimed that they don't know and don't care what tool you use the newly created application should be more user friendly, not the opposite.
I would be very much appreciated if any one would help me with this item.

Thanks for your comments. I think nobody expects Sun to write everything including special features for its components. But I do think Sun should provide at least those standard user-friendly features for the GUI components because most users have been used to the GUI user-friendly features provided by Win95 and Access/Excel applications. Then this will help us to productively create applications to beat MS applications.
Other wise like me, to get the existing GUI features, existed in old MS Access application, for our migrated Java application, I must re-create the GUI components library first which is a big burden to me at least, for others it might be fun for coding on their own from scratch, but I have to focus on the timing of project.
If you really can pass the request to Sun and push them move a bit, please pass these words: before Sun starts to revise them, please play around window GUI, e.g., Access/Excel applications, then plan what to do, the bottom line is to equally match or better than them in FUNCTIONALITY(Look and feel is not my focus here). Don't ignore the influence of Windows regardless of you hate it or love it, the reality is most users are so familiar with windows GUI features which are accepted as industry standard. Thus the choice is to match or better to beat them. Don't make your car by closing your door, don't assume users will like what you come out in a closed room.

Error whe displaying more than one message in af:messages

Similar Messages

Maybe you are looking for